! Started logfile: /vlbi/uf001/uva//J1001+1015_S_dfm.log on Mon Jan 14 00:42:08 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1001+1015_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1001+1015_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.918519 visibilities/baseline/integration-bin.
! Found source: J1001+1015
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7068 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1001+1015_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009944Jy  sigma=22.241661
! Fit after  self-cal, rms=0.890844Jy  sigma=19.507554
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.805 mas, bmaj=6.626 mas, bpa=-3.265 degrees
! Estimated noise=0.560653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0830922 Jy
! Component: 100  -  total flux cleaned = 0.109427 Jy
! Total flux subtracted in 100 components = 0.109427 Jy
! Clean residual min=-0.013167 max=0.064079 Jy/beam
! Clean residual mean=-0.000085 rms=0.004413 Jy/beam
! Combined flux in latest and established models = 0.109427 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.109427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113493Jy  sigma=2.457228
! Fit after  self-cal, rms=0.112432Jy  sigma=2.434957
! Inverting map 
! Added new window around map position (-3.5, -11).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0533967 Jy
! Component: 100  -  total flux cleaned = 0.0726815 Jy
! Total flux subtracted in 100 components = 0.0726815 Jy
! Clean residual min=-0.008240 max=0.018259 Jy/beam
! Clean residual mean=-0.000048 rms=0.002209 Jy/beam
! Combined flux in latest and established models = 0.182108 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.182108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083307Jy  sigma=1.753289
! Fit after  self-cal, rms=0.078021Jy  sigma=1.644338
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017748 Jy
! Component: 100  -  total flux cleaned = 0.0276694 Jy
! Total flux subtracted in 100 components = 0.0276694 Jy
! Clean residual min=-0.005606 max=0.009315 Jy/beam
! Clean residual mean=-0.000029 rms=0.001496 Jy/beam
! Combined flux in latest and established models = 0.209778 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 43 components and 0.209778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072447Jy  sigma=1.506236
! Fit after  self-cal, rms=0.072231Jy  sigma=1.501433
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.345 mas, bmaj=7.349 mas, bpa=-1.768 degrees
! Estimated noise=0.396083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127284 Jy
! Component: 100  -  total flux cleaned = 0.0215311 Jy
! Component: 150  -  total flux cleaned = 0.0280613 Jy
! Component: 200  -  total flux cleaned = 0.0330012 Jy
! Total flux subtracted in 200 components = 0.0330012 Jy
! Clean residual min=-0.004887 max=0.006466 Jy/beam
! Clean residual mean=-0.000017 rms=0.001400 Jy/beam
! Combined flux in latest and established models = 0.242779 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 71 components and 0.242779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069525Jy  sigma=1.431405
! Fit after  self-cal, rms=0.069495Jy  sigma=1.430493
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.345 x 7.349 at -1.768 degrees (North through East)
! Clean map  min=-0.0048819  max=0.11191 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.91     HN        0.99     KP        0.98     
!   LA        0.96     MK        1.09     NL        1.04     OV        0.95     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.73     FD        0.89     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.07     NL        1.01     OV        0.82     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.90     HN        1.02     KP        1.03     
!   LA        0.98     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.069495Jy  sigma=1.430493
! Fit after  self-cal, rms=0.073868Jy  sigma=1.360975
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.367 mas, bmaj=7.539 mas, bpa=-1.503 degrees
! Estimated noise=0.400487 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (51.5, -32.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243763 Jy
! Component: 100  -  total flux cleaned = 0.00202709 Jy
! Component: 150  -  total flux cleaned = 0.00176265 Jy
! Component: 200  -  total flux cleaned = 0.00153243 Jy
! Total flux subtracted in 200 components = 0.00153243 Jy
! Clean residual min=-0.003678 max=0.003827 Jy/beam
! Clean residual mean=-0.000007 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.244312 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 95 components and 0.244311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073515Jy  sigma=1.354537
! Fit after  self-cal, rms=0.073640Jy  sigma=1.353503
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073640Jy  sigma=1.353503
! Fit after  self-cal, rms=0.082341Jy  sigma=1.345156
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.351 mas, bmaj=7.57 mas, bpa=-1.589 degrees
! Estimated noise=0.406983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182723 Jy
