! Started logfile: /vlbi/uf001/uvm//J0955+3335_S_a_dfm.log on Sun Jan 13 21:17:03 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J0955+3335_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0955+3335_S_a_uvm.fits ! AN table 1: 42 integrations on 21 of 21 possible baselines. ! AN table 2: 74 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.999661 visibilities/baseline/integration-bin. ! Found source: J0955+3335 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 8859 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0955+3335_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.003414Jy sigma=22.781517 ! Fit after self-cal, rms=0.922040Jy sigma=20.900031 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=8.397 mas, bpa=-19.07 degrees ! Estimated noise=0.514439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0623916 Jy ! Component: 100 - total flux cleaned = 0.0759987 Jy ! Total flux subtracted in 100 components = 0.0759987 Jy ! Clean residual min=-0.002528 max=0.003809 Jy/beam ! Clean residual mean=-0.000001 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.0759987 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0759987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058564Jy sigma=1.226784 ! Fit after self-cal, rms=0.058250Jy sigma=1.220606 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=8.606 mas, bpa=-17.67 degrees ! Estimated noise=0.348366 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450211 Jy ! Component: 100 - total flux cleaned = 0.00685159 Jy ! Component: 150 - total flux cleaned = 0.00843117 Jy ! Component: 200 - total flux cleaned = 0.00953846 Jy ! Total flux subtracted in 200 components = 0.00953846 Jy ! Clean residual min=-0.002209 max=0.003425 Jy/beam ! Clean residual mean=0.000003 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0855372 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 27 components and 0.0855372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057945Jy sigma=1.211203 ! Fit after self-cal, rms=0.057943Jy sigma=1.211097 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.3 x 8.606 at -17.67 degrees (North through East) ! Clean map min=-0.0021367 max=0.080484 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.96 KP 1.03 LA 0.94 ! NL 1.09 OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.93 HN 1.01 KP 0.94 ! LA 0.95 MK 1.06 NL 0.97 OV 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.00 KP 1.02 LA 1.03 ! NL 1.04 OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.95 HN 1.01 KP 0.97 ! LA 0.98 MK 0.92 NL 0.99 OV 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.95 KP 1.08 LA 0.92 ! NL 1.08 OV 0.99 PT 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 0.97 HN 1.00 KP 0.97 ! LA 0.98 MK 1.04 NL 0.98 OV 1.01 ! ! ! Fit before self-cal, rms=0.057943Jy sigma=1.211097 ! Fit after self-cal, rms=0.057963Jy sigma=1.204281 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.303 mas, bmaj=8.677 mas, bpa=-17.66 degrees ! Estimated noise=0.344526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106118 Jy ! Component: 100 - total flux cleaned = -0.00129831 Jy ! Component: 150 - total flux cleaned = -0.00134935 Jy ! Component: 200 - total flux cleaned = -0.00134977 Jy ! Total flux subtracted in 200 components = -0.00134977 Jy ! Clean residual min=-0.002206 max=0.002737 Jy/beam ! Clean residual mean=0.000005 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0841874 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0841874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057933Jy sigma=1.203920 ! Fit after self-cal, rms=0.057975Jy sigma=1.203729 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057975Jy sigma=1.203729 ! Fit after self-cal, rms=0.063556Jy sigma=1.191811 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.31 mas, bmaj=8.698 mas, bpa=-17.45 degrees ! Estimated noise=0.34483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000450384 Jy ! Component: 100 - total flux cleaned = -0.000698405 Jy ! Component: 150 - total flux cleaned = -0.000750284 Jy ! Component: 200 - total flux cleaned = -0.000795612 Jy ! Total flux subtracted in 200 components = -0.000795612 Jy ! Clean residual min=-0.001449 max=0.001343 Jy/beam ! Clean residual mean=0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0833918 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.0833918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063552Jy