! Started logfile: /vlbi/uf001/uva//J1010-0200_S_dfm.log on Mon Jan 14 00:46:15 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1010-0200_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1010-0200_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.957143 visibilities/baseline/integration-bin.
! Found source: J1010-0200
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5427 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1010-0200_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.089561Jy  sigma=19.775101
! Fit after  self-cal, rms=0.675936Jy  sigma=12.260271
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.697 mas, bmaj=6.852 mas, bpa=-2.064 degrees
! Estimated noise=0.766221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.27202 Jy
! Component: 100  -  total flux cleaned = 0.381832 Jy
! Total flux subtracted in 100 components = 0.381832 Jy
! Clean residual min=-0.019818 max=0.048741 Jy/beam
! Clean residual mean=0.000020 rms=0.005114 Jy/beam
! Combined flux in latest and established models = 0.381832 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.381832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125233Jy  sigma=2.235088
! Fit after  self-cal, rms=0.124606Jy  sigma=2.225606
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0537063 Jy
! Component: 100  -  total flux cleaned = 0.0816576 Jy
! Total flux subtracted in 100 components = 0.0816576 Jy
! Clean residual min=-0.013067 max=0.021292 Jy/beam
! Clean residual mean=0.000010 rms=0.003265 Jy/beam
! Combined flux in latest and established models = 0.463489 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.463489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094279Jy  sigma=1.657679
! Fit after  self-cal, rms=0.094019Jy  sigma=1.653643
! Inverting map 
! Added new window around map position (-1.5, 9.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211727 Jy
! Component: 100  -  total flux cleaned = 0.0345691 Jy
! Total flux subtracted in 100 components = 0.0345691 Jy
! Clean residual min=-0.011506 max=0.016311 Jy/beam
! Clean residual mean=0.000011 rms=0.002849 Jy/beam
! Combined flux in latest and established models = 0.498058 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.498058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086951Jy  sigma=1.526567
! Fit after  self-cal, rms=0.086709Jy  sigma=1.521761
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.231 mas, bmaj=7.61 mas, bpa=-1.618 degrees
! Estimated noise=0.581223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.5, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199795 Jy
! Component: 100  -  total flux cleaned = 0.0323149 Jy
! Component: 150  -  total flux cleaned = 0.0416417 Jy
! Component: 200  -  total flux cleaned = 0.0488796 Jy
! Total flux subtracted in 200 components = 0.0488796 Jy
! Clean residual min=-0.010348 max=0.012123 Jy/beam
! Clean residual mean=0.000013 rms=0.002528 Jy/beam
! Combined flux in latest and established models = 0.546938 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 69 components and 0.546938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081109Jy  sigma=1.418874
! Fit after  self-cal, rms=0.080699Jy  sigma=1.411242
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.231 x 7.61 at -1.618 degrees (North through East)
! Clean map  min=-0.008982  max=0.30545 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.92     HN        0.96     KP        1.01     
!   LA        0.97     MK        0.99     NL        1.09     OV        0.97     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.36     FD        0.93     HN        1.00     KP        1.01     
!   LA        0.96     MK        1.01     NL        1.04     OV        0.93     
!   PT        0.99     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.94     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.09     NL        1.04     OV        0.99     
!   PT        0.99     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.080699Jy  sigma=1.411242
! Fit after  self-cal, rms=0.077736Jy  sigma=1.307473
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.219 mas, bmaj=7.636 mas, bpa=-0.7759 degrees
! Estimated noise=0.577058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (59.5, -94.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668423 Jy
! Component: 100  -  total flux cleaned = 0.00672126 Jy
! Component: 150  -  total flux cleaned = 0.00671707 Jy
! Component: 200  -  total flux cleaned = 0.00637647 Jy
! Total flux subtracted in 200 components = 0.00637647 Jy
! Clean residual min=-0.008217 max=0.007411 Jy/beam
! Clean residual mean=-0.000013 rms=0.001712 Jy/beam
! Combined flux in latest and established models = 0.553314 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.553315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076316Jy  sigma=1.283261
! Fit after  self-cal, rms=0.076275Jy  sigma=1.281248
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076275Jy  sigma=1.281248
