! Started logfile: /vlbi/uf001/uvm//J1033-2536_S_a_dfm.log on Sun Jan 13 21:21:12 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J1033-2536_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1033-2536_S_a_uvm.fits ! AN table 1: 58 integrations on 15 of 15 possible baselines. ! AN table 2: 98 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.850068 visibilities/baseline/integration-bin. ! Found source: J1033-2536 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7467 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1033-2536_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 62 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003096Jy sigma=18.345886 ! Fit after self-cal, rms=0.955908Jy sigma=17.483188 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=19.4 mas, bpa=-23.24 degrees ! Estimated noise=0.868262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361995 Jy ! Component: 100 - total flux cleaned = 0.0446089 Jy ! Total flux subtracted in 100 components = 0.0446089 Jy ! Clean residual min=-0.003818 max=0.004104 Jy/beam ! Clean residual mean=-0.000002 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.0446089 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0446089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065353Jy sigma=1.149591 ! Fit after self-cal, rms=0.063892Jy sigma=1.123272 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=20.82 mas, bpa=-22.25 degrees ! Estimated noise=0.458203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483414 Jy ! Component: 100 - total flux cleaned = 0.00689358 Jy ! Component: 150 - total flux cleaned = 0.00812329 Jy ! Component: 200 - total flux cleaned = 0.00848451 Jy ! Total flux subtracted in 200 components = 0.00848451 Jy ! Clean residual min=-0.001752 max=0.001810 Jy/beam ! Clean residual mean=-0.000004 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0530934 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 41 components and 0.0530934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063583Jy sigma=1.116681 ! Fit after self-cal, rms=0.063543Jy sigma=1.116085 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 20.82 at -22.25 degrees (North through East) ! Clean map min=-0.0017848 max=0.047098 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 KP 0.94 LA 0.97 NL 1.14 ! OV 0.96 PT 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 1.01 KP 1.02 LA 0.92 ! MK 1.02 NL 1.13 OV 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 KP 0.93 LA 1.02 NL 0.93 ! OV 0.96 PT 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 0.99 KP 0.99 LA 0.93 ! MK 1.02 NL 0.98 OV 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.90 KP 0.96 LA 1.05 NL 0.86 ! OV 1.09 PT 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 0.93 KP 1.04 LA 1.03 ! MK 1.08 NL 0.91 OV 1.07 ! ! ! Fit before self-cal, rms=0.063543Jy sigma=1.116085 ! Fit after self-cal, rms=0.062992Jy sigma=1.113485 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=20.98 mas, bpa=-22.11 degrees ! Estimated noise=0.452633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031853 Jy ! Component: 100 - total flux cleaned = 0.000287859 Jy ! Component: 150 - total flux cleaned = 0.000290104 Jy ! Component: 200 - total flux cleaned = 0.000241893 Jy ! Total flux subtracted in 200 components = 0.000241893 Jy ! Clean residual min=-0.001341 max=0.001613 Jy/beam ! Clean residual mean=-0.000006 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0533353 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.0533353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062964Jy sigma=1.112910 ! Fit after self-cal, rms=0.063046Jy sigma=1.111417 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063046Jy sigma=1.111417 ! Fit after self-cal, rms=0.063151Jy sigma=1.110771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=21 mas, bpa=-22.11 degrees ! Estimated noise=0.45107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458411 Jy ! Component: 100 - total flux cleaned = 0.000489992 Jy ! Component: 150 - total flux cleaned = 0.000439544 Jy ! Component: 200 - total flux cleaned = 0.000394463 Jy ! Total flux subtracted in 200 components = 0.000394463 Jy ! Clean residual min=-0.001574 max=0.001628 Jy/beam ! Clean residual mean=-0.000008 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0537298 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.0537298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063127Jy