! Component: 100  -  total flux cleaned = 0.00175892 Jy
! Component: 150  -  total flux cleaned = 0.00155251 Jy
! Component: 200  -  total flux cleaned = 0.00142378 Jy
! Total flux subtracted in 200 components = 0.00142378 Jy
! Clean residual min=-0.002971 max=0.002980 Jy/beam
! Clean residual mean=-0.000005 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.245735 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.245735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082168Jy  sigma=1.342533
! Fit after  self-cal, rms=0.082226Jy  sigma=1.342396
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138959 Jy
! Component: 100  -  total flux cleaned = -0.000256405 Jy
! Component: 150  -  total flux cleaned = -0.00041948 Jy
! Component: 200  -  total flux cleaned = -0.000468465 Jy
! Total flux subtracted in 200 components = -0.000468465 Jy
! Clean residual min=-0.002879 max=0.002935 Jy/beam
! Clean residual mean=-0.000006 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.245267 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 113 components and 0.245267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082133Jy  sigma=1.341055
! Fit after  self-cal, rms=0.082129Jy  sigma=1.341014
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082129Jy  sigma=1.341014
! Fit after  self-cal, rms=0.084332Jy  sigma=1.324872
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.355 mas, bmaj=7.549 mas, bpa=-1.512 degrees
! Estimated noise=0.407298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332567 Jy
! Component: 100  -  total flux cleaned = 0.000379534 Jy
! Component: 150  -  total flux cleaned = 0.000425771 Jy
! Component: 200  -  total flux cleaned = 0.00046786 Jy
! Total flux subtracted in 200 components = 0.00046786 Jy
! Clean residual min=-0.002078 max=0.002041 Jy/beam
! Clean residual mean=-0.000006 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.245735 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 127 components and 0.245735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084278Jy  sigma=1.323695
! Fit after  self-cal, rms=0.084284Jy  sigma=1.323567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000135946 Jy
! Component: 100  -  total flux cleaned = -0.00013529 Jy
! Component: 150  -  total flux cleaned = -0.000134976 Jy
! Component: 200  -  total flux cleaned = -0.000169353 Jy
! Total flux subtracted in 200 components = -0.000169353 Jy
! Clean residual min=-0.002018 max=0.001986 Jy/beam
! Clean residual mean=-0.000006 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.245565 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 135 components and 0.245565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084250Jy  sigma=1.322817
! Fit after  self-cal, rms=0.084250Jy  sigma=1.322797
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084250Jy  sigma=1.322797
! Fit after  self-cal, rms=0.084637Jy  sigma=1.322703
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.263 mas, bmaj=11.39 mas, bpa=-6.4 degrees
! Estimated noise=0.516501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402676 Jy
! Component: 100  -  total flux cleaned = 0.000580172 Jy
! Component: 150  -  total flux cleaned = 0.000558551 Jy
! Component: 200  -  total flux cleaned = 0.000576254 Jy
! Total flux subtracted in 200 components = 0.000576254 Jy
! Clean residual min=-0.002261 max=0.002041 Jy/beam
! Clean residual mean=-0.000011 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.246142 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 158 components and 0.246142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084624Jy  sigma=1.322547
! Fit after  self-cal, rms=0.084622Jy  sigma=1.322526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.5209e-05 Jy
! Component: 100  -  total flux cleaned = 5.98534e-05 Jy
! Component: 150  -  total flux cleaned = 9.24023e-05 Jy
! Component: 200  -  total flux cleaned = 0.000122164 Jy
! Total flux subtracted in 200 components = 0.000122164 Jy
! Clean residual min=-0.002222 max=0.002017 Jy/beam
! Clean residual mean=-0.000011 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.246264 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 166 components and 0.246264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084612Jy  sigma=1.322473
! Fit after  self-cal, rms=0.084609Jy  sigma=1.322463
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.355 mas, bmaj=7.54 mas, bpa=-1.429 degrees
! Estimated noise=0.408066 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.355 x 7.54 at -1.429 degrees (North through East)
! Clean map  min=-0.0019509  max=0.11315 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.8 mas, bmaj=6.735 mas, bpa=-2.655 degrees
! Estimated noise=0.585303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102084 Jy
! Component: 100  -  total flux cleaned = 0.150166 Jy
! Component: 150  -  total flux cleaned = 0.175601 Jy
! Component: 200  -  total flux cleaned = 0.191991 Jy
! Total flux subtracted in 200 components = 0.191991 Jy