sigma=1.191713 ! Fit after self-cal, rms=0.063688Jy sigma=1.191352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102057 Jy ! Component: 100 - total flux cleaned = -0.000102142 Jy ! Component: 150 - total flux cleaned = -0.000102075 Jy ! Component: 200 - total flux cleaned = -0.000101981 Jy ! Total flux subtracted in 200 components = -0.000101981 Jy ! Clean residual min=-0.001435 max=0.001346 Jy/beam ! Clean residual mean=0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0832898 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0832898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063686Jy sigma=1.191318 ! Fit after self-cal, rms=0.063688Jy sigma=1.191317 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063688Jy sigma=1.191317 ! Fit after self-cal, rms=0.064490Jy sigma=1.191273 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.32 mas, bmaj=8.716 mas, bpa=-17.4 degrees ! Estimated noise=0.34488 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323259 Jy ! Component: 100 - total flux cleaned = -0.000405587 Jy ! Component: 150 - total flux cleaned = -0.000460192 Jy ! Component: 200 - total flux cleaned = -0.00048741 Jy ! Total flux subtracted in 200 components = -0.00048741 Jy ! Clean residual min=-0.001396 max=0.001384 Jy/beam ! Clean residual mean=0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0828024 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.0828024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064487Jy sigma=1.191220 ! Fit after self-cal, rms=0.064501Jy sigma=1.191214 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.69207e-05 Jy ! Component: 100 - total flux cleaned = -3.91625e-05 Jy ! Component: 150 - total flux cleaned = -4.50283e-05 Jy ! Component: 200 - total flux cleaned = -6.1628e-05 Jy ! Total flux subtracted in 200 components = -6.1628e-05 Jy ! Clean residual min=-0.001396 max=0.001381 Jy/beam ! Clean residual mean=0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0827407 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.0827407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064500Jy sigma=1.191194 ! Fit after self-cal, rms=0.064500Jy sigma=1.191193 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064500Jy sigma=1.191193 ! Fit after self-cal, rms=0.064670Jy sigma=1.191176 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.809 mas, bmaj=10.6 mas, bpa=-10.98 degrees ! Estimated noise=0.392216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019083 Jy ! Component: 100 - total flux cleaned = -0.000213001 Jy ! Component: 150 - total flux cleaned = -0.000212802 Jy ! Component: 200 - total flux cleaned = -0.000208352 Jy ! Total flux subtracted in 200 components = -0.000208352 Jy ! Clean residual min=-0.001373 max=0.001363 Jy/beam ! Clean residual mean=0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0825324 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.0825324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064668Jy sigma=1.191187 ! Fit after self-cal, rms=0.064671Jy sigma=1.191183 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.50436e-06 Jy ! Component: 100 - total flux cleaned = 5.06643e-06 Jy ! Component: 150 - total flux cleaned = 1.22074e-05 Jy ! Component: 200 - total flux cleaned = 1.57332e-05 Jy ! Total flux subtracted in 200 components = 1.57332e-05 Jy ! Clean residual min=-0.001367 max=0.001363 Jy/beam ! Clean residual mean=0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0825481 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.0825481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064670Jy sigma=1.191182 ! Fit after self-cal, rms=0.064670Jy sigma=1.191181 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.328 mas, bmaj=8.729 mas, bpa=-17.37 degrees ! Estimated noise=0.344925 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.328 x 8.729 at -17.37 degrees (North through East) ! Clean map min=-0.0013638 max=0.079927 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=8.445 mas, bpa=-18.72 degrees ! Estimated noise=0.512365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622392 Jy ! Component: 100 - total flux cleaned = 0.0758141 Jy ! Component: 150 - total flux cleaned = 0.0792162 Jy ! Component: 200 - total flux cleaned = 0.0808573 Jy ! Total flux subtracted in 200 components = 0.0808573 Jy ! Clean residual