! Started logfile: /vlbi/uf001/uva//J1007+1356_X_dfm.log on Mon Jan 14 00:44:10 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1007+1356_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1007+1356_X_uva.fits
! AN table 1: 110 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.980519 visibilities/baseline/integration-bin.
! Found source: J1007+1356
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 27180 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1007+1356_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.067073Jy  sigma=22.251823
! Fit after  self-cal, rms=0.614056Jy  sigma=13.196244
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.258 mas, bmaj=3.936 mas, bpa=-18.47 degrees
! Estimated noise=0.476359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.280095 Jy
! Component: 100  -  total flux cleaned = 0.368187 Jy
! Total flux subtracted in 100 components = 0.368187 Jy
! Clean residual min=-0.023363 max=0.038994 Jy/beam
! Clean residual mean=0.000167 rms=0.006688 Jy/beam
! Combined flux in latest and established models = 0.368187 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.368187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.127803Jy  sigma=2.523956
! Fit after  self-cal, rms=0.126399Jy  sigma=2.480526
! Inverting map 
! Added new window around map position (1.6, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0478728 Jy
! Component: 100  -  total flux cleaned = 0.0782096 Jy
! Total flux subtracted in 100 components = 0.0782096 Jy
! Clean residual min=-0.017608 max=0.032945 Jy/beam
! Clean residual mean=0.000112 rms=0.004583 Jy/beam
! Combined flux in latest and established models = 0.446397 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.446397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093624Jy  sigma=1.855235
! Fit after  self-cal, rms=0.093250Jy  sigma=1.841328
! Inverting map 
! Added new window around map position (8.8, -7.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0304789 Jy
! Component: 100  -  total flux cleaned = 0.0510635 Jy
! Total flux subtracted in 100 components = 0.0510635 Jy
! Clean residual min=-0.014856 max=0.015880 Jy/beam
! Clean residual mean=0.000077 rms=0.003349 Jy/beam
! Combined flux in latest and established models = 0.497461 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 40 components and 0.497461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075919Jy  sigma=1.510749
! Fit after  self-cal, rms=0.075249Jy  sigma=1.492696
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.564 mas, bmaj=4.26 mas, bpa=-18.24 degrees
! Estimated noise=0.208926 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0262613 Jy
! Component: 100  -  total flux cleaned = 0.0441586 Jy
! Component: 150  -  total flux cleaned = 0.0577616 Jy
! Component: 200  -  total flux cleaned = 0.0685471 Jy
! Total flux subtracted in 200 components = 0.0685471 Jy
! Clean residual min=-0.009973 max=0.011213 Jy/beam
! Clean residual mean=0.000049 rms=0.002657 Jy/beam
! Combined flux in latest and established models = 0.566008 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 92 components and 0.566008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061315Jy  sigma=1.232911
! Fit after  self-cal, rms=0.060521Jy  sigma=1.213195
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.564 x 4.26 at -18.24 degrees (North through East)
! Clean map  min=-0.009048  max=0.36755 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.99     KP        1.00     LA        0.99     
!   NL        1.03     OV        0.97     PT        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.00     KP        1.01     LA        0.99     
!   NL        1.04     OV        0.98     PT        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.00     KP        1.02     LA        0.99     
!   NL        1.03     OV        0.96     PT        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.99     KP        1.00     LA        0.99     
!   NL        1.03     OV        0.98     PT        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.99     KP        1.01     LA        0.99     
!   NL        1.03     OV        0.98     PT        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.99     KP        1.01     LA        0.99     
!   NL        1.03     OV        0.99     PT        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.99     KP        1.01     LA        0.99     
!   NL        1.04     OV        0.97     PT        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.99     KP        1.01     LA        1.00     
!   NL        1.04     OV        0.99     PT        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.99     KP        1.01     LA        0.99     
!   NL        1.04     OV        0.99     PT        0.93     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        0.99     KP        1.01     LA        1.00     
!   NL        1.04     OV        0.99     PT        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.99     KP        1.01     LA        0.99     
!   NL        1.04     OV        1.00     PT        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.00     KP        1.01     LA        0.99     
!   NL        1.05     OV        0.99     PT        0.93     
! 
