! Started logfile: /vlbi/uf001/uva//J1013+4918_X_dfm.log on Mon Jan 14 00:48:00 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1013+4918_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1013+4918_X_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.801022 visibilities/baseline/integration-bin.
! Found source: J1013+4918
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 37632 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1013+4918_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004969Jy  sigma=23.649293
! Fit after  self-cal, rms=0.933703Jy  sigma=21.961923
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6977 mas, bmaj=1.146 mas, bpa=-22.25 degrees
! Estimated noise=0.396251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0530837 Jy
! Component: 100  -  total flux cleaned = 0.064668 Jy
! Total flux subtracted in 100 components = 0.064668 Jy
! Clean residual min=-0.003873 max=0.009571 Jy/beam
! Clean residual mean=0.000000 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.064668 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.064668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054823Jy  sigma=1.241011
! Fit after  self-cal, rms=0.054252Jy  sigma=1.227045
! Inverting map 
! Added new window around map position (-2.4, 6.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00828633 Jy
! Component: 100  -  total flux cleaned = 0.0125182 Jy
! Total flux subtracted in 100 components = 0.0125182 Jy
! Clean residual min=-0.003228 max=0.004708 Jy/beam
! Clean residual mean=0.000001 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.0771862 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 16 components and 0.0771862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052507Jy  sigma=1.182687
! Fit after  self-cal, rms=0.052344Jy  sigma=1.179106
! Inverting map 
! Added new window around map position (-2.2, 4.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00486855 Jy
! Component: 100  -  total flux cleaned = 0.00810997 Jy
! Total flux subtracted in 100 components = 0.00810997 Jy
! Clean residual min=-0.002889 max=0.003289 Jy/beam
! Clean residual mean=0.000001 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.0852962 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.0852962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051674Jy  sigma=1.162599
! Fit after  self-cal, rms=0.051617Jy  sigma=1.161592
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9186 mas, bmaj=1.402 mas, bpa=-19.29 degrees
! Estimated noise=0.173778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597717 Jy
! Component: 100  -  total flux cleaned = 0.00963982 Jy
! Component: 150  -  total flux cleaned = 0.0123796 Jy
! Component: 200  -  total flux cleaned = 0.0145925 Jy
! Total flux subtracted in 200 components = 0.0145925 Jy
! Clean residual min=-0.002231 max=0.002560 Jy/beam
! Clean residual mean=0.000003 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.0998887 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 64 components and 0.0998887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050822Jy  sigma=1.141447
! Fit after  self-cal, rms=0.050736Jy  sigma=1.139495
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9186 x 1.402 at -19.29 degrees (North through East)
! Clean map  min=-0.0020492  max=0.068567 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        0.94     
!   LA        0.89     MK        1.02     NL        1.15     OV        0.96     
!   PT        1.00*    SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.95     KP        1.01     
!   LA        0.88     MK        1.00     NL        1.18     OV        0.95     
!   PT        1.00*    SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.97     KP        0.96     
!   LA        0.90     MK        1.01     NL        1.14     OV        0.94     
!   PT        1.00*    SC        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        0.98     
!   LA        0.93     MK        0.99     NL        1.16     OV        0.97     
!   PT        1.00*    SC        0.90     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.00     KP        0.99     
!   LA        0.90     MK        0.97     NL        1.18     OV        0.93     
!   PT        1.00*    SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        0.98     KP        1.00     
!   LA        0.89     MK        0.97     NL        1.16     OV        0.93     
!   PT        1.00*    SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.91     MK        1.00     NL        1.16     OV        0.91     
!   PT        1.00*    SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.02     HN        0.99     KP        1.00     
!   LA        0.88     MK        1.00     NL        1.18     OV        0.91     
!   PT        1.00*    SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.00     KP        1.00     
!   LA        0.88     MK        1.00     NL        1.15     OV        0.94     
!   PT        1.00*    SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.00     KP        0.98     
!   LA        0.85     MK        1.04     NL        1.18     OV        0.94     
!   PT        1.00*    SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.87     MK        0.94     NL        1.15     OV        0.95     
!   PT        1.00*    SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.97     KP        1.00     
!   LA        0.87     MK        0.98     NL        1.22     OV        0.96     
!   PT        1.00*    SC        0.93     
! 
