! Started logfile: /vlbi/uf001/uvm//J0958+6533_X_b_dfm.log on Sun Jan 13 21:18:21 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0958+6533_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0958+6533_X_b_uvm.fits ! AN table 1: 6 integrations on 36 of 36 possible baselines. ! AN table 2: 5 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.850467 visibilities/baseline/integration-bin. ! Found source: J0958+6533 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 3276 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0958+6533_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 13 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.188856Jy sigma=20.870405 ! Fit after self-cal, rms=0.370258Jy sigma=6.795123 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7011 mas, bmaj=1.477 mas, bpa=-40.06 degrees ! Estimated noise=1.20214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.484933 Jy ! Component: 100 - total flux cleaned = 0.61597 Jy ! Total flux subtracted in 100 components = 0.61597 Jy ! Clean residual min=-0.029760 max=0.055735 Jy/beam ! Clean residual mean=-0.000183 rms=0.007930 Jy/beam ! Combined flux in latest and established models = 0.61597 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.61597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141726Jy sigma=2.414220 ! Fit after self-cal, rms=0.141649Jy sigma=2.413062 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611913 Jy ! Component: 100 - total flux cleaned = 0.0932599 Jy ! Total flux subtracted in 100 components = 0.0932599 Jy ! Clean residual min=-0.026318 max=0.029816 Jy/beam ! Clean residual mean=-0.000119 rms=0.005746 Jy/beam ! Combined flux in latest and established models = 0.70923 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.70923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103381Jy sigma=1.801030 ! Fit after self-cal, rms=0.103261Jy sigma=1.799036 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8784 mas, bmaj=1.804 mas, bpa=-44.43 degrees ! Estimated noise=0.804286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260161 Jy ! Component: 100 - total flux cleaned = 0.03956 Jy ! Component: 150 - total flux cleaned = 0.0476907 Jy ! Component: 200 - total flux cleaned = 0.0526199 Jy ! Total flux subtracted in 200 components = 0.0526199 Jy ! Clean residual min=-0.031604 max=0.033215 Jy/beam ! Clean residual mean=-0.000305 rms=0.006231 Jy/beam ! Combined flux in latest and established models = 0.76185 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.76185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095884Jy sigma=1.694331 ! Fit after self-cal, rms=0.095856Jy sigma=1.693918 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8784 x 1.804 at -44.43 degrees (North through East) ! Clean map min=-0.030423 max=0.64096 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.91 KP 1.04 ! LA 0.82 MK 1.06 NL 1.23 OV 0.96 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.94 KP 1.01 LA 0.98 ! MK 0.96 NL 1.15 PT 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.98 HN 0.92 KP 1.03 ! LA 0.87 MK 1.05 NL 1.23 OV 0.96 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 0.95 KP 1.00 LA 1.01 ! MK 0.97 NL 1.12 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 0.90 KP 1.03 ! LA 0.87 MK 1.03 NL 1.23 OV 1.00 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.95 KP 1.00 LA 0.98 ! MK 0.98 NL 1.13 PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.99 HN 0.93 KP 1.04 ! LA 0.88 MK 1.01 NL 1.24 OV 0.98 ! PT 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 0.95 KP 0.99 LA 0.97 ! MK 0.98 NL 1.16 PT 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.90 KP 1.02 ! LA 0.85 MK 1.03 NL 1.22 OV 0.95 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.93 KP 1.01 LA 1.00 ! MK 0.95 NL 1.14 PT 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 0.92 KP 1.01 ! LA 0.83 MK 1.02 NL 1.23 OV 0.99 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.90 KP 0.98 LA 1.00 ! MK 0.98 NL 1.13 PT 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 0.91 KP 1.05 ! LA 0.83 MK 1.03 NL 1.23 OV 0.98 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.94 KP 1.00 LA 1.00 ! MK 0.94 NL 1.16 PT 0.90 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 0.93 KP 1.04 ! LA 0.84 MK 1.04 NL 1.22 OV 0.98 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.94 KP 1.01 LA 0.97 ! MK 1.02 NL 1.13 PT 0.92 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 0.94 KP 1.03 ! LA 0.84 MK 1.03 NL 1.20 OV 0.96 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.95 KP 0.97 LA 0.98 ! MK 1.02 NL 1.13 PT 