! Started logfile: /vlbi/uf001/uva//J1011-3223_S_dfm.log on Mon Jan 14 00:47:11 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1011-3223_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1011-3223_S_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1011-3223 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7884 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1011-3223_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012598Jy sigma=13.403575 ! Fit after self-cal, rms=0.896003Jy sigma=11.656276 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=6.647 mas, bpa=-4.773 degrees ! Estimated noise=1.04273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0897297 Jy ! Component: 100 - total flux cleaned = 0.109612 Jy ! Total flux subtracted in 100 components = 0.109612 Jy ! Clean residual min=-0.008715 max=0.013652 Jy/beam ! Clean residual mean=-0.000079 rms=0.002555 Jy/beam ! Combined flux in latest and established models = 0.109612 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.109612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107100Jy sigma=1.249602 ! Fit after self-cal, rms=0.106779Jy sigma=1.248111 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.477 mas, bpa=-4.358 degrees ! Estimated noise=0.625491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013503 Jy ! Component: 100 - total flux cleaned = 0.0205432 Jy ! Component: 150 - total flux cleaned = 0.0215223 Jy ! Component: 200 - total flux cleaned = 0.0218455 Jy ! Total flux subtracted in 200 components = 0.0218455 Jy ! Clean residual min=-0.007640 max=0.011936 Jy/beam ! Clean residual mean=-0.000104 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.131458 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.131458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105207Jy sigma=1.218073 ! Fit after self-cal, rms=0.105054Jy sigma=1.214749 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.775 x 7.477 at -4.358 degrees (North through East) ! Clean map min=-0.0068839 max=0.1104 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 HN 1.25 KP 0.92 LA 0.90 ! MK 0.95 NL 1.03 OV 0.87 PT 0.92 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.06 HN 1.20 KP 0.94 LA 0.91 ! MK 0.92 NL 1.05 OV 0.85 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 HN 1.27 KP 0.94 LA 0.94 ! MK 0.95 NL 1.03 OV 0.89 PT 0.98 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.105054Jy sigma=1.214749 ! Fit after self-cal, rms=0.136434Jy sigma=1.175169 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.403 mas, bpa=-4.346 degrees ! Estimated noise=0.619108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000789193 Jy ! Component: 100 - total flux cleaned = -0.00146589 Jy ! Component: 150 - total flux cleaned = -0.0017443 Jy ! Component: 200 - total flux cleaned = -0.00198606 Jy ! Total flux subtracted in 200 components = -0.00198606 Jy ! Clean residual min=-0.004863 max=0.003731 Jy/beam ! Clean residual mean=-0.000036 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.129472 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.129472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.136308Jy sigma=1.173524 ! Fit after self-cal, rms=0.137201Jy sigma=1.172205 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.137201Jy sigma=1.172205 ! Fit after self-cal, rms=0.145618Jy sigma=1.166521 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.394 mas, bpa=-4.482 degrees ! Estimated noise=0.623432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523882 Jy ! Component: 100 - total flux cleaned = -0.000745482 Jy ! Component: 150 - total flux cleaned = -0.000792444 Jy ! Component: 200 - total flux cleaned = -0.00087527 Jy ! Total flux subtracted in 200 components = -0.00087527 Jy ! Clean residual min=-0.003471 max=0.003079 Jy/beam ! Clean residual mean=-0.000015 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.128597 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.128597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.145554Jy sigma=1.165941 ! Fit after self-cal, rms=0.145711Jy sigma=1.165761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.89531e-05 Jy ! Component: 100 - total flux cleaned = -0.000190051 Jy ! Component: 150 - total flux cleaned = -0.00029805 Jy ! Component: 