! Started logfile: /vlbi/uf001/uva//J1013-2546_S_dfm.log on Mon Jan 14 00:48:07 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1013-2546_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1013-2546_S_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.873016 visibilities/baseline/integration-bin. ! Found source: J1013-2546 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 2640 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1013-2546_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010596Jy sigma=14.422149 ! Fit after self-cal, rms=0.835379Jy sigma=11.988134 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.529 mas, bmaj=7.654 mas, bpa=-3.057 degrees ! Estimated noise=1.28842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122813 Jy ! Component: 100 - total flux cleaned = 0.155143 Jy ! Total flux subtracted in 100 components = 0.155143 Jy ! Clean residual min=-0.009619 max=0.013864 Jy/beam ! Clean residual mean=-0.000027 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.155143 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.155143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.113939Jy sigma=1.307122 ! Fit after self-cal, rms=0.113895Jy sigma=1.306394 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=8.862 mas, bpa=-2.482 degrees ! Estimated noise=1.08705 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236287 Jy ! Component: 100 - total flux cleaned = 0.0373912 Jy ! Component: 150 - total flux cleaned = 0.0462422 Jy ! Component: 200 - total flux cleaned = 0.0505293 Jy ! Total flux subtracted in 200 components = 0.0505293 Jy ! Clean residual min=-0.007800 max=0.007787 Jy/beam ! Clean residual mean=-0.000009 rms=0.002038 Jy/beam ! Combined flux in latest and established models = 0.205672 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 56 components and 0.205673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107289Jy sigma=1.220675 ! Fit after self-cal, rms=0.107199Jy sigma=1.218458 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.028 x 8.862 at -2.482 degrees (North through East) ! Clean map min=-0.0075421 max=0.15662 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.17 KP 0.97 LA 0.95 ! MK 1.07 NL 1.03 OV 1.01 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 1.12 KP 1.00 LA 0.93 ! MK 1.00 NL 1.03 OV 0.94 PT 0.99 ! SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 HN 1.12 KP 1.00 LA 0.95 ! MK 1.04 NL 1.02 OV 0.97 PT 0.95 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.107199Jy sigma=1.218458 ! Fit after self-cal, rms=0.107711Jy sigma=1.205583 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=8.939 mas, bpa=-2.057 degrees ! Estimated noise=1.08969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000584862 Jy ! Component: 100 - total flux cleaned = -0.000579772 Jy ! Component: 150 - total flux cleaned = -0.000682905 Jy ! Component: 200 - total flux cleaned = -0.000777602 Jy ! Total flux subtracted in 200 components = -0.000777602 Jy ! Clean residual min=-0.006492 max=0.005858 Jy/beam ! Clean residual mean=0.000014 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.204895 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.204895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107321Jy sigma=1.203088 ! Fit after self-cal, rms=0.107400Jy sigma=1.202612 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107400Jy sigma=1.202612 ! Fit after self-cal, rms=0.103493Jy sigma=1.189404 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.904 mas, bpa=-2.15 degrees ! Estimated noise=1.09726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139952 Jy ! Component: 100 - total flux cleaned = 0.00132835 Jy ! Component: 150 - total flux cleaned = 0.00126136 Jy ! Component: 200 - total flux cleaned = 0.00119899 Jy ! Total flux subtracted in 200 components = 0.00119899 Jy ! Clean residual min=-0.005287 max=0.005013 Jy/beam ! Clean residual mean=0.000010 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.206094 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.206094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103324Jy sigma=1.188511 ! Fit after self-cal, rms=0.103332Jy sigma=1.188377 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160566 Jy ! Component: 100 - total flux