! Fit after  self-cal, rms=0.075737Jy  sigma=1.202430
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.218 mas, bmaj=7.646 mas, bpa=-0.7676 degrees
! Estimated noise=0.580652 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00049578 Jy
! Component: 100  -  total flux cleaned = -0.00106543 Jy
! Component: 150  -  total flux cleaned = -0.00143926 Jy
! Component: 200  -  total flux cleaned = -0.00175903 Jy
! Total flux subtracted in 200 components = -0.00175903 Jy
! Clean residual min=-0.005863 max=0.004419 Jy/beam
! Clean residual mean=-0.000007 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.551555 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 107 components and 0.551555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075332Jy  sigma=1.193223
! Fit after  self-cal, rms=0.075362Jy  sigma=1.192614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000498505 Jy
! Component: 100  -  total flux cleaned = -0.000870241 Jy
! Component: 150  -  total flux cleaned = -0.00112431 Jy
! Component: 200  -  total flux cleaned = -0.00165974 Jy
! Total flux subtracted in 200 components = -0.00165974 Jy
! Clean residual min=-0.005706 max=0.004283 Jy/beam
! Clean residual mean=-0.000006 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.549896 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 117 components and 0.549896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075162Jy  sigma=1.188412
! Fit after  self-cal, rms=0.075142Jy  sigma=1.187941
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075142Jy  sigma=1.187941
! Fit after  self-cal, rms=0.075781Jy  sigma=1.184003
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.207 mas, bmaj=7.631 mas, bpa=-0.5989 degrees
! Estimated noise=0.57863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0010662 Jy
! Component: 100  -  total flux cleaned = -0.00174055 Jy
! Component: 150  -  total flux cleaned = -0.00223822 Jy
! Component: 200  -  total flux cleaned = -0.00260563 Jy
! Total flux subtracted in 200 components = -0.00260563 Jy
! Clean residual min=-0.005121 max=0.003765 Jy/beam
! Clean residual mean=-0.000005 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.54729 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 126 components and 0.54729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075579Jy  sigma=1.179689
! Fit after  self-cal, rms=0.075573Jy  sigma=1.179285
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000409031 Jy
! Component: 100  -  total flux cleaned = -0.000760595 Jy
! Component: 150  -  total flux cleaned = -0.000888476 Jy
! Component: 200  -  total flux cleaned = -0.00113049 Jy
! Total flux subtracted in 200 components = -0.00113049 Jy
! Clean residual min=-0.004879 max=0.003699 Jy/beam
! Clean residual mean=-0.000005 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.54616 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 135 components and 0.546159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075447Jy  sigma=1.176839
! Fit after  self-cal, rms=0.075436Jy  sigma=1.176520
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075436Jy  sigma=1.176520
! Fit after  self-cal, rms=0.075764Jy  sigma=1.175946
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.292 mas, bmaj=12.09 mas, bpa=-1.104 degrees
! Estimated noise=0.759384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144184 Jy
! Component: 100  -  total flux cleaned = -0.00181439 Jy
! Component: 150  -  total flux cleaned = -0.00200073 Jy
! Component: 200  -  total flux cleaned = -0.00216521 Jy
! Total flux subtracted in 200 components = -0.00216521 Jy
! Clean residual min=-0.003798 max=0.003681 Jy/beam
! Clean residual mean=-0.000010 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.543994 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 158 components and 0.543994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075654Jy  sigma=1.174651
! Fit after  self-cal, rms=0.075645Jy  sigma=1.174232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000177812 Jy
! Component: 100  -  total flux cleaned = -0.000336524 Jy
! Component: 150  -  total flux cleaned = -0.000477772 Jy
! Component: 200  -  total flux cleaned = -0.000519123 Jy
! Total flux subtracted in 200 components = -0.000519123 Jy
! Clean residual min=-0.003752 max=0.003629 Jy/beam
! Clean residual mean=-0.000010 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.543475 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 174 components and 0.543475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075586Jy  sigma=1.173578
! Fit after  self-cal, rms=0.075574Jy  sigma=1.173243
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=7.623 mas, bpa=-0.5116 degrees
! Estimated noise=0.577228 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.2 x 7.623 at -0.5116 degrees (North through East)
! Clean map  min=-0.0042157  max=0.30322 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.669 mas, bmaj=6.881 mas, bpa=-1.062 degrees
