! Started logfile: /vlbi/uf001/uva//J1035+3510_S_b_dfm.log on Mon Jan 14 00:56:43 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1035+3510_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1035+3510_S_b_uva.fits ! AN table 1: 74 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J1035+3510 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5439 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1035+3510_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003044Jy sigma=24.304160 ! Fit after self-cal, rms=0.966413Jy sigma=23.432393 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.019 mas, bpa=-18.59 degrees ! Estimated noise=0.653632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269459 Jy ! Component: 100 - total flux cleaned = 0.0331105 Jy ! Total flux subtracted in 100 components = 0.0331105 Jy ! Clean residual min=-0.003183 max=0.003389 Jy/beam ! Clean residual mean=0.000002 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0331105 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0331105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055877Jy sigma=1.227075 ! Fit after self-cal, rms=0.054110Jy sigma=1.181380 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=7.593 mas, bpa=-19.17 degrees ! Estimated noise=0.408333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386794 Jy ! Component: 100 - total flux cleaned = 0.00521012 Jy ! Component: 150 - total flux cleaned = 0.00553351 Jy ! Component: 200 - total flux cleaned = 0.00572321 Jy ! Total flux subtracted in 200 components = 0.00572321 Jy ! Clean residual min=-0.001612 max=0.001710 Jy/beam ! Clean residual mean=0.000004 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0388337 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 26 components and 0.0388337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053792Jy sigma=1.175678 ! Fit after self-cal, rms=0.053792Jy sigma=1.175483 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.691 x 7.593 at -19.17 degrees (North through East) ! Clean map min=-0.0015553 max=0.037386 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 1.06 KP 0.99 ! LA 0.96 MK 1.06 NL 0.99 OV 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.06 KP 1.00 ! LA 0.95 MK 1.03 NL 0.88 OV 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.01 KP 1.03 ! LA 1.10 MK 0.98 NL 0.98 OV 1.07 ! ! ! Fit before self-cal, rms=0.053792Jy sigma=1.175483 ! Fit after self-cal, rms=0.052854Jy sigma=1.173890 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.729 mas, bmaj=7.64 mas, bpa=-19.17 degrees ! Estimated noise=0.409023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.21603e-05 Jy ! Component: 100 - total flux cleaned = -2.86589e-05 Jy ! Component: 150 - total flux cleaned = -4.10466e-05 Jy ! Component: 200 - total flux cleaned = -5.1739e-05 Jy ! Total flux subtracted in 200 components = -5.1739e-05 Jy ! Clean residual min=-0.001616 max=0.001556 Jy/beam ! Clean residual mean=0.000007 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.038782 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.038782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.052841Jy sigma=1.173779 ! Fit after self-cal, rms=0.052853Jy sigma=1.173403 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.052853Jy sigma=1.173403 ! Fit after self-cal, rms=0.050800Jy sigma=1.169234 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=7.665 mas, bpa=-19.27 degrees ! Estimated noise=0.407088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147784 Jy ! Component: 100 - total flux cleaned = -0.000197246 Jy ! Component: 150 - total flux cleaned = -0.000236026 Jy ! Component: 200 - total flux cleaned = -0.000268153 Jy ! Total flux subtracted in 200 components = -0.000268153 Jy ! Clean residual min=-0.001388 max=0.001378 Jy/beam ! Clean residual mean=0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0385138 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.0385138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050795Jy sigma=1.169141 ! Fit after self-cal, rms=0.050770Jy sigma=1.168479 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.32532e-05 Jy ! Component: 100 - total flux cleaned = -3.97932e-06 Jy ! Component: 150 - total flux cleaned = -3.67203e-05 Jy ! Component: 200 - total flux cleaned = -5.88114e-05 Jy ! Total flux subtracted in 200 components = -5.88114e-05 Jy ! Clean residual min=-0.001366 max=0.001377 Jy/beam ! Clean residual mean=0.000002 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.038455 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.038455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050766Jy sigma=1.168408 ! Fit after self-cal, rms=0.050765Jy sigma=1.168382 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050765Jy sigma=1.168382 ! Fit after self-cal, rms=0.050545Jy sigma=1.168187 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=7.667 mas, bpa=-19.28 degrees ! Estimated noise=0.405425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216684 Jy ! Component: 100 - total flux cleaned = -0.000251533 Jy ! Component: 150 - total flux cleaned = -0.000288952 Jy ! Component: 200 - total flux cleaned = -0.000311854 Jy ! Total flux subtracted in 200 components = -0.000311854 Jy ! Clean residual min=-0.001357 max=0.001394 Jy/beam ! Clean residual mean=0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0381431 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.0381431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050540Jy sigma=1.168111 ! Fit after self-cal, rms=0.050543Jy sigma=1.168053 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.81483e-05 Jy ! Component: 100 - total flux cleaned = -1.2687e-05 Jy ! Component: 150 - total flux cleaned = -3.26802e-05 Jy ! Component: 200 - total flux cleaned = -4.46302e-05 Jy ! Total flux subtracted in 200 components = -4.46302e-05 Jy ! Clean residual min=-0.001338 max=0.001365 Jy/beam ! Clean residual mean=0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0380985 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.0380985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050540Jy sigma=1.168017 ! Fit after self-cal, rms=0.050538Jy sigma=1.167963 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050538Jy sigma=1.167963 ! Fit after self-cal, rms=0.050291Jy sigma=1.167916 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.443 mas, bmaj=9.689 mas, bpa=-13.91 degrees ! Estimated noise=0.483025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170531 Jy ! Component: 100 - total flux cleaned = -0.000168607 Jy ! Component: 150 - total flux cleaned = -0.000168176 Jy ! Component: 200 - total flux cleaned = -0.00016878 Jy ! Total flux subtracted in 200 components = -0.00016878 Jy ! Clean residual min=-0.001522 max=0.001566 Jy/beam ! Clean residual mean=0.000004 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0379297 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.0379297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050290Jy sigma=1.167931 ! Fit after self-cal, rms=0.050289Jy sigma=1.167817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.51939e-05 Jy ! Component: 100 - total flux cleaned = -6.58822e-07 Jy ! Component: 150 - total flux cleaned = -8.68987e-07 Jy ! Component: 200 - total flux cleaned = -9.04356e-07 Jy ! Total flux subtracted in 200 components = -9.04356e-07 Jy ! Clean residual min=-0.001559 max=0.001592 Jy/beam ! Clean residual mean=0.000004 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0379288 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 70 components and 0.0379288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050289Jy sigma=1.167861 ! Fit after self-cal, rms=0.050291Jy sigma=1.167818 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=7.669 mas, bpa=-19.34 degrees ! Estimated noise=0.403717 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.781 x 7.669 at -19.34 degrees (North through East) ! Clean map min=-0.0013235 max=0.037087 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=7.079 mas, bpa=-18.78 degrees ! Estimated noise=0.648655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288117 Jy ! Component: 100 - total flux cleaned = 0.0353596 Jy ! Component: 150 - total flux cleaned = 0.0364704 Jy ! Component: 200 - total flux cleaned = 0.0369426 Jy ! Total flux subtracted in 200 components = 0.0369426 Jy ! Clean residual min=-0.002539 max=0.002652 Jy/beam ! Clean residual mean=0.000000 