sigma=1.110307 ! Fit after self-cal, rms=0.063171Jy sigma=1.110074 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.12242e-05 Jy ! Component: 100 - total flux cleaned = -5.78453e-05 Jy ! Component: 150 - total flux cleaned = -0.00012221 Jy ! Component: 200 - total flux cleaned = -0.000160266 Jy ! Total flux subtracted in 200 components = -0.000160266 Jy ! Clean residual min=-0.001641 max=0.001608 Jy/beam ! Clean residual mean=-0.000007 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0535695 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.0535695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063156Jy sigma=1.109776 ! Fit after self-cal, rms=0.063141Jy sigma=1.109578 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063141Jy sigma=1.109578 ! Fit after self-cal, rms=0.062949Jy sigma=1.108739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=21 mas, bpa=-22.13 degrees ! Estimated noise=0.447965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460562 Jy ! Component: 100 - total flux cleaned = 0.000459391 Jy ! Component: 150 - total flux cleaned = 0.00043841 Jy ! Component: 200 - total flux cleaned = 0.000421674 Jy ! Total flux subtracted in 200 components = 0.000421674 Jy ! Clean residual min=-0.001572 max=0.001624 Jy/beam ! Clean residual mean=-0.000008 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0539912 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.0539912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062934Jy sigma=1.108450 ! Fit after self-cal, rms=0.062990Jy sigma=1.108207 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05682e-05 Jy ! Component: 100 - total flux cleaned = -4.58434e-05 Jy ! Component: 150 - total flux cleaned = -7.93392e-05 Jy ! Component: 200 - total flux cleaned = -0.000109978 Jy ! Total flux subtracted in 200 components = -0.000109978 Jy ! Clean residual min=-0.001623 max=0.001640 Jy/beam ! Clean residual mean=-0.000008 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0538812 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.0538812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062980Jy sigma=1.108024 ! Fit after self-cal, rms=0.062977Jy sigma=1.107905 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062977Jy sigma=1.107905 ! Fit after self-cal, rms=0.062863Jy sigma=1.107819 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.366 mas, bmaj=30.87 mas, bpa=-12.32 degrees ! Estimated noise=0.525289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234545 Jy ! Component: 100 - total flux cleaned = 0.000250058 Jy ! Component: 150 - total flux cleaned = 0.000228072 Jy ! Component: 200 - total flux cleaned = 0.000237794 Jy ! Total flux subtracted in 200 components = 0.000237794 Jy ! Clean residual min=-0.001605 max=0.001751 Jy/beam ! Clean residual mean=-0.000013 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.054119 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.054119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062859Jy sigma=1.107772 ! Fit after self-cal, rms=0.062878Jy sigma=1.107723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.18774e-05 Jy ! Component: 100 - total flux cleaned = -5.58303e-05 Jy ! Component: 150 - total flux cleaned = -9.42587e-05 Jy ! Component: 200 - total flux cleaned = -9.41482e-05 Jy ! Total flux subtracted in 200 components = -9.41482e-05 Jy ! Clean residual min=-0.001638 max=0.001770 Jy/beam ! Clean residual mean=-0.000013 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0540248 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.0540248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062875Jy sigma=1.107708 ! Fit after self-cal, rms=0.062877Jy sigma=1.107690 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=21 mas, bpa=-22.12 degrees ! Estimated noise=0.446157 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.561 x 21 at -22.12 degrees (North through East) ! Clean map min=-0.0023974 max=0.046555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=19.56 mas, bpa=-23.18 degrees ! Estimated noise=0.848395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363282 Jy ! Component: 100 - total flux cleaned = 0.0453328 Jy ! Component: 150 - total flux cleaned = 0.0494473 Jy ! Component: 200 - total flux cleaned = 0.0510815 Jy ! Total flux subtracted in 200 components = 0.0510815 Jy ! Clean residual