200 - total flux cleaned = -0.000363612 Jy ! Total flux subtracted in 200 components = -0.000363612 Jy ! Clean residual min=-0.003442 max=0.003086 Jy/beam ! Clean residual mean=-0.000017 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.128233 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.128233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.145668Jy sigma=1.165492 ! Fit after self-cal, rms=0.145679Jy sigma=1.165434 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.145679Jy sigma=1.165434 ! Fit after self-cal, rms=0.152533Jy sigma=1.164028 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.384 mas, bpa=-4.544 degrees ! Estimated noise=0.624354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000341778 Jy ! Component: 100 - total flux cleaned = -0.000419439 Jy ! Component: 150 - total flux cleaned = -0.000521588 Jy ! Component: 200 - total flux cleaned = -0.000552025 Jy ! Total flux subtracted in 200 components = -0.000552025 Jy ! Clean residual min=-0.002632 max=0.003091 Jy/beam ! Clean residual mean=0.000002 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.127681 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.127681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.152493Jy sigma=1.163797 ! Fit after self-cal, rms=0.152665Jy sigma=1.163696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.40154e-05 Jy ! Component: 100 - total flux cleaned = -8.12588e-05 Jy ! Component: 150 - total flux cleaned = -0.000134704 Jy ! Component: 200 - total flux cleaned = -0.000134626 Jy ! Total flux subtracted in 200 components = -0.000134626 Jy ! Clean residual min=-0.002665 max=0.002974 Jy/beam ! Clean residual mean=0.000002 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.127546 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.127546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.152637Jy sigma=1.163559 ! Fit after self-cal, rms=0.152643Jy sigma=1.163525 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.152643Jy sigma=1.163525 ! Fit after self-cal, rms=0.153679Jy sigma=1.163444 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.33 mas, bmaj=19.54 mas, bpa=-0.3098 degrees ! Estimated noise=0.860251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424521 Jy ! Component: 100 - total flux cleaned = 0.000462903 Jy ! Component: 150 - total flux cleaned = 0.000487571 Jy ! Component: 200 - total flux cleaned = 0.000559803 Jy ! Total flux subtracted in 200 components = 0.000559803 Jy ! Clean residual min=-0.002313 max=0.002839 Jy/beam ! Clean residual mean=0.000012 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.128106 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 0.128106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.153663Jy sigma=1.163665 ! Fit after self-cal, rms=0.153691Jy sigma=1.163583 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171563 Jy ! Component: 100 - total flux cleaned = 0.000219301 Jy ! Component: 150 - total flux cleaned = 0.000263348 Jy ! Component: 200 - total flux cleaned = 0.000325715 Jy ! Total flux subtracted in 200 components = 0.000325715 Jy ! Clean residual min=-0.002291 max=0.002784 Jy/beam ! Clean residual mean=0.000015 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.128432 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.128432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.153679Jy sigma=1.163745 ! Fit after self-cal, rms=0.153693Jy sigma=1.163723 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.38 mas, bpa=-4.515 degrees ! Estimated noise=0.623665 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.745 x 7.38 at -4.515 degrees (North through East) ! Clean map min=-0.0031561 max=0.10876 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.271 mas, bmaj=6.564 mas, bpa=-4.936 degrees ! Estimated noise=1.04218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0892486 Jy ! Component: 100 - total flux cleaned = 0.110542 Jy ! Component: 150 - total flux cleaned = 0.119967 Jy ! Component: 200 - total flux cleaned = 0.123943 Jy ! Total flux subtracted in 200 components = 0.123943 Jy ! Clean residual min=-0.004749 max=0.004287 Jy/beam ! Clean residual mean=-0.000002 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.123943 