! Started logfile: /vlbi/uf001/uva//J1008-1629_S_b_dfm.log on Mon Jan 14 00:45:09 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J1008-1629_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1008-1629_S_b_uva.fits ! AN table 1: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J1008-1629 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4263 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1008-1629_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006951Jy sigma=17.343514 ! Fit after self-cal, rms=0.924630Jy sigma=15.898287 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=16.94 mas, bpa=-13.54 degrees ! Estimated noise=1.05595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592123 Jy ! Component: 100 - total flux cleaned = 0.0739374 Jy ! Total flux subtracted in 100 components = 0.0739374 Jy ! Clean residual min=-0.007300 max=0.010703 Jy/beam ! Clean residual mean=-0.000081 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 0.0739374 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0739374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087122Jy sigma=1.366625 ! Fit after self-cal, rms=0.086848Jy sigma=1.361812 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.692 mas, bmaj=17.34 mas, bpa=-13.07 degrees ! Estimated noise=0.657507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114866 Jy ! Component: 100 - total flux cleaned = 0.018686 Jy ! Component: 150 - total flux cleaned = 0.0237133 Jy ! Component: 200 - total flux cleaned = 0.0272505 Jy ! Total flux subtracted in 200 components = 0.0272505 Jy ! Clean residual min=-0.006861 max=0.012526 Jy/beam ! Clean residual mean=-0.000056 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.101188 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 0.101188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085323Jy sigma=1.325478 ! Fit after self-cal, rms=0.085257Jy sigma=1.323986 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.692 x 17.34 at -13.07 degrees (North through East) ! Clean map min=-0.0067341 max=0.077223 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 0.99 KP 1.28 ! LA 0.78 MK 1.03 NL 1.47 PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.03 KP 1.14 ! LA 0.89 MK 1.00 NL 0.75 PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.00 KP 1.35 ! LA 0.83 MK 1.10 NL 1.13 PT 0.99 ! ! ! Fit before self-cal, rms=0.085257Jy sigma=1.323986 ! Fit after self-cal, rms=0.086311Jy sigma=1.290897 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=17.42 mas, bpa=-12.96 degrees ! Estimated noise=0.648112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553494 Jy ! Component: 100 - total flux cleaned = 0.00115346 Jy ! Component: 150 - total flux cleaned = 0.0015108 Jy ! Component: 200 - total flux cleaned = 0.00160216 Jy ! Total flux subtracted in 200 components = 0.00160216 Jy ! Clean residual min=-0.006496 max=0.008834 Jy/beam ! Clean residual mean=-0.000035 rms=0.001828 Jy/beam ! Combined flux in latest and established models = 0.10279 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.10279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086243Jy sigma=1.289425 ! Fit after self-cal, rms=0.086812Jy sigma=1.286510 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086812Jy sigma=1.286510 ! Fit after self-cal, rms=0.089111Jy sigma=1.275586 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=18.08 mas, bpa=-13.08 degrees ! Estimated noise=0.653566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378939 Jy ! Component: 100 - total flux cleaned = -0.000380401 Jy ! Component: 150 - total flux cleaned = -0.000345948 Jy ! Component: 200 - total flux cleaned = -0.000284116 Jy ! Total flux subtracted in 200 components = -0.000284116 Jy ! Clean residual min=-0.005332 max=0.006681 Jy/beam ! Clean residual mean=-0.000016 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.102506 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 0.102506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089055Jy sigma=1.275334 ! Fit after self-cal, rms=0.089148Jy sigma=1.274302 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.68725e-05 Jy ! Component: 100 - total flux cleaned = 0.000150066 Jy ! Component: 150 - total flux cleaned = 0.00017799 Jy ! Component: 