! 
! Fit before self-cal, rms=0.060521Jy  sigma=1.213195
! Fit after  self-cal, rms=0.055524Jy  sigma=1.140466
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.565 mas, bmaj=4.282 mas, bpa=-18.09 degrees
! Estimated noise=0.206469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00803257 Jy
! Component: 100  -  total flux cleaned = 0.00999546 Jy
! Component: 150  -  total flux cleaned = 0.0112053 Jy
! Component: 200  -  total flux cleaned = 0.0119293 Jy
! Total flux subtracted in 200 components = 0.0119293 Jy
! Clean residual min=-0.004902 max=0.005342 Jy/beam
! Clean residual mean=0.000006 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 0.577937 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 0.577937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054018Jy  sigma=1.106415
! Fit after  self-cal, rms=0.053828Jy  sigma=1.102526
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053828Jy  sigma=1.102526
! Fit after  self-cal, rms=0.052755Jy  sigma=1.077731
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.574 mas, bmaj=4.266 mas, bpa=-18.25 degrees
! Estimated noise=0.206909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163895 Jy
! Component: 100  -  total flux cleaned = 0.00284407 Jy
! Component: 150  -  total flux cleaned = 0.00352633 Jy
! Component: 200  -  total flux cleaned = 0.00359544 Jy
! Total flux subtracted in 200 components = 0.00359544 Jy
! Clean residual min=-0.003137 max=0.003785 Jy/beam
! Clean residual mean=-0.000005 rms=0.000851 Jy/beam
! Combined flux in latest and established models = 0.581532 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 129 components and 0.581532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052352Jy  sigma=1.068793
! Fit after  self-cal, rms=0.052310Jy  sigma=1.067543
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.2, -15.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291379 Jy
! Component: 100  -  total flux cleaned = 0.00436581 Jy
! Component: 150  -  total flux cleaned = 0.00522238 Jy
! Component: 200  -  total flux cleaned = 0.00594315 Jy
! Total flux subtracted in 200 components = 0.00594315 Jy
! Clean residual min=-0.002635 max=0.002707 Jy/beam
! Clean residual mean=-0.000005 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.587476 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 159 components and 0.587476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051958Jy  sigma=1.059506
! Fit after  self-cal, rms=0.051941Jy  sigma=1.059249
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051941Jy  sigma=1.059249
! Fit after  self-cal, rms=0.051903Jy  sigma=1.058304
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.574 mas, bmaj=4.262 mas, bpa=-18.25 degrees
! Estimated noise=0.207017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000539325 Jy
! Component: 100  -  total flux cleaned = 0.0017812 Jy
! Component: 150  -  total flux cleaned = 0.00273687 Jy
! Component: 200  -  total flux cleaned = 0.00343163 Jy
! Total flux subtracted in 200 components = 0.00343163 Jy
! Clean residual min=-0.002294 max=0.002496 Jy/beam
! Clean residual mean=-0.000003 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.590907 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 175 components and 0.590907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051761Jy  sigma=1.055312
! Fit after  self-cal, rms=0.051752Jy  sigma=1.055113
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27, -33.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247244 Jy
! Component: 100  -  total flux cleaned = 0.00330051 Jy
! Component: 150  -  total flux cleaned = 0.00362146 Jy
! Component: 200  -  total flux cleaned = 0.0039976 Jy
! Total flux subtracted in 200 components = 0.0039976 Jy
! Clean residual min=-0.001917 max=0.002133 Jy/beam
! Clean residual mean=-0.000003 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.594905 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 192 components and 0.594905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051597Jy  sigma=1.052285
