! Started logfile: /vlbi/uf001/uva//J1022-0443_S_dfm.log on Mon Jan 14 00:51:44 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1022-0443_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1022-0443_S_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.996101 visibilities/baseline/integration-bin. ! Found source: J1022-0443 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7665 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1022-0443_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.003121Jy sigma=20.335478 ! Fit after self-cal, rms=0.929276Jy sigma=18.853882 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=6.759 mas, bpa=-3.168 degrees ! Estimated noise=0.553753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554674 Jy ! Component: 100 - total flux cleaned = 0.0681341 Jy ! Total flux subtracted in 100 components = 0.0681341 Jy ! Clean residual min=-0.003967 max=0.004690 Jy/beam ! Clean residual mean=-0.000000 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.0681341 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0681341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077420Jy sigma=1.343197 ! Fit after self-cal, rms=0.076935Jy sigma=1.330986 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=7.873 mas, bpa=-3.595 degrees ! Estimated noise=0.412396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689889 Jy ! Component: 100 - total flux cleaned = 0.0100127 Jy ! Component: 150 - total flux cleaned = 0.0115938 Jy ! Component: 200 - total flux cleaned = 0.0124598 Jy ! Total flux subtracted in 200 components = 0.0124598 Jy ! Clean residual min=-0.003458 max=0.002989 Jy/beam ! Clean residual mean=0.000001 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0805939 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.0805938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076336Jy sigma=1.317387 ! Fit after self-cal, rms=0.076330Jy sigma=1.317148 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.243 x 7.873 at -3.595 degrees (North through East) ! Clean map min=-0.0033325 max=0.073562 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.91 HN 1.01 KP 1.07 ! LA 0.95 MK 1.06 NL 1.03 OV 0.90 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.95 HN 1.01 KP 1.00 ! LA 0.95 MK 1.05 NL 0.96 OV 0.99 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.97 HN 0.96 KP 1.07 ! LA 1.02 MK 0.94 NL 0.98 OV 0.93 ! PT 1.05 SC 0.93 ! ! ! Fit before self-cal, rms=0.076330Jy sigma=1.317148 ! Fit after self-cal, rms=0.085369Jy sigma=1.310207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.955 mas, bpa=-3.713 degrees ! Estimated noise=0.414681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199789 Jy ! Component: 100 - total flux cleaned = 0.000230123 Jy ! Component: 150 - total flux cleaned = 0.000254944 Jy ! Component: 200 - total flux cleaned = 0.000253939 Jy ! Total flux subtracted in 200 components = 0.000253939 Jy ! Clean residual min=-0.002819 max=0.002867 Jy/beam ! Clean residual mean=0.000001 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0808478 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.0808478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085312Jy sigma=1.310025 ! Fit after self-cal, rms=0.085413Jy sigma=1.309708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085413Jy sigma=1.309708 ! Fit after self-cal, rms=0.077517Jy sigma=1.298649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.965 mas, bpa=-3.711 degrees ! Estimated noise=0.414996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350126 Jy ! Component: 100 - total flux cleaned = 0.000264909 Jy ! Component: 150 - total flux cleaned = 0.000235455 Jy ! Component: 200 - total flux cleaned = 0.000208155 Jy ! Total flux subtracted in 200 components = 0.000208155 Jy ! Clean residual min=-0.002178 max=0.002582 Jy/beam ! Clean residual mean=0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0810559 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.081056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077505Jy sigma=1.298532 ! Fit after self-cal, rms=0.077557Jy sigma=1.298202 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183965 Jy ! Component: 100 - total flux cleaned = 0.001793 Jy ! Component: 150 - total flux