! Started logfile: /vlbi/uf001/uvm//J1017+6116_X_a_dfm.log on Sun Jan 13 21:19:50 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1017+6116_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1017+6116_X_a_uvm.fits ! AN table 1: 4 integrations on 28 of 28 possible baselines. ! AN table 2: 21 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698202 visibilities/baseline/integration-bin. ! Found source: J1017+6116 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 8856 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1017+6116_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.068795Jy sigma=22.002337 ! Fit after self-cal, rms=0.699702Jy sigma=14.800570 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7569 mas, bmaj=1.074 mas, bpa=13.15 degrees ! Estimated noise=0.524907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214331 Jy ! Component: 100 - total flux cleaned = 0.303593 Jy ! Total flux subtracted in 100 components = 0.303593 Jy ! Clean residual min=-0.023009 max=0.088434 Jy/beam ! Clean residual mean=0.000075 rms=0.004769 Jy/beam ! Combined flux in latest and established models = 0.303593 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.303593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174918Jy sigma=3.485762 ! Fit after self-cal, rms=0.174190Jy sigma=3.469360 ! Inverting map ! Added new window around map position (-1.6, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0809887 Jy ! Component: 100 - total flux cleaned = 0.125756 Jy ! Total flux subtracted in 100 components = 0.125756 Jy ! Clean residual min=-0.013101 max=0.034777 Jy/beam ! Clean residual mean=0.000045 rms=0.002930 Jy/beam ! Combined flux in latest and established models = 0.429349 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.429349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114266Jy sigma=2.271730 ! Fit after self-cal, rms=0.107946Jy sigma=2.133737 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393164 Jy ! Component: 100 - total flux cleaned = 0.0620507 Jy ! Total flux subtracted in 100 components = 0.0620507 Jy ! Clean residual min=-0.008373 max=0.017953 Jy/beam ! Clean residual mean=0.000030 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 0.4914 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.4914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085861Jy sigma=1.689948 ! Fit after self-cal, rms=0.084348Jy sigma=1.657300 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189775 Jy ! Component: 100 - total flux cleaned = 0.030763 Jy ! Total flux subtracted in 100 components = 0.030763 Jy ! Clean residual min=-0.007479 max=0.013263 Jy/beam ! Clean residual mean=0.000022 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.522163 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.522163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077962Jy sigma=1.526719 ! Fit after self-cal, rms=0.077571Jy sigma=1.518387 ! Inverting map ! Added new window around map position (1.8, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125808 Jy ! Component: 100 - total flux cleaned = 0.0208417 Jy ! Total flux subtracted in 100 components = 0.0208417 Jy ! Clean residual min=-0.007146 max=0.008839 Jy/beam ! Clean residual mean=0.000018 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.543004 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.543004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074955Jy sigma=1.460897 ! Fit after self-cal, rms=0.074818Jy sigma=1.458261 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9272 mas, bmaj=1.315 mas, bpa=16.21 degrees ! Estimated noise=0.386227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114657 Jy ! Component: 100 - total flux cleaned = 0.0176143 Jy ! Component: 150 - total flux cleaned = 0.0220667 Jy ! Component: 200 - total flux cleaned = 0.025792 Jy ! Total flux subtracted in 200 components = 0.025792 Jy ! Clean residual min=-0.006269 max=0.008081 Jy/beam ! Clean residual mean=0.000055 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.568796 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 0.568796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072354Jy sigma=1.405650 ! Fit after self-cal, rms=0.072234Jy sigma=1.403189 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9272 x 1.315 at 16.21 degrees (North through East) ! Clean map min=-0.0059149 max=0.27838 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 HN 0.91 LA 0.95 MK 1.23 ! NL 1.18 OV 1.52 PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 HN 0.88 KP 1.02 ! LA 0.96 MK 1.04 NL 1.09 OV 0.91 ! PT 0.94 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 1.00 LA 0.98 MK 1.10 ! NL 1.09 OV 1.35 PT 0.99 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 0.89 KP 1.04 ! LA 0.96 MK 1.02 NL 1.07 OV 0.91 ! PT 0.94 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.95 LA 1.01 MK 1.21 ! NL 1.16 OV 1.23 PT 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 0.89 KP 1.04 ! LA 0.97 MK 1.02 NL 1.09 OV 0.90 ! PT 0.93 SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.98 LA 1.01 MK 1.12 ! NL 1.08 OV 1.54 PT 1.03 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 HN 0.87 KP 1.04 ! LA 0.97 MK 1.05 NL 1.09 OV 0.91 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.90 LA 0.94 MK 1.14 ! NL 1.23 OV 1.32 PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.01 HN 0.88 KP 1.03 ! LA 0.98 MK 1.02 NL 1.10 OV 0.92 ! PT 0.94 SC 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.99 LA 0.93 MK 1.20 ! NL 1.16 OV 1.63 PT 0.97 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 0.93 KP 1.02 ! LA 0.96 MK 1.05 NL 1.10 OV 0.91 ! PT 0.92 SC 0.92 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.01 LA 0.90 MK 1.16 ! NL 1.13 OV 1.41 PT 1.00 SC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 HN 0.88 KP 1.03 ! LA 0.98 MK 1.04 NL 1.09 OV 0.92 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.95 LA 0.99 MK 1.02 ! NL 1.14 OV 1.38 PT 1.05 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 HN 0.89 KP 1.03 ! LA 0.97 MK 1.03 NL 1.09 OV 0.93 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 HN 0.89 LA 1.00 MK 1.14 ! NL 1.18 OV 1.46 PT 0.99 SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 0.91 KP 1.04 ! LA 0.96 MK 1.04 NL 1.11 OV 0.91 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.88 LA 1.05 MK 1.21 ! NL 1.14 OV 1.37 PT 0.96 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 0.88 KP 1.02 ! LA 0.98 MK 1.03 NL 1.12 OV 0.90 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 0.89 LA 0.97 MK 0.93 ! NL 1.22 OV 1.47 PT 1.04 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.01 HN 0.87 KP 1.03 ! LA 0.98 MK 1.04 NL 1.11 OV 0.90 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 0.97 LA 0.94 MK 1.12 ! NL 1.14 OV 1.31 PT 0.98 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 0.87 KP 1.05 ! LA 0.96 MK 1.02 NL 1.12 OV 0.91 ! PT 0.96 SC 0.94 ! ! ! Fit before self-cal, rms=0.072234Jy sigma=1.403189 ! Fit after self-cal, rms=0.063174Jy sigma=1.227427 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9179 mas, bmaj=1.331 mas, bpa=17.44 degrees ! Estimated noise=0.383051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032294 Jy ! Component: 100 - total flux cleaned = -0.00417271 Jy ! Component: 150 - total flux cleaned = -0.00447848 Jy ! Component: 200 - total flux cleaned = -0.00461137 Jy ! Total flux subtracted in 200 components = -0.00461137 Jy ! Clean residual min=-0.003806 max=0.004749 Jy/beam ! Clean residual mean=0.000030 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.564185 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.564185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062186Jy sigma=1.205886 ! Fit after self-cal, rms=0.062203Jy sigma=1.204708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062203Jy sigma=1.204708 ! Fit after self-cal, rms=0.059400Jy sigma=1.140433 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9151 mas, bmaj=1.33 mas, bpa=17.44 degrees ! Estimated noise=0.382442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108987 Jy ! Component: 100 - total flux cleaned = 0.000542661 Jy ! Component: 150 - total flux cleaned = 7.14267e-05 Jy ! Component: 200 - total flux cleaned = -0.000265331 Jy ! Total flux subtracted in 200 components = -0.000265331 Jy ! Clean residual min=-0.003234 max=0.002834 Jy/beam ! Clean residual mean=0.000008 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.56392 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.56392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059076Jy sigma=1.132048 ! Fit after self-cal, rms=0.059064Jy sigma=1.131505 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038615 Jy ! Component: 100 - total flux cleaned = 1.26041e-05 Jy ! Component: 150 - total flux cleaned = -0.000322456 Jy ! Component: 200 - total flux cleaned = -0.000505359 Jy ! Total flux subtracted in 200 components = -0.000505359 Jy ! Clean residual min=-0.002953 max=0.002827 Jy/beam ! Clean residual mean=0.000008 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.563414 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.563414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058921Jy