! Started logfile: /vlbi/uf001/uvm//J1026+0131_X_a_dfm.log on Sun Jan 13 21:20:35 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uvm//J1026+0131_X_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J1026+0131_X_a_uvm.fits
! AN table 1: 110 integrations on 36 of 36 possible baselines.
! AN table 2: 72 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.951807 visibilities/baseline/integration-bin.
! Found source: J1026+0131
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 68256 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1026+0131_X_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002199Jy  sigma=22.481901
! Fit after  self-cal, rms=0.971272Jy  sigma=21.808239
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6796 mas, bmaj=1.671 mas, bpa=-8.006 degrees
! Estimated noise=0.274145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023836 Jy
! Component: 100  -  total flux cleaned = 0.0290407 Jy
! Total flux subtracted in 100 components = 0.0290407 Jy
! Clean residual min=-0.001808 max=0.001950 Jy/beam
! Clean residual mean=0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0290407 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0290407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057820Jy  sigma=1.203083
! Fit after  self-cal, rms=0.056018Jy  sigma=1.160836
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00379899 Jy
! Component: 100  -  total flux cleaned = 0.0038318 Jy
! Total flux subtracted in 100 components = 0.0038318 Jy
! Clean residual min=-0.001673 max=0.001724 Jy/beam
! Clean residual mean=-0.000000 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0328724 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0328724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055797Jy  sigma=1.157055
! Fit after  self-cal, rms=0.055784Jy  sigma=1.156788
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8901 mas, bmaj=2.049 mas, bpa=-7.585 degrees
! Estimated noise=0.12323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114671 Jy
! Component: 100  -  total flux cleaned = 0.0011534 Jy
! Component: 150  -  total flux cleaned = 0.00122589 Jy
! Component: 200  -  total flux cleaned = 0.00126969 Jy
! Total flux subtracted in 200 components = 0.00126969 Jy
! Clean residual min=-0.001053 max=0.001354 Jy/beam
! Clean residual mean=-0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0341421 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.0341421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055747Jy  sigma=1.155767
! Fit after  self-cal, rms=0.055712Jy  sigma=1.155425
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8901 x 2.049 at -7.585 degrees (North through East)
! Clean map  min=-0.00098852  max=0.033511 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     HN        1.01     KP        0.95     LA        1.04     
!   MK        1.13     NL        1.20     OV        0.88     PT        1.03     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.01     HN        0.94     KP        0.95     
!   LA        1.06     MK        1.06     NL        1.17     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        1.01     KP        0.99     LA        1.03     
!   MK        1.03     NL        1.18     OV        0.89     PT        1.07     
!   SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        0.98     HN        0.94     KP        0.93     
!   LA        1.07     MK        1.00     NL        1.18     PT        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     HN        0.96     KP        1.02     LA        1.00     
!   MK        1.09     NL        1.21     OV        0.89     PT        1.08     
!   SC        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     FD        1.03     HN        0.86     KP        0.98     
!   LA        0.97     MK        1.03     NL        1.20     PT        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.90     KP        1.04     LA        1.02     
!   MK        1.09     NL        1.18     OV        0.94     PT        1.04     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     FD        1.06     HN        0.82     KP        0.99     
!   LA        0.99     MK        1.05     NL        1.14     PT        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.01     KP        1.05     LA        1.05     
!   MK        0.98     NL        1.22     OV        0.95     PT        1.01     
!   SC        0.88     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.05     HN        0.77     KP        1.15     
!   LA        0.99     MK        1.06     NL        1.09     PT        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        0.94     KP        1.10     LA        1.04     
!   MK        1.14     NL        1.14     OV        0.84     PT        1.04     
!   SC        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     FD        0.99     HN        0.89     KP        1.14     
!   LA        0.97     MK        1.01     NL        1.10     PT        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.91     KP        0.97     LA        1.07     
!   MK        1.07     NL        1.20     OV        0.94     PT        0.99     
!   SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.00     HN        0.74     KP        1.09     
!   LA        1.07     MK        1.00     NL        1.19     PT        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        0.94     KP        1.04     LA        1.00     
!   MK        1.10     NL        1.15     OV        0.86     PT        0.98     
!   SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.89     HN        0.71     KP        1.12     
!   LA        1.03     MK        1.02     NL        1.23     PT        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        0.95     KP        1.02     LA        1.02     
!   MK        0.99     NL        1.22     OV        0.83     PT        1.00     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        0.92     HN        0.77     KP        1.13     
!   LA        1.04     MK        1.01     NL        1.08     PT        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.93     KP        1.05     LA        1.03     
!   MK        0.99     NL        1.15     OV        0.95     PT        0.97     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.78     FD        0.93     HN        0.78     KP        1.07     
!   LA        1.05     MK        1.10     NL        1.13     PT        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.85     KP        0.87     LA        0.97     
!   MK        0.97     NL        1.14     OV        0.94     PT        0.97     
!   SC        0.85     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.89     FD        0.92     HN        0.81     KP        1.03     
!   LA        0.95     MK        0.94     NL        1.06     PT        0.90     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        0.89     KP        0.98     LA        1.07     
!   MK        0.85     NL        1.12     OV        0.90     PT        0.89     
!   SC        0.86     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.80     FD        0.92     HN        0.78     KP        0.95     
!   LA        1.01     MK        0.76     NL        1.12     PT        0.89     
! 