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.0369426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0369426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=7.669 mas, bpa=-19.34 degrees ! Estimated noise=0.403717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940889 Jy ! Component: 100 - total flux cleaned = 0.00105475 Jy ! Component: 150 - total flux cleaned = 0.00107477 Jy ! Component: 200 - total flux cleaned = 0.00103762 Jy ! Total flux subtracted in 200 components = 0.00103762 Jy ! Clean residual min=-0.001466 max=0.001571 Jy/beam ! Clean residual mean=0.000002 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0379803 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.0379803 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.443 mas, bmaj=9.689 mas, bpa=-13.91 degrees ! Estimated noise=0.483025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103055 Jy ! Component: 100 - total flux cleaned = -4.92935e-05 Jy ! Component: 150 - total flux cleaned = -6.37888e-05 Jy ! Component: 200 - total flux cleaned = -5.14836e-05 Jy ! Total flux subtracted in 200 components = -5.14836e-05 Jy ! Clean residual min=-0.001639 max=0.001577 Jy/beam ! Clean residual mean=0.000004 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0379288 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12188e-05 Jy ! Component: 100 - total flux cleaned = 1.1326e-05 Jy ! Component: 150 - total flux cleaned = 2.13367e-05 Jy ! Component: 200 - total flux cleaned = 2.12992e-05 Jy ! Total flux subtracted in 200 components = 2.12992e-05 Jy ! Clean residual min=-0.001612 max=0.001578 Jy/beam ! Clean residual mean=0.000004 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0379501 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.0379501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=7.669 mas, bpa=-19.34 degrees ! Estimated noise=0.403717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.17155e-06 Jy ! Component: 100 - total flux cleaned = -2.99895e-05 Jy ! Component: 150 - total flux cleaned = -4.46435e-05 Jy ! Component: 200 - total flux cleaned = -5.7669e-05 Jy ! Total flux subtracted in 200 components = -5.7669e-05 Jy ! Clean residual min=-0.001352 max=0.001428 Jy/beam ! Clean residual mean=0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0378924 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0378924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.050291Jy sigma=1.167937 ! Fit after self-cal, rms=0.050293Jy sigma=1.167859 wmodel J1035+3510_S_b_map.mod ! Writing 47 model components to file: J1035+3510_S_b_map.mod wobs J1035+3510_S_b_uvs.fits ! Writing UV FITS file: J1035+3510_S_b_uvs.fits wwins J1035+3510_S_b_map.win ! wwins: Wrote 1 windows to J1035+3510_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295143 Jy ! Component: 100 - total flux cleaned = 0.000343246 Jy ! Component: 150 - total flux cleaned = 0.000386957 Jy ! Component: 200 - total flux cleaned = 0.000366601 Jy ! Component: 250 - total flux cleaned = 0.000406991 Jy ! Component: 300 - total flux cleaned = 0.000388048 Jy ! Component: 350 - total flux cleaned = 0.000332852 Jy ! Component: 400 - total flux cleaned = 0.000386921 Jy ! Component: 450 - total flux cleaned = 0.000421456 Jy ! Component: 500 - total flux cleaned = 0.00047247 Jy ! Component: 550 - total flux cleaned = 0.000555153 Jy ! Component: 600 - total flux cleaned = 0.000635038 Jy ! Component: 650 - total flux cleaned = 0.000666083 Jy ! Component: 700 - total flux cleaned = 0.0006968 Jy ! Component: 750 - total flux cleaned = 0.000756805 Jy ! Component: 800 - total flux cleaned = 0.000786509 Jy ! Component: 850 - total flux cleaned = 0.000815812 Jy ! Component: 900 - total flux cleaned = 0.000872617 Jy ! Component: 950 - total flux cleaned = 0.000927782 Jy ! Component: 1000 - total flux cleaned = 0.000954882 Jy ! Component: 1050 - total flux cleaned = 0.00100806 Jy ! Component: 1100 - total flux cleaned = 0.00103394 Jy ! Component: 1150 - total flux cleaned = 0.00104671 Jy ! Component: 1200 - total flux cleaned = 0.00105947 Jy ! Component: 1250 - total flux cleaned = 0.00108434 Jy ! Component: 1300 - total flux cleaned = 0.00110877 Jy ! Component: 1350 - total flux cleaned = 0.00112068 Jy ! Component: 1400 - total flux cleaned = 0.00110879 Jy ! Component: 1450 - total flux