! Clean residual min=-0.004250 max=0.008915 Jy/beam
! Clean residual mean=-0.000037 rms=0.001204 Jy/beam
! Combined flux in latest and established models = 0.191991 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.191991 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.355 mas, bmaj=7.54 mas, bpa=-1.429 degrees
! Estimated noise=0.408066 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162765 Jy
! Component: 100  -  total flux cleaned = 0.0266305 Jy
! Component: 150  -  total flux cleaned = 0.0335437 Jy
! Component: 200  -  total flux cleaned = 0.0382842 Jy
! Total flux subtracted in 200 components = 0.0382842 Jy
! Clean residual min=-0.002494 max=0.002781 Jy/beam
! Clean residual mean=-0.000022 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.230276 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 59 components and 0.230276 Jy
! Inverting map 
! Added new window around map position (-29, 28.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00355429 Jy
! Component: 100  -  total flux cleaned = 0.00629889 Jy
! Component: 150  -  total flux cleaned = 0.0084736 Jy
! Component: 200  -  total flux cleaned = 0.010226 Jy
! Total flux subtracted in 200 components = 0.010226 Jy
! Clean residual min=-0.002043 max=0.002261 Jy/beam
! Clean residual mean=-0.000012 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.240502 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 88 components and 0.240502 Jy
! Inverting map 
! Added new window around map position (-48.5, 45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020001 Jy
! Component: 100  -  total flux cleaned = 0.0027916 Jy
! Component: 150  -  total flux cleaned = 0.00325002 Jy
! Component: 200  -  total flux cleaned = 0.00366998 Jy
! Total flux subtracted in 200 components = 0.00366998 Jy
! Clean residual min=-0.001864 max=0.002058 Jy/beam
! Clean residual mean=-0.000010 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.244172 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 106 components and 0.244172 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.263 mas, bmaj=11.39 mas, bpa=-6.4 degrees
! Estimated noise=0.516501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177969 Jy
! Component: 100  -  total flux cleaned = 0.00220402 Jy
! Component: 150  -  total flux cleaned = 0.00231218 Jy
! Component: 200  -  total flux cleaned = 0.00237408 Jy
! Total flux subtracted in 200 components = 0.00237408 Jy
! Clean residual min=-0.001892 max=0.002150 Jy/beam
! Clean residual mean=-0.000016 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.246546 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.15715e-05 Jy
! Component: 100  -  total flux cleaned = 0.000155509 Jy
! Component: 150  -  total flux cleaned = 0.000244584 Jy
! Component: 200  -  total flux cleaned = 0.000304565 Jy
! Total flux subtracted in 200 components = 0.000304565 Jy
! Clean residual min=-0.001862 max=0.002119 Jy/beam
! Clean residual mean=-0.000014 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.24685 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 146 components and 0.24685 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.355 mas, bmaj=7.54 mas, bpa=-1.429 degrees
! Estimated noise=0.408066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.8171e-05 Jy
! Component: 100  -  total flux cleaned = 8.91449e-05 Jy
! Component: 150  -  total flux cleaned = 5.80257e-05 Jy
! Component: 200  -  total flux cleaned = 5.84217e-05 Jy
! Total flux subtracted in 200 components = 5.84217e-05 Jy
! Clean residual min=-0.001660 max=0.001856 Jy/beam
! Clean residual mean=-0.000006 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.246909 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 166 components and 0.246909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084464Jy  sigma=1.318556
! Fit after  self-cal, rms=0.084422Jy  sigma=1.318182
wmodel J1001+1015_S_map.mod
! Writing 166 model components to file: J1001+1015_S_map.mod
wobs   J1001+1015_S_uvs.fits
! Writing UV FITS file: J1001+1015_S_uvs.fits
wwins  J1001+1015_S_map.win
! wwins: Wrote 5 windows to J1001+1015_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334393 Jy
! Component: 100  -  total flux cleaned = 0.000427028 Jy
! Component: 150  -  total flux cleaned = 0.000544881 Jy
! Component: 200  -  total flux cleaned = 0.000742024 Jy
! Component: 250  -  total flux cleaned = 0.00087985 Jy
! Component: 300  -  total flux cleaned = 0.000986344 Jy
! Component: 350  -  total flux cleaned = 0.000907807 Jy
! Component: 400  -  total flux cleaned = 0.00085664 Jy
! Component: 450  -  total flux cleaned = 0.000831453 Jy
! Component: 500  -  total flux cleaned = 0.000782355 Jy
! Component: 550  -  total flux cleaned = 0.00073439 Jy
! Component: 600  -  total flux cleaned = 0.000663132 Jy
! Component: 650  -  total flux cleaned = 0.00061631 Jy
! Component: 700  -  total flux cleaned = 0.00061626 Jy
! Component: 750  -  total flux cleaned = 0.000547831 Jy
! Component: 800  -  total flux cleaned = 0.000547247 Jy
! Component: 850  -  total flux cleaned = 0.00043749 Jy
