! Started logfile: /vlbi/uf001/uva//J1006+0509_X_dfm.log on Mon Jan 14 00:43:46 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J1006+0509_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1006+0509_X_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924691 visibilities/baseline/integration-bin.
! Found source: J1006+0509
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 35952 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1006+0509_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005745Jy  sigma=23.251277
! Fit after  self-cal, rms=0.917422Jy  sigma=21.231403
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7053 mas, bmaj=1.687 mas, bpa=-1.142 degrees
! Estimated noise=0.302491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0629618 Jy
! Component: 100  -  total flux cleaned = 0.0809017 Jy
! Total flux subtracted in 100 components = 0.0809017 Jy
! Clean residual min=-0.003151 max=0.007616 Jy/beam
! Clean residual mean=-0.000002 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.0809017 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0809017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056466Jy  sigma=1.257108
! Fit after  self-cal, rms=0.056266Jy  sigma=1.253136
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00782786 Jy
! Component: 100  -  total flux cleaned = 0.0107747 Jy
! Total flux subtracted in 100 components = 0.0107747 Jy
! Clean residual min=-0.002417 max=0.006537 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.0916764 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.0916764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055252Jy  sigma=1.229207
! Fit after  self-cal, rms=0.055244Jy  sigma=1.228897
! Inverting map 
! Added new window around map position (1, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00530005 Jy
! Component: 100  -  total flux cleaned = 0.00691878 Jy
! Total flux subtracted in 100 components = 0.00691878 Jy
! Clean residual min=-0.002125 max=0.002708 Jy/beam
! Clean residual mean=-0.000000 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0985952 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 16 components and 0.0985952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054761Jy  sigma=1.216088
! Fit after  self-cal, rms=0.054713Jy  sigma=1.215014
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9057 mas, bmaj=2.022 mas, bpa=-0.8187 degrees
! Estimated noise=0.162903 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301953 Jy
! Component: 100  -  total flux cleaned = 0.00481677 Jy
! Component: 150  -  total flux cleaned = 0.00552683 Jy
! Component: 200  -  total flux cleaned = 0.00597311 Jy
! Total flux subtracted in 200 components = 0.00597311 Jy
! Clean residual min=-0.001842 max=0.001557 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.104568 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.104568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054543Jy  sigma=1.210254
! Fit after  self-cal, rms=0.054530Jy  sigma=1.210083
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9057 x 2.022 at -0.8187 degrees (North through East)
! Clean map  min=-0.0017453  max=0.081865 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.02     KP        1.03     
!   LA        0.99     MK        1.02     NL        1.09     OV        0.94     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.95     KP        1.01     
!   LA        1.02     MK        1.03     NL        1.08     OV        0.91     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.97     KP        1.03     
!   LA        1.00     MK        1.01     NL        1.09     OV        0.94     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.97     KP        1.03     
!   LA        0.97     MK        0.99     NL        1.10     OV        0.94     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.06     HN        0.96     KP        1.00     
!   LA        1.00     MK        1.05     NL        1.09     OV        0.91     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.03     KP        1.05     
!   LA        1.00     MK        1.02     NL        1.05     OV        0.92     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.94     KP        1.02     
!   LA        0.98     MK        1.00     NL        1.07     OV        0.91     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.96     KP        0.99     
!   LA        1.00     MK        1.05     NL        1.08     OV        0.95     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.97     KP        0.98     
!   LA        1.01     MK        0.98     NL        1.08     OV        0.96     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        1.03     
!   LA        1.03     MK        0.95     NL        1.11     OV        0.92     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.97     KP        1.03     
!   LA        1.02     MK        1.02     NL        1.08     OV        0.93     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.06     HN        0.94     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.13     OV        0.94     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.054530Jy  sigma=1.210083