! 
! Fit before self-cal, rms=0.050736Jy  sigma=1.139495
! Fit after  self-cal, rms=0.049039Jy  sigma=1.125404
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=1.399 mas, bpa=-18.37 degrees
! Estimated noise=0.169187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235725 Jy
! Component: 100  -  total flux cleaned = 0.00401407 Jy
! Component: 150  -  total flux cleaned = 0.00525826 Jy
! Component: 200  -  total flux cleaned = 0.00623411 Jy
! Total flux subtracted in 200 components = 0.00623411 Jy
! Clean residual min=-0.000965 max=0.000982 Jy/beam
! Clean residual mean=0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.106123 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.106123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048898Jy  sigma=1.121513
! Fit after  self-cal, rms=0.048939Jy  sigma=1.120769
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048939Jy  sigma=1.120769
! Fit after  self-cal, rms=0.049204Jy  sigma=1.118461
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9131 mas, bmaj=1.402 mas, bpa=-18.62 degrees
! Estimated noise=0.169799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105692 Jy
! Component: 100  -  total flux cleaned = 0.00180472 Jy
! Component: 150  -  total flux cleaned = 0.00240235 Jy
! Component: 200  -  total flux cleaned = 0.00288821 Jy
! Total flux subtracted in 200 components = 0.00288821 Jy
! Clean residual min=-0.000783 max=0.000844 Jy/beam
! Clean residual mean=0.000001 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.109011 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 105 components and 0.109011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049172Jy  sigma=1.117687
! Fit after  self-cal, rms=0.049183Jy  sigma=1.117514
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27.2, 22.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457834 Jy
! Component: 100  -  total flux cleaned = 0.000720276 Jy
! Component: 150  -  total flux cleaned = 0.00094413 Jy
! Component: 200  -  total flux cleaned = 0.00106756 Jy
! Total flux subtracted in 200 components = 0.00106756 Jy
! Clean residual min=-0.000686 max=0.000707 Jy/beam
! Clean residual mean=0.000001 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.110079 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 118 components and 0.110079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049166Jy  sigma=1.117106
! Fit after  self-cal, rms=0.049165Jy  sigma=1.117062
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049165Jy  sigma=1.117062
! Fit after  self-cal, rms=0.049278Jy  sigma=1.117000
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9123 mas, bmaj=1.401 mas, bpa=-18.53 degrees
! Estimated noise=0.170249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000393977 Jy
! Component: 100  -  total flux cleaned = 0.000637892 Jy
! Component: 150  -  total flux cleaned = 0.000779279 Jy
! Component: 200  -  total flux cleaned = 0.000870574 Jy
! Total flux subtracted in 200 components = 0.000870574 Jy
! Clean residual min=-0.000662 max=0.000676 Jy/beam
! Clean residual mean=0.000001 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.110949 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 0.110949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049268Jy  sigma=1.116777
! Fit after  self-cal, rms=0.049268Jy  sigma=1.116758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159099 Jy
! Component: 100  -  total flux cleaned = 0.000244198 Jy
! Component: 150  -  total flux cleaned = 0.00030136 Jy
! Component: 200  -  total flux cleaned = 0.000366295 Jy
! Total flux subtracted in 200 components = 0.000366295 Jy
! Clean residual min=-0.000654 max=0.000664 Jy/beam
! Clean residual mean=0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.111315 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 128 components and 0.111315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049263Jy  sigma=1.116639