! 
! Fit before self-cal, rms=0.055712Jy  sigma=1.155425
! Fit after  self-cal, rms=0.053245Jy  sigma=1.150796
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8814 mas, bmaj=2.022 mas, bpa=-6.646 degrees
! Estimated noise=0.122277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117912 Jy
! Component: 100  -  total flux cleaned = 0.000168217 Jy
! Component: 150  -  total flux cleaned = 0.00019601 Jy
! Component: 200  -  total flux cleaned = 0.000235293 Jy
! Total flux subtracted in 200 components = 0.000235293 Jy
! Clean residual min=-0.000564 max=0.000590 Jy/beam
! Clean residual mean=-0.000000 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0343774 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 43 components and 0.0343774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053239Jy  sigma=1.150678
! Fit after  self-cal, rms=0.053256Jy  sigma=1.149171
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053256Jy  sigma=1.149171
! Fit after  self-cal, rms=0.053366Jy  sigma=1.147768
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8794 mas, bmaj=2.013 mas, bpa=-6.379 degrees
! Estimated noise=0.122285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121113 Jy
! Component: 100  -  total flux cleaned = 0.000107142 Jy
! Component: 150  -  total flux cleaned = 0.000101197 Jy
! Component: 200  -  total flux cleaned = 0.000101178 Jy
! Total flux subtracted in 200 components = 0.000101178 Jy
! Clean residual min=-0.000501 max=0.000508 Jy/beam
! Clean residual mean=-0.000000 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0344786 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 0.0344786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053365Jy  sigma=1.147732
! Fit after  self-cal, rms=0.053407Jy  sigma=1.147229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.45549e-05 Jy
! Component: 100  -  total flux cleaned = -2.21374e-05 Jy
! Component: 150  -  total flux cleaned = -6.40456e-05 Jy
! Component: 200  -  total flux cleaned = -8.2563e-05 Jy
! Total flux subtracted in 200 components = -8.2563e-05 Jy
! Clean residual min=-0.000508 max=0.000535 Jy/beam
! Clean residual mean=-0.000000 rms=0.000130 Jy/beam
! Combined flux in latest and established models = 0.034396 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.0343961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053405Jy  sigma=1.147206
! Fit after  self-cal, rms=0.053404Jy  sigma=1.147148
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053404Jy  sigma=1.147148
! Fit after  self-cal, rms=0.053652Jy  sigma=1.146627
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8785 mas, bmaj=2.009 mas, bpa=-6.293 degrees
! Estimated noise=0.121993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.69251e-05 Jy
! Component: 100  -  total flux cleaned = -4.68798e-05 Jy
! Component: 150  -  total flux cleaned = -5.10775e-05 Jy
! Component: 200  -  total flux cleaned = -5.92146e-05 Jy
! Total flux subtracted in 200 components = -5.92146e-05 Jy
! Clean residual min=-0.000483 max=0.000516 Jy/beam
! Clean residual mean=-0.000000 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0343368 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.0343368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053651Jy  sigma=1.146606
! Fit after  self-cal, rms=0.053685Jy  sigma=1.146374
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.06649e-05 Jy
! Component: 100  -  total flux cleaned = -5.98728e-05 Jy
! Component: 150  -  total flux cleaned = -7.69443e-05 Jy
! Component: 200  -  total flux cleaned = -8.48501e-05 Jy
! Total flux subtracted in 200 components = -8.48501e-05 Jy
! Clean residual min=-0.000475 max=0.000502 Jy/beam
