! Started logfile: /vlbi/uf001/uva//J1013+4918_S_dfm.log on Mon Jan 14 00:47:55 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1013+4918_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1013+4918_S_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.801022 visibilities/baseline/integration-bin.
! Found source: J1013+4918
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9408 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1013+4918_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 114 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 114 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 114 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006945Jy  sigma=21.743079
! Fit after  self-cal, rms=0.864837Jy  sigma=18.665315
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=4.914 mas, bpa=-21.39 degrees
! Estimated noise=0.582733 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0989099 Jy
! Component: 100  -  total flux cleaned = 0.133817 Jy
! Total flux subtracted in 100 components = 0.133817 Jy
! Clean residual min=-0.007263 max=0.019206 Jy/beam
! Clean residual mean=0.000003 rms=0.002095 Jy/beam
! Combined flux in latest and established models = 0.133817 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.133817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069107Jy  sigma=1.441232
! Fit after  self-cal, rms=0.068979Jy  sigma=1.438618
! Inverting map 
! Added new window around map position (2, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210786 Jy
! Component: 100  -  total flux cleaned = 0.0342404 Jy
! Total flux subtracted in 100 components = 0.0342404 Jy
! Clean residual min=-0.004763 max=0.007064 Jy/beam
! Clean residual mean=-0.000001 rms=0.001259 Jy/beam
! Combined flux in latest and established models = 0.168057 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.168057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060335Jy  sigma=1.243182
! Fit after  self-cal, rms=0.060070Jy  sigma=1.237755
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00960754 Jy
! Component: 100  -  total flux cleaned = 0.0159254 Jy
! Total flux subtracted in 100 components = 0.0159254 Jy
! Clean residual min=-0.004014 max=0.004345 Jy/beam
! Clean residual mean=-0.000002 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.183982 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 43 components and 0.183982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058020Jy  sigma=1.191427
! Fit after  self-cal, rms=0.057960Jy  sigma=1.190228
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.608 mas, bmaj=5.628 mas, bpa=-19.14 degrees
! Estimated noise=0.349272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00651926 Jy
! Component: 100  -  total flux cleaned = 0.0103803 Jy
! Component: 150  -  total flux cleaned = 0.0127689 Jy
! Component: 200  -  total flux cleaned = 0.0142912 Jy
! Total flux subtracted in 200 components = 0.0142912 Jy
! Clean residual min=-0.002854 max=0.002660 Jy/beam
! Clean residual mean=-0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.198274 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 58 components and 0.198274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057184Jy  sigma=1.173284
! Fit after  self-cal, rms=0.057158Jy  sigma=1.172767
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.608 x 5.628 at -19.14 degrees (North through East)
! Clean map  min=-0.0028302  max=0.13026 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.98     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.00     OV        1.00     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.98     KP        1.02     
!   LA        1.00     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.89     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.057158Jy  sigma=1.172767
! Fit after  self-cal, rms=0.057069Jy  sigma=1.163068
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=5.655 mas, bpa=-19.61 degrees
! Estimated noise=0.349616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115669 Jy
! Component: 100  -  total flux cleaned = 0.0014642 Jy
! Component: 150  -  total flux cleaned = 0.00150308 Jy
! Component: 200  -  total flux cleaned = 0.00150302 Jy
! Total flux subtracted in 200 components = 0.00150302 Jy
! Clean residual min=-0.002191 max=0.002044 Jy/beam
! Clean residual mean=-0.000014 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.199777 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 65 components and 0.199777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057045Jy  sigma=1.162464
! Fit after  self-cal, rms=0.057058Jy  sigma=1.162300
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057058Jy  sigma=1.162300
! Fit after  self-cal, rms=0.056369Jy  sigma=1.152411
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.598 mas, bmaj=5.657 mas, bpa=-19.76 degrees
