! Started logfile: /vlbi/uf001/uva//J0954+7435_X_dfm.log on Mon Jan 14 00:39:56 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0954+7435_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0954+7435_X_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.883041 visibilities/baseline/integration-bin. ! Found source: J0954+7435 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 36240 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0954+7435_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014472Jy sigma=24.539693 ! Fit after self-cal, rms=0.866556Jy sigma=20.875891 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7201 mas, bmaj=1.146 mas, bpa=83.98 degrees ! Estimated noise=0.325817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0903113 Jy ! Component: 100 - total flux cleaned = 0.129722 Jy ! Total flux subtracted in 100 components = 0.129722 Jy ! Clean residual min=-0.006868 max=0.019864 Jy/beam ! Clean residual mean=0.000013 rms=0.002194 Jy/beam ! Combined flux in latest and established models = 0.129722 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.129722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090771Jy sigma=2.176441 ! Fit after self-cal, rms=0.090519Jy sigma=2.171095 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245474 Jy ! Component: 100 - total flux cleaned = 0.0402143 Jy ! Total flux subtracted in 100 components = 0.0402143 Jy ! Clean residual min=-0.005579 max=0.015600 Jy/beam ! Clean residual mean=0.000002 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.169936 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.169936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078911Jy sigma=1.877516 ! Fit after self-cal, rms=0.078833Jy sigma=1.875860 ! Inverting map ! Added new window around map position (-20.4, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152613 Jy ! Component: 100 - total flux cleaned = 0.0261522 Jy ! Total flux subtracted in 100 components = 0.0261522 Jy ! Clean residual min=-0.005100 max=0.015144 Jy/beam ! Clean residual mean=0.000000 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.196088 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.196088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072858Jy sigma=1.723640 ! Fit after self-cal, rms=0.072566Jy sigma=1.718108 ! Inverting map ! Added new window around map position (-19.2, -8.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143209 Jy ! Component: 100 - total flux cleaned = 0.0239091 Jy ! Total flux subtracted in 100 components = 0.0239091 Jy ! Clean residual min=-0.004609 max=0.007508 Jy/beam ! Clean residual mean=0.000001 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.219997 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.219997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067381Jy sigma=1.587094 ! Fit after self-cal, rms=0.066998Jy sigma=1.577852 ! Inverting map ! Added new window around map position (-20.8, -8.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00926824 Jy ! Component: 100 - total flux cleaned = 0.0166944 Jy ! Total flux subtracted in 100 components = 0.0166944 Jy ! Clean residual min=-0.004033 max=0.006598 Jy/beam ! Clean residual mean=0.000002 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.236692 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 85 components and 0.236692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064338Jy sigma=1.509463 ! Fit after self-cal, rms=0.064214Jy sigma=1.506605 ! Inverting map ! Added new window around map position (-1.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743439 Jy ! Component: 100 - total flux cleaned = 0.0135309 Jy ! Total flux subtracted in 100 components = 0.0135309 Jy ! Clean residual min=-0.003735 max=0.005202 Jy/beam ! Clean residual mean=0.000001 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.250223 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 96 components and 0.250223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062433Jy sigma=1.460410 ! Fit after self-cal, rms=0.062375Jy sigma=1.459111 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9675 mas, bmaj=1.412 mas, bpa=83.44 degrees ! Estimated noise=0.160727 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108386 Jy ! Component: 100 - total flux cleaned = 0.0191264 Jy ! Component: 150 - total flux cleaned = 0.0258812 Jy ! Component: 200 - total flux cleaned = 0.031445 Jy ! Total flux subtracted in 200 components = 0.031445 Jy ! Clean residual min=-0.003877 max=0.006580 Jy/beam ! Clean residual mean=-0.000008 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.281668 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 137 components and 0.281668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059607Jy sigma=1.385963 ! Fit after self-cal, rms=0.059442Jy sigma=1.382139 ! Inverting map ! Added new window around map position (-17.2, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724315 Jy ! Component: 100 - total flux cleaned = 0.0124236 Jy ! Component: 150 - total flux cleaned = 0.0167458 Jy ! Component: 200 - total flux cleaned = 0.0204394 Jy ! Total flux subtracted in 200 components = 0.0204394 Jy ! Clean residual min=-0.003592 max=0.005509 Jy/beam ! Clean residual mean=-0.000002 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.302107 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 178 components and 0.302107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058194Jy sigma=1.350052 ! Fit after self-cal, rms=0.058091Jy sigma=1.347437 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9675 x 1.412 at 83.44 degrees (North through East) ! Clean map min=-0.0034898 max=0.12455 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 0.92 KP 1.00 ! LA 0.91 MK 1.02 NL 1.20 OV 0.94 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.94 KP 1.02 ! LA 0.91 MK 1.04 NL 1.18 OV 0.93 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.94 KP 1.03 ! LA 0.90 MK 1.02 NL 1.18 OV 0.92 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 0.95 KP 1.02 ! LA 0.92 MK 1.01 NL 1.16 OV 0.93 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.92 KP 1.03 ! LA 0.90 MK 1.00 NL 1.18 OV 0.96 ! PT 0.85 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.95 KP 1.02 ! LA 0.90 MK 1.05 NL 1.18 OV 0.94 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.95 KP 1.02 ! LA 0.92 MK 1.04 NL 1.18 OV 0.94 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.95 KP 1.02 ! LA 0.92 MK 1.03 NL 1.15 OV 0.96 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.96 KP 1.02 ! LA 0.92 MK 1.04 NL 1.18 OV 0.94 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.96 KP 1.03 ! LA 0.92 MK 1.02 NL 1.22 OV 0.93 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.95 KP 1.03 ! LA 0.94 MK 1.01 NL 1.20 OV 0.97 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.92 KP 1.03 ! LA 0.93 MK 1.06 NL 1.19 OV 0.94 ! PT 0.95 SC 1.00 ! ! ! Fit before self-cal, rms=0.058091Jy sigma=1.347437 ! Fit after self-cal, rms=0.055525Jy sigma=1.280841 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9676 mas, bmaj=1.407 mas, bpa=82.97 degrees ! Estimated noise=0.160078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.6, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340967 Jy ! Component: 100 - total flux cleaned = 0.00587673 Jy ! Component: 150 - total flux cleaned = 0.00725135 Jy ! Component: 200 - total flux cleaned = 0.00822635 Jy ! Total flux subtracted in 200 components = 0.00822635 Jy ! Clean residual min=-0.002025 max=0.002216 Jy/beam ! Clean residual mean=-0.000013 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.310333 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 215 components and 0.310333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055251Jy sigma=1.272535 ! Fit after self-cal, rms=0.055295Jy sigma=1.271859 ! Inverting map ! Added new window around map position (-14.6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019799 Jy ! Component: 100 - total flux cleaned = 0.00303365 Jy ! Component: 150 - total flux cleaned = 0.0039576 Jy ! Component: 200 - total flux cleaned = 0.00459295 Jy ! Total flux subtracted in 200 components = 0.00459295 Jy ! Clean residual min=-0.001895 max=0.001784 Jy/beam ! Clean residual mean=-0.000009 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.314926 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 242 components and 0.314926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055173Jy sigma=1.268522 ! Fit after self-cal, rms=0.055166Jy sigma=1.268382 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055166Jy sigma=1.268382 ! Fit after self-cal, rms=0.054912Jy sigma=1.259502 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9658 mas, bmaj=1.398 mas, bpa=83.29 degrees ! Estimated noise=0.159293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138676 Jy ! Component: 100 - total flux cleaned = 0.00225954 Jy ! Component: 150 - total flux cleaned = 0.0029482 Jy ! Component: 200 - total flux cleaned = 0.00343639 Jy ! Total flux subtracted in 200 components = 0.00343639 Jy ! Clean residual min=-0.001287 max=0.001426 Jy/beam ! Clean residual mean=-0.000006 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.318363 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 260 components and 0.318363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054857Jy sigma=1.257941 ! Fit after self-cal, rms=0.054864Jy sigma=1.257842 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.8, -38.