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.91 KP 1.04 ! LA 0.85 MK 1.03 NL 1.20 OV 0.94 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.95 KP 1.00 LA 1.01 ! MK 1.00 NL 1.14 PT 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 0.93 KP 1.04 ! LA 0.86 MK 1.01 NL 1.20 OV 0.96 ! PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.95 KP 0.97 LA 1.00 ! MK 0.98 NL 1.17 PT 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.92 KP 1.04 ! LA 0.88 MK 1.04 NL 1.21 OV 0.97 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.91 KP 0.99 LA 1.00 ! MK 0.97 NL 1.13 PT 0.93 ! ! ! Fit before self-cal, rms=0.095856Jy sigma=1.693918 ! Fit after self-cal, rms=0.055482Jy sigma=0.962774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8807 mas, bmaj=1.784 mas, bpa=-44.23 degrees ! Estimated noise=0.80217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627546 Jy ! Component: 100 - total flux cleaned = 0.00666605 Jy ! Component: 150 - total flux cleaned = 0.00724828 Jy ! Component: 200 - total flux cleaned = 0.00781219 Jy ! Total flux subtracted in 200 components = 0.00781219 Jy ! Clean residual min=-0.003984 max=0.005002 Jy/beam ! Clean residual mean=-0.000012 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.769662 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.769662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054224Jy sigma=0.941768 ! Fit after self-cal, rms=0.054226Jy sigma=0.939974 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054226Jy sigma=0.939974 ! Fit after self-cal, rms=0.054032Jy sigma=0.938709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8804 mas, bmaj=1.783 mas, bpa=-44.18 degrees ! Estimated noise=0.800596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167587 Jy ! Component: 100 - total flux cleaned = 0.00251734 Jy ! Component: 150 - total flux cleaned = 0.00294696 Jy ! Component: 200 - total flux cleaned = 0.00302155 Jy ! Total flux subtracted in 200 components = 0.00302155 Jy ! Clean residual min=-0.003439 max=0.003591 Jy/beam ! Clean residual mean=-0.000010 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.772684 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.772684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053699Jy sigma=0.933122 ! Fit after self-cal, rms=0.053676Jy sigma=0.932637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561758 Jy ! Component: 100 - total flux cleaned = 0.000895408 Jy ! Component: 150 - total flux cleaned = 0.000892578 Jy ! Component: 200 - total flux cleaned = 0.000942782 Jy ! Total flux subtracted in 200 components = 0.000942782 Jy ! Clean residual min=-0.003389 max=0.003240 Jy/beam ! Clean residual mean=-0.000009 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.773627 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.773627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053539Jy sigma=0.930411 ! Fit after self-cal, rms=0.053533Jy sigma=0.930221 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053533Jy sigma=0.930221 ! Fit after self-cal, rms=0.053471Jy sigma=0.929766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8805 mas, bmaj=1.782 mas, bpa=-44.12 degrees ! Estimated noise=0.800057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474298 Jy ! Component: 100 - total flux cleaned = 0.00094841 Jy ! Component: 150 - total flux cleaned = 0.000902117 Jy ! Component: 200 - total flux cleaned = 0.000901864 Jy ! Total flux subtracted in 200 components = 0.000901864 Jy ! Clean residual min=-0.003333 max=0.003127 Jy/beam ! Clean residual mean=-0.000008 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.774529 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.774529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053380Jy sigma=0.928258 ! Fit after self-cal, rms=0.053377Jy sigma=0.928130 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338356 Jy ! Component: 100 - total flux cleaned = 0.000413861 Jy ! Component: 150 - total flux cleaned = 0.00048057 Jy ! Component: 200 - total flux cleaned = 0.000481422 Jy ! Total flux subtracted in 200 components = 0.000481422 Jy ! Clean residual min=-0.003311 max=0.003156 Jy/beam ! Clean residual mean=-0.000008 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.77501 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 69 components and 0.77501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053331Jy sigma=0.927367 ! Fit after self-cal, rms=0.053330Jy sigma=0.927304 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053330Jy sigma=0.927304 ! Fit after self-cal, rms=0.053312Jy sigma=0.927151 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=3.375 