! Fit after  self-cal, rms=0.051589Jy  sigma=1.052033
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051589Jy  sigma=1.052033
! Fit after  self-cal, rms=0.051551Jy  sigma=1.051638
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.383 mas, bmaj=4.376 mas, bpa=-21.09 degrees
! Estimated noise=0.226221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127036 Jy
! Component: 100  -  total flux cleaned = 0.0018058 Jy
! Component: 150  -  total flux cleaned = 0.00227121 Jy
! Component: 200  -  total flux cleaned = 0.00251781 Jy
! Total flux subtracted in 200 components = 0.00251781 Jy
! Clean residual min=-0.001825 max=0.002232 Jy/beam
! Clean residual mean=-0.000005 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.597423 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 217 components and 0.597423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051493Jy  sigma=1.050543
! Fit after  self-cal, rms=0.051490Jy  sigma=1.050480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033962 Jy
! Component: 100  -  total flux cleaned = 0.000593986 Jy
! Component: 150  -  total flux cleaned = 0.000857593 Jy
! Component: 200  -  total flux cleaned = 0.00110071 Jy
! Total flux subtracted in 200 components = 0.00110071 Jy
! Clean residual min=-0.001710 max=0.002179 Jy/beam
! Clean residual mean=-0.000005 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.598523 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 233 components and 0.598523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051459Jy  sigma=1.049891
! Fit after  self-cal, rms=0.051458Jy  sigma=1.049852
! Inverting map 
! Added new window around map position (24, -15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113225 Jy
! Component: 100  -  total flux cleaned = 0.00151611 Jy
! Component: 150  -  total flux cleaned = 0.00179002 Jy
! Component: 200  -  total flux cleaned = 0.00196468 Jy
! Total flux subtracted in 200 components = 0.00196468 Jy
! Clean residual min=-0.001598 max=0.001356 Jy/beam
! Clean residual mean=-0.000005 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.600488 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 262 components and 0.600488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051365Jy  sigma=1.048163
! Fit after  self-cal, rms=0.051359Jy  sigma=1.048039
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.573 mas, bmaj=4.261 mas, bpa=-18.24 degrees
! Estimated noise=0.207057 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.573 x 4.261 at -18.24 degrees (North through East)
! Clean map  min=-0.0015933  max=0.36208 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.262 mas, bmaj=3.923 mas, bpa=-18.52 degrees
! Estimated noise=0.474394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.278838 Jy
! Component: 100  -  total flux cleaned = 0.374969 Jy
! Component: 150  -  total flux cleaned = 0.423521 Jy
! Component: 200  -  total flux cleaned = 0.455686 Jy
! Total flux subtracted in 200 components = 0.455686 Jy
! Clean residual min=-0.011526 max=0.018009 Jy/beam
! Clean residual mean=0.000077 rms=0.003260 Jy/beam
! Combined flux in latest and established models = 0.455686 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.455686 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.573 mas, bmaj=4.261 mas, bpa=-18.24 degrees
! Estimated noise=0.207057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.033858 Jy
! Component: 100  -  total flux cleaned = 0.0563346 Jy
! Component: 150  -  total flux cleaned = 0.0726288 Jy
! Component: 200  -  total flux cleaned = 0.0847428 Jy
! Total flux subtracted in 200 components = 0.0847428 Jy
! Clean residual min=-0.006075 max=0.007388 Jy/beam
! Clean residual mean=0.000026 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.540429 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 79 components and 0.540429 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.383 mas, bmaj=4.376 mas, bpa=-21.09 degrees
! Estimated noise=0.226221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117681 Jy