! Fit after  self-cal, rms=0.049263Jy  sigma=1.116632
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049263Jy  sigma=1.116632
! Fit after  self-cal, rms=0.049309Jy  sigma=1.116615
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.108 mas, bmaj=2.427 mas, bpa=-27.95 degrees
! Estimated noise=0.220585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500323 Jy
! Component: 100  -  total flux cleaned = 0.000757079 Jy
! Component: 150  -  total flux cleaned = 0.000872709 Jy
! Component: 200  -  total flux cleaned = 0.000991062 Jy
! Total flux subtracted in 200 components = 0.000991062 Jy
! Clean residual min=-0.000772 max=0.000739 Jy/beam
! Clean residual mean=0.000002 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.112306 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 138 components and 0.112306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049306Jy  sigma=1.116582
! Fit after  self-cal, rms=0.049305Jy  sigma=1.116570
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000153048 Jy
! Component: 100  -  total flux cleaned = 0.00023599 Jy
! Component: 150  -  total flux cleaned = 0.000314956 Jy
! Component: 200  -  total flux cleaned = 0.000377298 Jy
! Total flux subtracted in 200 components = 0.000377298 Jy
! Clean residual min=-0.000777 max=0.000702 Jy/beam
! Clean residual mean=0.000002 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.112684 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 145 components and 0.112684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049305Jy  sigma=1.116574
! Fit after  self-cal, rms=0.049305Jy  sigma=1.116566
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9119 mas, bmaj=1.401 mas, bpa=-18.47 degrees
! Estimated noise=0.170487 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9119 x 1.401 at -18.47 degrees (North through East)
! Clean map  min=-0.0008472  max=0.067537 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.694 mas, bmaj=1.144 mas, bpa=-21.62 degrees
! Estimated noise=0.385852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0518997 Jy
! Component: 100  -  total flux cleaned = 0.0656463 Jy
! Component: 150  -  total flux cleaned = 0.0729729 Jy
! Component: 200  -  total flux cleaned = 0.0781984 Jy
! Total flux subtracted in 200 components = 0.0781984 Jy
! Clean residual min=-0.002508 max=0.003062 Jy/beam
! Clean residual mean=0.000000 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.0781984 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0781984 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9119 mas, bmaj=1.401 mas, bpa=-18.47 degrees
! Estimated noise=0.170487 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00760163 Jy
! Component: 100  -  total flux cleaned = 0.012665 Jy
! Component: 150  -  total flux cleaned = 0.0165268 Jy
! Component: 200  -  total flux cleaned = 0.0195435 Jy
! Total flux subtracted in 200 components = 0.0195435 Jy
! Clean residual min=-0.001430 max=0.001779 Jy/beam
! Clean residual mean=0.000001 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.097742 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 74 components and 0.097742 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00239873 Jy
! Component: 100  -  total flux cleaned = 0.00435151 Jy
! Component: 150  -  total flux cleaned = 0.00596721 Jy
! Component: 200  -  total flux cleaned = 0.00733936 Jy
! Total flux subtracted in 200 components = 0.00733936 Jy
! Clean residual min=-0.000990 max=0.000898 Jy/beam
! Clean residual mean=0.000001 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.105081 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 106 components and 0.105081 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.108 mas, bmaj=2.427 mas, bpa=-27.95 degrees
! Estimated noise=0.220585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205843 Jy
! Component: 100  -  total flux cleaned = 0.00337005 Jy
! Component: 150  -  total flux cleaned = 0.00422909 Jy