min=-0.002035 max=0.001963 Jy/beam ! Clean residual mean=-0.000003 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0808574 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0808574 Jy ! Inverting map and beam ! Estimated beam: bmin=4.328 mas, bmaj=8.729 mas, bpa=-17.37 degrees ! Estimated noise=0.344925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549818 Jy ! Component: 100 - total flux cleaned = 0.000708685 Jy ! Component: 150 - total flux cleaned = 0.00076681 Jy ! Component: 200 - total flux cleaned = 0.000815509 Jy ! Total flux subtracted in 200 components = 0.000815509 Jy ! Clean residual min=-0.001345 max=0.001351 Jy/beam ! Clean residual mean=0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0816729 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.0816729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.809 mas, bmaj=10.6 mas, bpa=-10.98 degrees ! Estimated noise=0.392216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423603 Jy ! Component: 100 - total flux cleaned = 0.000514885 Jy ! Component: 150 - total flux cleaned = 0.000575044 Jy ! Component: 200 - total flux cleaned = 0.000629659 Jy ! Total flux subtracted in 200 components = 0.000629659 Jy ! Clean residual min=-0.001330 max=0.001392 Jy/beam ! Clean residual mean=0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0823025 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.91038e-05 Jy ! Component: 100 - total flux cleaned = 4.99394e-05 Jy ! Component: 150 - total flux cleaned = 6.46992e-05 Jy ! Component: 200 - total flux cleaned = 7.40311e-05 Jy ! Total flux subtracted in 200 components = 7.40311e-05 Jy ! Clean residual min=-0.001334 max=0.001383 Jy/beam ! Clean residual mean=0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0823765 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 56 components and 0.0823765 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.328 mas, bmaj=8.729 mas, bpa=-17.37 degrees ! Estimated noise=0.344925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.54212e-05 Jy ! Component: 100 - total flux cleaned = -7.55485e-05 Jy ! Component: 150 - total flux cleaned = -8.24637e-05 Jy ! Component: 200 - total flux cleaned = -0.000103068 Jy ! Total flux subtracted in 200 components = -0.000103068 Jy ! Clean residual min=-0.001408 max=0.001352 Jy/beam ! Clean residual mean=0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.0822735 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.0822735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064667Jy sigma=1.191160 ! Fit after self-cal, rms=0.064669Jy sigma=1.191142 wmodel J0955+3335_S_a_map.mod ! Writing 66 model components to file: J0955+3335_S_a_map.mod wobs J0955+3335_S_a_uvs.fits ! Writing UV FITS file: J0955+3335_S_a_uvs.fits wwins J0955+3335_S_a_map.win ! wwins: Wrote 1 windows to J0955+3335_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.12975e-05 Jy ! Component: 100 - total flux cleaned = -0.000299812 Jy ! Component: 150 - total flux cleaned = -0.000427568 Jy ! Component: 200 - total flux cleaned = -0.000530159 Jy ! Component: 250 - total flux cleaned = -0.000649653 Jy ! Component: 300 - total flux cleaned = -0.000804722 Jy ! Component: 350 - total flux cleaned = -0.000918048 Jy ! Component: 400 - total flux cleaned = -0.000991743 Jy ! Component: 450 - total flux cleaned = -0.0010818 Jy ! Component: 500 - total flux cleaned = -0.00113488 Jy ! Component: 550 - total flux cleaned = -0.00123896 Jy ! Component: 600 - total flux cleaned = -0.00134091 Jy ! Component: 650 - total flux cleaned = -0.00135747 Jy ! Component: 700 - total flux cleaned = -0.00142351 Jy ! Component: 750 - total flux cleaned = -0.00145601 Jy ! Component: 800 - total flux cleaned = -0.00150424 Jy ! Component: 850 - total flux cleaned = -0.00155199 Jy ! Component: 900 - total flux cleaned = -0.00161398 Jy ! Component: 950 - total flux cleaned = -0.00162922 Jy ! Component: 1000 - total flux cleaned = -0.00164439 Jy ! Component: 1050 - total flux cleaned = -0.00167424 Jy ! Component: 1100 - total flux cleaned = -0.00170354 Jy ! Component: 1150 - total flux cleaned = -0.0016892 Jy ! Component: 1200 - total flux cleaned = -0.00170336 Jy ! Component: 1250 - total flux cleaned = -0.00163236 Jy ! Component: 1300 - total flux cleaned = -0.00168845 Jy ! Component: 1350 - total flux cleaned = -0.00163316 Jy ! Component: 1400 - total flux cleaned = -0.00167419 Jy ! Component: 1450 - total flux cleaned = -0.00163358 Jy ! Component: 1500 - total flux cleaned = -0.00162018 Jy ! Component: 1550 - total flux cleaned = -0.0015938 Jy ! Component: 1600 - total flux cleaned = -0.00154165 Jy ! Component: 1650 - total flux cleaned = -0.00152883 Jy ! Component: 1700 - total flux cleaned = -0.0015673 Jy ! Component: 1750 - total flux cleaned = -0.00150366 Jy ! Component: 1800 - total flux cleaned = -0.00146593 Jy ! Component: 1850 - total flux cleaned = -0.00145334 Jy ! Component: 1900 - total flux cleaned = -0.00139162 Jy ! Component: 1950 - total flux cleaned = -0.00131848 Jy ! Component: 2000 - total flux cleaned = -0.0012943 Jy ! Component: 2050 - total flux cleaned = -0.00124646 Jy ! Component: 2100 - total flux cleaned = -0.0012583 Jy ! Component: 2150 - total flux cleaned = -0.00121122 Jy ! Component: 2200 - total flux cleaned = -0.00121123 Jy ! Component: 2250 - total flux cleaned = -0.00121108 Jy ! Component: 2300 - total flux cleaned = -0.00117665 Jy ! Component: 2350 - total flux cleaned = -0.00113125 Jy ! Component: 2400 - total flux cleaned = -0.00114261 Jy ! Component: 2450 - total flux cleaned = -0.0011536 Jy ! Component: 2500 - total flux cleaned = -0.00115342 Jy ! Component: 2550 - total flux cleaned = -0.00104336 Jy ! Component: 2600 - total flux cleaned = -0.00107609 Jy ! Component: 2650 - total flux cleaned = -0.00108688 Jy ! Component: 2700 - total flux cleaned = -0.00103311 Jy ! Component: 2750 - total flux cleaned = -0.00100116 Jy ! Component: 2800 - total flux cleaned = -0.00103282 Jy ! Component: 2850 - total flux cleaned = -0.00100129 Jy ! Component: 2900 - total flux cleaned = -0.000970011 Jy ! Component: 2950 - total flux cleaned = -0.000939075 Jy ! Component: 3000 - total flux cleaned = -0.000928888 Jy ! Component: 3050 - total flux cleaned = -0.000908477 Jy ! Component: 3100 - total flux cleaned = -0.000888187 Jy ! Component: 3150 - total flux cleaned = -0.000838041 Jy ! Component: 3200 - total flux cleaned = -0.000828058 Jy ! Component: 3250 - total flux cleaned = -0.00079838 Jy ! Component: 3300 - total flux cleaned = -0.000778666 Jy ! Component: 3350 - total flux cleaned = -0.000729766 Jy ! Component: 3400 - total flux cleaned = -0.00071041 Jy ! Component: 3450 - total flux cleaned = -0.000691096 Jy ! Component: 3500 - total flux cleaned = -0.000652905 Jy ! Component: 3550 - total flux cleaned = -0.000624369 Jy ! Component: 3600 - total flux cleaned = -0.000605359 Jy ! Component: 3650 - total flux cleaned = -0.000586527 Jy ! Component: 3700 - total flux cleaned = -0.000577183 Jy ! Component: 3750 - total flux cleaned = -0.000549258 Jy ! Component: 3800 - total flux cleaned = -0.000521491 Jy ! Component: 3850 - total flux cleaned = -0.000530635 Jy ! Component: 3900 - total flux cleaned = -0.000484958 Jy ! Component: 3950 - total flux cleaned = -0.00044856 Jy ! Component: 4000 - total flux cleaned = -0.000439605 Jy ! Component: 4050 - total flux cleaned = -0.000448538 Jy ! Total flux subtracted in 4096 components = -0.000412801 Jy ! Clean residual min=-0.000575 max=0.000529 Jy/beam ! Clean residual mean=-0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0818607 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 354 components and 0.0818607 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0955+3335_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.328 x 8.729 at -17.37 degrees (North through East) ! Clean map min=-0.0010975 max=0.07989 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0955+3335_S_a_map.fits wmodel /vlbi/uf001/uvm//J0955+3335_S_a_map.mod ! Writing 354 model components to file: /vlbi/uf001/uvm//J0955+3335_S_a_map.mod wobs /vlbi/uf001/uvm//J0955+3335_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0955+3335_S_a_uvs.fits wwins /vlbi/uf001/uvm//J0955+3335_S_a_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J0955+3335_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0798905 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168378 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.632283 0.632283 1.26457 2.52913 5.05826 10.1165 20.233 40.4661 80.9322 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.079 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 474.471 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0955+3335_S_a_dfm.log closed on Sun Jan 13 21:17:07 2019