! Clean residual mean=-0.000000 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.034252 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 76 components and 0.034252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053684Jy  sigma=1.146359
! Fit after  self-cal, rms=0.053686Jy  sigma=1.146330
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053686Jy  sigma=1.146330
! Fit after  self-cal, rms=0.053838Jy  sigma=1.146276
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.054 mas, bmaj=3.227 mas, bpa=-8.029 degrees
! Estimated noise=0.158943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.75227e-05 Jy
! Component: 100  -  total flux cleaned = -4.45545e-05 Jy
! Component: 150  -  total flux cleaned = -2.91151e-05 Jy
! Component: 200  -  total flux cleaned = -1.59018e-05 Jy
! Total flux subtracted in 200 components = -1.59018e-05 Jy
! Clean residual min=-0.000682 max=0.000695 Jy/beam
! Clean residual mean=-0.000000 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.0342361 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 90 components and 0.0342361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053838Jy  sigma=1.146287
! Fit after  self-cal, rms=0.053855Jy  sigma=1.146253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.29468e-05 Jy
! Component: 100  -  total flux cleaned = -3.94805e-05 Jy
! Component: 150  -  total flux cleaned = -3.3402e-05 Jy
! Component: 200  -  total flux cleaned = -2.53819e-05 Jy
! Total flux subtracted in 200 components = -2.53819e-05 Jy
! Clean residual min=-0.000660 max=0.000702 Jy/beam
! Clean residual mean=-0.000000 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0342107 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.0342107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053856Jy  sigma=1.146259
! Fit after  self-cal, rms=0.053857Jy  sigma=1.146252
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8776 mas, bmaj=2.007 mas, bpa=-6.265 degrees
! Estimated noise=0.121891 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8776 x 2.007 at -6.265 degrees (North through East)
! Clean map  min=-0.00058245  max=0.033119 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6732 mas, bmaj=1.651 mas, bpa=-6.865 degrees
! Estimated noise=0.263084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.025565 Jy
! Component: 100  -  total flux cleaned = 0.0311565 Jy
! Component: 150  -  total flux cleaned = 0.0325933 Jy
! Component: 200  -  total flux cleaned = 0.0329485 Jy
! Total flux subtracted in 200 components = 0.0329485 Jy
! Clean residual min=-0.001387 max=0.001330 Jy/beam
! Clean residual mean=-0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0329485 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0329485 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8776 mas, bmaj=2.007 mas, bpa=-6.265 degrees
! Estimated noise=0.121891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000812014 Jy
! Component: 100  -  total flux cleaned = 0.000969257 Jy
! Component: 150  -  total flux cleaned = 0.00103654 Jy
! Component: 200  -  total flux cleaned = 0.00107918 Jy
! Total flux subtracted in 200 components = 0.00107918 Jy
! Clean residual min=-0.000570 max=0.000497 Jy/beam
! Clean residual mean=-0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0340277 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.0340277 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.054 mas, bmaj=3.227 mas, bpa=-8.029 degrees
! Estimated noise=0.158943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.00816e-05 Jy
! Component: 100  -  total flux cleaned = 7.91525e-05 Jy
! Component: 150  -  total flux cleaned = 0.000130949 Jy
! Component: 200  -  total flux cleaned = 0.00015468 Jy
! Total flux subtracted in 200 components = 0.00015468 Jy
! Clean residual min=-0.000648 max=0.000705 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0341824 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.58858e-05 Jy