cleaned = -0.000216187 Jy ! Component: 150 - total flux cleaned = -0.00027104 Jy ! Component: 200 - total flux cleaned = -0.000375053 Jy ! Total flux subtracted in 200 components = -0.000375053 Jy ! Clean residual min=-0.005203 max=0.005018 Jy/beam ! Clean residual mean=0.000010 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.205719 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.205719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103238Jy sigma=1.187833 ! Fit after self-cal, rms=0.103236Jy sigma=1.187788 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103236Jy sigma=1.187788 ! Fit after self-cal, rms=0.099066Jy sigma=1.183432 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=8.869 mas, bpa=-2.067 degrees ! Estimated noise=1.09398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131558 Jy ! Component: 100 - total flux cleaned = -0.000238898 Jy ! Component: 150 - total flux cleaned = -0.000420047 Jy ! Component: 200 - total flux cleaned = -0.000458441 Jy ! Total flux subtracted in 200 components = -0.000458441 Jy ! Clean residual min=-0.005333 max=0.004588 Jy/beam ! Clean residual mean=0.000005 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.20526 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.20526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098973Jy sigma=1.182633 ! Fit after self-cal, rms=0.098933Jy sigma=1.182438 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.2523e-06 Jy ! Component: 100 - total flux cleaned = -4.57484e-06 Jy ! Component: 150 - total flux cleaned = 5.90584e-05 Jy ! Component: 200 - total flux cleaned = 0.000118496 Jy ! Total flux subtracted in 200 components = 0.000118496 Jy ! Clean residual min=-0.005309 max=0.004480 Jy/beam ! Clean residual mean=0.000005 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.205379 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.205379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098897Jy sigma=1.182155 ! Fit after self-cal, rms=0.098895Jy sigma=1.182103 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098895Jy sigma=1.182103 ! Fit after self-cal, rms=0.098470Jy sigma=1.181857 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.231 mas, bmaj=17.82 mas, bpa=-2.954 degrees ! Estimated noise=1.42928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130281 Jy ! Component: 100 - total flux cleaned = -0.000215639 Jy ! Component: 150 - total flux cleaned = -0.00024611 Jy ! Component: 200 - total flux cleaned = -0.000290966 Jy ! Total flux subtracted in 200 components = -0.000290966 Jy ! Clean residual min=-0.005721 max=0.004376 Jy/beam ! Clean residual mean=0.000010 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.205088 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.205088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098457Jy sigma=1.181771 ! Fit after self-cal, rms=0.098444Jy sigma=1.181673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228442 Jy ! Component: 100 - total flux cleaned = 0.000198695 Jy ! Component: 150 - total flux cleaned = 0.000158116 Jy ! Component: 200 - total flux cleaned = 0.000142418 Jy ! Total flux subtracted in 200 components = 0.000142418 Jy ! Clean residual min=-0.005790 max=0.004381 Jy/beam ! Clean residual mean=0.000010 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.20523 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 0.20523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098442Jy sigma=1.181730 ! Fit after self-cal, rms=0.098438Jy sigma=1.181690 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.855 mas, bpa=-2.096 degrees ! Estimated noise=1.09296 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.075 x 8.855 at -2.096 degrees (North through East) ! Clean map min=-0.0050688 max=0.15968 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=7.592 mas, bpa=-2.62 degrees ! Estimated noise=1.30312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123924 Jy ! Component: 100 - total flux cleaned = 0.157036 Jy ! Component: 150 - total flux cleaned = 0.172784 Jy ! Component: 200 - total flux cleaned = 0.18256 Jy ! Total flux subtracted in 200 components = 0.18256 Jy ! Clean residual min=-0.006707 max=0.005955 Jy/beam ! Clean residual mean=-0.000007 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.18256 