! Estimated noise=0.349782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.87331e-05 Jy
! Component: 100  -  total flux cleaned = 8.70567e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103392 Jy
! Component: 200  -  total flux cleaned = 0.000118751 Jy
! Total flux subtracted in 200 components = 0.000118751 Jy
! Clean residual min=-0.001819 max=0.001606 Jy/beam
! Clean residual mean=-0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.199895 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.199895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056357Jy  sigma=1.152181
! Fit after  self-cal, rms=0.056362Jy  sigma=1.152082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.97685e-05 Jy
! Component: 100  -  total flux cleaned = -2.97045e-05 Jy
! Component: 150  -  total flux cleaned = -1.62428e-05 Jy
! Component: 200  -  total flux cleaned = -1.59968e-05 Jy
! Total flux subtracted in 200 components = -1.59968e-05 Jy
! Clean residual min=-0.001808 max=0.001588 Jy/beam
! Clean residual mean=-0.000002 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.199879 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 0.199879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056355Jy  sigma=1.151936
! Fit after  self-cal, rms=0.056355Jy  sigma=1.151923
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056355Jy  sigma=1.151923
! Fit after  self-cal, rms=0.056394Jy  sigma=1.151900
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.593 mas, bmaj=5.656 mas, bpa=-19.81 degrees
! Estimated noise=0.349942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280509 Jy
! Component: 100  -  total flux cleaned = 0.000354988 Jy
! Component: 150  -  total flux cleaned = 0.000367689 Jy
! Component: 200  -  total flux cleaned = 0.000367497 Jy
! Total flux subtracted in 200 components = 0.000367497 Jy
! Clean residual min=-0.001778 max=0.001553 Jy/beam
! Clean residual mean=-0.000002 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.200247 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.200247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056388Jy  sigma=1.151753
! Fit after  self-cal, rms=0.056388Jy  sigma=1.151742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.78366e-06 Jy
! Component: 100  -  total flux cleaned = -1.43905e-06 Jy
! Component: 150  -  total flux cleaned = 1.03533e-05 Jy
! Component: 200  -  total flux cleaned = 1.04269e-05 Jy
! Total flux subtracted in 200 components = 1.04269e-05 Jy
! Clean residual min=-0.001767 max=0.001540 Jy/beam
! Clean residual mean=-0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.200257 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 78 components and 0.200257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056383Jy  sigma=1.151641
! Fit after  self-cal, rms=0.056383Jy  sigma=1.151636
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056383Jy  sigma=1.151636
! Fit after  self-cal, rms=0.056401Jy  sigma=1.151618
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.711 mas, bmaj=9.298 mas, bpa=-27.84 degrees
! Estimated noise=0.44529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000512419 Jy
! Component: 100  -  total flux cleaned = 0.00056059 Jy
! Component: 150  -  total flux cleaned = 0.0005425 Jy
! Component: 200  -  total flux cleaned = 0.000527679 Jy
! Total flux subtracted in 200 components = 0.000527679 Jy
! Clean residual min=-0.001679 max=0.001635 Jy/beam
! Clean residual mean=-0.000003 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.200785 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 85 components and 0.200785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056399Jy  sigma=1.151585
! Fit after  self-cal, rms=0.056397Jy  sigma=1.151560
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.46455e-05 Jy
! Component: 100  -  total flux cleaned = 2.83294e-05 Jy
! Component: 150  -  total flux cleaned = 2.31863e-05 Jy
! Component: 200  -  total flux cleaned = 1.4066e-05 Jy
! Total flux subtracted in 200 components = 1.4066e-05 Jy
! Clean residual min=-0.001676 max=0.001638 Jy/beam
! Clean residual mean=-0.000003 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.200799 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 90 components and 0.200799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056397Jy  sigma=1.151558
! Fit after  self-cal, rms=0.056396Jy  sigma=1.151547
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.589 mas, bmaj=5.653 mas, bpa=-19.86 degrees
! Estimated noise=0.350092 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.589 x 5.653 at -19.86 degrees (North through East)
! Clean map  min=-0.0016611  max=0.12995 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.951 mas, bmaj=4.933 mas, bpa=-22 degrees
! Estimated noise=0.583638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0988383 Jy
! Component: 100  -  total flux cleaned = 0.135994 Jy