! Component: 200  -  total flux cleaned = 0.00482327 Jy
! Total flux subtracted in 200 components = 0.00482327 Jy
! Clean residual min=-0.000922 max=0.000845 Jy/beam
! Clean residual mean=0.000003 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.109905 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495347 Jy
! Component: 100  -  total flux cleaned = 0.000913465 Jy
! Component: 150  -  total flux cleaned = 0.00127146 Jy
! Component: 200  -  total flux cleaned = 0.00159514 Jy
! Total flux subtracted in 200 components = 0.00159514 Jy
! Clean residual min=-0.000856 max=0.000768 Jy/beam
! Clean residual mean=0.000002 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.1115 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 160 components and 0.1115 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9119 mas, bmaj=1.401 mas, bpa=-18.47 degrees
! Estimated noise=0.170487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280435 Jy
! Component: 100  -  total flux cleaned = 0.000569856 Jy
! Component: 150  -  total flux cleaned = 0.000654846 Jy
! Component: 200  -  total flux cleaned = 0.000670264 Jy
! Total flux subtracted in 200 components = 0.000670264 Jy
! Clean residual min=-0.000736 max=0.000633 Jy/beam
! Clean residual mean=0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.11217 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 177 components and 0.11217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049312Jy  sigma=1.116761
! Fit after  self-cal, rms=0.049310Jy  sigma=1.116674
wmodel J1013+4918_X_map.mod
! Writing 177 model components to file: J1013+4918_X_map.mod
wobs   J1013+4918_X_uvs.fits
! Writing UV FITS file: J1013+4918_X_uvs.fits
wwins  J1013+4918_X_map.win
! wwins: Wrote 5 windows to J1013+4918_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000244966 Jy
! Component: 100  -  total flux cleaned = -0.000314731 Jy
! Component: 150  -  total flux cleaned = -0.00035888 Jy
! Component: 200  -  total flux cleaned = -0.000348282 Jy
! Component: 250  -  total flux cleaned = -0.000337917 Jy
! Component: 300  -  total flux cleaned = -0.000297211 Jy
! Component: 350  -  total flux cleaned = -0.000267466 Jy
! Component: 400  -  total flux cleaned = -0.000247971 Jy
! Component: 450  -  total flux cleaned = -0.000247908 Jy
! Component: 500  -  total flux cleaned = -0.000219414 Jy
! Component: 550  -  total flux cleaned = -0.000191349 Jy
! Component: 600  -  total flux cleaned = -0.000154652 Jy
! Component: 650  -  total flux cleaned = -0.000109549 Jy
! Component: 700  -  total flux cleaned = -0.000118564 Jy
! Component: 750  -  total flux cleaned = -0.000127162 Jy
! Component: 800  -  total flux cleaned = -0.000135874 Jy
! Component: 850  -  total flux cleaned = -0.000127268 Jy
! Component: 900  -  total flux cleaned = -0.000135679 Jy
! Component: 950  -  total flux cleaned = -0.000144011 Jy
! Component: 1000  -  total flux cleaned = -0.000135851 Jy
! Component: 1050  -  total flux cleaned = -0.000160529 Jy
! Component: 1100  -  total flux cleaned = -0.0001523 Jy
! Component: 1150  -  total flux cleaned = -0.000152244 Jy
! Component: 1200  -  total flux cleaned = -0.000120478 Jy
! Component: 1250  -  total flux cleaned = -0.000128356 Jy
! Component: 1300  -  total flux cleaned = -0.000128275 Jy
! Component: 1350  -  total flux cleaned = -0.000112744 Jy
! Component: 1400  -  total flux cleaned = -5.14753e-05 Jy
! Component: 1450  -  total flux cleaned = -5.91514e-05 Jy
! Component: 1500  -  total flux cleaned = -2.90829e-05 Jy
! Component: 1550  -  total flux cleaned = -6.78289e-06 Jy
! Component: 1600  -  total flux cleaned = -6.7919e-06 Jy
! Component: 1650  -  total flux cleaned = 5.17115e-07 Jy
! Component: 1700  -  total flux cleaned = 7.76721e-06 Jy
! Component: 1750  -  total flux cleaned = 3.58657e-07 Jy
! Component: 1800  -  total flux cleaned = 2.91048e-05 Jy
! Component: 1850  -  total flux cleaned = 7.68426e-06 Jy