! Component: 100  -  total flux cleaned = 2.55292e-05 Jy
! Component: 150  -  total flux cleaned = 3.01477e-05 Jy
! Component: 200  -  total flux cleaned = 3.88107e-05 Jy
! Total flux subtracted in 200 components = 3.88107e-05 Jy
! Clean residual min=-0.000646 max=0.000705 Jy/beam
! Clean residual mean=-0.000000 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0342212 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 46 components and 0.0342212 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8776 mas, bmaj=2.007 mas, bpa=-6.265 degrees
! Estimated noise=0.121891 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.02164e-06 Jy
! Component: 100  -  total flux cleaned = 6.99712e-06 Jy
! Component: 150  -  total flux cleaned = -9.89309e-07 Jy
! Component: 200  -  total flux cleaned = -2.50566e-05 Jy
! Total flux subtracted in 200 components = -2.50566e-05 Jy
! Clean residual min=-0.000512 max=0.000507 Jy/beam
! Clean residual mean=-0.000000 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0341961 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.0341961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053860Jy  sigma=1.146317
! Fit after  self-cal, rms=0.053859Jy  sigma=1.146288
wmodel J1026+0131_X_a_map.mod
! Writing 54 model components to file: J1026+0131_X_a_map.mod
wobs   J1026+0131_X_a_uvs.fits
! Writing UV FITS file: J1026+0131_X_a_uvs.fits
wwins  J1026+0131_X_a_map.win
! wwins: Wrote 2 windows to J1026+0131_X_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.43837e-05 Jy
! Component: 100  -  total flux cleaned = -0.000119857 Jy
! Component: 150  -  total flux cleaned = -0.000102605 Jy
! Component: 200  -  total flux cleaned = -0.00011061 Jy
! Component: 250  -  total flux cleaned = -8.63129e-05 Jy
! Component: 300  -  total flux cleaned = -8.65143e-05 Jy
! Component: 350  -  total flux cleaned = -7.10829e-05 Jy
! Component: 400  -  total flux cleaned = -7.10839e-05 Jy
! Component: 450  -  total flux cleaned = -7.84804e-05 Jy
! Component: 500  -  total flux cleaned = -7.84987e-05 Jy
! Component: 550  -  total flux cleaned = -7.85463e-05 Jy
! Component: 600  -  total flux cleaned = -8.55105e-05 Jy
! Component: 650  -  total flux cleaned = -5.04164e-05 Jy
! Component: 700  -  total flux cleaned = -5.05308e-05 Jy
! Component: 750  -  total flux cleaned = -5.73067e-05 Jy
! Component: 800  -  total flux cleaned = -4.373e-05 Jy
! Component: 850  -  total flux cleaned = -5.04912e-05 Jy
! Component: 900  -  total flux cleaned = -2.41454e-05 Jy
! Component: 950  -  total flux cleaned = -3.077e-05 Jy
! Component: 1000  -  total flux cleaned = -2.43014e-05 Jy
! Component: 1050  -  total flux cleaned = -1.14464e-05 Jy
! Component: 1100  -  total flux cleaned = -1.77452e-05 Jy
! Component: 1150  -  total flux cleaned = -1.14439e-05 Jy
! Component: 1200  -  total flux cleaned = -1.76901e-05 Jy
! Component: 1250  -  total flux cleaned = 6.969e-06 Jy
! Component: 1300  -  total flux cleaned = -1.14789e-05 Jy
! Component: 1350  -  total flux cleaned = -1.15153e-05 Jy
! Component: 1400  -  total flux cleaned = 4.55947e-07 Jy
! Component: 1450  -  total flux cleaned = -1.75086e-05 Jy
! Component: 1500  -  total flux cleaned = 6.18255e-06 Jy
! Component: 1550  -  total flux cleaned = -5.59687e-06 Jy
! Component: 1600  -  total flux cleaned = -5.58302e-06 Jy
! Component: 1650  -  total flux cleaned = 1.75886e-05 Jy
! Component: 1700  -  total flux cleaned = 1.758e-05 Jy
! Component: 1750  -  total flux cleaned = 1.18122e-05 Jy
! Component: 1800  -  total flux cleaned = 1.75135e-05 Jy
! Component: 1850  -  total flux cleaned = 7.36191e-05 Jy
! Component: 1900  -  total flux cleaned = 5.68413e-05 Jy
! Component: 1950  -  total flux cleaned = 6.23569e-05 Jy
! Component: 2000  -  total flux cleaned = 9.54038e-05 Jy
