! Started logfile: /vlbi/uf001/uvm//J0958+3224_X_b_dfm.log on Sun Jan 13 21:17:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0958+3224_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0958+3224_X_b_uvm.fits ! AN table 1: 11 integrations on 1 of 1 possible baselines. ! AN table 2: 9 integrations on 3 of 3 possible baselines. ! AN table 3: 5 integrations on 21 of 21 possible baselines. ! AN table 4: 10 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.839243 visibilities/baseline/integration-bin. ! Found source: J0958+3224 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 4260 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0958+3224_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 25 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.118660Jy sigma=20.891323 ! Fit after self-cal, rms=0.512862Jy sigma=9.521026 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8641 mas, bmaj=1.948 mas, bpa=-26.11 degrees ! Estimated noise=0.963976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.382627 Jy ! Component: 100 - total flux cleaned = 0.483216 Jy ! Total flux subtracted in 100 components = 0.483216 Jy ! Clean residual min=-0.021502 max=0.048703 Jy/beam ! Clean residual mean=0.000048 rms=0.005442 Jy/beam ! Combined flux in latest and established models = 0.483216 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.483216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117205Jy sigma=2.142777 ! Fit after self-cal, rms=0.116656Jy sigma=2.133929 ! Inverting map ! Added new window around map position (0.4, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531392 Jy ! Component: 100 - total flux cleaned = 0.0801439 Jy ! Total flux subtracted in 100 components = 0.0801439 Jy ! Clean residual min=-0.018390 max=0.018658 Jy/beam ! Clean residual mean=0.000027 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 0.563359 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.563359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086637Jy sigma=1.574812 ! Fit after self-cal, rms=0.085578Jy sigma=1.554721 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.13 mas, bmaj=2.162 mas, bpa=-22.22 degrees ! Estimated noise=0.693096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253589 Jy ! Component: 100 - total flux cleaned = 0.0401551 Jy ! Component: 150 - total flux cleaned = 0.0504 Jy ! Component: 200 - total flux cleaned = 0.0576869 Jy ! Total flux subtracted in 200 components = 0.0576869 Jy ! Clean residual min=-0.017151 max=0.017736 Jy/beam ! Clean residual mean=0.000017 rms=0.003729 Jy/beam ! Combined flux in latest and established models = 0.621046 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 38 components and 0.621046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076739Jy sigma=1.395565 ! Fit after self-cal, rms=0.076177Jy sigma=1.381718 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.13 x 2.162 at -22.22 degrees (North through East) ! Clean map min=-0.015896 max=0.50213 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 0.94 KP 1.02 LA 0.93 ! NL 1.11 OV 0.93 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.99 HN 0.96 KP 1.04 ! LA 1.02 MK 1.02 NL 1.06 OV 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 0.92 KP 1.01 LA 0.95 ! NL 1.12 OV 0.93 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.99 HN 0.97 KP 1.06 ! LA 1.00 MK 0.98 NL 1.03 OV 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.98 KP 1.01 LA 0.95 ! NL 1.11 OV 0.92 PT 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.99 HN 0.97 KP 1.05 ! LA 1.01 MK 1.02 NL 1.06 OV 0.88 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.94 KP 0.99 LA 0.96 ! NL 1.09 OV 0.92 PT 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.00 HN 0.94 KP 1.03 ! LA 0.99 MK 1.04 NL 1.07 OV 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 HN 0.97 KP 1.03 LA 0.96 ! NL 1.11 OV 0.93 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 0.99 HN 0.96 KP 1.06 ! LA 1.01 MK 1.03 NL 1.06 OV 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 HN 0.96 KP 1.00 LA 