sigma=1.127852 ! Fit after self-cal, rms=0.058906Jy sigma=1.127618 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058906Jy sigma=1.127618 ! Fit after self-cal, rms=0.057788Jy sigma=1.105173 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9116 mas, bmaj=1.329 mas, bpa=17.21 degrees ! Estimated noise=0.381138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271012 Jy ! Component: 100 - total flux cleaned = -0.000419182 Jy ! Component: 150 - total flux cleaned = -0.00060882 Jy ! Component: 200 - total flux cleaned = -0.000782075 Jy ! Total flux subtracted in 200 components = -0.000782075 Jy ! Clean residual min=-0.002493 max=0.002499 Jy/beam ! Clean residual mean=0.000005 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.562632 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.562632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057648Jy sigma=1.101689 ! Fit after self-cal, rms=0.057638Jy sigma=1.101477 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.2, 48.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189436 Jy ! Component: 100 - total flux cleaned = 0.00201224 Jy ! Component: 150 - total flux cleaned = 0.00190545 Jy ! Component: 200 - total flux cleaned = 0.00175594 Jy ! Total flux subtracted in 200 components = 0.00175594 Jy ! Clean residual min=-0.002397 max=0.001925 Jy/beam ! Clean residual mean=0.000006 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.564388 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 0.564388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057510Jy sigma=1.098579 ! Fit after self-cal, rms=0.057506Jy sigma=1.098472 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057506Jy sigma=1.098472 ! Fit after self-cal, rms=0.057409Jy sigma=1.098011 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=2.495 mas, bpa=17.32 degrees ! Estimated noise=0.528787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037256 Jy ! Component: 100 - total flux cleaned = -0.000416835 Jy ! Component: 150 - total flux cleaned = -0.000526723 Jy ! Component: 200 - total flux cleaned = -0.000591983 Jy ! Total flux subtracted in 200 components = -0.000591983 Jy ! Clean residual min=-0.002213 max=0.002230 Jy/beam ! Clean residual mean=0.000017 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.563796 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.563796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057378Jy sigma=1.097369 ! Fit after self-cal, rms=0.057375Jy sigma=1.097330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.29341e-05 Jy ! Component: 100 - total flux cleaned = -5.90894e-05 Jy ! Component: 150 - total flux cleaned = -8.24517e-05 Jy ! Component: 200 - total flux cleaned = -0.000121762 Jy ! Total flux subtracted in 200 components = -0.000121762 Jy ! Clean residual min=-0.002106 max=0.002265 Jy/beam ! Clean residual mean=0.000018 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.563675 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.563675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057373Jy sigma=1.097307 ! Fit after self-cal, rms=0.057372Jy sigma=1.097294 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9097 mas, bmaj=1.329 mas, bpa=17.11 degrees ! Estimated noise=0.380624 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9097 x 1.329 at 17.11 degrees (North through East) ! Clean map min=-0.0018051 max=0.27287 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7454 mas, bmaj=1.091 mas, bpa=14.89 degrees ! Estimated noise=0.513295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213111 Jy ! Component: 100 - total flux cleaned = 0.327456 Jy ! Component: 150 - total flux cleaned = 0.398698 Jy ! Component: 200 - total flux cleaned = 0.444172 Jy ! Total flux subtracted in 200 components = 0.444172 Jy ! Clean residual min=-0.007694 max=0.023790 Jy/beam ! Clean residual mean=0.000031 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.444172 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.444172 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9097 mas, bmaj=1.329 mas, bpa=17.11 degrees ! Estimated noise=0.380624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423509 Jy ! Component: 100 - total flux cleaned = 0.0664413 Jy ! Component: 150 - total flux cleaned = 0.0811284 Jy ! Component: 200 - total flux cleaned = 0.0904106 Jy ! Total flux subtracted in 200 components = 0.0904106 Jy ! Clean residual min=-0.002539 max=0.005256 Jy/beam ! Clean residual mean=0.000028 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.534583 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 35 components and 0.534583 Jy ! Inverting map ! Added new window around map position (-2.