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136411 Jy ! Component: 100 - total flux cleaned = 0.00226057 Jy ! Component: 150 - total flux cleaned = 0.00267984 Jy ! Component: 200 - total flux cleaned = 0.00301159 Jy ! Total flux subtracted in 200 components = 0.00301159 Jy ! Clean residual min=-0.001267 max=0.001224 Jy/beam ! Clean residual mean=-0.000006 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.321374 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 284 components and 0.321374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054818Jy sigma=1.256556 ! Fit after self-cal, rms=0.054815Jy sigma=1.256526 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054815Jy sigma=1.256526 ! Fit after self-cal, rms=0.054724Jy sigma=1.256391 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9639 mas, bmaj=1.397 mas, bpa=83.45 degrees ! Estimated noise=0.159126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000800173 Jy ! Component: 100 - total flux cleaned = 0.00134283 Jy ! Component: 150 - total flux cleaned = 0.00170765 Jy ! Component: 200 - total flux cleaned = 0.00197315 Jy ! Total flux subtracted in 200 components = 0.00197315 Jy ! Clean residual min=-0.001186 max=0.001183 Jy/beam ! Clean residual mean=-0.000005 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.323348 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 287 components and 0.323348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054696Jy sigma=1.255685 ! Fit after self-cal, rms=0.054695Jy sigma=1.255668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.8, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106232 Jy ! Component: 100 - total flux cleaned = 0.00119415 Jy ! Component: 150 - total flux cleaned = 0.0013689 Jy ! Component: 200 - total flux cleaned = 0.00157982 Jy ! Total flux subtracted in 200 components = 0.00157982 Jy ! Clean residual min=-0.001109 max=0.001158 Jy/beam ! Clean residual mean=-0.000004 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.324927 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 305 components and 0.324927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054661Jy sigma=1.254882 ! Fit after self-cal, rms=0.054658Jy sigma=1.254825 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054658Jy sigma=1.254825 ! Fit after self-cal, rms=0.054582Jy sigma=1.254725 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.246 mas, bmaj=2.689 mas, bpa=80.68 degrees ! Estimated noise=0.205625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012541 Jy ! Component: 100 - total flux cleaned = 0.00220351 Jy ! Component: 150 - total flux cleaned = 0.002802 Jy ! Component: 200 - total flux cleaned = 0.00328658 Jy ! Total flux subtracted in 200 components = 0.00328658 Jy ! Clean residual min=-0.001443 max=0.001310 Jy/beam ! Clean residual mean=-0.000007 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.328214 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 318 components and 0.328214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054568Jy sigma=1.254322 ! Fit after self-cal, rms=0.054564Jy sigma=1.254273 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489306 Jy ! Component: 100 - total flux cleaned = 0.000724059 Jy ! Component: 150 - total flux cleaned = 0.000874654 Jy ! Component: 200 - total flux cleaned = 0.00101462 Jy ! Total flux subtracted in 200 components = 0.00101462 Jy ! Clean residual min=-0.001372 max=0.001215 Jy/beam ! Clean residual mean=-0.000007 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.329229 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 325 components and 0.329229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054558Jy sigma=1.254107 ! Fit after self-cal, rms=0.054556Jy sigma=1.254092 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9624 mas, bmaj=1.396 mas, bpa=83.44 degrees ! Estimated noise=0.159013 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9624 x 1.396 at 83.44 degrees (North through East) ! Clean map min=-0.00092614 max=0.12252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.718 mas, bmaj=1.135 mas, bpa=84.19 degrees ! Estimated noise=0.319801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0885021 Jy ! Component: 100 - total flux cleaned = 0.128208 Jy ! Component: 150 - total flux cleaned = 0.153692 Jy ! Component: 200 - total flux cleaned = 0.173193 Jy ! Total flux subtracted in 200 components = 0.173193 Jy ! Clean residual min=-0.004850 max=0.011624 Jy/beam ! Clean residual mean=0.000004 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.173193 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.173193 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9624 mas, bmaj=1.396 mas, bpa=83.44 degrees ! Estimated noise=0.159013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280059 Jy ! Component: 100 - total flux cleaned = 0.0480052 Jy ! Component: 150 - total flux cleaned = 0.0631458 Jy ! Component: 200 - total flux cleaned = 0.0749599 Jy ! Total flux subtracted in 200 components = 0.0749599 Jy ! Clean residual min=-0.003421 max=0.007562 Jy/beam ! Clean residual mean=-0.000014 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.248153 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 113 components and 0.248153 Jy ! Inverting map ! Added new window around map position (-0.