! Fit after  self-cal, rms=0.054298Jy  sigma=1.203240
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9011 mas, bmaj=2.024 mas, bpa=-0.4986 degrees
! Estimated noise=0.163702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000716195 Jy
! Component: 100  -  total flux cleaned = -0.000896478 Jy
! Component: 150  -  total flux cleaned = -0.00089564 Jy
! Component: 200  -  total flux cleaned = -0.000893156 Jy
! Total flux subtracted in 200 components = -0.000893156 Jy
! Clean residual min=-0.000992 max=0.000943 Jy/beam
! Clean residual mean=0.000001 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.103675 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 47 components and 0.103675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054267Jy  sigma=1.202584
! Fit after  self-cal, rms=0.054284Jy  sigma=1.202428
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054284Jy  sigma=1.202428
! Fit after  self-cal, rms=0.054296Jy  sigma=1.199989
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9008 mas, bmaj=2.026 mas, bpa=-0.3686 degrees
! Estimated noise=0.163733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00073584 Jy
! Component: 100  -  total flux cleaned = -0.000858186 Jy
! Component: 150  -  total flux cleaned = -0.000826306 Jy
! Component: 200  -  total flux cleaned = -0.000827057 Jy
! Total flux subtracted in 200 components = -0.000827057 Jy
! Clean residual min=-0.000934 max=0.000823 Jy/beam
! Clean residual mean=0.000000 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.102848 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.102848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054283Jy  sigma=1.199693
! Fit after  self-cal, rms=0.054290Jy  sigma=1.199646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.88766e-06 Jy
! Component: 100  -  total flux cleaned = 2.63936e-05 Jy
! Component: 150  -  total flux cleaned = 2.633e-05 Jy
! Component: 200  -  total flux cleaned = 2.67682e-05 Jy
! Total flux subtracted in 200 components = 2.67682e-05 Jy
! Clean residual min=-0.000923 max=0.000829 Jy/beam
! Clean residual mean=0.000000 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.102875 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 0.102875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054286Jy  sigma=1.199552
! Fit after  self-cal, rms=0.054285Jy  sigma=1.199548
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054285Jy  sigma=1.199548
! Fit after  self-cal, rms=0.054286Jy  sigma=1.199439
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9 mas, bmaj=2.027 mas, bpa=-0.3552 degrees
! Estimated noise=0.163694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000484573 Jy
! Component: 100  -  total flux cleaned = -0.000609415 Jy
! Component: 150  -  total flux cleaned = -0.000621401 Jy
! Component: 200  -  total flux cleaned = -0.000611485 Jy
! Total flux subtracted in 200 components = -0.000611485 Jy
! Clean residual min=-0.000872 max=0.000818 Jy/beam
! Clean residual mean=0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.102263 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 68 components and 0.102263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054280Jy  sigma=1.199297
! Fit after  self-cal, rms=0.054281Jy  sigma=1.199298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.89813e-05 Jy
! Component: 100  -  total flux cleaned = -9.94976e-06 Jy
! Component: 150  -  total flux cleaned = -1.76014e-06 Jy
! Component: 200  -  total flux cleaned = -1.91365e-06 Jy
! Total flux subtracted in 200 components = -1.91365e-06 Jy
! Clean residual min=-0.000864 max=0.000820 Jy/beam
! Clean residual mean=0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.102261 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 71 components and 0.102261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054279Jy  sigma=1.199239
! Fit after  self-cal, rms=0.054278Jy  sigma=1.199237
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054278Jy  sigma=1.199237
! Fit after  self-cal, rms=0.054256Jy  sigma=1.199190
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.171 mas, bmaj=3.231 mas, bpa=0.06149 degrees
! Estimated noise=0.205966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000214922 Jy
! Component: 100  -  total flux cleaned = -0.00021487 Jy
! Component: 150  -  total flux cleaned = -0.000188996 Jy
! Component: 200  -  total flux cleaned = -0.000171742 Jy
! Total flux subtracted in 200 components = -0.000171742 Jy
! Clean residual min=-0.000977 max=0.001000 Jy/beam
! Clean residual mean=0.000000 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.10209 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 88 components and 0.10209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054255Jy  sigma=1.199163
! Fit after  self-cal, rms=0.054256Jy  sigma=1.199162
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.56097e-05 Jy
! Component: 100  -  total flux cleaned = 3.59171e-05 Jy