! Estimated noise=0.759204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.274489 Jy
! Component: 100  -  total flux cleaned = 0.382237 Jy
! Component: 150  -  total flux cleaned = 0.432454 Jy
! Component: 200  -  total flux cleaned = 0.459583 Jy
! Total flux subtracted in 200 components = 0.459583 Jy
! Clean residual min=-0.010474 max=0.014307 Jy/beam
! Clean residual mean=-0.000006 rms=0.002171 Jy/beam
! Combined flux in latest and established models = 0.459583 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.459583 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=7.623 mas, bpa=-0.5116 degrees
! Estimated noise=0.577228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230013 Jy
! Component: 100  -  total flux cleaned = 0.0385154 Jy
! Component: 150  -  total flux cleaned = 0.0495944 Jy
! Component: 200  -  total flux cleaned = 0.0579051 Jy
! Total flux subtracted in 200 components = 0.0579051 Jy
! Clean residual min=-0.004837 max=0.007339 Jy/beam
! Clean residual mean=-0.000004 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.517488 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 73 components and 0.517488 Jy
! Inverting map 
! Added new window around map position (-5.5, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00730794 Jy
! Component: 100  -  total flux cleaned = 0.0114148 Jy
! Component: 150  -  total flux cleaned = 0.0135704 Jy
! Component: 200  -  total flux cleaned = 0.0155637 Jy
! Total flux subtracted in 200 components = 0.0155637 Jy
! Clean residual min=-0.004371 max=0.003991 Jy/beam
! Clean residual mean=-0.000006 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.533052 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 100 components and 0.533052 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.292 mas, bmaj=12.09 mas, bpa=-1.104 degrees
! Estimated noise=0.759384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00388298 Jy
! Component: 100  -  total flux cleaned = 0.00507839 Jy
! Component: 150  -  total flux cleaned = 0.00535202 Jy
! Component: 200  -  total flux cleaned = 0.00566498 Jy
! Total flux subtracted in 200 components = 0.00566498 Jy
! Clean residual min=-0.003951 max=0.003482 Jy/beam
! Clean residual mean=-0.000011 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 0.538717 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402422 Jy
! Component: 100  -  total flux cleaned = 0.000690159 Jy
! Component: 150  -  total flux cleaned = 0.00104491 Jy
! Component: 200  -  total flux cleaned = 0.00127566 Jy
! Total flux subtracted in 200 components = 0.00127566 Jy
! Clean residual min=-0.003781 max=0.003559 Jy/beam
! Clean residual mean=-0.000010 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.539992 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 151 components and 0.539992 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=7.623 mas, bpa=-0.5116 degrees
! Estimated noise=0.577228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000403769 Jy
! Component: 100  -  total flux cleaned = -0.000229302 Jy
! Component: 150  -  total flux cleaned = 8.35966e-05 Jy
! Component: 200  -  total flux cleaned = 0.000294591 Jy
! Total flux subtracted in 200 components = 0.000294591 Jy
! Clean residual min=-0.003838 max=0.003402 Jy/beam
! Clean residual mean=-0.000005 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.540287 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 169 components and 0.540287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075542Jy  sigma=1.170301
! Fit after  self-cal, rms=0.075437Jy  sigma=1.167945
wmodel J1010-0200_S_map.mod
! Writing 169 model components to file: J1010-0200_S_map.mod
wobs   J1010-0200_S_uvs.fits
! Writing UV FITS file: J1010-0200_S_uvs.fits
wwins  J1010-0200_S_map.win
! wwins: Wrote 5 windows to J1010-0200_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00172935 Jy
! Component: 100  -  total flux cleaned = -0.00228552 Jy
! Component: 150  -  total flux cleaned = -0.00251969 Jy
! Component: 200  -  total flux cleaned = -0.00274467 Jy
! Component: 250  -  total flux cleaned = -0.00290795 Jy
! Component: 300  -  total flux cleaned = -0.00301189 Jy
! Component: 350  -  total flux cleaned = -0.00301296 Jy
! Component: 400  -  total flux cleaned = -0.00311198 Jy
! Component: 450  -  total flux cleaned = -0.0030639 Jy
! Component: 500  -  total flux cleaned = -0.00306337 Jy
! Component: 550  -  total flux cleaned = -0.00301867 Jy
! Component: 600  -  total flux cleaned = -0.00306368 Jy
! Component: 650  -  total flux cleaned = -0.00314967 Jy
! Component: 700  -  total flux cleaned = -0.00314911 Jy
! Component: 750  -  total flux cleaned = -0.00314857 Jy
! Component: 800  -  total flux cleaned = -0.00318829 Jy
! Component: 850  -  total flux cleaned = -0.00310692 Jy
! Component: 900  -  total flux cleaned = -0.00306683 Jy
! Component: 950  -  total flux cleaned = -0.00310617 Jy