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650242 Jy ! Component: 100 - total flux cleaned = 0.011262 Jy ! Component: 150 - total flux cleaned = 0.0149332 Jy ! Component: 200 - total flux cleaned = 0.017904 Jy ! Total flux subtracted in 200 components = 0.017904 Jy ! Clean residual min=-0.002028 max=0.002562 Jy/beam ! Clean residual mean=0.000014 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.552487 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 52 components and 0.552487 Jy ! Inverting map ! Added new window around map position (1.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269164 Jy ! Component: 100 - total flux cleaned = 0.00471385 Jy ! Component: 150 - total flux cleaned = 0.00601299 Jy ! Component: 200 - total flux cleaned = 0.0067901 Jy ! Total flux subtracted in 200 components = 0.0067901 Jy ! Clean residual min=-0.001888 max=0.001930 Jy/beam ! Clean residual mean=0.000010 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.559277 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 66 components and 0.559277 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=2.495 mas, bpa=17.32 degrees ! Estimated noise=0.528787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186117 Jy ! Component: 100 - total flux cleaned = 0.00288626 Jy ! Component: 150 - total flux cleaned = 0.00332942 Jy ! Component: 200 - total flux cleaned = 0.0035283 Jy ! Total flux subtracted in 200 components = 0.0035283 Jy ! Clean residual min=-0.002213 max=0.002256 Jy/beam ! Clean residual mean=0.000020 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.562805 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170576 Jy ! Component: 100 - total flux cleaned = 0.000295285 Jy ! Component: 150 - total flux cleaned = 0.000403971 Jy ! Component: 200 - total flux cleaned = 0.000499953 Jy ! Total flux subtracted in 200 components = 0.000499953 Jy ! Clean residual min=-0.002246 max=0.002205 Jy/beam ! Clean residual mean=0.000019 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.563305 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 109 components and 0.563305 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9097 mas, bmaj=1.329 mas, bpa=17.11 degrees ! Estimated noise=0.380624 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000665187 Jy ! Component: 100 - total flux cleaned = -0.000776642 Jy ! Component: 150 - total flux cleaned = -0.000778125 Jy ! Component: 200 - total flux cleaned = -0.000777316 Jy ! Total flux subtracted in 200 components = -0.000777316 Jy ! Clean residual min=-0.001839 max=0.001934 Jy/beam ! Clean residual mean=0.000008 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.562528 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.562528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057194Jy sigma=1.092140 ! Fit after self-cal, rms=0.057129Jy sigma=1.090908 wmodel J1017+6116_X_a_map.mod ! Writing 123 model components to file: J1017+6116_X_a_map.mod wobs J1017+6116_X_a_uvs.fits ! Writing UV FITS file: J1017+6116_X_a_uvs.fits wwins J1017+6116_X_a_map.win ! wwins: Wrote 7 windows to J1017+6116_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028764 Jy ! Component: 100 - total flux cleaned = 0.000254405 Jy ! Component: 150 - total flux cleaned = 0.000221668 Jy ! Component: 200 - total flux cleaned = 0.000221185 Jy ! Component: 250 - total flux cleaned = 0.00025234 Jy ! Component: 300 - total flux cleaned = 0.000342463 Jy ! Component: 350 - total flux cleaned = 0.000342584 Jy ! Component: 400 - total flux cleaned = 0.000343023 Jy ! Component: 450 - total flux cleaned = 0.000314588 Jy ! Component: 500 - total flux cleaned = 0.000286461 Jy ! Component: 550 - total flux cleaned = 0.000230771 Jy ! Component: 600 - total flux cleaned = 0.000175981 Jy ! Component: 650 - total flux cleaned = 0.000121836 Jy ! Component: 700 - total flux cleaned = 9.53201e-05 Jy ! Component: 750 - total flux cleaned = 1.57449e-05 Jy ! Component: 800 - total flux cleaned = -3.69435e-05 Jy ! Component: 850 - total flux cleaned = -8.88039e-05 Jy ! Component: 900 - total flux cleaned = -8.89891e-05 Jy ! Component: 950 - total flux cleaned = -0.000165307 Jy ! Component: 1000 - total flux cleaned = -0.000139879 Jy ! Component: 1050 - total flux cleaned = -8.96306e-05 Jy ! Component: 1100 - total flux cleaned = -0.000139145 Jy ! Component: 1150 - total flux cleaned = -0.000188306 Jy ! Component: 1200 - total flux cleaned = -0.000115051 