cleaned = 0.00175431 Jy ! Component: 200 - total flux cleaned = 0.00168624 Jy ! Total flux subtracted in 200 components = 0.00168624 Jy ! Clean residual min=-0.002136 max=0.002279 Jy/beam ! Clean residual mean=0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0827422 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.0827422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077466Jy sigma=1.296608 ! Fit after self-cal, rms=0.077442Jy sigma=1.296441 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077442Jy sigma=1.296441 ! Fit after self-cal, rms=0.079152Jy sigma=1.290995 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=7.952 mas, bpa=-3.695 degrees ! Estimated noise=0.415325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559864 Jy ! Component: 100 - total flux cleaned = 0.000622252 Jy ! Component: 150 - total flux cleaned = 0.000596962 Jy ! Component: 200 - total flux cleaned = 0.000596603 Jy ! Total flux subtracted in 200 components = 0.000596603 Jy ! Clean residual min=-0.002016 max=0.001946 Jy/beam ! Clean residual mean=0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0833388 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.0833388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079120Jy sigma=1.290732 ! Fit after self-cal, rms=0.079161Jy sigma=1.290520 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139875 Jy ! Component: 100 - total flux cleaned = 0.000122362 Jy ! Component: 150 - total flux cleaned = 9.44646e-05 Jy ! Component: 200 - total flux cleaned = 5.68217e-05 Jy ! Total flux subtracted in 200 components = 5.68217e-05 Jy ! Clean residual min=-0.001972 max=0.001940 Jy/beam ! Clean residual mean=0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0833956 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.0833956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079148Jy sigma=1.290470 ! Fit after self-cal, rms=0.079145Jy sigma=1.290462 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079145Jy sigma=1.290462 ! Fit after self-cal, rms=0.079351Jy sigma=1.290383 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.289 mas, bmaj=13.08 mas, bpa=-3.073 degrees ! Estimated noise=0.534887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270323 Jy ! Component: 100 - total flux cleaned = 0.000336583 Jy ! Component: 150 - total flux cleaned = 0.000324242 Jy ! Component: 200 - total flux cleaned = 0.000302126 Jy ! Total flux subtracted in 200 components = 0.000302126 Jy ! Clean residual min=-0.002735 max=0.002422 Jy/beam ! Clean residual mean=0.000003 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0836978 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.0836977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079347Jy sigma=1.290378 ! Fit after self-cal, rms=0.079346Jy sigma=1.290367 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43747e-05 Jy ! Component: 100 - total flux cleaned = -7.61824e-05 Jy ! Component: 150 - total flux cleaned = -8.50848e-05 Jy ! Component: 200 - total flux cleaned = -0.000101522 Jy ! Total flux subtracted in 200 components = -0.000101522 Jy ! Clean residual min=-0.002725 max=0.002428 Jy/beam ! Clean residual mean=0.000003 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0835962 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.0835962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079346Jy sigma=1.290386 ! Fit after self-cal, rms=0.079345Jy sigma=1.290380 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.952 mas, bpa=-3.784 degrees ! Estimated noise=0.415713 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 7.952 at -3.784 degrees (North through East) ! Clean map min=-0.0019522 max=0.074412 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=6.825 mas, bpa=-3.473 degrees ! Estimated noise=0.556759 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.056002 Jy ! Component: 100 - total flux cleaned = 0.0689453 Jy ! Component: 150 - total flux cleaned = 0.0745078 Jy ! Component: 200 - total flux cleaned = 0.0778467 Jy ! Total flux subtracted in 200 components = 0.0778467 Jy ! Clean residual min=-0.002668 max=0.002910 Jy/beam ! Clean residual mean=-0.000001 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0778467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0778467 