! Component: 900  -  total flux cleaned = 0.000481245 Jy
! Component: 950  -  total flux cleaned = 0.000524353 Jy
! Component: 1000  -  total flux cleaned = 0.00050318 Jy
! Component: 1050  -  total flux cleaned = 0.000503138 Jy
! Component: 1100  -  total flux cleaned = 0.000461918 Jy
! Component: 1150  -  total flux cleaned = 0.000523492 Jy
! Component: 1200  -  total flux cleaned = 0.000523194 Jy
! Component: 1250  -  total flux cleaned = 0.000582963 Jy
! Component: 1300  -  total flux cleaned = 0.000523217 Jy
! Component: 1350  -  total flux cleaned = 0.000562698 Jy
! Component: 1400  -  total flux cleaned = 0.000621223 Jy
! Component: 1450  -  total flux cleaned = 0.000621202 Jy
! Component: 1500  -  total flux cleaned = 0.000639887 Jy
! Component: 1550  -  total flux cleaned = 0.00060208 Jy
! Component: 1600  -  total flux cleaned = 0.000639422 Jy
! Component: 1650  -  total flux cleaned = 0.000620845 Jy
! Component: 1700  -  total flux cleaned = 0.000694514 Jy
! Component: 1750  -  total flux cleaned = 0.000694507 Jy
! Component: 1800  -  total flux cleaned = 0.00071267 Jy
! Component: 1850  -  total flux cleaned = 0.000730345 Jy
! Component: 1900  -  total flux cleaned = 0.000783639 Jy
! Component: 1950  -  total flux cleaned = 0.000713349 Jy
! Component: 2000  -  total flux cleaned = 0.000800545 Jy
! Component: 2050  -  total flux cleaned = 0.000766019 Jy
! Component: 2100  -  total flux cleaned = 0.000783165 Jy
! Component: 2150  -  total flux cleaned = 0.000800404 Jy
! Component: 2200  -  total flux cleaned = 0.000867982 Jy
! Component: 2250  -  total flux cleaned = 0.000867787 Jy
! Component: 2300  -  total flux cleaned = 0.000834575 Jy
! Component: 2350  -  total flux cleaned = 0.000933497 Jy
! Component: 2400  -  total flux cleaned = 0.000933359 Jy
! Component: 2450  -  total flux cleaned = 0.000965668 Jy
! Component: 2500  -  total flux cleaned = 0.000965798 Jy
! Component: 2550  -  total flux cleaned = 0.000981805 Jy
! Component: 2600  -  total flux cleaned = 0.00101359 Jy
! Component: 2650  -  total flux cleaned = 0.000934681 Jy
! Component: 2700  -  total flux cleaned = 0.000997383 Jy
! Component: 2750  -  total flux cleaned = 0.00102847 Jy
! Component: 2800  -  total flux cleaned = 0.000966677 Jy
! Component: 2850  -  total flux cleaned = 0.00105877 Jy
! Component: 2900  -  total flux cleaned = 0.0010585 Jy
! Component: 2950  -  total flux cleaned = 0.00102822 Jy
! Component: 3000  -  total flux cleaned = 0.00101307 Jy
! Component: 3050  -  total flux cleaned = 0.000968207 Jy
! Component: 3100  -  total flux cleaned = 0.000938575 Jy
! Component: 3150  -  total flux cleaned = 0.000953598 Jy
! Component: 3200  -  total flux cleaned = 0.000982855 Jy
! Component: 3250  -  total flux cleaned = 0.000982829 Jy
! Component: 3300  -  total flux cleaned = 0.00102623 Jy
! Component: 3350  -  total flux cleaned = 0.000997293 Jy
! Component: 3400  -  total flux cleaned = 0.000926007 Jy
! Component: 3450  -  total flux cleaned = 0.000940197 Jy
! Component: 3500  -  total flux cleaned = 0.000982521 Jy
! Component: 3550  -  total flux cleaned = 0.000954504 Jy
! Component: 3600  -  total flux cleaned = 0.00094064 Jy
! Component: 3650  -  total flux cleaned = 0.000899149 Jy
! Component: 3700  -  total flux cleaned = 0.000940647 Jy
! Component: 3750  -  total flux cleaned = 0.000926856 Jy
! Component: 3800  -  total flux cleaned = 0.000858726 Jy
! Component: 3850  -  total flux cleaned = 0.000831456 Jy
! Component: 3900  -  total flux cleaned = 0.000696565 Jy
! Component: 3950  -  total flux cleaned = 0.000790513 Jy
! Component: 4000  -  total flux cleaned = 0.00076366 Jy
! Component: 4050  -  total flux cleaned = 0.000737146 Jy
! Total flux subtracted in 4096 components = 0.000710747 Jy
! Clean residual min=-0.000800 max=0.000949 Jy/beam
! Clean residual mean=-0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.247619 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 474 components and 0.247619 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1001+1015_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.355 x 7.54 at -1.429 degrees (North through East)
! Clean map  min=-0.0015826  max=0.11569 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1001+1015_S_map.fits
wmodel /vlbi/uf001/uva//J1001+1015_S_map.mod
! Writing 474 model components to file: /vlbi/uf001/uva//J1001+1015_S_map.mod
wobs   /vlbi/uf001/uva//J1001+1015_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1001+1015_S_uvs.fits
wwins  /vlbi/uf001/uva//J1001+1015_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1001+1015_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.115695 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000246225 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.63847 0.63847 1.27694 2.55388 5.10776 10.2155 20.4311 40.8621 81.7242
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.115 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  469.872 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1001+1015_S_dfm.log closed on Mon Jan 14 00:42:13 2019