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00953025 Jy ! Component: 100 - total flux cleaned = 0.0172815 Jy ! Component: 150 - total flux cleaned = 0.0237556 Jy ! Component: 200 - total flux cleaned = 0.0293049 Jy ! Total flux subtracted in 200 components = 0.0293049 Jy ! Clean residual min=-0.002151 max=0.003802 Jy/beam ! Clean residual mean=-0.000013 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.277458 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 167 components and 0.277458 Jy ! Inverting map ! Added new window around map position (-15.6, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487882 Jy ! Component: 100 - total flux cleaned = 0.00911634 Jy ! Component: 150 - total flux cleaned = 0.0128616 Jy ! Component: 200 - total flux cleaned = 0.0161959 Jy ! Total flux subtracted in 200 components = 0.0161959 Jy ! Clean residual min=-0.001758 max=0.002468 Jy/beam ! Clean residual mean=-0.000010 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.293654 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 222 components and 0.293654 Jy ! Inverting map ! Added new window around map position (-18.6, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303458 Jy ! Component: 100 - total flux cleaned = 0.00570851 Jy ! Component: 150 - total flux cleaned = 0.0081084 Jy ! Component: 200 - total flux cleaned = 0.01027 Jy ! Total flux subtracted in 200 components = 0.01027 Jy ! Clean residual min=-0.001492 max=0.001562 Jy/beam ! Clean residual mean=-0.000008 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.303924 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 264 components and 0.303924 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.246 mas, bmaj=2.689 mas, bpa=80.68 degrees ! Estimated noise=0.205625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404763 Jy ! Component: 100 - total flux cleaned = 0.00723516 Jy ! Component: 150 - total flux cleaned = 0.00983595 Jy ! Component: 200 - total flux cleaned = 0.0120356 Jy ! Total flux subtracted in 200 components = 0.0120356 Jy ! Clean residual min=-0.001720 max=0.001730 Jy/beam ! Clean residual mean=-0.000013 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.31596 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187849 Jy ! Component: 100 - total flux cleaned = 0.00349581 Jy ! Component: 150 - total flux cleaned = 0.00489838 Jy ! Component: 200 - total flux cleaned = 0.00612881 Jy ! Total flux subtracted in 200 components = 0.00612881 Jy ! Clean residual min=-0.001457 max=0.001390 Jy/beam ! Clean residual mean=-0.000010 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.322089 Jy ! Adding 170 model components to the UV plane model. ! The established model now contains 412 components and 0.322089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9624 mas, bmaj=1.396 mas, bpa=83.44 degrees ! Estimated noise=0.159013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095818 Jy ! Component: 100 - total flux cleaned = 0.00173417 Jy ! Component: 150 - total flux cleaned = 0.00242779 Jy ! Component: 200 - total flux cleaned = 0.00306175 Jy ! Total flux subtracted in 200 components = 0.00306175 Jy ! Clean residual min=-0.001010 max=0.001082 Jy/beam ! Clean residual mean=-0.000004 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.32515 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 445 components and 0.32515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054538Jy sigma=1.253664 ! Fit after self-cal, rms=0.054516Jy sigma=1.253255 wmodel J0954+7435_X_map.mod ! Writing 445 model components to file: J0954+7435_X_map.mod wobs J0954+7435_X_uvs.fits ! Writing UV FITS file: J0954+7435_X_uvs.fits wwins J0954+7435_X_map.win ! wwins: Wrote 13 windows to J0954+7435_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155489 Jy ! Component: 100 - total flux cleaned = 0.000227239 Jy ! Component: 150 - total flux cleaned = 0.00027865 Jy ! Component: 200 - total flux cleaned = 0.000328314 Jy ! Component: 250 - total flux cleaned = 0.000376574 Jy ! Component: 300 - total flux cleaned = 0.000376599 Jy ! Component: 350 - total flux cleaned = 0.000376473 Jy ! Component: 400 - total flux cleaned = 0.000346329 Jy ! Component: 450 - total flux cleaned = 0.000331448 Jy ! Component: 500 - total flux cleaned = 0.000331228 Jy ! Component: 550 - total flux cleaned = 0.000359365 Jy ! Component: 600 - total flux cleaned = 0.000345284 Jy ! Component: 650 - total flux cleaned = 0.000345371 Jy ! Component: 700 - total flux cleaned = 0.000345459 Jy ! Component: 750 - total flux cleaned = 0.000318943 Jy ! Component: 800 - total flux cleaned = 0.000331928 Jy ! Component: 850 - total flux cleaned = 0.000318796 Jy ! Component: 900 - total flux cleaned = 0.00029321 Jy ! Component: 950 - total flux cleaned = 0.000280815 Jy ! Component: 1000 - total flux cleaned = 0.000305761 Jy ! Component: 1050 - total flux cleaned = 0.000293479 Jy ! Component: 1100 - total flux cleaned = 0.000281222 Jy ! Component: 1150 - total flux cleaned = 0.000244886 Jy ! Component: 1200 - total flux cleaned = 0.000197163 Jy ! Component: 1250 - total flux cleaned = 0.000126404 Jy ! Component: 1300 - total flux cleaned = 7.99076e-05 Jy ! Component: 1350 - total flux cleaned = 7.99154e-05 Jy ! Component: 1400 - total flux cleaned = 1.12549e-05 Jy ! Component: 1450 - total flux cleaned = 2.26227e-05 Jy ! Component: 1500 - total flux cleaned = 2.25438e-05 Jy ! Component: 1550 - total flux cleaned = 1.14112e-05 Jy ! Component: 1600 - total flux cleaned = 2.23115e-05 Jy ! Component: 1650 - total flux cleaned = -2.14638e-05 Jy ! Component: 1700 - total flux cleaned = 2.18942e-05 Jy ! Component: 1750 - total flux cleaned = -1.05683e-05 Jy ! Component: 1800 - total flux cleaned = 1.09517e-05 Jy ! Component: 1850 - total flux cleaned = -2.08692e-05 Jy ! Component: 1900 - total flux cleaned = 4.25702e-05 Jy ! Component: 1950 - total flux cleaned = 2.15554e-05 Jy ! Component: 2000 - total flux cleaned = 3.19896e-05 Jy ! Component: 2050 - total flux cleaned = 4.22685e-05 Jy ! Component: 2100 - total flux cleaned = 7.30238e-05 Jy ! Component: 2150 - total flux cleaned = 7.30576e-05 Jy ! Component: 2200 - total flux cleaned = 5.27077e-05 Jy ! Component: 2250 - total flux cleaned = 6.28099e-05 Jy ! Component: 2300 - total flux cleaned = 7.28692e-05 Jy ! Component: 2350 - total flux cleaned = 7.28351e-05 Jy ! Component: 2400 - total flux cleaned = 3.34985e-05 Jy ! Component: 2450 - total flux cleaned = 7.27377e-05 Jy ! Component: 2500 - total flux cleaned = 0.000111616 Jy ! Component: 2550 - total flux cleaned = 7.28858e-05 Jy ! Component: 2600 - total flux cleaned = 0.000111219 Jy ! Component: 2650 - total flux cleaned = 9.21692e-05 Jy ! Component: 2700 - total flux cleaned = 0.0001016 Jy ! Component: 2750 - total flux cleaned = 0.000111086 Jy ! Component: 2800 - total flux cleaned = 8.28711e-05 Jy ! Component: 2850 - total flux cleaned = 6.41897e-05 Jy ! Component: 2900 - total flux cleaned = 5.49432e-05 Jy ! Component: 2950 - total flux cleaned = 6.41005e-05 Jy ! Component: 3000 - total flux cleaned = 5.4808e-05 Jy ! Component: 3050 - total flux cleaned = 8.22916e-05 Jy ! Component: 3100 - total flux cleaned = 2.76742e-05 Jy ! Component: 3150 - total flux cleaned = 9.62958e-06 Jy ! Component: 3200 - total flux cleaned = 1.87018e-05 Jy ! Component: 3250 - total flux cleaned = 9.83438e-06 Jy ! Component: 3300 - total flux cleaned = 1.86971e-05 Jy ! Component: 3350 - total flux cleaned = 9.89398e-06 Jy ! Component: 3400 - total flux cleaned = 2.75228e-05 Jy ! Component: 3450 - total flux cleaned = 1.87297e-05 Jy ! Component: 3500 - total flux cleaned = -7.54359e-06 Jy ! Component: 3550 - total flux cleaned = -1.62477e-05 Jy ! Component: 3600 - total flux cleaned = -7.58403e-06 Jy ! Component: 3650 - total flux cleaned = -7.60299e-06 Jy ! Component: 3700 - total flux cleaned = -4.19225e-05 Jy ! Component: 3750 - total flux cleaned = -1.63078e-05 Jy ! Component: 3800 - total flux cleaned = -4.17849e-05 Jy ! Component: 3850 - total flux cleaned = -7.55891e-05 Jy ! Component: 3900 - total flux cleaned = -6.71955e-05 Jy ! Component: 3950 - total flux cleaned = -4.20094e-05 Jy ! Component: 4000 - total flux cleaned = -3.36496e-05 Jy ! Component: 4050 - total flux cleaned = -1.70567e-05 Jy ! Total flux subtracted in 4096 components = -3.35647e-05 Jy ! Clean residual min=-0.000487 max=0.000496 Jy/beam ! Clean residual mean=-0.000002 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.325117 Jy keep ! Adding 363 model components to the UV plane model. ! The established model now contains 808 components and 0.325117 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0954+7435_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9624 x 1.396 at 83.44 degrees (North through East) ! Clean map min=-0.00071969 max=0.12248 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0954+7435_X_map.fits wmodel /vlbi/uf001/uva//J0954+7435_X_map.mod ! Writing 808 model components to file: /vlbi/uf001/uva//J0954+7435_X_map.mod wobs /vlbi/uf001/uva//J0954+7435_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0954+7435_X_uvs.fits wwins /vlbi/uf001/uva//J0954+7435_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J0954+7435_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.122483 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000140147 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343267 0.343267 0.686535 1.37307 2.74614 5.49228 10.9846 21.9691 43.9382 87.8764 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.122 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 873.954 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0954+7435_X_dfm.log closed on Mon Jan 14 00:40:03 2019