! Component: 1000  -  total flux cleaned = -0.00299096 Jy
! Component: 1050  -  total flux cleaned = -0.00302875 Jy
! Component: 1100  -  total flux cleaned = -0.00306644 Jy
! Component: 1150  -  total flux cleaned = -0.00310372 Jy
! Component: 1200  -  total flux cleaned = -0.00317603 Jy
! Component: 1250  -  total flux cleaned = -0.00338975 Jy
! Component: 1300  -  total flux cleaned = -0.0034239 Jy
! Component: 1350  -  total flux cleaned = -0.00356156 Jy
! Component: 1400  -  total flux cleaned = -0.00362944 Jy
! Component: 1450  -  total flux cleaned = -0.00366281 Jy
! Component: 1500  -  total flux cleaned = -0.0036959 Jy
! Component: 1550  -  total flux cleaned = -0.00379532 Jy
! Component: 1600  -  total flux cleaned = -0.00386037 Jy
! Component: 1650  -  total flux cleaned = -0.0041162 Jy
! Component: 1700  -  total flux cleaned = -0.00417923 Jy
! Component: 1750  -  total flux cleaned = -0.00405427 Jy
! Component: 1800  -  total flux cleaned = -0.00424023 Jy
! Component: 1850  -  total flux cleaned = -0.00420925 Jy
! Component: 1900  -  total flux cleaned = -0.0041491 Jy
! Component: 1950  -  total flux cleaned = -0.00420911 Jy
! Component: 2000  -  total flux cleaned = -0.00412051 Jy
! Component: 2050  -  total flux cleaned = -0.0042372 Jy
! Component: 2100  -  total flux cleaned = -0.00406341 Jy
! Component: 2150  -  total flux cleaned = -0.0040918 Jy
! Component: 2200  -  total flux cleaned = -0.00406365 Jy
! Component: 2250  -  total flux cleaned = -0.00403576 Jy
! Component: 2300  -  total flux cleaned = -0.00403586 Jy
! Component: 2350  -  total flux cleaned = -0.00406326 Jy
! Component: 2400  -  total flux cleaned = -0.0039813 Jy
! Component: 2450  -  total flux cleaned = -0.00390041 Jy
! Component: 2500  -  total flux cleaned = -0.00390007 Jy
! Component: 2550  -  total flux cleaned = -0.00392673 Jy
! Component: 2600  -  total flux cleaned = -0.0038484 Jy
! Component: 2650  -  total flux cleaned = -0.00387412 Jy
! Component: 2700  -  total flux cleaned = -0.00384839 Jy
! Component: 2750  -  total flux cleaned = -0.00372103 Jy
! Component: 2800  -  total flux cleaned = -0.00374623 Jy
! Component: 2850  -  total flux cleaned = -0.00364624 Jy
! Component: 2900  -  total flux cleaned = -0.00372089 Jy
! Component: 2950  -  total flux cleaned = -0.00374537 Jy
! Component: 3000  -  total flux cleaned = -0.00364772 Jy
! Component: 3050  -  total flux cleaned = -0.00372036 Jy
! Component: 3100  -  total flux cleaned = -0.00362451 Jy
! Component: 3150  -  total flux cleaned = -0.00362441 Jy
! Component: 3200  -  total flux cleaned = -0.00345982 Jy
! Component: 3250  -  total flux cleaned = -0.00343673 Jy
! Component: 3300  -  total flux cleaned = -0.00346021 Jy
! Component: 3350  -  total flux cleaned = -0.00348319 Jy
! Component: 3400  -  total flux cleaned = -0.00343768 Jy
! Component: 3450  -  total flux cleaned = -0.00346029 Jy
! Component: 3500  -  total flux cleaned = -0.00339281 Jy
! Component: 3550  -  total flux cleaned = -0.00339298 Jy
! Component: 3600  -  total flux cleaned = -0.00341499 Jy
! Component: 3650  -  total flux cleaned = -0.00337089 Jy
! Component: 3700  -  total flux cleaned = -0.00343648 Jy
! Component: 3750  -  total flux cleaned = -0.0033285 Jy
! Component: 3800  -  total flux cleaned = -0.00335003 Jy
! Component: 3850  -  total flux cleaned = -0.0034137 Jy
! Component: 3900  -  total flux cleaned = -0.00322357 Jy
! Component: 3950  -  total flux cleaned = -0.00328666 Jy
! Component: 4000  -  total flux cleaned = -0.00324533 Jy
! Component: 4050  -  total flux cleaned = -0.00326581 Jy
! Total flux subtracted in 4096 components = -0.00326601 Jy
! Clean residual min=-0.001104 max=0.001174 Jy/beam
! Clean residual mean=-0.000002 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.537021 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 438 components and 0.537021 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1010-0200_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.2 x 7.623 at -0.5116 degrees (North through East)
! Clean map  min=-0.0032593  max=0.30691 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1010-0200_S_map.fits
wmodel /vlbi/uf001/uva//J1010-0200_S_map.mod
! Writing 438 model components to file: /vlbi/uf001/uva//J1010-0200_S_map.mod
wobs   /vlbi/uf001/uva//J1010-0200_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1010-0200_S_uvs.fits
wwins  /vlbi/uf001/uva//J1010-0200_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1010-0200_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.306909 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000377313 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.368819 0.368819 0.737638 1.47528 2.95055 5.9011 11.8022 23.6044 47.2088 94.4176
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.306 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  813.407 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1010-0200_S_dfm.log closed on Mon Jan 14 00:46:19 2019