mas, bpa=-58.47 degrees ! Estimated noise=1.05445 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000516433 Jy ! Component: 100 - total flux cleaned = 0.00051096 Jy ! Component: 150 - total flux cleaned = 0.000478908 Jy ! Component: 200 - total flux cleaned = 0.000503205 Jy ! Total flux subtracted in 200 components = 0.000503205 Jy ! Clean residual min=-0.004816 max=0.003906 Jy/beam ! Clean residual mean=-0.000018 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.775513 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 75 components and 0.775513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053294Jy sigma=0.926764 ! Fit after self-cal, rms=0.053293Jy sigma=0.926689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157163 Jy ! Component: 100 - total flux cleaned = 0.000201842 Jy ! Component: 150 - total flux cleaned = 0.000221913 Jy ! Component: 200 - total flux cleaned = 0.000240259 Jy ! Total flux subtracted in 200 components = 0.000240259 Jy ! Clean residual min=-0.004776 max=0.003831 Jy/beam ! Clean residual mean=-0.000017 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.775754 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.775754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053287Jy sigma=0.926596 ! Fit after self-cal, rms=0.053288Jy sigma=0.926564 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=1.782 mas, bpa=-44.08 degrees ! Estimated noise=0.799896 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8808 x 1.782 at -44.08 degrees (North through East) ! Clean map min=-0.0029618 max=0.63786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053288Jy sigma=0.926564 ! Fit after self-cal, rms=0.049938Jy sigma=0.855549 ! Inverting map and beam ! Estimated beam: bmin=0.8805 mas, bmaj=1.782 mas, bpa=-44.09 degrees ! Estimated noise=0.799677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000993848 Jy ! Component: 100 - total flux cleaned = -0.00103268 Jy ! Component: 150 - total flux cleaned = -0.00103432 Jy ! Component: 200 - total flux cleaned = -0.00101015 Jy ! Total flux subtracted in 200 components = -0.00101015 Jy ! Clean residual min=-0.002988 max=0.003189 Jy/beam ! Clean residual mean=-0.000005 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.774744 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.774743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049903Jy sigma=0.854760 ! Fit after self-cal, rms=0.049901Jy sigma=0.854721 ! Inverting map ! Added new window around map position (21.8, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202149 Jy ! Component: 100 - total flux cleaned = 0.00196821 Jy ! Component: 150 - total flux cleaned = 0.00200077 Jy ! Component: 200 - total flux cleaned = 0.00207038 Jy ! Total flux subtracted in 200 components = 0.00207038 Jy ! Clean residual min=-0.002978 max=0.003027 Jy/beam ! Clean residual mean=-0.000005 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.776814 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.776814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049753Jy sigma=0.851767 ! Fit after self-cal, rms=0.049748Jy sigma=0.851649 ! Inverting map ! Added new window around map position (27.4, -41.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220671 Jy ! Component: 100 - total flux cleaned = 0.00264556 Jy ! Component: 150 - total flux cleaned = 0.00297878 Jy ! Component: 200 - total flux cleaned = 0.00316845 Jy ! Total flux subtracted in 200 components = 0.00316845 Jy ! Clean residual min=-0.002719 max=0.002525 Jy/beam ! Clean residual mean=-0.000010 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.779982 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 123 components and 0.779982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049607Jy sigma=0.849212 ! Fit after self-cal, rms=0.049603Jy sigma=0.849102 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049603Jy sigma=0.849102 ! Fit after self-cal, rms=0.049563Jy sigma=0.848720 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7014 mas, bmaj=1.457 mas, bpa=-39.54 degrees ! Estimated noise=1.19113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.480399 Jy ! Component: 100 - total flux cleaned = 0.611773 Jy ! Component: 150 - total flux cleaned = 0.674086 Jy ! Component: 200 - total flux cleaned = 0.706478 Jy ! Total flux subtracted in 200 components = 0.706478 Jy ! Clean residual min=-0.009385 max=0.015847 Jy/beam ! Clean residual mean=-0.000043 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.706478 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.706478 