! Started logfile: /vlbi/uf001/uva//J1036-0605_S_dfm.log on Mon Jan 14 00:57:39 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1036-0605_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1036-0605_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.959788 visibilities/baseline/integration-bin.
! Found source: J1036-0605
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5442 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1036-0605_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.054155Jy  sigma=19.484960
! Fit after  self-cal, rms=0.730450Jy  sigma=13.699321
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.696 mas, bmaj=6.977 mas, bpa=-3.558 degrees
! Estimated noise=0.707167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204057 Jy
! Component: 100  -  total flux cleaned = 0.264284 Jy
! Total flux subtracted in 100 components = 0.264284 Jy
! Clean residual min=-0.020921 max=0.091730 Jy/beam
! Clean residual mean=-0.000024 rms=0.006470 Jy/beam
! Combined flux in latest and established models = 0.264284 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.264284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.153344Jy  sigma=2.567854
! Fit after  self-cal, rms=0.153247Jy  sigma=2.565644
! Inverting map 
! Added new window around map position (5.5, 5.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725155 Jy
! Component: 100  -  total flux cleaned = 0.100682 Jy
! Total flux subtracted in 100 components = 0.100682 Jy
! Clean residual min=-0.016456 max=0.028292 Jy/beam
! Clean residual mean=-0.000020 rms=0.003657 Jy/beam
! Combined flux in latest and established models = 0.364967 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.364967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110436Jy  sigma=1.718896
! Fit after  self-cal, rms=0.105357Jy  sigma=1.613826
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248665 Jy
! Component: 100  -  total flux cleaned = 0.0399633 Jy
! Total flux subtracted in 100 components = 0.0399633 Jy
! Clean residual min=-0.014886 max=0.016656 Jy/beam
! Clean residual mean=-0.000014 rms=0.002584 Jy/beam
! Combined flux in latest and established models = 0.40493 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 37 components and 0.40493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097112Jy  sigma=1.462737
! Fit after  self-cal, rms=0.096703Jy  sigma=1.453671
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=7.755 mas, bpa=-3.09 degrees
! Estimated noise=0.572957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139037 Jy
! Component: 100  -  total flux cleaned = 0.0204519 Jy
! Component: 150  -  total flux cleaned = 0.0229214 Jy
! Component: 200  -  total flux cleaned = 0.0235328 Jy
! Total flux subtracted in 200 components = 0.0235328 Jy
! Clean residual min=-0.013937 max=0.010405 Jy/beam
! Clean residual mean=-0.000016 rms=0.002054 Jy/beam
! Combined flux in latest and established models = 0.428463 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 57 components and 0.428463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093606Jy  sigma=1.410586
! Fit after  self-cal, rms=0.093475Jy  sigma=1.407941
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.206 x 7.755 at -3.09 degrees (North through East)
! Clean map  min=-0.013983  max=0.25867 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.98     KP        1.04     
!   LA        1.00     MK        1.09     NL        1.10     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.97     HN        0.97     KP        1.04     
!   LA        0.97     MK        1.03     NL        1.12     OV        0.98     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.01     HN        0.97     KP        1.02     
!   LA        0.97     MK        1.00     NL        1.10     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.093475Jy  sigma=1.407941
! Fit after  self-cal, rms=0.080664Jy  sigma=1.329764
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=7.697 mas, bpa=-2.374 degrees
! Estimated noise=0.573796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474928 Jy
! Component: 100  -  total flux cleaned = 0.000473449 Jy
! Component: 150  -  total flux cleaned = 0.000479379 Jy
! Component: 200  -  total flux cleaned = 0.000608572 Jy
! Total flux subtracted in 200 components = 0.000608572 Jy
! Clean residual min=-0.007276 max=0.007015 Jy/beam
! Clean residual mean=-0.000009 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.429071 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.429071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080193Jy  sigma=1.320483
! Fit after  self-cal, rms=0.080168Jy  sigma=1.320072
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080168Jy  sigma=1.320072
! Fit after  self-cal, rms=0.077508Jy  sigma=1.288133
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.22 mas, bmaj=7.706 mas, bpa=-2.207 degrees