cleaned = 0.0010972 Jy ! Component: 1500 - total flux cleaned = 0.0010856 Jy ! Component: 1550 - total flux cleaned = 0.00108554 Jy ! Component: 1600 - total flux cleaned = 0.00110784 Jy ! Component: 1650 - total flux cleaned = 0.00110784 Jy ! Component: 1700 - total flux cleaned = 0.00114054 Jy ! Component: 1750 - total flux cleaned = 0.00112985 Jy ! Component: 1800 - total flux cleaned = 0.00114045 Jy ! Component: 1850 - total flux cleaned = 0.00115095 Jy ! Component: 1900 - total flux cleaned = 0.00115104 Jy ! Component: 1950 - total flux cleaned = 0.00115107 Jy ! Component: 2000 - total flux cleaned = 0.00116121 Jy ! Component: 2050 - total flux cleaned = 0.00119124 Jy ! Component: 2100 - total flux cleaned = 0.00117142 Jy ! Component: 2150 - total flux cleaned = 0.00117149 Jy ! Component: 2200 - total flux cleaned = 0.00119082 Jy ! Component: 2250 - total flux cleaned = 0.0011909 Jy ! Component: 2300 - total flux cleaned = 0.00121948 Jy ! Component: 2350 - total flux cleaned = 0.00121953 Jy ! Component: 2400 - total flux cleaned = 0.00125692 Jy ! Component: 2450 - total flux cleaned = 0.00125682 Jy ! Component: 2500 - total flux cleaned = 0.0012661 Jy ! Component: 2550 - total flux cleaned = 0.00132973 Jy ! Component: 2600 - total flux cleaned = 0.00132071 Jy ! Component: 2650 - total flux cleaned = 0.00135649 Jy ! Component: 2700 - total flux cleaned = 0.00139199 Jy ! Component: 2750 - total flux cleaned = 0.00140968 Jy ! Component: 2800 - total flux cleaned = 0.00145329 Jy ! Component: 2850 - total flux cleaned = 0.00148796 Jy ! Component: 2900 - total flux cleaned = 0.00150505 Jy ! Component: 2950 - total flux cleaned = 0.00149653 Jy ! Component: 3000 - total flux cleaned = 0.00153897 Jy ! Component: 3050 - total flux cleaned = 0.00154741 Jy ! Component: 3100 - total flux cleaned = 0.00158919 Jy ! Component: 3150 - total flux cleaned = 0.00160583 Jy ! Component: 3200 - total flux cleaned = 0.00163063 Jy ! Component: 3250 - total flux cleaned = 0.00168809 Jy ! Component: 3300 - total flux cleaned = 0.0016963 Jy ! Component: 3350 - total flux cleaned = 0.00171255 Jy ! Component: 3400 - total flux cleaned = 0.00173675 Jy ! Component: 3450 - total flux cleaned = 0.00175281 Jy ! Component: 3500 - total flux cleaned = 0.00180067 Jy ! Component: 3550 - total flux cleaned = 0.00180863 Jy ! Component: 3600 - total flux cleaned = 0.00181654 Jy ! Component: 3650 - total flux cleaned = 0.00184011 Jy ! Component: 3700 - total flux cleaned = 0.00182448 Jy ! Component: 3750 - total flux cleaned = 0.00184002 Jy ! Component: 3800 - total flux cleaned = 0.00183996 Jy ! Component: 3850 - total flux cleaned = 0.00183222 Jy ! Component: 3900 - total flux cleaned = 0.00183993 Jy ! Component: 3950 - total flux cleaned = 0.0018246 Jy ! Component: 4000 - total flux cleaned = 0.00183219 Jy ! Component: 4050 - total flux cleaned = 0.00180924 Jy ! Total flux subtracted in 4096 components = 0.00180162 Jy ! Clean residual min=-0.000474 max=0.000448 Jy/beam ! Clean residual mean=0.000000 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.039694 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 282 components and 0.039694 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1035+3510_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.781 x 7.669 at -19.34 degrees (North through East) ! Clean map min=-0.0011232 max=0.037101 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1035+3510_S_b_map.fits wmodel /vlbi/uf001/uva//J1035+3510_S_b_map.mod ! Writing 282 model components to file: /vlbi/uf001/uva//J1035+3510_S_b_map.mod wobs /vlbi/uf001/uva//J1035+3510_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1035+3510_S_b_uvs.fits wwins /vlbi/uf001/uva//J1035+3510_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1035+3510_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0371011 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000125233 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01263 1.01263 2.02526 4.05053 8.10105 16.2021 32.4042 64.8084 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.037 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 296.257 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1035+3510_S_b_dfm.log closed on Mon Jan 14 00:56:48 2019