! Component: 150  -  total flux cleaned = 4.07414e-05 Jy
! Component: 200  -  total flux cleaned = 4.98184e-05 Jy
! Total flux subtracted in 200 components = 4.98184e-05 Jy
! Clean residual min=-0.000976 max=0.000992 Jy/beam
! Clean residual mean=0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.10214 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.10214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054255Jy  sigma=1.199159
! Fit after  self-cal, rms=0.054255Jy  sigma=1.199156
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8993 mas, bmaj=2.027 mas, bpa=-0.3565 degrees
! Estimated noise=0.163627 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8993 x 2.027 at -0.3565 degrees (North through East)
! Clean map  min=-0.00075112  max=0.082347 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7005 mas, bmaj=1.693 mas, bpa=-0.6713 degrees
! Estimated noise=0.303307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0631213 Jy
! Component: 100  -  total flux cleaned = 0.0812702 Jy
! Component: 150  -  total flux cleaned = 0.0891926 Jy
! Component: 200  -  total flux cleaned = 0.0934746 Jy
! Total flux subtracted in 200 components = 0.0934746 Jy
! Clean residual min=-0.001449 max=0.002090 Jy/beam
! Clean residual mean=-0.000001 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.0934746 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0934746 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8993 mas, bmaj=2.027 mas, bpa=-0.3565 degrees
! Estimated noise=0.163627 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00280507 Jy
! Component: 100  -  total flux cleaned = 0.00443889 Jy
! Component: 150  -  total flux cleaned = 0.00552774 Jy
! Component: 200  -  total flux cleaned = 0.00627586 Jy
! Total flux subtracted in 200 components = 0.00627586 Jy
! Clean residual min=-0.000893 max=0.000870 Jy/beam
! Clean residual mean=-0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0997505 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 27 components and 0.0997505 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.171 mas, bmaj=3.231 mas, bpa=0.06149 degrees
! Estimated noise=0.205966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000967158 Jy
! Component: 100  -  total flux cleaned = 0.00145502 Jy
! Component: 150  -  total flux cleaned = 0.00161057 Jy
! Component: 200  -  total flux cleaned = 0.00173899 Jy
! Total flux subtracted in 200 components = 0.00173899 Jy
! Clean residual min=-0.000937 max=0.001016 Jy/beam
! Clean residual mean=0.000000 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.101489 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.74819e-05 Jy
! Component: 100  -  total flux cleaned = 0.000187813 Jy
! Component: 150  -  total flux cleaned = 0.000251178 Jy
! Component: 200  -  total flux cleaned = 0.000306782 Jy
! Total flux subtracted in 200 components = 0.000306782 Jy
! Clean residual min=-0.000953 max=0.001014 Jy/beam
! Clean residual mean=0.000000 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.101796 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 62 components and 0.101796 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8993 mas, bmaj=2.027 mas, bpa=-0.3565 degrees
! Estimated noise=0.163627 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.07644e-05 Jy
! Component: 100  -  total flux cleaned = -4.13502e-06 Jy
! Component: 150  -  total flux cleaned = -4.37831e-06 Jy
! Component: 200  -  total flux cleaned = 1.05677e-05 Jy
! Total flux subtracted in 200 components = 1.05677e-05 Jy
! Clean residual min=-0.000844 max=0.000817 Jy/beam
! Clean residual mean=0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.101807 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 0.101807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054261Jy  sigma=1.199279
! Fit after  self-cal, rms=0.054258Jy  sigma=1.199229
wmodel J1006+0509_X_map.mod
! Writing 74 model components to file: J1006+0509_X_map.mod
wobs   J1006+0509_X_uvs.fits
! Writing UV FITS file: J1006+0509_X_uvs.fits
wwins  J1006+0509_X_map.win
! wwins: Wrote 3 windows to J1006+0509_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.84422e-05 Jy
! Component: 100  -  total flux cleaned = 8.39801e-05 Jy
! Component: 150  -  total flux cleaned = 0.000150022 Jy
! Component: 200  -  total flux cleaned = 0.000150445 Jy
! Component: 250  -  total flux cleaned = 0.000138087 Jy
! Component: 300  -  total flux cleaned = 0.000101949 Jy
! Component: 350  -  total flux cleaned = 7.84341e-05 Jy
! Component: 400  -  total flux cleaned = 3.27298e-05 Jy
! Component: 450  -  total flux cleaned = -1.18342e-05 Jy
! Component: 500  -  total flux cleaned = 2.11998e-05 Jy
! Component: 550  -  total flux cleaned = 1.01651e-05 Jy
! Component: 600  -  total flux cleaned = 4.20712e-05 Jy
! Component: 650  -  total flux cleaned = 5.25538e-05 Jy
! Component: 700  -  total flux cleaned = 8.3548e-05 Jy
! Component: 750  -  total flux cleaned = 0.000113948 Jy
! Component: 800  -  total flux cleaned = 0.000143974 Jy
! Component: 850  -  total flux cleaned = 0.00015384 Jy