! Estimated noise=0.572424 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000415899 Jy
! Component: 100  -  total flux cleaned = 0.000422101 Jy
! Component: 150  -  total flux cleaned = 0.000421409 Jy
! Component: 200  -  total flux cleaned = 0.000421742 Jy
! Total flux subtracted in 200 components = 0.000421742 Jy
! Clean residual min=-0.006608 max=0.007107 Jy/beam
! Clean residual mean=-0.000004 rms=0.001351 Jy/beam
! Combined flux in latest and established models = 0.429493 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.429493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077316Jy  sigma=1.285017
! Fit after  self-cal, rms=0.077323Jy  sigma=1.284791
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (37, -53).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115528 Jy
! Component: 100  -  total flux cleaned = -0.00135891 Jy
! Component: 150  -  total flux cleaned = -0.00170246 Jy
! Component: 200  -  total flux cleaned = -0.00185548 Jy
! Total flux subtracted in 200 components = -0.00185548 Jy
! Clean residual min=-0.005745 max=0.005139 Jy/beam
! Clean residual mean=-0.000003 rms=0.001238 Jy/beam
! Combined flux in latest and established models = 0.427637 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 97 components and 0.427637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075944Jy  sigma=1.268947
! Fit after  self-cal, rms=0.075895Jy  sigma=1.267877
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075895Jy  sigma=1.267877
! Fit after  self-cal, rms=0.069091Jy  sigma=1.185773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=7.729 mas, bpa=-2.273 degrees
! Estimated noise=0.571311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168745 Jy
! Component: 100  -  total flux cleaned = -0.000221962 Jy
! Component: 150  -  total flux cleaned = -0.000569069 Jy
! Component: 200  -  total flux cleaned = -0.000646428 Jy
! Total flux subtracted in 200 components = -0.000646428 Jy
! Clean residual min=-0.003042 max=0.002795 Jy/beam
! Clean residual mean=-0.000002 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.426991 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 117 components and 0.426991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068842Jy  sigma=1.181200
! Fit after  self-cal, rms=0.068842Jy  sigma=1.180890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.62323e-06 Jy
! Component: 100  -  total flux cleaned = -6.1824e-05 Jy
! Component: 150  -  total flux cleaned = -6.43415e-05 Jy
! Component: 200  -  total flux cleaned = -0.000180006 Jy
! Total flux subtracted in 200 components = -0.000180006 Jy
! Clean residual min=-0.002913 max=0.002605 Jy/beam
! Clean residual mean=-0.000002 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.426811 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 126 components and 0.426811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068731Jy  sigma=1.178904
! Fit after  self-cal, rms=0.068725Jy  sigma=1.178859
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068725Jy  sigma=1.178859
! Fit after  self-cal, rms=0.068789Jy  sigma=1.178247
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.26 mas, bmaj=12.75 mas, bpa=-1.999 degrees
! Estimated noise=0.742207 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000770192 Jy
! Component: 100  -  total flux cleaned = -0.000716574 Jy
! Component: 150  -  total flux cleaned = -0.000714265 Jy
! Component: 200  -  total flux cleaned = -0.000672759 Jy
! Total flux subtracted in 200 components = -0.000672759 Jy
! Clean residual min=-0.003092 max=0.002883 Jy/beam
! Clean residual mean=-0.000005 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.426138 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 147 components and 0.426138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068758Jy  sigma=1.177609
! Fit after  self-cal, rms=0.068755Jy  sigma=1.177564
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.7077e-05 Jy
! Component: 100  -  total flux cleaned = 1.96503e-05 Jy
! Component: 150  -  total flux cleaned = 1.90869e-05 Jy
! Component: 200  -  total flux cleaned = 4.53291e-05 Jy
! Total flux subtracted in 200 components = 4.53291e-05 Jy
! Clean residual min=-0.003070 max=0.002819 Jy/beam
! Clean residual mean=-0.000005 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.426184 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 163 components and 0.426184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068748Jy  sigma=1.177353
! Fit after  self-cal, rms=0.068745Jy  sigma=1.177332
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=7.728 mas, bpa=-2.239 degrees
! Estimated noise=0.57086 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.206 x 7.728 at -2.239 degrees (North through East)
! Clean map  min=-0.0028084  max=0.25573 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.677 mas, bmaj=6.977 mas, bpa=-2.772 degrees