200 - total flux cleaned = 0.000207886 Jy ! Total flux subtracted in 200 components = 0.000207886 Jy ! Clean residual min=-0.005450 max=0.006543 Jy/beam ! Clean residual mean=-0.000017 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.102714 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.102714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089117Jy sigma=1.274056 ! Fit after self-cal, rms=0.089118Jy sigma=1.274004 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089118Jy sigma=1.274004 ! Fit after self-cal, rms=0.088743Jy sigma=1.273799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=18.02 mas, bpa=-13.05 degrees ! Estimated noise=0.650922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500719 Jy ! Component: 100 - total flux cleaned = -0.000503685 Jy ! Component: 150 - total flux cleaned = -0.000503617 Jy ! Component: 200 - total flux cleaned = -0.000477462 Jy ! Total flux subtracted in 200 components = -0.000477462 Jy ! Clean residual min=-0.005347 max=0.006417 Jy/beam ! Clean residual mean=-0.000017 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.102236 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.102236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088702Jy sigma=1.273702 ! Fit after self-cal, rms=0.088711Jy sigma=1.273645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.5259e-05 Jy ! Component: 100 - total flux cleaned = -2.72415e-05 Jy ! Component: 150 - total flux cleaned = 2.31894e-05 Jy ! Component: 200 - total flux cleaned = 4.78841e-05 Jy ! Total flux subtracted in 200 components = 4.78841e-05 Jy ! Clean residual min=-0.005383 max=0.006391 Jy/beam ! Clean residual mean=-0.000017 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.102284 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 114 components and 0.102284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088687Jy sigma=1.273514 ! Fit after self-cal, rms=0.088702Jy sigma=1.273486 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088702Jy sigma=1.273486 ! Fit after self-cal, rms=0.088124Jy sigma=1.273399 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.47 mas, bmaj=19.37 mas, bpa=-7.223 degrees ! Estimated noise=0.739533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178833 Jy ! Component: 100 - total flux cleaned = 4.51975e-05 Jy ! Component: 150 - total flux cleaned = 0.000123992 Jy ! Component: 200 - total flux cleaned = 0.000194274 Jy ! Total flux subtracted in 200 components = 0.000194274 Jy ! Clean residual min=-0.005779 max=0.008090 Jy/beam ! Clean residual mean=-0.000025 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.102478 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 0.102478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088090Jy sigma=1.273621 ! Fit after self-cal, rms=0.088059Jy sigma=1.273510 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120344 Jy ! Component: 100 - total flux cleaned = -4.30766e-05 Jy ! Component: 150 - total flux cleaned = 4.79871e-05 Jy ! Component: 200 - total flux cleaned = 8.89673e-05 Jy ! Total flux subtracted in 200 components = 8.89673e-05 Jy ! Clean residual min=-0.005742 max=0.008129 Jy/beam ! Clean residual mean=-0.000025 rms=0.002038 Jy/beam ! Combined flux in latest and established models = 0.102567 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 0.102567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088047Jy sigma=1.273704 ! Fit after self-cal, rms=0.088033Jy sigma=1.273620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=17.93 mas, bpa=-13.02 degrees ! Estimated noise=0.648132 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 17.93 at -13.02 degrees (North through East) ! Clean map min=-0.0051724 max=0.076632 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=17.5 mas, bpa=-13.42 degrees ! Estimated noise=1.06886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594176 Jy ! Component: 100 - total flux cleaned = 0.0739013 Jy ! Component: 150 - total flux cleaned = 0.0816695 Jy ! Component: 200 - total flux cleaned = 0.0871749 Jy ! Total flux subtracted in 200 components = 0.0871749 Jy ! Clean residual min=-0.006644 max=0.006558 Jy/beam ! Clean residual mean=-0.000042 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.0871749 