! Component: 2050  -  total flux cleaned = 0.000100874 Jy
! Component: 2100  -  total flux cleaned = 0.000111749 Jy
! Component: 2150  -  total flux cleaned = 9.55309e-05 Jy
! Component: 2200  -  total flux cleaned = 0.00013308 Jy
! Component: 2250  -  total flux cleaned = 0.000133055 Jy
! Component: 2300  -  total flux cleaned = 0.000127729 Jy
! Component: 2350  -  total flux cleaned = 0.000133055 Jy
! Component: 2400  -  total flux cleaned = 0.000159233 Jy
! Component: 2450  -  total flux cleaned = 0.000154042 Jy
! Component: 2500  -  total flux cleaned = 0.000164414 Jy
! Component: 2550  -  total flux cleaned = 0.000159262 Jy
! Component: 2600  -  total flux cleaned = 0.00014903 Jy
! Component: 2650  -  total flux cleaned = 0.000164289 Jy
! Component: 2700  -  total flux cleaned = 0.00015926 Jy
! Component: 2750  -  total flux cleaned = 0.000179391 Jy
! Component: 2800  -  total flux cleaned = 0.000189367 Jy
! Component: 2850  -  total flux cleaned = 0.000159494 Jy
! Component: 2900  -  total flux cleaned = 0.00017436 Jy
! Component: 2950  -  total flux cleaned = 0.000179328 Jy
! Component: 3000  -  total flux cleaned = 0.000194014 Jy
! Component: 3050  -  total flux cleaned = 0.000194022 Jy
! Component: 3100  -  total flux cleaned = 0.000198891 Jy
! Component: 3150  -  total flux cleaned = 0.00022299 Jy
! Component: 3200  -  total flux cleaned = 0.000213369 Jy
! Component: 3250  -  total flux cleaned = 0.000227708 Jy
! Component: 3300  -  total flux cleaned = 0.000218204 Jy
! Component: 3350  -  total flux cleaned = 0.000227634 Jy
! Component: 3400  -  total flux cleaned = 0.000241783 Jy
! Component: 3450  -  total flux cleaned = 0.000251135 Jy
! Component: 3500  -  total flux cleaned = 0.000269734 Jy
! Component: 3550  -  total flux cleaned = 0.000269749 Jy
! Component: 3600  -  total flux cleaned = 0.000274354 Jy
! Component: 3650  -  total flux cleaned = 0.000278965 Jy
! Component: 3700  -  total flux cleaned = 0.000288079 Jy
! Component: 3750  -  total flux cleaned = 0.000288069 Jy
! Component: 3800  -  total flux cleaned = 0.000274527 Jy
! Component: 3850  -  total flux cleaned = 0.000296997 Jy
! Component: 3900  -  total flux cleaned = 0.000305953 Jy
! Component: 3950  -  total flux cleaned = 0.000305909 Jy
! Component: 4000  -  total flux cleaned = 0.000319188 Jy
! Component: 4050  -  total flux cleaned = 0.000305923 Jy
! Total flux subtracted in 4096 components = 0.000319068 Jy
! Clean residual min=-0.000267 max=0.000288 Jy/beam
! Clean residual mean=-0.000000 rms=0.000077 Jy/beam
! Combined flux in latest and established models = 0.0345152 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 365 components and 0.0345152 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J1026+0131_X_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8776 x 2.007 at -6.265 degrees (North through East)
! Clean map  min=-0.00054461  max=0.032879 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J1026+0131_X_a_map.fits
wmodel /vlbi/uf001/uvm//J1026+0131_X_a_map.mod
! Writing 365 model components to file: /vlbi/uf001/uvm//J1026+0131_X_a_map.mod
wobs   /vlbi/uf001/uvm//J1026+0131_X_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J1026+0131_X_a_uvs.fits
wwins  /vlbi/uf001/uvm//J1026+0131_X_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J1026+0131_X_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0328794 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.65795e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.698731 0.698731 1.39746 2.79492 5.58985 11.1797 22.3594 44.7188 89.4376
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.032 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  429.349 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J1026+0131_X_a_dfm.log closed on Sun Jan 13 21:20:42 2019