! Estimated noise=0.707154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.21242 Jy
! Component: 100  -  total flux cleaned = 0.299906 Jy
! Component: 150  -  total flux cleaned = 0.342619 Jy
! Component: 200  -  total flux cleaned = 0.368112 Jy
! Total flux subtracted in 200 components = 0.368112 Jy
! Clean residual min=-0.005483 max=0.013543 Jy/beam
! Clean residual mean=-0.000002 rms=0.001749 Jy/beam
! Combined flux in latest and established models = 0.368113 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.368113 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=7.728 mas, bpa=-2.239 degrees
! Estimated noise=0.57086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210631 Jy
! Component: 100  -  total flux cleaned = 0.0336798 Jy
! Component: 150  -  total flux cleaned = 0.0416432 Jy
! Component: 200  -  total flux cleaned = 0.0470628 Jy
! Total flux subtracted in 200 components = 0.0470628 Jy
! Clean residual min=-0.002680 max=0.003383 Jy/beam
! Clean residual mean=-0.000002 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.415175 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 78 components and 0.415175 Jy
! Inverting map 
! Added new window around map position (9, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00394445 Jy
! Component: 100  -  total flux cleaned = 0.00627576 Jy
! Component: 150  -  total flux cleaned = 0.00748543 Jy
! Component: 200  -  total flux cleaned = 0.00841886 Jy
! Total flux subtracted in 200 components = 0.00841886 Jy
! Clean residual min=-0.002668 max=0.002360 Jy/beam
! Clean residual mean=-0.000002 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.423594 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 0.423594 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.26 mas, bmaj=12.75 mas, bpa=-1.999 degrees
! Estimated noise=0.742207 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184517 Jy
! Component: 100  -  total flux cleaned = 0.00203304 Jy
! Component: 150  -  total flux cleaned = 0.00218153 Jy
! Component: 200  -  total flux cleaned = 0.00234897 Jy
! Total flux subtracted in 200 components = 0.00234897 Jy
! Clean residual min=-0.003052 max=0.002776 Jy/beam
! Clean residual mean=-0.000005 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.425943 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111068 Jy
! Component: 100  -  total flux cleaned = 0.000242934 Jy
! Component: 150  -  total flux cleaned = 0.000358853 Jy
! Component: 200  -  total flux cleaned = 0.000410438 Jy
! Total flux subtracted in 200 components = 0.000410438 Jy
! Clean residual min=-0.003041 max=0.002695 Jy/beam
! Clean residual mean=-0.000005 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.426354 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 143 components and 0.426354 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=7.728 mas, bpa=-2.239 degrees
! Estimated noise=0.57086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.35368e-05 Jy
! Component: 100  -  total flux cleaned = 0.000143445 Jy
! Component: 150  -  total flux cleaned = 0.000180467 Jy
! Component: 200  -  total flux cleaned = 0.000214378 Jy
! Total flux subtracted in 200 components = 0.000214378 Jy
! Clean residual min=-0.002741 max=0.002378 Jy/beam
! Clean residual mean=-0.000003 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.426568 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 163 components and 0.426568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068563Jy  sigma=1.173499
! Fit after  self-cal, rms=0.068528Jy  sigma=1.173128
wmodel J1036-0605_S_map.mod
! Writing 163 model components to file: J1036-0605_S_map.mod
wobs   J1036-0605_S_uvs.fits
! Writing UV FITS file: J1036-0605_S_uvs.fits
wwins  J1036-0605_S_map.win
! wwins: Wrote 4 windows to J1036-0605_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00046992 Jy
! Component: 100  -  total flux cleaned = -0.000146185 Jy
! Component: 150  -  total flux cleaned = -0.000144304 Jy
! Component: 200  -  total flux cleaned = -6.87636e-05 Jy
! Component: 250  -  total flux cleaned = 1.83714e-06 Jy
! Component: 300  -  total flux cleaned = -3.31541e-05 Jy
! Component: 350  -  total flux cleaned = 1.03127e-06 Jy
! Component: 400  -  total flux cleaned = 3.38006e-05 Jy
! Component: 450  -  total flux cleaned = 3.37576e-05 Jy
! Component: 500  -  total flux cleaned = 1.21673e-06 Jy
! Component: 550  -  total flux cleaned = -6.24919e-05 Jy
! Component: 600  -  total flux cleaned = -0.000186155 Jy
! Component: 650  -  total flux cleaned = -0.000247095 Jy
! Component: 700  -  total flux cleaned = -0.000307371 Jy
! Component: 750  -  total flux cleaned = -0.000336901 Jy
! Component: 800  -  total flux cleaned = -0.000423769 Jy
! Component: 850  -  total flux cleaned = -0.000395048 Jy
! Component: 900  -  total flux cleaned = -0.000507517 Jy
! Component: 950  -  total flux cleaned = -0.00042393 Jy
! Component: 1000  -  total flux cleaned = -0.000479193 Jy