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.18256 Jy ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.855 mas, bpa=-2.096 degrees ! Estimated noise=1.09296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00938755 Jy ! Component: 100 - total flux cleaned = 0.0149126 Jy ! Component: 150 - total flux cleaned = 0.0184459 Jy ! Component: 200 - total flux cleaned = 0.0205098 Jy ! Total flux subtracted in 200 components = 0.0205098 Jy ! Clean residual min=-0.005073 max=0.004460 Jy/beam ! Clean residual mean=0.000002 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.20307 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 56 components and 0.20307 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.231 mas, bmaj=17.82 mas, bpa=-2.954 degrees ! Estimated noise=1.42928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246152 Jy ! Component: 100 - total flux cleaned = 0.00258186 Jy ! Component: 150 - total flux cleaned = 0.00268446 Jy ! Component: 200 - total flux cleaned = 0.00264078 Jy ! Total flux subtracted in 200 components = 0.00264078 Jy ! Clean residual min=-0.005554 max=0.004489 Jy/beam ! Clean residual mean=0.000010 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.205711 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.66748e-05 Jy ! Component: 100 - total flux cleaned = -0.000146677 Jy ! Component: 150 - total flux cleaned = -0.000211777 Jy ! Component: 200 - total flux cleaned = -0.000241375 Jy ! Total flux subtracted in 200 components = -0.000241375 Jy ! Clean residual min=-0.005602 max=0.004433 Jy/beam ! Clean residual mean=0.000009 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.20547 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.20547 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.855 mas, bpa=-2.096 degrees ! Estimated noise=1.09296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277146 Jy ! Component: 100 - total flux cleaned = -0.000501982 Jy ! Component: 150 - total flux cleaned = -0.000690343 Jy ! Component: 200 - total flux cleaned = -0.000811528 Jy ! Total flux subtracted in 200 components = -0.000811528 Jy ! Clean residual min=-0.005076 max=0.004311 Jy/beam ! Clean residual mean=0.000005 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.204658 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.204658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098419Jy sigma=1.181842 ! Fit after self-cal, rms=0.098408Jy sigma=1.181572 wmodel J1013-2546_S_map.mod ! Writing 81 model components to file: J1013-2546_S_map.mod wobs J1013-2546_S_uvs.fits ! Writing UV FITS file: J1013-2546_S_uvs.fits wwins J1013-2546_S_map.win ! wwins: Wrote 2 windows to J1013-2546_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518471 Jy ! Component: 100 - total flux cleaned = -0.000665105 Jy ! Component: 150 - total flux cleaned = -0.000663218 Jy ! Component: 200 - total flux cleaned = -0.000666705 Jy ! Component: 250 - total flux cleaned = -0.000413911 Jy ! Component: 300 - total flux cleaned = -0.000107813 Jy ! Component: 350 - total flux cleaned = 0.000243507 Jy ! Component: 400 - total flux cleaned = 0.00046938 Jy ! Component: 450 - total flux cleaned = 0.000903595 Jy ! Component: 500 - total flux cleaned = 0.00111284 Jy ! Component: 550 - total flux cleaned = 0.00126663 Jy ! Component: 600 - total flux cleaned = 0.00141547 Jy ! Component: 650 - total flux cleaned = 0.0016567 Jy ! Component: 700 - total flux cleaned = 0.00175068 Jy ! Component: 750 - total flux cleaned = 0.00188875 Jy ! Component: 800 - total flux cleaned = 0.00211286 Jy ! Component: 850 - total flux cleaned = 0.00228846 Jy ! Component: 900 - total flux cleaned = 0.00246031 Jy ! Component: 950 - total flux cleaned = 0.00283506 Jy ! Component: 1000 - total flux cleaned = 0.00312015 Jy ! Component: 1050 - total flux cleaned = 0.00332019 Jy ! Component: 1100 - total flux cleaned = 0.00347674 Jy ! Component: 1150 - total flux cleaned = 0.00374566 Jy ! Component: 1200 - total flux cleaned = 0.00393397 Jy ! Component: 1250 - total flux cleaned = 0.00415672 Jy ! Component: 1300 - total flux cleaned = 0.00441303 Jy ! Component: 1350 - total flux cleaned = 0.00473688 Jy ! Component: 1400 - total flux cleaned = 0.00491276 Jy ! Component: 