! Component: 100  -  total flux cleaned = 0.0200871 Jy
! Component: 150  -  total flux cleaned = 0.0263984 Jy
! Component: 200  -  total flux cleaned = 0.0314527 Jy
! Total flux subtracted in 200 components = 0.0314527 Jy
! Clean residual min=-0.003713 max=0.004674 Jy/beam
! Clean residual mean=0.000008 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.571881 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413711 Jy
! Component: 100  -  total flux cleaned = 0.00764193 Jy
! Component: 150  -  total flux cleaned = 0.0106386 Jy
! Component: 200  -  total flux cleaned = 0.0132312 Jy
! Total flux subtracted in 200 components = 0.0132312 Jy
! Clean residual min=-0.002711 max=0.003170 Jy/beam
! Clean residual mean=0.000002 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.585112 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 146 components and 0.585113 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.573 mas, bmaj=4.261 mas, bpa=-18.24 degrees
! Estimated noise=0.207057 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130754 Jy
! Component: 100  -  total flux cleaned = 0.00197681 Jy
! Component: 150  -  total flux cleaned = 0.00275037 Jy
! Component: 200  -  total flux cleaned = 0.00371367 Jy
! Total flux subtracted in 200 components = 0.00371367 Jy
! Clean residual min=-0.002681 max=0.002412 Jy/beam
! Clean residual mean=-0.000000 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.588826 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 180 components and 0.588826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051846Jy  sigma=1.057805
! Fit after  self-cal, rms=0.051794Jy  sigma=1.056437
wmodel J1007+1356_X_map.mod
! Writing 180 model components to file: J1007+1356_X_map.mod
wobs   J1007+1356_X_uvs.fits
! Writing UV FITS file: J1007+1356_X_uvs.fits
wwins  J1007+1356_X_map.win
! wwins: Wrote 6 windows to J1007+1356_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152396 Jy
! Component: 100  -  total flux cleaned = -1.03846e-05 Jy
! Component: 150  -  total flux cleaned = -0.000350176 Jy
! Component: 200  -  total flux cleaned = -0.000527522 Jy
! Component: 250  -  total flux cleaned = -0.000558807 Jy
! Component: 300  -  total flux cleaned = -0.000623092 Jy
! Component: 350  -  total flux cleaned = -0.000624391 Jy
! Component: 400  -  total flux cleaned = -0.000625075 Jy
! Component: 450  -  total flux cleaned = -0.000509134 Jy
! Component: 500  -  total flux cleaned = -0.000370589 Jy
! Component: 550  -  total flux cleaned = -0.000317843 Jy
! Component: 600  -  total flux cleaned = -0.000213293 Jy
! Component: 650  -  total flux cleaned = -0.000137091 Jy
! Component: 700  -  total flux cleaned = -6.26915e-05 Jy
! Component: 750  -  total flux cleaned = 9.63475e-06 Jy
! Component: 800  -  total flux cleaned = 1.01865e-05 Jy
! Component: 850  -  total flux cleaned = 5.60886e-05 Jy
! Component: 900  -  total flux cleaned = 0.000100315 Jy
! Component: 950  -  total flux cleaned = 0.000143359 Jy
! Component: 1000  -  total flux cleaned = 8.07887e-05 Jy
! Component: 1050  -  total flux cleaned = 2.03249e-05 Jy
! Component: 1100  -  total flux cleaned = 6.00986e-05 Jy
! Component: 1150  -  total flux cleaned = -3.70353e-05 Jy
! Component: 1200  -  total flux cleaned = -1.68003e-05 Jy
! Component: 1250  -  total flux cleaned = 2.03406e-05 Jy
! Component: 1300  -  total flux cleaned = 2.07908e-05 Jy
! Component: 1350  -  total flux cleaned = 3.87747e-05 Jy
! Component: 1400  -  total flux cleaned = 5.66494e-05 Jy
! Component: 1450  -  total flux cleaned = 7.39436e-05 Jy
! Component: 1500  -  total flux cleaned = 4.06501e-05 Jy
! Component: 1550  -  total flux cleaned = 5.72212e-05 Jy
! Component: 1600  -  total flux cleaned = 4.08026e-05 Jy
! Component: 1650  -  total flux cleaned = 5.62053e-05 Jy
! Component: 1700  -  total flux cleaned = 4.05056e-05 Jy
! Component: 1750  -  total flux cleaned = 2.50646e-05 Jy
! Component: 1800  -  total flux cleaned = -1.97289e-05 Jy
! Component: 1850  -  total flux cleaned = -1.96164e-05 Jy