! Component: 1900  -  total flux cleaned = -1.35221e-05 Jy
! Component: 1950  -  total flux cleaned = 7.58679e-06 Jy
! Component: 2000  -  total flux cleaned = -1.33256e-05 Jy
! Component: 2050  -  total flux cleaned = -1.33141e-05 Jy
! Component: 2100  -  total flux cleaned = -6.44321e-06 Jy
! Component: 2150  -  total flux cleaned = -2.01687e-05 Jy
! Component: 2200  -  total flux cleaned = -2.02065e-05 Jy
! Component: 2250  -  total flux cleaned = -6.73501e-06 Jy
! Component: 2300  -  total flux cleaned = 6.65012e-06 Jy
! Component: 2350  -  total flux cleaned = 6.60514e-06 Jy
! Component: 2400  -  total flux cleaned = 1.32309e-05 Jy
! Component: 2450  -  total flux cleaned = 1.97617e-05 Jy
! Component: 2500  -  total flux cleaned = 6.76483e-06 Jy
! Component: 2550  -  total flux cleaned = 1.32222e-05 Jy
! Component: 2600  -  total flux cleaned = 6.79742e-06 Jy
! Component: 2650  -  total flux cleaned = 1.95697e-05 Jy
! Component: 2700  -  total flux cleaned = 4.50105e-05 Jy
! Component: 2750  -  total flux cleaned = 2.60185e-05 Jy
! Component: 2800  -  total flux cleaned = 1.96996e-05 Jy
! Component: 2850  -  total flux cleaned = 4.46768e-05 Jy
! Component: 2900  -  total flux cleaned = 5.09175e-05 Jy
! Component: 2950  -  total flux cleaned = 5.09497e-05 Jy
! Component: 3000  -  total flux cleaned = 4.48267e-05 Jy
! Component: 3050  -  total flux cleaned = 5.08962e-05 Jy
! Component: 3100  -  total flux cleaned = 5.08921e-05 Jy
! Component: 3150  -  total flux cleaned = 4.48477e-05 Jy
! Component: 3200  -  total flux cleaned = 7.48717e-05 Jy
! Component: 3250  -  total flux cleaned = 4.50203e-05 Jy
! Component: 3300  -  total flux cleaned = 6.87497e-05 Jy
! Component: 3350  -  total flux cleaned = 5.68678e-05 Jy
! Component: 3400  -  total flux cleaned = 5.69121e-05 Jy
! Component: 3450  -  total flux cleaned = 5.1062e-05 Jy
! Component: 3500  -  total flux cleaned = 6.27071e-05 Jy
! Component: 3550  -  total flux cleaned = 2.79017e-05 Jy
! Component: 3600  -  total flux cleaned = 4.52551e-05 Jy
! Component: 3650  -  total flux cleaned = 3.37418e-05 Jy
! Component: 3700  -  total flux cleaned = 3.37272e-05 Jy
! Component: 3750  -  total flux cleaned = 4.50998e-05 Jy
! Component: 3800  -  total flux cleaned = 4.50886e-05 Jy
! Component: 3850  -  total flux cleaned = 3.38012e-05 Jy
! Component: 3900  -  total flux cleaned = 5.06319e-05 Jy
! Component: 3950  -  total flux cleaned = 2.278e-05 Jy
! Component: 4000  -  total flux cleaned = 2.27923e-05 Jy
! Component: 4050  -  total flux cleaned = 1.17192e-05 Jy
! Total flux subtracted in 4096 components = 2.26885e-05 Jy
! Clean residual min=-0.000373 max=0.000305 Jy/beam
! Clean residual mean=0.000000 rms=0.000092 Jy/beam
! Combined flux in latest and established models = 0.112193 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 490 components and 0.112193 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1013+4918_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9119 x 1.401 at -18.47 degrees (North through East)
! Clean map  min=-0.0007346  max=0.067251 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1013+4918_X_map.fits
wmodel /vlbi/uf001/uva//J1013+4918_X_map.mod
! Writing 490 model components to file: /vlbi/uf001/uva//J1013+4918_X_map.mod
wobs   /vlbi/uf001/uva//J1013+4918_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1013+4918_X_uvs.fits
wwins  /vlbi/uf001/uva//J1013+4918_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1013+4918_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0672513 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.15781e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.408519 0.408519 0.817038 1.63408 3.26815 6.53631 13.0726 26.1452 52.2905
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.067 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  734.359 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1013+4918_X_dfm.log closed on Mon Jan 14 00:48:06 2019