! Component: 150  -  total flux cleaned = 0.157783 Jy
! Component: 200  -  total flux cleaned = 0.17146 Jy
! Total flux subtracted in 200 components = 0.17146 Jy
! Clean residual min=-0.004023 max=0.007233 Jy/beam
! Clean residual mean=0.000002 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.17146 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.17146 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.589 mas, bmaj=5.653 mas, bpa=-19.86 degrees
! Estimated noise=0.350092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115351 Jy
! Component: 100  -  total flux cleaned = 0.0183363 Jy
! Component: 150  -  total flux cleaned = 0.0225007 Jy
! Component: 200  -  total flux cleaned = 0.0251251 Jy
! Total flux subtracted in 200 components = 0.0251251 Jy
! Clean residual min=-0.001903 max=0.001950 Jy/beam
! Clean residual mean=-0.000000 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.196585 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 54 components and 0.196585 Jy
! Inverting map 
! Added new window around map position (2, 5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199474 Jy
! Component: 100  -  total flux cleaned = 0.00333081 Jy
! Component: 150  -  total flux cleaned = 0.00417597 Jy
! Component: 200  -  total flux cleaned = 0.00462126 Jy
! Total flux subtracted in 200 components = 0.00462126 Jy
! Clean residual min=-0.001712 max=0.001537 Jy/beam
! Clean residual mean=-0.000002 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.201207 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 72 components and 0.201207 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.711 mas, bmaj=9.298 mas, bpa=-27.84 degrees
! Estimated noise=0.44529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000372344 Jy
! Component: 100  -  total flux cleaned = 0.000484309 Jy
! Component: 150  -  total flux cleaned = 0.000547514 Jy
! Component: 200  -  total flux cleaned = 0.000575088 Jy
! Total flux subtracted in 200 components = 0.000575088 Jy
! Clean residual min=-0.001679 max=0.001496 Jy/beam
! Clean residual mean=-0.000004 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.201782 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.69526e-05 Jy
! Component: 100  -  total flux cleaned = 4.76595e-05 Jy
! Component: 150  -  total flux cleaned = 7.82078e-05 Jy
! Component: 200  -  total flux cleaned = 9.6218e-05 Jy
! Total flux subtracted in 200 components = 9.6218e-05 Jy
! Clean residual min=-0.001681 max=0.001471 Jy/beam
! Clean residual mean=-0.000005 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.201878 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 100 components and 0.201878 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.589 mas, bmaj=5.653 mas, bpa=-19.86 degrees
! Estimated noise=0.350092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.19214e-05 Jy
! Component: 100  -  total flux cleaned = 3.14232e-05 Jy
! Component: 150  -  total flux cleaned = 9.25393e-06 Jy
! Component: 200  -  total flux cleaned = 4.7955e-05 Jy
! Total flux subtracted in 200 components = 4.7955e-05 Jy
! Clean residual min=-0.001714 max=0.001493 Jy/beam
! Clean residual mean=-0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.201926 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 114 components and 0.201926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056388Jy  sigma=1.151464
! Fit after  self-cal, rms=0.056382Jy  sigma=1.151302
wmodel J1013+4918_S_map.mod
! Writing 114 model components to file: J1013+4918_S_map.mod
wobs   J1013+4918_S_uvs.fits
! Writing UV FITS file: J1013+4918_S_uvs.fits
wwins  J1013+4918_S_map.win
! wwins: Wrote 3 windows to J1013+4918_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197227 Jy
! Component: 100  -  total flux cleaned = -0.000198095 Jy
! Component: 150  -  total flux cleaned = -0.000173441 Jy
! Component: 200  -  total flux cleaned = -0.000197935 Jy
! Component: 250  -  total flux cleaned = -0.000198449 Jy
! Component: 300  -  total flux cleaned = -0.000220972 Jy
! Component: 350  -  total flux cleaned = -0.000155126 Jy
! Component: 400  -  total flux cleaned = -6.98934e-05 Jy
! Component: 450  -  total flux cleaned = -7.51057e-06 Jy
! Component: 500  -  total flux cleaned = 7.35863e-05 Jy
! Component: 550  -  total flux cleaned = 7.38515e-05 Jy
! Component: 600  -  total flux cleaned = 9.34881e-05 Jy
! Component: 650  -  total flux cleaned = 9.34022e-05 Jy
! Component: 700  -  total flux cleaned = 7.47328e-05 Jy
! Component: 750  -  total flux cleaned = 0.000130444 Jy
! Component: 800  -  total flux cleaned = 0.000148318 Jy
! Component: 850  -  total flux cleaned = 0.000183411 Jy
! Component: 900  -  total flux cleaned = 0.000112985 Jy
! Component: 950  -  total flux cleaned = 0.000112964 Jy
! Component: 1000  -  total flux cleaned = 0.000130108 Jy
! Component: 1050  -  total flux cleaned = 9.58536e-05 Jy