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=1.782 mas, bpa=-44.07 degrees ! Estimated noise=0.79945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226803 Jy ! Component: 100 - total flux cleaned = 0.0355153 Jy ! Component: 150 - total flux cleaned = 0.0440414 Jy ! Component: 200 - total flux cleaned = 0.0500813 Jy ! Total flux subtracted in 200 components = 0.0500813 Jy ! Clean residual min=-0.004068 max=0.004455 Jy/beam ! Clean residual mean=-0.000040 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.756559 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 38 components and 0.756559 Jy ! Inverting map ! Added new window around map position (-0.2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475267 Jy ! Component: 100 - total flux cleaned = 0.00837541 Jy ! Component: 150 - total flux cleaned = 0.0113093 Jy ! Component: 200 - total flux cleaned = 0.0135087 Jy ! Total flux subtracted in 200 components = 0.0135087 Jy ! Clean residual min=-0.003454 max=0.003020 Jy/beam ! Clean residual mean=-0.000022 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.770068 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 57 components and 0.770068 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.233 mas, bmaj=3.375 mas, bpa=-58.43 degrees ! Estimated noise=1.05338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306302 Jy ! Component: 100 - total flux cleaned = 0.00476489 Jy ! Component: 150 - total flux cleaned = 0.00593742 Jy ! Component: 200 - total flux cleaned = 0.00674613 Jy ! Total flux subtracted in 200 components = 0.00674613 Jy ! Clean residual min=-0.004574 max=0.003334 Jy/beam ! Clean residual mean=-0.000024 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.776814 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588175 Jy ! Component: 100 - total flux cleaned = 0.00115747 Jy ! Component: 150 - total flux cleaned = 0.00161587 Jy ! Component: 200 - total flux cleaned = 0.00206546 Jy ! Total flux subtracted in 200 components = 0.00206546 Jy ! Clean residual min=-0.004340 max=0.003148 Jy/beam ! Clean residual mean=-0.000018 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.778879 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 113 components and 0.778879 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8808 mas, bmaj=1.782 mas, bpa=-44.07 degrees ! Estimated noise=0.79945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000822343 Jy ! Component: 100 - total flux cleaned = 0.00119807 Jy ! Component: 150 - total flux cleaned = 0.00119651 Jy ! Component: 200 - total flux cleaned = 0.00129638 Jy ! Total flux subtracted in 200 components = 0.00129638 Jy ! Clean residual min=-0.002868 max=0.002624 Jy/beam ! Clean residual mean=-0.000008 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.780176 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 130 components and 0.780176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049618Jy sigma=0.850073 ! Fit after self-cal, rms=0.049605Jy sigma=0.849858 wmodel J0958+6533_X_b_map.mod ! Writing 130 model components to file: J0958+6533_X_b_map.mod wobs J0958+6533_X_b_uvs.fits ! Writing UV FITS file: J0958+6533_X_b_uvs.fits wwins J0958+6533_X_b_map.win ! wwins: Wrote 5 windows to J0958+6533_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000786264 Jy ! Component: 100 - total flux cleaned = -0.00106469 Jy ! Component: 150 - total flux cleaned = -0.0013261 Jy ! Component: 200 - total flux cleaned = -0.00157491 Jy ! Component: 250 - total flux cleaned = -0.00173297 Jy ! Component: 300 - total flux cleaned = -0.00177042 Jy ! Component: 350 - total flux cleaned = -0.00199456 Jy ! Component: 400 - total flux cleaned = -0.00210272 Jy ! Component: 450 - total flux cleaned = -0.00220854 Jy ! Component: 500 - total flux cleaned = -0.00237994 Jy ! Component: 550 - total flux cleaned = -0.00241367 Jy ! Component: 600 - total flux cleaned = -0.00251117 Jy ! Component: 650 - total flux cleaned = -0.00257488 Jy ! Component: 700 - total flux cleaned = -0.00266928 Jy ! Component: 750 - total flux cleaned = -0.00285207 Jy ! Component: 800 - total flux cleaned = -0.0029417 Jy ! Component: 850 - total flux cleaned = -0.00311754 Jy ! Component: 900 - total flux cleaned = -0.00311734 Jy ! Component: 950 - total flux cleaned = -0.00323077 Jy ! Component: 1000 - total flux cleaned = -0.00323103 Jy ! Component: 1050 - total flux cleaned = -0.00323155 Jy ! Component: 1100 - total flux cleaned = -0.00333888 Jy ! Component: 1150 - total flux cleaned = -0.00339114 Jy ! Component: 1200 - total flux cleaned = -0.00331254 Jy ! Component: 1250 - total flux cleaned = -0.00331254 Jy ! Component: 1300 - total flux cleaned = -0.00326208 Jy ! Component: 1350 - total flux cleaned = -0.00328714 Jy ! Component: 1400 - total flux cleaned = -0.00333543 Jy ! Component: 1450 - total flux cleaned = -0.00328722 Jy ! Component: 1500 - total flux cleaned = -0.00331102 Jy ! Component: 1550 - total flux cleaned = -0.00328758 Jy ! Component: 1600 - total flux cleaned = -0.00324129 Jy ! Component: 1650 - total flux cleaned = -0.00324142 Jy ! Component: 1700 - total flux cleaned = -0.00319667 Jy ! Component: 1750 - total flux cleaned = -0.00321915 Jy ! Component: 1800 - total flux cleaned = -0.00319722 Jy ! Component: 1850 - total flux cleaned = -0.00311049 Jy ! Component: 1900 - total flux cleaned = -0.00308949 Jy ! Component: 1950 - total flux cleaned = -0.00308956 Jy ! Component: 2000 - total flux cleaned = -0.00302695 Jy ! Component: 2050 - total flux cleaned = -0.00300637 Jy ! Component: 2100 - total flux cleaned = -0.00300643 Jy ! Component: 2150 - total flux cleaned = -0.00292623 Jy ! Component: 2200 - total flux cleaned = -0.00288645 Jy ! Component: 2250 - total flux cleaned = -0.00284711 Jy ! Component: 2300 - total flux cleaned = -0.00282778 Jy ! Component: 2350 - total flux cleaned = -0.00278877 Jy ! Component: 2400 - total flux cleaned = -0.00269303 Jy ! Component: 2450 - total flux cleaned = -0.0026741 Jy ! Component: 2500 - total flux cleaned = -0.0026366 Jy ! Component: 2550 - total flux cleaned = -0.00259988 Jy ! Component: 2600 - total flux cleaned = -0.00254488 Jy ! Component: 2650 - total flux cleaned = -0.00252669 Jy ! Component: 2700 - total flux cleaned = -0.00249093 Jy ! Component: 2750 - total flux cleaned = -0.00241962 Jy ! Component: 2800 - total flux cleaned = -0.00250813 Jy ! Component: 2850 - total flux cleaned = -0.00242014 Jy ! Component: 2900 - total flux cleaned = -0.00247235 Jy ! Component: 2950 - total flux cleaned = -0.00240347 Jy ! Component: 3000 - total flux cleaned = -0.00242047 Jy ! Component: 3050 - total flux cleaned = -0.00242047 Jy ! Component: 3100 - total flux cleaned = -0.00240382 Jy ! Component: 3150 - total flux cleaned = -0.00248717 Jy ! Component: 3200 - total flux cleaned = -0.00243778 Jy ! Component: 3250 - total flux cleaned = -0.00253602 Jy ! Component: 3300 - total flux cleaned = -0.00255212 Jy ! Component: 3350 - total flux cleaned = -0.00255201 Jy ! Component: 3400 - total flux cleaned = -0.00255182 Jy ! Component: 3450 - total flux cleaned = -0.00261527 Jy ! Component: 3500 - total flux cleaned = -0.00264682 Jy ! Component: 3550 - total flux cleaned = -0.00266252 Jy ! Component: 3600 - total flux cleaned = -0.00266253 Jy ! Component: 3650 - total flux cleaned = -0.00272451 Jy ! Component: 3700 - total flux cleaned = -0.00284698 Jy ! Component: 3750 - total flux cleaned = -0.00281652 Jy ! Component: 3800 - total flux cleaned = -0.00289192 Jy ! Component: 3850 - total flux cleaned = -0.00284706 Jy ! Component: 3900 - total flux cleaned = -0.00290641 Jy ! Component: 3950 - total flux cleaned = -0.00293585 Jy ! Component: 4000 - total flux cleaned = -0.00292109 Jy ! Component: 4050 - total flux cleaned = -0.00292086 Jy ! Total flux subtracted in 4096 components = -0.00297877 Jy ! Clean residual min=-0.000801 max=0.000986 Jy/beam ! Clean residual mean=-0.000002 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.777197 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 398 components and 0.777197 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0958+6533_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8808 x 1.782 at -44.07 degrees (North through East) ! Clean map min=-0.0016252 max=0.63578 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0958+6533_X_b_map.fits wmodel /vlbi/uf001/uvm//J0958+6533_X_b_map.mod ! Writing 398 model components to file: /vlbi/uf001/uvm//J0958+6533_X_b_map.mod wobs /vlbi/uf001/uvm//J0958+6533_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0958+6533_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0958+6533_X_b_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0958+6533_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.635777 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000239523 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.113022 0.113022 0.226045 0.45209 0.90418 1.80836 3.61672 7.23344 14.4669 28.9338 57.8675 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.635 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2654.34 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0958+6533_X_b_dfm.log closed on Sun Jan 13 21:18:25 2019