0.96 ! NL 1.11 OV 0.90 PT 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 1.00 HN 0.98 KP 1.04 ! LA 1.03 MK 0.99 NL 1.07 OV 0.90 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.96 KP 1.02 LA 0.97 ! NL 1.08 OV 0.94 PT 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 1.00 HN 0.97 KP 1.05 ! LA 1.02 MK 1.00 NL 1.04 OV 0.90 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 0.95 KP 1.06 LA 0.97 ! NL 1.10 OV 0.93 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 1.00 HN 0.98 KP 1.08 ! LA 1.00 MK 1.02 NL 1.05 OV 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.95 KP 1.04 LA 0.96 ! NL 1.10 OV 0.92 PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.97 HN 0.99 KP 1.06 ! LA 1.01 MK 1.04 NL 1.07 OV 0.90 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.98 KP 1.01 LA 0.96 ! NL 1.09 OV 0.93 PT 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.98 HN 0.96 KP 1.06 ! LA 0.99 MK 1.03 NL 1.08 OV 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 0.96 KP 1.00 LA 0.94 ! NL 1.10 OV 0.92 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.99 HN 0.97 KP 1.06 ! LA 1.03 MK 1.03 NL 1.04 OV 0.90 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 0.96 KP 0.99 LA 0.95 ! NL 1.11 OV 0.93 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.98 HN 1.02 KP 1.04 ! LA 1.02 MK 1.03 NL 1.06 OV 0.88 ! ! ! Fit before self-cal, rms=0.076177Jy sigma=1.381718 ! Fit after self-cal, rms=0.061950Jy sigma=1.122845 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.097 mas, bmaj=2.208 mas, bpa=-23.26 degrees ! Estimated noise=0.707898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00636617 Jy ! Component: 100 - total flux cleaned = 0.00641432 Jy ! Component: 150 - total flux cleaned = 0.0067702 Jy ! Component: 200 - total flux cleaned = 0.00709425 Jy ! Total flux subtracted in 200 components = 0.00709425 Jy ! Clean residual min=-0.008032 max=0.009992 Jy/beam ! Clean residual mean=0.000010 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 0.628141 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.628141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060899Jy sigma=1.104939 ! Fit after self-cal, rms=0.060909Jy sigma=1.102788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060909Jy sigma=1.102788 ! Fit after self-cal, rms=0.058643Jy sigma=1.032179 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.097 mas, bmaj=2.203 mas, bpa=-23.16 degrees ! Estimated noise=0.708328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408863 Jy ! Component: 100 - total flux cleaned = 0.00539935 Jy ! Component: 150 - total flux cleaned = 0.00568254 Jy ! Component: 200 - total flux cleaned = 0.00568734 Jy ! Total flux subtracted in 200 components = 0.00568734 Jy ! Clean residual min=-0.006259 max=0.007654 Jy/beam ! Clean residual mean=0.000007 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.633828 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.633828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058316Jy sigma=1.025912 ! Fit after self-cal, rms=0.058330Jy sigma=1.025105 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00810951 Jy ! Component: 100 - total flux cleaned = 0.0130166 Jy ! Component: 150 - total flux cleaned = 0.0150968 Jy ! Component: 200 - total flux cleaned = 0.0171007 Jy ! Total flux subtracted in 200 components = 0.0171007 Jy ! Clean residual min=-0.005074 max=0.005543 Jy/beam ! Clean residual mean=0.000002 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.650929 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 107 components and 0.650929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056924Jy sigma=0.997663 ! Fit after self-cal, rms=0.056864Jy sigma=0.996403 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056864Jy sigma=0.996403 ! Fit after self-cal, rms=0.056727Jy sigma=0.994469 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=2.202 mas, bpa=-23.19 degrees ! Estimated noise=0.708227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362151 Jy ! Component: 100 - total flux cleaned = 0.00573266 Jy ! Component: 150 - total flux cleaned = 0.00746925 Jy ! Component: 200 - total flux cleaned = 0.00901502 Jy ! Total flux subtracted in 200 components = 0.00901502 Jy ! Clean residual min=-0.004424 max=0.005487 Jy/beam ! Clean residual mean=0.000002 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.659944 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 124 components and 0.659944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056333Jy sigma=0.987180 ! Fit after self-cal, rms=0.056325Jy sigma=0.986704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580373 Jy ! Component: 100 - total flux cleaned = 0.00800132 Jy ! Component: 150 - total flux cleaned = 0.0103409 Jy ! Component: 200 - total flux cleaned = 0.0124885 Jy ! Total flux subtracted in 200 components = 0.0124885 Jy ! Clean residual min=-0.003948 max=0.003751 Jy/beam ! Clean residual mean=0.000004 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.672432 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 159 components and 0.672432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055584Jy sigma=0.970445 ! Fit after self-cal, rms=0.055564Jy sigma=0.969909 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055564Jy sigma=0.969909 ! Fit after self-cal, rms=0.055496Jy sigma=0.968956 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.176 mas, bmaj=2.752 mas, bpa=-18.12 degrees ! Estimated noise=0.836645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043716 Jy ! Component: 100 - total flux cleaned = 0.00767284 Jy ! Component: 150 - total flux cleaned = 0.010457 Jy ! Component: 200 - total flux cleaned = 0.0127865 Jy ! Total flux subtracted in 200 components = 0.0127865 Jy ! Clean residual min=-0.004012 max=0.004592 Jy/beam ! Clean residual mean=0.000006 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.685219 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 203 components and 0.685219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055204Jy sigma=0.963439 ! Fit after self-cal, rms=0.055182Jy sigma=0.962979 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253527 Jy ! Component: 100 - total flux cleaned = 0.00467012 Jy ! Component: 150 - total flux cleaned = 0.00655139 Jy ! Component: 200 - total flux cleaned = 0.00789128 Jy ! Total flux subtracted in 200 components = 0.00789128 Jy ! Clean residual min=-0.003827 max=0.004538 Jy/beam ! Clean residual mean=0.000005 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.69311 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 224 components and 0.69311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055064Jy sigma=0.961329 ! Fit after self-cal, rms=0.055056Jy sigma=0.961153 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=2.202 mas, bpa=-23.23 degrees ! Estimated noise=0.707942 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.096 x 2.202 at -23.23 degrees (North through East) ! Clean map min=-0.0032407 max=0.49857 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8554 mas, bmaj=1.968 mas, bpa=-26.14 degrees ! Estimated noise=0.982034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.379031 Jy ! Component: 100 - total flux cleaned = 0.485719 Jy ! Component: 150 - total flux cleaned = 0.537485 Jy ! Component: 200 - total flux cleaned = 0.564111 Jy ! Total flux subtracted in 200 components = 0.564111 Jy ! Clean residual min=-0.008157 max=0.013525 Jy/beam ! Clean residual mean=0.000024 rms=0.002219 Jy/beam ! Combined flux in latest and established models = 0.564112 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.564112 Jy ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=2.202 mas, bpa=-23.23 degrees ! Estimated noise=0.707942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235963 Jy ! Component: 100 - total flux cleaned = 0.0381432 Jy ! Component: 150 - total flux cleaned = 0.0489754 Jy ! Component: 200 - total flux cleaned = 0.0573262 Jy ! Total flux subtracted in 200 components = 0.0573262 Jy ! Clean residual min=-0.005777 max=0.005653 Jy/beam ! Clean residual mean=0.000014 