min=-0.004183 max=0.003516 Jy/beam ! Clean residual mean=-0.000009 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.0510815 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0510815 Jy ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=21 mas, bpa=-22.12 degrees ! Estimated noise=0.446157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279677 Jy ! Component: 100 - total flux cleaned = 0.00417354 Jy ! Component: 150 - total flux cleaned = 0.00426899 Jy ! Component: 200 - total flux cleaned = 0.00419065 Jy ! Total flux subtracted in 200 components = 0.00419065 Jy ! Clean residual min=-0.001835 max=0.001686 Jy/beam ! Clean residual mean=-0.000007 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0552721 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.0552721 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.366 mas, bmaj=30.87 mas, bpa=-12.32 degrees ! Estimated noise=0.525289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308293 Jy ! Component: 100 - total flux cleaned = 0.000131045 Jy ! Component: 150 - total flux cleaned = -4.78966e-06 Jy ! Component: 200 - total flux cleaned = -0.000155907 Jy ! Total flux subtracted in 200 components = -0.000155907 Jy ! Clean residual min=-0.001743 max=0.001735 Jy/beam ! Clean residual mean=-0.000012 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0551162 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116565 Jy ! Component: 100 - total flux cleaned = -0.000203956 Jy ! Component: 150 - total flux cleaned = -0.000286024 Jy ! Component: 200 - total flux cleaned = -0.00036409 Jy ! Total flux subtracted in 200 components = -0.00036409 Jy ! Clean residual min=-0.001689 max=0.001692 Jy/beam ! Clean residual mean=-0.000013 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0547521 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.0547521 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=21 mas, bpa=-22.12 degrees ! Estimated noise=0.446157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.93784e-05 Jy ! Component: 100 - total flux cleaned = 3.14886e-05 Jy ! Component: 150 - total flux cleaned = -7.17008e-05 Jy ! Component: 200 - total flux cleaned = -0.000119845 Jy ! Total flux subtracted in 200 components = -0.000119845 Jy ! Clean residual min=-0.001696 max=0.001636 Jy/beam ! Clean residual mean=-0.000008 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0546323 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.0546323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062900Jy sigma=1.108096 ! Fit after self-cal, rms=0.062896Jy sigma=1.107981 wmodel J1033-2536_S_a_map.mod ! Writing 67 model components to file: J1033-2536_S_a_map.mod wobs J1033-2536_S_a_uvs.fits ! Writing UV FITS file: J1033-2536_S_a_uvs.fits wwins J1033-2536_S_a_map.win ! wwins: Wrote 1 windows to J1033-2536_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018141 Jy ! Component: 100 - total flux cleaned = -0.000287847 Jy ! Component: 150 - total flux cleaned = -0.000480089 Jy ! Component: 200 - total flux cleaned = -0.000569592 Jy ! Component: 250 - total flux cleaned = -0.000653313 Jy ! Component: 300 - total flux cleaned = -0.000752449 Jy ! Component: 350 - total flux cleaned = -0.000846655 Jy ! Component: 400 - total flux cleaned = -0.000847012 Jy ! Component: 450 - total flux cleaned = -0.00084732 Jy ! Component: 500 - total flux cleaned = -0.000796534 Jy ! Component: 550 - total flux cleaned = -0.00076399 Jy ! Component: 600 - total flux cleaned = -0.000732495 Jy ! Component: 650 - total flux cleaned = -0.000717105 Jy ! Component: 700 - total flux cleaned = -0.000641757 Jy ! Component: 750 - total flux cleaned = -0.00061262 Jy ! Component: 800 - total flux cleaned = -0.000583793 Jy ! Component: 850 - total flux cleaned = -0.000499393 Jy ! Component: 900 - total flux cleaned = -0.000416825 Jy ! Component: 950 - total flux cleaned = -0.000336423 Jy ! Component: 1000 - total flux cleaned = -0.000270865 Jy ! Component: 1050 - total flux cleaned = -0.000258032 Jy ! Component: 1100 - total flux cleaned = -0.000232843 Jy ! Component: 1150 - total flux cleaned = -0.000220497 Jy ! Component: 1200 - total flux cleaned = -0.000220392 Jy ! Component: 1250 - total flux cleaned = -0.000232398 Jy ! Component: 1300 - total flux cleaned = -0.000255632 Jy ! Component: 1350 - total flux cleaned = -0.000290005 Jy ! Component: 1400 - total flux cleaned = -0.000323867 Jy ! Component: 1450 - total flux cleaned = -0.000334893 Jy ! Component: 1500 - total flux cleaned = -0.000334904 Jy ! Component: 1550 - total flux cleaned = -0.000356757 Jy ! Component: 1600 - total flux cleaned = -0.000378207 Jy ! Component: 1650 - total flux cleaned = -0.000399421 Jy ! Component: 1700 - total flux cleaned = -0.000409838 Jy ! Component: 1750 - total flux cleaned = -0.000420124 Jy ! Component: 1800 - total flux cleaned = -0.000440521 Jy ! Component: 1850 - total flux cleaned = -0.000470584 Jy ! Component: 1900 - total flux cleaned = -0.000519812 Jy ! Component: 1950 - total flux cleaned = -0.00053925 Jy ! Component: 2000 - total flux cleaned = -0.000586918 Jy ! Component: 2050 - total flux cleaned = -0.000586897 Jy ! Component: 2100 - total flux cleaned = -0.000605556 Jy ! Component: 2150 - total flux cleaned = -0.00060558 Jy ! Component: 2200 - total flux cleaned = -0.000596373 Jy ! Component: 2250 - total flux cleaned = -0.000596408 Jy ! Component: 2300 - total flux cleaned = -0.000596381 Jy ! Component: 2350 - total flux cleaned = -0.000587624 Jy ! Component: 2400 - total flux cleaned = -0.000579003 Jy ! Component: 2450 - total flux cleaned = -0.000596204 Jy ! Component: 2500 - total flux cleaned = -0.000579127 Jy ! Component: 2550 - total flux cleaned = -0.000587588 Jy ! Component: 2600 - total flux cleaned = -0.000570789 Jy ! Component: 2650 - total flux cleaned = -0.000529341 Jy ! Component: 2700 - total flux cleaned = -0.000521017 Jy ! Component: 2750 - total flux cleaned = -0.000504657 Jy ! Component: 2800 - total flux cleaned = -0.000488512 Jy ! Component: 2850 - total flux cleaned = -0.000480549 Jy ! Component: 2900 - total flux cleaned = -0.000480537 Jy ! Component: 2950 - total flux cleaned = -0.000464763 Jy ! Component: 3000 - total flux cleaned = -0.000464736 Jy ! Component: 3050 - total flux cleaned = -0.00044922 Jy ! Component: 3100 - total flux cleaned = -0.000441409 Jy ! Component: 3150 - total flux cleaned = -0.000464378 Jy ! Component: 3200 - total flux cleaned = -0.000449147 Jy ! Component: 3250 - total flux cleaned = -0.000449186 Jy ! Component: 3300 - total flux cleaned = -0.000464232 Jy ! Component: 3350 - total flux cleaned = -0.000441887 Jy ! Component: 3400 - total flux cleaned = -0.00047902 Jy ! Component: 3450 - total flux cleaned = -0.000501158 Jy ! Component: 3500 - total flux cleaned = -0.000545011 Jy ! Component: 3550 - total flux cleaned = -0.000559462 Jy ! Component: 3600 - total flux cleaned = -0.000545015 Jy ! Component: 3650 - total flux cleaned = -0.000588168 Jy ! Component: 3700 - total flux cleaned = -0.000631039 Jy ! Component: 3750 - total flux cleaned = -0.000638134 Jy ! Component: 3800 - total flux cleaned = -0.000673476 Jy ! Component: 3850 - total flux cleaned = -0.000687512 Jy ! Component: 3900 - total flux cleaned = -0.000722443 Jy ! Component: 3950 - total flux cleaned = -0.000750282 Jy ! Component: 4000 - total flux cleaned = -0.000784781 Jy ! Component: 4050 - total flux cleaned = -0.000812212 Jy ! Total flux subtracted in 4096 components = -0.000825919 Jy ! Clean residual min=-0.000412 max=0.000397 Jy/beam ! Clean residual mean=-0.000004 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.0538064 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 347 components and 0.0538064 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1033-2536_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.561 x 21 at -22.12 degrees (North through East) ! Clean map min=-0.0012331 max=0.044616 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1033-2536_S_a_map.fits wmodel /vlbi/uf001/uvm//J1033-2536_S_a_map.mod ! Writing 347 model components to file: /vlbi/uf001/uvm//J1033-2536_S_a_map.mod wobs /vlbi/uf001/uvm//J1033-2536_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1033-2536_S_a_uvs.fits wwins /vlbi/uf001/uvm//J1033-2536_S_a_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J1033-2536_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0446156 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130468 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.877282 0.877282 1.75456 3.50913 7.01826 14.0365 28.073 56.1461 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.044 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 341.965 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1033-2536_S_a_dfm.log closed on Sun Jan 13 21:21:16 2019