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.123943 Jy ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.38 mas, bpa=-4.515 degrees ! Estimated noise=0.623665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269721 Jy ! Component: 100 - total flux cleaned = 0.00269614 Jy ! Component: 150 - total flux cleaned = 0.00260965 Jy ! Component: 200 - total flux cleaned = 0.00253475 Jy ! Total flux subtracted in 200 components = 0.00253475 Jy ! Clean residual min=-0.003043 max=0.002951 Jy/beam ! Clean residual mean=-0.000001 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.126477 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.126477 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.33 mas, bmaj=19.54 mas, bpa=-0.3098 degrees ! Estimated noise=0.860251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105873 Jy ! Component: 100 - total flux cleaned = 0.00119395 Jy ! Component: 150 - total flux cleaned = 0.00128269 Jy ! Component: 200 - total flux cleaned = 0.00135975 Jy ! Total flux subtracted in 200 components = 0.00135975 Jy ! Clean residual min=-0.002253 max=0.002662 Jy/beam ! Clean residual mean=0.000009 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.127837 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.96224e-05 Jy ! Component: 100 - total flux cleaned = 9.09155e-05 Jy ! Component: 150 - total flux cleaned = 0.000128044 Jy ! Component: 200 - total flux cleaned = 0.000145792 Jy ! Total flux subtracted in 200 components = 0.000145792 Jy ! Clean residual min=-0.002245 max=0.002690 Jy/beam ! Clean residual mean=0.000010 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.127983 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.127983 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=7.38 mas, bpa=-4.515 degrees ! Estimated noise=0.623665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113988 Jy ! Component: 100 - total flux cleaned = -0.00132383 Jy ! Component: 150 - total flux cleaned = -0.0013778 Jy ! Component: 200 - total flux cleaned = -0.00142229 Jy ! Total flux subtracted in 200 components = -0.00142229 Jy ! Clean residual min=-0.002709 max=0.002819 Jy/beam ! Clean residual mean=-0.000000 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.126561 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.126561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.153766Jy sigma=1.163739 ! Fit after self-cal, rms=0.153737Jy sigma=1.163612 wmodel J1011-3223_S_map.mod ! Writing 71 model components to file: J1011-3223_S_map.mod wobs J1011-3223_S_uvs.fits ! Writing UV FITS file: J1011-3223_S_uvs.fits wwins J1011-3223_S_map.win ! wwins: Wrote 2 windows to J1011-3223_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212232 Jy ! Component: 100 - total flux cleaned = 0.000263849 Jy ! Component: 150 - total flux cleaned = 0.000400385 Jy ! Component: 200 - total flux cleaned = 0.000315126 Jy ! Component: 250 - total flux cleaned = 2.45819e-05 Jy ! Component: 300 - total flux cleaned = -0.000216716 Jy ! Component: 350 - total flux cleaned = -0.000372767 Jy ! Component: 400 - total flux cleaned = -0.000598854 Jy ! Component: 450 - total flux cleaned = -0.000708191 Jy ! Component: 500 - total flux cleaned = -0.000850453 Jy ! Component: 550 - total flux cleaned = -0.000920448 Jy ! Component: 600 - total flux cleaned = -0.00112504 Jy ! Component: 650 - total flux cleaned = -0.00115847 Jy ! Component: 700 - total flux cleaned = -0.00125597 Jy ! Component: 750 - total flux cleaned = -0.00132014 Jy ! Component: 800 - total flux cleaned = -0.00132045 Jy ! Component: 850 - total flux cleaned = -0.0013512 Jy ! Component: 900 - total flux cleaned = -0.00138088 Jy ! Component: 950 - total flux cleaned = -0.00135106 Jy ! Component: 1000 - total flux cleaned = -0.00140923 Jy ! Component: 1050 - total flux cleaned = -0.00138064 Jy ! Component: 1100 - total flux cleaned = -0.00149313 Jy ! Component: 1150 - total flux cleaned = -0.00143774 Jy ! Component: 1200 - total flux cleaned = -0.00141106 Jy ! Component: 1250 - total flux cleaned = -0.00146497 Jy ! Component: 1300 - total flux cleaned = -0.00143817 Jy ! Component: 1350 - total flux cleaned = -0.00138568 Jy ! Component: 1400 - total flux cleaned = -0.0013078 Jy ! Component: 1450 - total flux cleaned = -0.00125685 Jy ! Component: 