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.621438 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 58 components and 0.621438 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.176 mas, bmaj=2.752 mas, bpa=-18.12 degrees ! Estimated noise=0.836645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117098 Jy ! Component: 100 - total flux cleaned = 0.0207556 Jy ! Component: 150 - total flux cleaned = 0.0282811 Jy ! Component: 200 - total flux cleaned = 0.0347214 Jy ! Total flux subtracted in 200 components = 0.0347214 Jy ! Clean residual min=-0.006143 max=0.005710 Jy/beam ! Clean residual mean=0.000016 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.656159 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559061 Jy ! Component: 100 - total flux cleaned = 0.0105028 Jy ! Component: 150 - total flux cleaned = 0.0148455 Jy ! Component: 200 - total flux cleaned = 0.018559 Jy ! Total flux subtracted in 200 components = 0.018559 Jy ! Clean residual min=-0.004895 max=0.004610 Jy/beam ! Clean residual mean=0.000011 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.674718 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 153 components and 0.674718 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=2.202 mas, bpa=-23.23 degrees ! Estimated noise=0.707942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275575 Jy ! Component: 100 - total flux cleaned = 0.00525116 Jy ! Component: 150 - total flux cleaned = 0.00758421 Jy ! Component: 200 - total flux cleaned = 0.00976886 Jy ! Total flux subtracted in 200 components = 0.00976886 Jy ! Clean residual min=-0.003759 max=0.003700 Jy/beam ! Clean residual mean=0.000005 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.684487 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 179 components and 0.684487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055360Jy sigma=0.965592 ! Fit after self-cal, rms=0.055310Jy sigma=0.964763 wmodel J0958+3224_X_b_map.mod ! Writing 179 model components to file: J0958+3224_X_b_map.mod wobs J0958+3224_X_b_uvs.fits ! Writing UV FITS file: J0958+3224_X_b_uvs.fits wwins J0958+3224_X_b_map.win ! wwins: Wrote 4 windows to J0958+3224_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.38416e-05 Jy ! Component: 100 - total flux cleaned = -0.000341049 Jy ! Component: 150 - total flux cleaned = -0.000857035 Jy ! Component: 200 - total flux cleaned = -0.000966696 Jy ! Component: 250 - total flux cleaned = -0.00112702 Jy ! Component: 300 - total flux cleaned = -0.00133436 Jy ! Component: 350 - total flux cleaned = -0.00163608 Jy ! Component: 400 - total flux cleaned = -0.00183164 Jy ! Component: 450 - total flux cleaned = -0.00192734 Jy ! Component: 500 - total flux cleaned = -0.00192722 Jy ! Component: 550 - total flux cleaned = -0.00197221 Jy ! Component: 600 - total flux cleaned = -0.00188247 Jy ! Component: 650 - total flux cleaned = -0.00179657 Jy ! Component: 700 - total flux cleaned = -0.00179731 Jy ! Component: 750 - total flux cleaned = -0.0017148 Jy ! Component: 800 - total flux cleaned = -0.00167504 Jy ! Component: 850 - total flux cleaned = -0.00151755 Jy ! Component: 900 - total flux cleaned = -0.00151798 Jy ! Component: 950 - total flux cleaned = -0.00140387 Jy ! Component: 1000 - total flux cleaned = -0.00132998 Jy ! Component: 1050 - total flux cleaned = -0.00140377 Jy ! Component: 1100 - total flux cleaned = -0.00140358 Jy ! Component: 1150 - total flux cleaned = -0.00143818 Jy ! Component: 1200 - total flux cleaned = -0.00129837 Jy ! Component: 1250 - total flux cleaned = -0.00140145 Jy ! Component: 1300 - total flux cleaned = -0.00129849 Jy ! Component: 1350 - total flux cleaned = -0.00133051 Jy ! Component: 1400 - total flux cleaned = -0.00116511 Jy ! Component: 1450 - total flux cleaned = -0.00113282 Jy ! Component: 1500 - total flux cleaned = -0.0011965 Jy ! Component: 1550 - total flux cleaned = -0.00110192 Jy ! Component: 1600 - total flux cleaned = -0.00103931 Jy ! Component: 1650 - total flux cleaned = -0.000977832 Jy ! Component: 1700 - total flux cleaned = -0.00100881 