! Component: 900  -  total flux cleaned = 0.000173695 Jy
! Component: 950  -  total flux cleaned = 0.000222335 Jy
! Component: 1000  -  total flux cleaned = 0.000260701 Jy
! Component: 1050  -  total flux cleaned = 0.000270148 Jy
! Component: 1100  -  total flux cleaned = 0.000317113 Jy
! Component: 1150  -  total flux cleaned = 0.000363312 Jy
! Component: 1200  -  total flux cleaned = 0.000372277 Jy
! Component: 1250  -  total flux cleaned = 0.000381279 Jy
! Component: 1300  -  total flux cleaned = 0.000363221 Jy
! Component: 1350  -  total flux cleaned = 0.000407949 Jy
! Component: 1400  -  total flux cleaned = 0.000425614 Jy
! Component: 1450  -  total flux cleaned = 0.000425787 Jy
! Component: 1500  -  total flux cleaned = 0.000477891 Jy
! Component: 1550  -  total flux cleaned = 0.000486329 Jy
! Component: 1600  -  total flux cleaned = 0.000494837 Jy
! Component: 1650  -  total flux cleaned = 0.000503207 Jy
! Component: 1700  -  total flux cleaned = 0.000494875 Jy
! Component: 1750  -  total flux cleaned = 0.000536485 Jy
! Component: 1800  -  total flux cleaned = 0.000561248 Jy
! Component: 1850  -  total flux cleaned = 0.000553001 Jy
! Component: 1900  -  total flux cleaned = 0.000561104 Jy
! Component: 1950  -  total flux cleaned = 0.000577201 Jy
! Component: 2000  -  total flux cleaned = 0.00057704 Jy
! Component: 2050  -  total flux cleaned = 0.000585007 Jy
! Component: 2100  -  total flux cleaned = 0.000577073 Jy
! Component: 2150  -  total flux cleaned = 0.000608287 Jy
! Component: 2200  -  total flux cleaned = 0.000600504 Jy
! Component: 2250  -  total flux cleaned = 0.000615842 Jy
! Component: 2300  -  total flux cleaned = 0.00059302 Jy
! Component: 2350  -  total flux cleaned = 0.000623244 Jy
! Component: 2400  -  total flux cleaned = 0.000653235 Jy
! Component: 2450  -  total flux cleaned = 0.000645749 Jy
! Component: 2500  -  total flux cleaned = 0.000645745 Jy
! Component: 2550  -  total flux cleaned = 0.000660474 Jy
! Component: 2600  -  total flux cleaned = 0.000667828 Jy
! Component: 2650  -  total flux cleaned = 0.000704108 Jy
! Component: 2700  -  total flux cleaned = 0.000682572 Jy
! Component: 2750  -  total flux cleaned = 0.000718382 Jy
! Component: 2800  -  total flux cleaned = 0.000746855 Jy
! Component: 2850  -  total flux cleaned = 0.000761004 Jy
! Component: 2900  -  total flux cleaned = 0.000768052 Jy
! Component: 2950  -  total flux cleaned = 0.000782059 Jy
! Component: 3000  -  total flux cleaned = 0.000768266 Jy
! Component: 3050  -  total flux cleaned = 0.000789127 Jy
! Component: 3100  -  total flux cleaned = 0.000802871 Jy
! Component: 3150  -  total flux cleaned = 0.000816435 Jy
! Component: 3200  -  total flux cleaned = 0.000823232 Jy
! Component: 3250  -  total flux cleaned = 0.000829954 Jy
! Component: 3300  -  total flux cleaned = 0.0008367 Jy
! Component: 3350  -  total flux cleaned = 0.00082998 Jy
! Component: 3400  -  total flux cleaned = 0.000849859 Jy
! Component: 3450  -  total flux cleaned = 0.000882753 Jy
! Component: 3500  -  total flux cleaned = 0.000882787 Jy
! Component: 3550  -  total flux cleaned = 0.000869749 Jy
! Component: 3600  -  total flux cleaned = 0.000915158 Jy
! Component: 3650  -  total flux cleaned = 0.000940953 Jy
! Component: 3700  -  total flux cleaned = 0.000934502 Jy
! Component: 3750  -  total flux cleaned = 0.000947235 Jy
! Component: 3800  -  total flux cleaned = 0.000953631 Jy
! Component: 3850  -  total flux cleaned = 0.000978939 Jy
! Component: 3900  -  total flux cleaned = 0.000985263 Jy
! Component: 3950  -  total flux cleaned = 0.000978954 Jy
! Component: 4000  -  total flux cleaned = 0.000997717 Jy
! Component: 4050  -  total flux cleaned = 0.000997712 Jy
! Total flux subtracted in 4096 components = 0.00102861 Jy
! Clean residual min=-0.000387 max=0.000343 Jy/beam
! Clean residual mean=0.000000 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.102835 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 387 components and 0.102835 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1006+0509_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8993 x 2.027 at -0.3565 degrees (North through East)
! Clean map  min=-0.00056364  max=0.082262 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1006+0509_X_map.fits
wmodel /vlbi/uf001/uva//J1006+0509_X_map.mod
! Writing 387 model components to file: /vlbi/uf001/uva//J1006+0509_X_map.mod
wobs   /vlbi/uf001/uva//J1006+0509_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1006+0509_X_uvs.fits
wwins  /vlbi/uf001/uva//J1006+0509_X_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1006+0509_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0822621 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000106929 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.389958 0.389958 0.779915 1.55983 3.11966 6.23932 12.4786 24.9573 49.9146 99.8291
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.082 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  769.314 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1006+0509_X_dfm.log closed on Mon Jan 14 00:43:52 2019