1450 - total flux cleaned = 0.00512281 Jy ! Component: 1500 - total flux cleaned = 0.00529466 Jy ! Component: 1550 - total flux cleaned = 0.00546447 Jy ! Component: 1600 - total flux cleaned = 0.00559806 Jy ! Component: 1650 - total flux cleaned = 0.00573018 Jy ! Component: 1700 - total flux cleaned = 0.00582813 Jy ! Component: 1750 - total flux cleaned = 0.00595682 Jy ! Component: 1800 - total flux cleaned = 0.00614782 Jy ! Component: 1850 - total flux cleaned = 0.00624176 Jy ! Component: 1900 - total flux cleaned = 0.00636585 Jy ! Component: 1950 - total flux cleaned = 0.0065809 Jy ! Component: 2000 - total flux cleaned = 0.00676304 Jy ! Component: 2050 - total flux cleaned = 0.00703231 Jy ! Component: 2100 - total flux cleaned = 0.00715044 Jy ! Component: 2150 - total flux cleaned = 0.00723829 Jy ! Component: 2200 - total flux cleaned = 0.00746971 Jy ! Component: 2250 - total flux cleaned = 0.00755578 Jy ! Component: 2300 - total flux cleaned = 0.00766917 Jy ! Component: 2350 - total flux cleaned = 0.00783711 Jy ! Component: 2400 - total flux cleaned = 0.00789271 Jy ! Component: 2450 - total flux cleaned = 0.00805714 Jy ! Component: 2500 - total flux cleaned = 0.00816584 Jy ! Component: 2550 - total flux cleaned = 0.00830045 Jy ! Component: 2600 - total flux cleaned = 0.00840681 Jy ! Component: 2650 - total flux cleaned = 0.00853865 Jy ! Component: 2700 - total flux cleaned = 0.00869526 Jy ! Component: 2750 - total flux cleaned = 0.00879863 Jy ! Component: 2800 - total flux cleaned = 0.00890109 Jy ! Component: 2850 - total flux cleaned = 0.00902809 Jy ! Component: 2900 - total flux cleaned = 0.00910325 Jy ! Component: 2950 - total flux cleaned = 0.00917785 Jy ! Component: 3000 - total flux cleaned = 0.00915293 Jy ! Component: 3050 - total flux cleaned = 0.00925106 Jy ! Component: 3100 - total flux cleaned = 0.00937255 Jy ! Component: 3150 - total flux cleaned = 0.00946879 Jy ! Component: 3200 - total flux cleaned = 0.00956434 Jy ! Component: 3250 - total flux cleaned = 0.00958784 Jy ! Component: 3300 - total flux cleaned = 0.00963507 Jy ! Component: 3350 - total flux cleaned = 0.00970477 Jy ! Component: 3400 - total flux cleaned = 0.00970487 Jy ! Component: 3450 - total flux cleaned = 0.00981929 Jy ! Component: 3500 - total flux cleaned = 0.00986444 Jy ! Component: 3550 - total flux cleaned = 0.00984159 Jy ! Component: 3600 - total flux cleaned = 0.0098639 Jy ! Component: 3650 - total flux cleaned = 0.00997525 Jy ! Component: 3700 - total flux cleaned = 0.0100194 Jy ! Component: 3750 - total flux cleaned = 0.0100415 Jy ! Component: 3800 - total flux cleaned = 0.0100853 Jy ! Component: 3850 - total flux cleaned = 0.0101722 Jy ! Component: 3900 - total flux cleaned = 0.0102798 Jy ! Component: 3950 - total flux cleaned = 0.0103653 Jy ! Component: 4000 - total flux cleaned = 0.0103863 Jy ! Component: 4050 - total flux cleaned = 0.0104286 Jy ! Total flux subtracted in 4096 components = 0.0104287 Jy ! Clean residual min=-0.001541 max=0.001172 Jy/beam ! Clean residual mean=0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.215087 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 374 components and 0.215087 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1013-2546_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.075 x 8.855 at -2.096 degrees (North through East) ! Clean map min=-0.0031962 max=0.15939 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1013-2546_S_map.fits wmodel /vlbi/uf001/uva//J1013-2546_S_map.mod ! Writing 374 model components to file: /vlbi/uf001/uva//J1013-2546_S_map.mod wobs /vlbi/uf001/uva//J1013-2546_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1013-2546_S_uvs.fits wwins /vlbi/uf001/uva//J1013-2546_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1013-2546_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.159388 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000367226 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.691194 0.691194 1.38239 2.76478 5.52955 11.0591 22.1182 44.2364 88.4728 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.159 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 434.031 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1013-2546_S_dfm.log closed on Mon Jan 14 00:48:11 2019