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0871749 Jy ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=17.93 mas, bpa=-13.02 degrees ! Estimated noise=0.648132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572067 Jy ! Component: 100 - total flux cleaned = 0.00944084 Jy ! Component: 150 - total flux cleaned = 0.011277 Jy ! Component: 200 - total flux cleaned = 0.0122126 Jy ! Total flux subtracted in 200 components = 0.0122126 Jy ! Clean residual min=-0.005519 max=0.006836 Jy/beam ! Clean residual mean=-0.000028 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.0993875 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.0993875 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.47 mas, bmaj=19.37 mas, bpa=-7.223 degrees ! Estimated noise=0.739533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024689 Jy ! Component: 100 - total flux cleaned = 0.00305828 Jy ! Component: 150 - total flux cleaned = 0.0034281 Jy ! Component: 200 - total flux cleaned = 0.00372719 Jy ! Total flux subtracted in 200 components = 0.00372719 Jy ! Clean residual min=-0.005708 max=0.008321 Jy/beam ! Clean residual mean=-0.000024 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 0.103115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.24083e-05 Jy ! Component: 100 - total flux cleaned = 6.36829e-05 Jy ! Component: 150 - total flux cleaned = 9.26943e-05 Jy ! Component: 200 - total flux cleaned = 9.20306e-05 Jy ! Total flux subtracted in 200 components = 9.20306e-05 Jy ! Clean residual min=-0.005691 max=0.008328 Jy/beam ! Clean residual mean=-0.000024 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 0.103207 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.103207 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=17.93 mas, bpa=-13.02 degrees ! Estimated noise=0.648132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000675998 Jy ! Component: 100 - total flux cleaned = -0.000731671 Jy ! Component: 150 - total flux cleaned = -0.000644897 Jy ! Component: 200 - total flux cleaned = -0.000681928 Jy ! Total flux subtracted in 200 components = -0.000681928 Jy ! Clean residual min=-0.005439 max=0.006633 Jy/beam ! Clean residual mean=-0.000016 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.102525 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.102525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088054Jy sigma=1.273954 ! Fit after self-cal, rms=0.088027Jy sigma=1.273710 wmodel J1008-1629_S_b_map.mod ! Writing 77 model components to file: J1008-1629_S_b_map.mod wobs J1008-1629_S_b_uvs.fits ! Writing UV FITS file: J1008-1629_S_b_uvs.fits wwins J1008-1629_S_b_map.win ! wwins: Wrote 1 windows to J1008-1629_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236782 Jy ! Component: 100 - total flux cleaned = 0.00369342 Jy ! Component: 150 - total flux cleaned = 0.00420859 Jy ! Component: 200 - total flux cleaned = 0.00477055 Jy ! Component: 250 - total flux cleaned = 0.00522229 Jy ! Component: 300 - total flux cleaned = 0.00550688 Jy ! Component: 350 - total flux cleaned = 0.0057105 Jy ! Component: 400 - total flux cleaned = 0.00571201 Jy ! Component: 450 - total flux cleaned = 0.00602323 Jy ! Component: 500 - total flux cleaned = 0.00620247 Jy ! Component: 550 - total flux cleaned = 0.00648651 Jy ! Component: 600 - total flux cleaned = 0.00670477 Jy ! Component: 650 - total flux cleaned = 0.00681007 Jy ! Component: 700 - total flux cleaned = 0.00691047 Jy ! Component: 750 - total flux cleaned = 0.00690908 Jy ! Component: 800 - total flux cleaned = 0.00695522 Jy ! Component: 850 - total flux cleaned = 0.00686278 Jy ! Component: 900 - total flux cleaned = 0.00677432 Jy ! Component: 950 - total flux cleaned = 0.00673264 Jy ! Component: 1000 - total flux cleaned = 0.00681509 Jy ! Component: 1050 - total flux cleaned = 0.00677277 Jy ! Component: 1100 - total flux cleaned = 0.00677255 Jy ! Component: 1150 - total flux cleaned = 0.00677259 Jy ! Component: 1200 - total flux cleaned = 0.00688515 Jy ! Component: 1250 - total flux cleaned = 0.0069944 Jy ! Component: 1300 - total flux cleaned = 0.00706592 Jy ! Component: 1350 - total flux cleaned = 0.00727325 Jy ! Component: 1400 - total flux cleaned = 0.00747475 Jy ! Component: 1450 - total flux cleaned = 0.0078357 Jy ! Component: 1500 - total flux cleaned = 0.00796347 Jy ! Component: 1550 - total flux cleaned = 0.00815156 Jy ! Component: 1600 - total flux cleaned = 0.00821279 Jy ! Component: 1650 - total flux cleaned = 0.00839385 Jy ! Component: 1700 - total flux cleaned = 0.00860029 Jy ! Component: 1750 - total flux cleaned = 0.00880177 Jy ! Component: 1800 - total flux cleaned = 0.00897088 Jy ! Component: 1850 - total flux cleaned = 0.00908241 Jy ! Component: 1900 - total flux cleaned = 0.00913592 Jy ! Component: 1950 - total flux cleaned = 0.00921673 Jy ! Component: 2000 - total flux cleaned = 0.00924368 Jy ! Component: 2050 - total flux cleaned = 0.00932086 Jy ! Component: 2100 - total flux cleaned = 0.00926991 Jy ! Component: 2150 - total flux cleaned = 0.00912115 Jy ! Component: 2200 - total flux cleaned = 0.00907256 Jy ! Component: 2250 - total flux cleaned = 0.00912033 Jy ! Component: 2300 - total flux cleaned = 0.0090728 Jy ! Component: 2350 - total flux cleaned = 0.00907271 Jy ! Component: 2400 - total flux cleaned = 0.00900458 Jy ! Component: 2450 - total flux cleaned = 0.0090272 Jy ! Component: 2500 - total flux cleaned = 0.0089829 Jy ! Component: 2550 - total flux cleaned = 0.00904854 Jy ! Component: 2600 - total flux cleaned = 0.00911352 Jy ! Component: 2650 - total flux cleaned = 0.00919836 Jy ! Component: 2700 - total flux cleaned = 0.00930285 Jy ! Component: 2750 - total flux cleaned = 0.00936498 Jy ! Component: 2800 - total flux cleaned = 0.00948754 Jy ! Component: 2850 - total flux cleaned = 0.00956819 Jy ! Component: 2900 - total flux cleaned = 0.00968777 Jy ! Component: 2950 - total flux cleaned = 0.00984561 Jy ! Component: 3000 - total flux cleaned = 0.0099038 Jy ! Component: 3050 - total flux cleaned = 0.0100194 Jy ! Component: 3100 - total flux cleaned = 0.0101715 Jy ! Component: 3150 - total flux cleaned = 0.0102281 Jy ! Component: 3200 - total flux cleaned = 0.0103398 Jy ! Component: 3250 - total flux cleaned = 0.0104132 Jy ! Component: 3300 - total flux cleaned = 0.0105043 Jy ! Component: 3350 - total flux cleaned = 0.0105941 Jy ! Component: 3400 - total flux cleaned = 0.0106653 Jy ! Component: 3450 - total flux cleaned = 0.010718 Jy ! Component: 3500 - total flux cleaned = 0.010753 Jy ! Component: 3550 - total flux cleaned = 0.0108049 Jy ! Component: 3600 - total flux cleaned = 0.0108049 Jy ! Component: 3650 - total flux cleaned = 0.010856 Jy ! Component: 3700 - total flux cleaned = 0.0109065 Jy ! Component: 3750 - total flux cleaned = 0.0109234 Jy ! Component: 3800 - total flux cleaned = 0.010973 Jy ! Component: 3850 - total flux cleaned = 0.0109895 Jy ! Component: 3900 - total flux cleaned = 0.0110059 Jy ! Component: 3950 - total flux cleaned = 0.0110703 Jy ! Component: 4000 - total flux cleaned = 0.0110543 Jy ! Component: 4050 - total flux cleaned = 0.0110545 Jy ! Total flux subtracted in 4096 components = 0.0111333 Jy ! Clean residual min=-0.000942 max=0.000904 Jy/beam ! Clean residual mean=-0.000001 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.113658 Jy keep ! Adding 355 model components to the UV plane model. ! The established model now contains 432 components and 0.113658 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1008-1629_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 17.93 at -13.02 degrees (North through East) ! Clean map min=-0.002453 max=0.076334 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1008-1629_S_b_map.fits wmodel /vlbi/uf001/uva//J1008-1629_S_b_map.mod ! Writing 432 model components to file: /vlbi/uf001/uva//J1008-1629_S_b_map.mod wobs /vlbi/uf001/uva//J1008-1629_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1008-1629_S_b_uvs.fits wwins /vlbi/uf001/uva//J1008-1629_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1008-1629_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0763339 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319972 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25752 1.25752 2.51505 5.0301 10.0602 20.1204 40.2408 80.4816 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.076 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 238.563 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1008-1629_S_b_dfm.log closed on Mon Jan 14 00:45:13 2019