! Component: 1900  -  total flux cleaned = -4.82237e-05 Jy
! Component: 1950  -  total flux cleaned = -7.68471e-05 Jy
! Component: 2000  -  total flux cleaned = -0.000104638 Jy
! Component: 2050  -  total flux cleaned = -0.000131694 Jy
! Component: 2100  -  total flux cleaned = -0.000118293 Jy
! Component: 2150  -  total flux cleaned = -0.00017079 Jy
! Component: 2200  -  total flux cleaned = -0.000131776 Jy
! Component: 2250  -  total flux cleaned = -0.00013157 Jy
! Component: 2300  -  total flux cleaned = -0.00010701 Jy
! Component: 2350  -  total flux cleaned = -0.000168497 Jy
! Component: 2400  -  total flux cleaned = -0.000168446 Jy
! Component: 2450  -  total flux cleaned = -0.00013257 Jy
! Component: 2500  -  total flux cleaned = -0.00014414 Jy
! Component: 2550  -  total flux cleaned = -0.000109542 Jy
! Component: 2600  -  total flux cleaned = -0.000109661 Jy
! Component: 2650  -  total flux cleaned = -5.38733e-05 Jy
! Component: 2700  -  total flux cleaned = -7.61084e-05 Jy
! Component: 2750  -  total flux cleaned = -4.36996e-05 Jy
! Component: 2800  -  total flux cleaned = -3.3166e-05 Jy
! Component: 2850  -  total flux cleaned = -3.32666e-05 Jy
! Component: 2900  -  total flux cleaned = -1.23052e-05 Jy
! Component: 2950  -  total flux cleaned = -2.08933e-06 Jy
! Component: 3000  -  total flux cleaned = -1.22015e-05 Jy
! Component: 3050  -  total flux cleaned = -2.19597e-05 Jy
! Component: 3100  -  total flux cleaned = -2.20365e-06 Jy
! Component: 3150  -  total flux cleaned = -2.1756e-05 Jy
! Component: 3200  -  total flux cleaned = -2.61576e-06 Jy
! Component: 3250  -  total flux cleaned = -1.22548e-05 Jy
! Component: 3300  -  total flux cleaned = -4.03781e-05 Jy
! Component: 3350  -  total flux cleaned = -5.90003e-05 Jy
! Component: 3400  -  total flux cleaned = -4.97499e-05 Jy
! Component: 3450  -  total flux cleaned = -5.87436e-05 Jy
! Component: 3500  -  total flux cleaned = -6.75541e-05 Jy
! Component: 3550  -  total flux cleaned = -4.11417e-05 Jy
! Component: 3600  -  total flux cleaned = -3.22492e-05 Jy
! Component: 3650  -  total flux cleaned = -5.82193e-05 Jy
! Component: 3700  -  total flux cleaned = -3.25876e-05 Jy
! Component: 3750  -  total flux cleaned = -4.11208e-05 Jy
! Component: 3800  -  total flux cleaned = -4.12156e-05 Jy
! Component: 3850  -  total flux cleaned = -3.29819e-05 Jy
! Component: 3900  -  total flux cleaned = -3.30572e-05 Jy
! Component: 3950  -  total flux cleaned = -9.76691e-05 Jy
! Component: 4000  -  total flux cleaned = -5.74482e-05 Jy
! Component: 4050  -  total flux cleaned = -6.53603e-05 Jy
! Total flux subtracted in 4096 components = -1.82485e-05 Jy
! Clean residual min=-0.000427 max=0.000454 Jy/beam
! Clean residual mean=0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.588808 Jy
keep
! Adding 301 model components to the UV plane model.
! The established model now contains 477 components and 0.588808 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1007+1356_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.573 x 4.261 at -18.24 degrees (North through East)
! Clean map  min=-0.0012487  max=0.36234 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1007+1356_X_map.fits
wmodel /vlbi/uf001/uva//J1007+1356_X_map.mod
! Writing 477 model components to file: /vlbi/uf001/uva//J1007+1356_X_map.mod
wobs   /vlbi/uf001/uva//J1007+1356_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1007+1356_X_uvs.fits
wwins  /vlbi/uf001/uva//J1007+1356_X_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J1007+1356_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.362342 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000148312 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.122794 0.122794 0.245588 0.491177 0.982354 1.96471 3.92941 7.85883 15.7177 31.4353 62.8706
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.362 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2443.11 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1007+1356_X_dfm.log closed on Mon Jan 14 00:44:16 2019