Jy ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.952 mas, bpa=-3.784 degrees ! Estimated noise=0.415713 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312171 Jy ! Component: 100 - total flux cleaned = 0.00433294 Jy ! Component: 150 - total flux cleaned = 0.0045119 Jy ! Component: 200 - total flux cleaned = 0.00471884 Jy ! Total flux subtracted in 200 components = 0.00471884 Jy ! Clean residual min=-0.002272 max=0.001989 Jy/beam ! Clean residual mean=0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0825655 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.0825655 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.289 mas, bmaj=13.08 mas, bpa=-3.073 degrees ! Estimated noise=0.534887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102725 Jy ! Component: 100 - total flux cleaned = 0.00125551 Jy ! Component: 150 - total flux cleaned = 0.00136575 Jy ! Component: 200 - total flux cleaned = 0.00132218 Jy ! Total flux subtracted in 200 components = 0.00132218 Jy ! Clean residual min=-0.002775 max=0.002425 Jy/beam ! Clean residual mean=0.000003 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0838877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72031e-05 Jy ! Component: 100 - total flux cleaned = -3.32376e-05 Jy ! Component: 150 - total flux cleaned = -7.57295e-05 Jy ! Component: 200 - total flux cleaned = -0.000101131 Jy ! Total flux subtracted in 200 components = -0.000101131 Jy ! Clean residual min=-0.002751 max=0.002405 Jy/beam ! Clean residual mean=0.000003 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0837866 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 0.0837866 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.952 mas, bpa=-3.784 degrees ! Estimated noise=0.415713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031743 Jy ! Component: 100 - total flux cleaned = -0.000258855 Jy ! Component: 150 - total flux cleaned = -0.000233429 Jy ! Component: 200 - total flux cleaned = -0.000187873 Jy ! Total flux subtracted in 200 components = -0.000187873 Jy ! Clean residual min=-0.002063 max=0.001877 Jy/beam ! Clean residual mean=0.000002 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0835987 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.0835987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079370Jy sigma=1.290487 ! Fit after self-cal, rms=0.079369Jy sigma=1.290455 wmodel J1022-0443_S_map.mod ! Writing 94 model components to file: J1022-0443_S_map.mod wobs J1022-0443_S_uvs.fits ! Writing UV FITS file: J1022-0443_S_uvs.fits wwins J1022-0443_S_map.win ! wwins: Wrote 2 windows to J1022-0443_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.87563e-05 Jy ! Component: 100 - total flux cleaned = 0.000153713 Jy ! Component: 150 - total flux cleaned = 0.000408826 Jy ! Component: 200 - total flux cleaned = 0.000591136 Jy ! Component: 250 - total flux cleaned = 0.000856766 Jy ! Component: 300 - total flux cleaned = 0.00117245 Jy ! Component: 350 - total flux cleaned = 0.00147934 Jy ! Component: 400 - total flux cleaned = 0.0017513 Jy ! Component: 450 - total flux cleaned = 0.0019904 Jy ! Component: 500 - total flux cleaned = 0.0021203 Jy ! Component: 550 - total flux cleaned = 0.00229909 Jy ! Component: 600 - total flux cleaned = 0.00242429 Jy ! Component: 650 - total flux cleaned = 0.00252202 Jy ! Component: 700 - total flux cleaned = 0.00261808 Jy ! Component: 750 - total flux cleaned = 0.00271247 Jy ! Component: 800 - total flux cleaned = 0.00275834 Jy ! Component: 850 - total flux cleaned = 0.00280376 Jy ! Component: 900 - total flux cleaned = 0.00282627 Jy ! Component: 950 - total flux cleaned = 0.00287059 Jy ! Component: 1000 - total flux cleaned = 0.00289263 Jy ! Component: 1050 - total flux cleaned = 0.00293587 Jy ! Component: 1100 - total flux cleaned = 0.00297772 Jy ! Component: 1150 - total flux cleaned = 0.00291478 Jy ! Component: 1200 - total flux cleaned = 0.00289385 Jy ! Component: 1250 - total flux cleaned = 0.0028736 Jy ! Component: 1300 - total flux cleaned = 0.0027527 Jy ! Component: 1350 - total flux cleaned = 0.00269287 Jy ! Component: 1400 - total flux cleaned = 0.00255481 Jy ! Component: 1450 - total flux cleaned = 0.00245718 Jy ! Component: 1500 - total flux