! Component: 1100  -  total flux cleaned = 6.29778e-05 Jy
! Component: 1150  -  total flux cleaned = -2.5437e-06 Jy
! Component: 1200  -  total flux cleaned = -2.41423e-06 Jy
! Component: 1250  -  total flux cleaned = -3.44726e-05 Jy
! Component: 1300  -  total flux cleaned = -3.43138e-05 Jy
! Component: 1350  -  total flux cleaned = -5.02362e-05 Jy
! Component: 1400  -  total flux cleaned = -0.000126849 Jy
! Component: 1450  -  total flux cleaned = -0.000126738 Jy
! Component: 1500  -  total flux cleaned = -0.000156584 Jy
! Component: 1550  -  total flux cleaned = -0.000186014 Jy
! Component: 1600  -  total flux cleaned = -0.000229534 Jy
! Component: 1650  -  total flux cleaned = -0.000214865 Jy
! Component: 1700  -  total flux cleaned = -0.000214808 Jy
! Component: 1750  -  total flux cleaned = -0.000214789 Jy
! Component: 1800  -  total flux cleaned = -0.00021468 Jy
! Component: 1850  -  total flux cleaned = -0.000228362 Jy
! Component: 1900  -  total flux cleaned = -0.000282958 Jy
! Component: 1950  -  total flux cleaned = -0.000269506 Jy
! Component: 2000  -  total flux cleaned = -0.000322964 Jy
! Component: 2050  -  total flux cleaned = -0.000322923 Jy
! Component: 2100  -  total flux cleaned = -0.000322759 Jy
! Component: 2150  -  total flux cleaned = -0.000348698 Jy
! Component: 2200  -  total flux cleaned = -0.000399942 Jy
! Component: 2250  -  total flux cleaned = -0.000438242 Jy
! Component: 2300  -  total flux cleaned = -0.000413057 Jy
! Component: 2350  -  total flux cleaned = -0.000425563 Jy
! Component: 2400  -  total flux cleaned = -0.000487441 Jy
! Component: 2450  -  total flux cleaned = -0.000487293 Jy
! Component: 2500  -  total flux cleaned = -0.000535754 Jy
! Component: 2550  -  total flux cleaned = -0.0005116 Jy
! Component: 2600  -  total flux cleaned = -0.000511611 Jy
! Component: 2650  -  total flux cleaned = -0.000523236 Jy
! Component: 2700  -  total flux cleaned = -0.000523109 Jy
! Component: 2750  -  total flux cleaned = -0.000488441 Jy
! Component: 2800  -  total flux cleaned = -0.000523177 Jy
! Component: 2850  -  total flux cleaned = -0.000545941 Jy
! Component: 2900  -  total flux cleaned = -0.000545729 Jy
! Component: 2950  -  total flux cleaned = -0.00053452 Jy
! Component: 3000  -  total flux cleaned = -0.000567933 Jy
! Component: 3050  -  total flux cleaned = -0.000590069 Jy
! Component: 3100  -  total flux cleaned = -0.000622972 Jy
! Component: 3150  -  total flux cleaned = -0.000644634 Jy
! Component: 3200  -  total flux cleaned = -0.000644597 Jy
! Component: 3250  -  total flux cleaned = -0.000644698 Jy
! Component: 3300  -  total flux cleaned = -0.000676691 Jy
! Component: 3350  -  total flux cleaned = -0.000708257 Jy
! Component: 3400  -  total flux cleaned = -0.000729302 Jy
! Component: 3450  -  total flux cleaned = -0.000718975 Jy
! Component: 3500  -  total flux cleaned = -0.000760351 Jy
! Component: 3550  -  total flux cleaned = -0.000791069 Jy
! Component: 3600  -  total flux cleaned = -0.000831819 Jy
! Component: 3650  -  total flux cleaned = -0.000831641 Jy
! Component: 3700  -  total flux cleaned = -0.000821623 Jy
! Component: 3750  -  total flux cleaned = -0.000831657 Jy
! Component: 3800  -  total flux cleaned = -0.000861411 Jy
! Component: 3850  -  total flux cleaned = -0.000861391 Jy
! Component: 3900  -  total flux cleaned = -0.000871123 Jy
! Component: 3950  -  total flux cleaned = -0.000880894 Jy
! Component: 4000  -  total flux cleaned = -0.000919593 Jy
! Component: 4050  -  total flux cleaned = -0.000890766 Jy
! Total flux subtracted in 4096 components = -0.000900332 Jy
! Clean residual min=-0.000612 max=0.000562 Jy/beam
! Clean residual mean=-0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.201026 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 393 components and 0.201026 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1013+4918_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.589 x 5.653 at -19.86 degrees (North through East)
! Clean map  min=-0.0012396  max=0.13036 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1013+4918_S_map.fits
wmodel /vlbi/uf001/uva//J1013+4918_S_map.mod
! Writing 393 model components to file: /vlbi/uf001/uva//J1013+4918_S_map.mod
wobs   /vlbi/uf001/uva//J1013+4918_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1013+4918_S_uvs.fits
wwins  /vlbi/uf001/uva//J1013+4918_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1013+4918_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.130361 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000168185 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.387045 0.387045 0.77409 1.54818 3.09636 6.19272 12.3854 24.7709 49.5417 99.0835
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.13 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  775.104 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1013+4918_S_dfm.log closed on Mon Jan 14 00:48:00 2019