! Component: 1050  -  total flux cleaned = -0.000506218 Jy
! Component: 1100  -  total flux cleaned = -0.000479486 Jy
! Component: 1150  -  total flux cleaned = -0.000584755 Jy
! Component: 1200  -  total flux cleaned = -0.000610678 Jy
! Component: 1250  -  total flux cleaned = -0.000636736 Jy
! Component: 1300  -  total flux cleaned = -0.000662027 Jy
! Component: 1350  -  total flux cleaned = -0.000687427 Jy
! Component: 1400  -  total flux cleaned = -0.000836348 Jy
! Component: 1450  -  total flux cleaned = -0.000737925 Jy
! Component: 1500  -  total flux cleaned = -0.000883651 Jy
! Component: 1550  -  total flux cleaned = -0.000979319 Jy
! Component: 1600  -  total flux cleaned = -0.00102672 Jy
! Component: 1650  -  total flux cleaned = -0.00109696 Jy
! Component: 1700  -  total flux cleaned = -0.00118965 Jy
! Component: 1750  -  total flux cleaned = -0.00118958 Jy
! Component: 1800  -  total flux cleaned = -0.00130366 Jy
! Component: 1850  -  total flux cleaned = -0.00139377 Jy
! Component: 1900  -  total flux cleaned = -0.00150521 Jy
! Component: 1950  -  total flux cleaned = -0.00161528 Jy
! Component: 2000  -  total flux cleaned = -0.0016589 Jy
! Component: 2050  -  total flux cleaned = -0.00168039 Jy
! Component: 2100  -  total flux cleaned = -0.0017661 Jy
! Component: 2150  -  total flux cleaned = -0.00170241 Jy
! Component: 2200  -  total flux cleaned = -0.00176566 Jy
! Component: 2250  -  total flux cleaned = -0.00172417 Jy
! Component: 2300  -  total flux cleaned = -0.00176542 Jy
! Component: 2350  -  total flux cleaned = -0.00174488 Jy
! Component: 2400  -  total flux cleaned = -0.00174489 Jy
! Component: 2450  -  total flux cleaned = -0.00172483 Jy
! Component: 2500  -  total flux cleaned = -0.00172503 Jy
! Component: 2550  -  total flux cleaned = -0.00180418 Jy
! Component: 2600  -  total flux cleaned = -0.00176449 Jy
! Component: 2650  -  total flux cleaned = -0.00172569 Jy
! Component: 2700  -  total flux cleaned = -0.00182226 Jy
! Component: 2750  -  total flux cleaned = -0.00166888 Jy
! Component: 2800  -  total flux cleaned = -0.00165009 Jy
! Component: 2850  -  total flux cleaned = -0.00165037 Jy
! Component: 2900  -  total flux cleaned = -0.00161328 Jy
! Component: 2950  -  total flux cleaned = -0.00165066 Jy
! Component: 3000  -  total flux cleaned = -0.00165045 Jy
! Component: 3050  -  total flux cleaned = -0.00159574 Jy
! Component: 3100  -  total flux cleaned = -0.0015955 Jy
! Component: 3150  -  total flux cleaned = -0.00155949 Jy
! Component: 3200  -  total flux cleaned = -0.00159532 Jy
! Component: 3250  -  total flux cleaned = -0.00150671 Jy
! Component: 3300  -  total flux cleaned = -0.00152447 Jy
! Component: 3350  -  total flux cleaned = -0.00154195 Jy
! Component: 3400  -  total flux cleaned = -0.0015246 Jy
! Component: 3450  -  total flux cleaned = -0.00149007 Jy
! Component: 3500  -  total flux cleaned = -0.00149016 Jy
! Component: 3550  -  total flux cleaned = -0.00150748 Jy
! Component: 3600  -  total flux cleaned = -0.00142304 Jy
! Component: 3650  -  total flux cleaned = -0.00147342 Jy
! Component: 3700  -  total flux cleaned = -0.0014901 Jy
! Component: 3750  -  total flux cleaned = -0.00144031 Jy
! Component: 3800  -  total flux cleaned = -0.00152243 Jy
! Component: 3850  -  total flux cleaned = -0.00149 Jy
! Component: 3900  -  total flux cleaned = -0.00147371 Jy
! Component: 3950  -  total flux cleaned = -0.0014414 Jy
! Component: 4000  -  total flux cleaned = -0.00148976 Jy
! Component: 4050  -  total flux cleaned = -0.00147382 Jy
! Total flux subtracted in 4096 components = -0.0014265 Jy
! Clean residual min=-0.000810 max=0.000956 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.425142 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 473 components and 0.425142 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1036-0605_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.206 x 7.728 at -2.239 degrees (North through East)
! Clean map  min=-0.0019065  max=0.25918 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1036-0605_S_map.fits
wmodel /vlbi/uf001/uva//J1036-0605_S_map.mod
! Writing 473 model components to file: /vlbi/uf001/uva//J1036-0605_S_map.mod
wobs   /vlbi/uf001/uva//J1036-0605_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1036-0605_S_uvs.fits
wwins  /vlbi/uf001/uva//J1036-0605_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J1036-0605_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.259185 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000297988 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.344914 0.344914 0.689828 1.37966 2.75931 5.51862 11.0372 22.0745 44.149 88.298
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.259 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  869.782 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1036-0605_S_dfm.log closed on Mon Jan 14 00:57:44 2019