cleaned = 0.00232214 Jy ! Component: 1550 - total flux cleaned = 0.00220764 Jy ! Component: 1600 - total flux cleaned = 0.00207562 Jy ! Component: 1650 - total flux cleaned = 0.00201977 Jy ! Component: 1700 - total flux cleaned = 0.00190844 Jy ! Component: 1750 - total flux cleaned = 0.00178 Jy ! Component: 1800 - total flux cleaned = 0.00167081 Jy ! Component: 1850 - total flux cleaned = 0.00158093 Jy ! Component: 1900 - total flux cleaned = 0.00142035 Jy ! Component: 1950 - total flux cleaned = 0.0013673 Jy ! Component: 2000 - total flux cleaned = 0.0012272 Jy ! Component: 2050 - total flux cleaned = 0.00103636 Jy ! Component: 2100 - total flux cleaned = 0.00096766 Jy ! Component: 2150 - total flux cleaned = 0.000865398 Jy ! Component: 2200 - total flux cleaned = 0.000763567 Jy ! Component: 2250 - total flux cleaned = 0.000612438 Jy ! Component: 2300 - total flux cleaned = 0.000545805 Jy ! Component: 2350 - total flux cleaned = 0.000479954 Jy ! Component: 2400 - total flux cleaned = 0.000365391 Jy ! Component: 2450 - total flux cleaned = 0.000316649 Jy ! Component: 2500 - total flux cleaned = 0.000220167 Jy ! Component: 2550 - total flux cleaned = 0.000188061 Jy ! Component: 2600 - total flux cleaned = 4.50431e-05 Jy ! Component: 2650 - total flux cleaned = 2.92334e-05 Jy ! Component: 2700 - total flux cleaned = -3.35144e-05 Jy ! Component: 2750 - total flux cleaned = -0.000111298 Jy ! Component: 2800 - total flux cleaned = -0.000173009 Jy ! Component: 2850 - total flux cleaned = -0.000295621 Jy ! Component: 2900 - total flux cleaned = -0.000295542 Jy ! Component: 2950 - total flux cleaned = -0.000310752 Jy ! Component: 3000 - total flux cleaned = -0.000430635 Jy ! Component: 3050 - total flux cleaned = -0.00034145 Jy ! Component: 3100 - total flux cleaned = -0.000430176 Jy ! Component: 3150 - total flux cleaned = -0.000474287 Jy ! Component: 3200 - total flux cleaned = -0.000518108 Jy ! Component: 3250 - total flux cleaned = -0.000561474 Jy ! Component: 3300 - total flux cleaned = -0.000547074 Jy ! Component: 3350 - total flux cleaned = -0.000618525 Jy ! Component: 3400 - total flux cleaned = -0.000646849 Jy ! Component: 3450 - total flux cleaned = -0.000675055 Jy ! Component: 3500 - total flux cleaned = -0.000731065 Jy ! Component: 3550 - total flux cleaned = -0.000703297 Jy ! Component: 3600 - total flux cleaned = -0.000772586 Jy ! Component: 3650 - total flux cleaned = -0.00084122 Jy ! Component: 3700 - total flux cleaned = -0.000800128 Jy ! Component: 3750 - total flux cleaned = -0.000800249 Jy ! Component: 3800 - total flux cleaned = -0.000881264 Jy ! Component: 3850 - total flux cleaned = -0.000827669 Jy ! Component: 3900 - total flux cleaned = -0.000841074 Jy ! Component: 3950 - total flux cleaned = -0.00090742 Jy ! Component: 4000 - total flux cleaned = -0.000907386 Jy ! Component: 4050 - total flux cleaned = -0.00097306 Jy ! Total flux subtracted in 4096 components = -0.000946982 Jy ! Clean residual min=-0.000796 max=0.000660 Jy/beam ! Clean residual mean=0.000001 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0826517 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 402 components and 0.0826517 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1022-0443_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 7.952 at -3.784 degrees (North through East) ! Clean map min=-0.0017779 max=0.073877 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1022-0443_S_map.fits wmodel /vlbi/uf001/uva//J1022-0443_S_map.mod ! Writing 402 model components to file: /vlbi/uf001/uva//J1022-0443_S_map.mod wobs /vlbi/uf001/uva//J1022-0443_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1022-0443_S_uvs.fits wwins /vlbi/uf001/uva//J1022-0443_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1022-0443_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0738765 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244283 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.991993 0.991993 1.98399 3.96797 7.93594 15.8719 31.7438 63.4875 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.073 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 302.421 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1022-0443_S_dfm.log closed on Mon Jan 14 00:51:48 2019