Jy ! Component: 1250 - total flux cleaned = -0.000211712 Jy ! Component: 1300 - total flux cleaned = -0.000211521 Jy ! Component: 1350 - total flux cleaned = -0.000188011 Jy ! Component: 1400 - total flux cleaned = -0.000353192 Jy ! Component: 1450 - total flux cleaned = -0.000329648 Jy ! Component: 1500 - total flux cleaned = -0.000422408 Jy ! Component: 1550 - total flux cleaned = -0.000353405 Jy ! Component: 1600 - total flux cleaned = -0.000330782 Jy ! Component: 1650 - total flux cleaned = -0.000467381 Jy ! Component: 1700 - total flux cleaned = -0.000512492 Jy ! Component: 1750 - total flux cleaned = -0.00053503 Jy ! Component: 1800 - total flux cleaned = -0.000579556 Jy ! Component: 1850 - total flux cleaned = -0.000646134 Jy ! Component: 1900 - total flux cleaned = -0.000734159 Jy ! Component: 1950 - total flux cleaned = -0.000734217 Jy ! Component: 2000 - total flux cleaned = -0.000690674 Jy ! Component: 2050 - total flux cleaned = -0.000777193 Jy ! Component: 2100 - total flux cleaned = -0.00086303 Jy ! Component: 2150 - total flux cleaned = -0.000863028 Jy ! Component: 2200 - total flux cleaned = -0.00088429 Jy ! Component: 2250 - total flux cleaned = -0.000989817 Jy ! Component: 2300 - total flux cleaned = -0.000968822 Jy ! Component: 2350 - total flux cleaned = -0.000947819 Jy ! Component: 2400 - total flux cleaned = -0.00109312 Jy ! Component: 2450 - total flux cleaned = -0.00109308 Jy ! Component: 2500 - total flux cleaned = -0.00109312 Jy ! Component: 2550 - total flux cleaned = -0.00113398 Jy ! Component: 2600 - total flux cleaned = -0.00109326 Jy ! Component: 2650 - total flux cleaned = -0.00119459 Jy ! Component: 2700 - total flux cleaned = -0.0012148 Jy ! Component: 2750 - total flux cleaned = -0.00123477 Jy ! Component: 2800 - total flux cleaned = -0.00111531 Jy ! Component: 2850 - total flux cleaned = -0.00119468 Jy ! Component: 2900 - total flux cleaned = -0.00129331 Jy ! Component: 2950 - total flux cleaned = -0.00125422 Jy ! Component: 3000 - total flux cleaned = -0.0012932 Jy ! Component: 3050 - total flux cleaned = -0.00129325 Jy ! Component: 3100 - total flux cleaned = -0.00123521 Jy ! Component: 3150 - total flux cleaned = -0.00133144 Jy ! Component: 3200 - total flux cleaned = -0.00125501 Jy ! Component: 3250 - total flux cleaned = -0.00138833 Jy ! Component: 3300 - total flux cleaned = -0.00135045 Jy ! Component: 3350 - total flux cleaned = -0.00133147 Jy ! Component: 3400 - total flux cleaned = -0.00142529 Jy ! Component: 3450 - total flux cleaned = -0.00142531 Jy ! Component: 3500 - total flux cleaned = -0.00149972 Jy ! Component: 3550 - total flux cleaned = -0.00146258 Jy ! Component: 3600 - total flux cleaned = -0.00151793 Jy ! Component: 3650 - total flux cleaned = -0.00151798 Jy ! Component: 3700 - total flux cleaned = -0.00148135 Jy ! Component: 3750 - total flux cleaned = -0.00149974 Jy ! Component: 3800 - total flux cleaned = -0.00151769 Jy ! Component: 3850 - total flux cleaned = -0.00153577 Jy ! Component: 3900 - total flux cleaned = -0.00153579 Jy ! Component: 3950 - total flux cleaned = -0.00151779 Jy ! Component: 4000 - total flux cleaned = -0.00155336 Jy ! Component: 4050 - total flux cleaned = -0.00150003 Jy ! Total flux subtracted in 4096 components = -0.00162361 Jy ! Clean residual min=-0.000920 max=0.001104 Jy/beam ! Clean residual mean=0.000003 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.560904 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 454 components and 0.560904 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1017+6116_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9097 x 1.329 at 17.11 degrees (North through East) ! Clean map min=-0.0014457 max=0.27232 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1017+6116_X_a_map.fits wmodel /vlbi/uf001/uvm//J1017+6116_X_a_map.mod ! Writing 454 model components to file: /vlbi/uf001/uvm//J1017+6116_X_a_map.mod wobs /vlbi/uf001/uvm//J1017+6116_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1017+6116_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1017+6116_X_a_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J1017+6116_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.272323 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.334119 0.334119 0.668238 1.33648 2.67295 5.34591 10.6918 21.3836 42.7673 85.5345 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.272 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 897.883 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1017+6116_X_a_dfm.log closed on Sun Jan 13 21:19:55 2019