Jy ! Component: 1750 - total flux cleaned = -0.000978707 Jy ! Component: 1800 - total flux cleaned = -0.000949201 Jy ! Component: 1850 - total flux cleaned = -0.000832085 Jy ! Component: 1900 - total flux cleaned = -0.000832581 Jy ! Component: 1950 - total flux cleaned = -0.000804153 Jy ! Component: 2000 - total flux cleaned = -0.00069085 Jy ! Component: 2050 - total flux cleaned = -0.00049482 Jy ! Component: 2100 - total flux cleaned = -0.000467297 Jy ! Component: 2150 - total flux cleaned = -0.000357098 Jy ! Component: 2200 - total flux cleaned = -0.000247935 Jy ! Component: 2250 - total flux cleaned = -5.94609e-05 Jy ! Component: 2300 - total flux cleaned = 2.04218e-05 Jy ! Component: 2350 - total flux cleaned = 0.000152505 Jy ! Component: 2400 - total flux cleaned = 0.000178757 Jy ! Component: 2450 - total flux cleaned = 0.000359751 Jy ! Component: 2500 - total flux cleaned = 0.000410644 Jy ! Component: 2550 - total flux cleaned = 0.000385235 Jy ! Component: 2600 - total flux cleaned = 0.000410393 Jy ! Component: 2650 - total flux cleaned = 0.000460119 Jy ! Component: 2700 - total flux cleaned = 0.000485013 Jy ! Component: 2750 - total flux cleaned = 0.000509738 Jy ! Component: 2800 - total flux cleaned = 0.000582521 Jy ! Component: 2850 - total flux cleaned = 0.000606613 Jy ! Component: 2900 - total flux cleaned = 0.000630174 Jy ! Component: 2950 - total flux cleaned = 0.0005591 Jy ! Component: 3000 - total flux cleaned = 0.00055939 Jy ! Component: 3050 - total flux cleaned = 0.000652725 Jy ! Component: 3100 - total flux cleaned = 0.000606418 Jy ! Component: 3150 - total flux cleaned = 0.000560501 Jy ! Component: 3200 - total flux cleaned = 0.000651613 Jy ! Component: 3250 - total flux cleaned = 0.000629353 Jy ! Component: 3300 - total flux cleaned = 0.000696479 Jy ! Component: 3350 - total flux cleaned = 0.000629677 Jy ! Component: 3400 - total flux cleaned = 0.000651695 Jy ! Component: 3450 - total flux cleaned = 0.00065176 Jy ! Component: 3500 - total flux cleaned = 0.000651828 Jy ! Component: 3550 - total flux cleaned = 0.000673506 Jy ! Component: 3600 - total flux cleaned = 0.000609413 Jy ! Component: 3650 - total flux cleaned = 0.000673289 Jy ! Component: 3700 - total flux cleaned = 0.000652435 Jy ! Component: 3750 - total flux cleaned = 0.000631426 Jy ! Component: 3800 - total flux cleaned = 0.000631574 Jy ! Component: 3850 - total flux cleaned = 0.00061089 Jy ! Component: 3900 - total flux cleaned = 0.000631372 Jy ! Component: 3950 - total flux cleaned = 0.000611159 Jy ! Component: 4000 - total flux cleaned = 0.000510475 Jy ! Component: 4050 - total flux cleaned = 0.000590641 Jy ! Total flux subtracted in 4096 components = 0.000689947 Jy ! Clean residual min=-0.001219 max=0.001341 Jy/beam ! Clean residual mean=0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.685177 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 464 components and 0.685178 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0958+3224_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.096 x 2.202 at -23.23 degrees (North through East) ! Clean map min=-0.0026613 max=0.49952 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0958+3224_X_b_map.fits wmodel /vlbi/uf001/uvm//J0958+3224_X_b_map.mod ! Writing 464 model components to file: /vlbi/uf001/uvm//J0958+3224_X_b_map.mod wobs /vlbi/uf001/uvm//J0958+3224_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0958+3224_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0958+3224_X_b_map.win ! wwins: Wrote 5 windows to /vlbi/uf001/uvm//J0958+3224_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.499521 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000348143 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.209086 0.209086 0.418172 0.836344 1.67269 3.34538 6.69075 13.3815 26.763 53.526 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.499 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1434.82 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0958+3224_X_b_dfm.log closed on Sun Jan 13 21:17:36 2019