1500 - total flux cleaned = -0.0011562 Jy ! Component: 1550 - total flux cleaned = -0.0010819 Jy ! Component: 1600 - total flux cleaned = -0.00105742 Jy ! Component: 1650 - total flux cleaned = -0.0010328 Jy ! Component: 1700 - total flux cleaned = -0.00096034 Jy ! Component: 1750 - total flux cleaned = -0.000865694 Jy ! Component: 1800 - total flux cleaned = -0.000889661 Jy ! Component: 1850 - total flux cleaned = -0.000797271 Jy ! Component: 1900 - total flux cleaned = -0.000865933 Jy ! Component: 1950 - total flux cleaned = -0.000775199 Jy ! Component: 2000 - total flux cleaned = -0.000775422 Jy ! Component: 2050 - total flux cleaned = -0.000686531 Jy ! Component: 2100 - total flux cleaned = -0.000664616 Jy ! Component: 2150 - total flux cleaned = -0.000664657 Jy ! Component: 2200 - total flux cleaned = -0.000578305 Jy ! Component: 2250 - total flux cleaned = -0.000578154 Jy ! Component: 2300 - total flux cleaned = -0.00047212 Jy ! Component: 2350 - total flux cleaned = -0.000451269 Jy ! Component: 2400 - total flux cleaned = -0.000492942 Jy ! Component: 2450 - total flux cleaned = -0.000348511 Jy ! Component: 2500 - total flux cleaned = -0.000328368 Jy ! Component: 2550 - total flux cleaned = -0.000267748 Jy ! Component: 2600 - total flux cleaned = -0.000227859 Jy ! Component: 2650 - total flux cleaned = -0.000188181 Jy ! Component: 2700 - total flux cleaned = -0.000168374 Jy ! Component: 2750 - total flux cleaned = -5.08158e-05 Jy ! Component: 2800 - total flux cleaned = 2.68514e-05 Jy ! Component: 2850 - total flux cleaned = 8.4532e-05 Jy ! Component: 2900 - total flux cleaned = 8.45012e-05 Jy ! Component: 2950 - total flux cleaned = 0.000160514 Jy ! Component: 3000 - total flux cleaned = 0.000217037 Jy ! Component: 3050 - total flux cleaned = 0.000273029 Jy ! Component: 3100 - total flux cleaned = 0.000291568 Jy ! Component: 3150 - total flux cleaned = 0.000383583 Jy ! Component: 3200 - total flux cleaned = 0.000475005 Jy ! Component: 3250 - total flux cleaned = 0.000474922 Jy ! Component: 3300 - total flux cleaned = 0.000510936 Jy ! Component: 3350 - total flux cleaned = 0.00058245 Jy ! Component: 3400 - total flux cleaned = 0.000653384 Jy ! Component: 3450 - total flux cleaned = 0.000706128 Jy ! Component: 3500 - total flux cleaned = 0.000723464 Jy ! Component: 3550 - total flux cleaned = 0.000758208 Jy ! Component: 3600 - total flux cleaned = 0.000844128 Jy ! Component: 3650 - total flux cleaned = 0.000912306 Jy ! Component: 3700 - total flux cleaned = 0.000946212 Jy ! Component: 3750 - total flux cleaned = 0.000929134 Jy ! Component: 3800 - total flux cleaned = 0.000962638 Jy ! Component: 3850 - total flux cleaned = 0.00102937 Jy ! Component: 3900 - total flux cleaned = 0.00102928 Jy ! Component: 3950 - total flux cleaned = 0.00102939 Jy ! Component: 4000 - total flux cleaned = 0.0010786 Jy ! Component: 4050 - total flux cleaned = 0.00106233 Jy ! Total flux subtracted in 4096 components = 0.00112704 Jy ! Clean residual min=-0.001189 max=0.000972 Jy/beam ! Clean residual mean=0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.127688 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 371 components and 0.127688 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1011-3223_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.745 x 7.38 at -4.515 degrees (North through East) ! Clean map min=-0.0019819 max=0.10859 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1011-3223_S_map.fits wmodel /vlbi/uf001/uva//J1011-3223_S_map.mod ! Writing 371 model components to file: /vlbi/uf001/uva//J1011-3223_S_map.mod wobs /vlbi/uf001/uva//J1011-3223_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1011-3223_S_uvs.fits wwins /vlbi/uf001/uva//J1011-3223_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1011-3223_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.108586 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292182 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.807237 0.807237 1.61447 3.22895 6.4579 12.9158 25.8316 51.6632 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.108 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 371.637 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1011-3223_S_dfm.log closed on Mon Jan 14 00:47:16 2019