! Started logfile: /vlbi/uf001/uvm//J0953-0840_S_a_dfm.log on Sun Jan 13 21:16:48 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0953-0840_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0953-0840_S_a_uvm.fits
! AN table 1: 154 integrations on 45 of 45 possible baselines.
! AN table 2: 58 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.748305 visibilities/baseline/integration-bin.
! Found source: J0953-0840
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 19203 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0953-0840_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 313 telescope corrections were flagged in sub-array 1.
!  A total of 44 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 313 telescope corrections were flagged in sub-array 1.
!  A total of 44 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 313 telescope corrections were flagged in sub-array 1.
!  A total of 44 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003525Jy  sigma=19.694061
! Fit after  self-cal, rms=0.956458Jy  sigma=18.764227
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.705 mas, bmaj=7.052 mas, bpa=-5.09 degrees
! Estimated noise=0.428111 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342741 Jy
! Component: 100  -  total flux cleaned = 0.0421587 Jy
! Total flux subtracted in 100 components = 0.0421587 Jy
! Clean residual min=-0.002637 max=0.002835 Jy/beam
! Clean residual mean=-0.000002 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.0421587 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0421587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066398Jy  sigma=1.249916
! Fit after  self-cal, rms=0.064801Jy  sigma=1.219887
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00466487 Jy
! Component: 100  -  total flux cleaned = 0.0071182 Jy
! Total flux subtracted in 100 components = 0.0071182 Jy
! Clean residual min=-0.002121 max=0.002393 Jy/beam
! Clean residual mean=0.000001 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.0492769 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.0492769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064388Jy  sigma=1.211490
! Fit after  self-cal, rms=0.064365Jy  sigma=1.210967
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.425 mas, bmaj=8.562 mas, bpa=-3.65 degrees
! Estimated noise=0.265682 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199476 Jy
! Component: 100  -  total flux cleaned = 0.00288941 Jy
! Component: 150  -  total flux cleaned = 0.00336987 Jy
! Component: 200  -  total flux cleaned = 0.00355277 Jy
! Total flux subtracted in 200 components = 0.00355277 Jy
! Clean residual min=-0.001490 max=0.001512 Jy/beam
! Clean residual mean=0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.0528296 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 53 components and 0.0528296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064309Jy  sigma=1.209874
! Fit after  self-cal, rms=0.064305Jy  sigma=1.209802
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.425 x 8.562 at -3.65 degrees (North through East)
! Clean map  min=-0.0014649  max=0.047582 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.02     KP        1.03     
!   LA        0.95     MK        0.98     NL        1.02     OV        1.01     
!   PT        1.05     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.95     HN        1.17     KP        1.02     
!   LA        0.92     MK        1.04     NL        1.19     PT        1.06     
! 
! 
! Correcting IF 2.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.00     KP        1.03     
!   LA        0.95     MK        0.96     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     FD        0.95     HN        0.96     KP        1.09     
!   LA        1.00     MK        1.14     NL        0.63     PT        1.08     
! 
! 
! Correcting IF 3.
!  A total of 111 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.02     HN        0.99     KP        1.00     
!   LA        0.94     MK        1.06     NL        1.01     OV        1.02     
!   PT        0.96     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.18     FD        0.96     HN        1.05     KP        1.08     
!   LA        0.96     MK        1.01     NL        0.86     PT        1.24     
! 
! 
! Fit before self-cal, rms=0.064305Jy  sigma=1.209802
! Fit after  self-cal, rms=0.064365Jy  sigma=1.212284
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.427 mas, bmaj=8.52 mas, bpa=-3.531 degrees
! Estimated noise=0.267399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.09936e-05 Jy
! Component: 100  -  total flux cleaned = -6.06773e-05 Jy
! Component: 150  -  total flux cleaned = -6.93042e-05 Jy
! Component: 200  -  total flux cleaned = -6.92569e-05 Jy
! Total flux subtracted in 200 components = -6.92569e-05 Jy
! Clean residual min=-0.001360 max=0.001293 Jy/beam
! Clean residual mean=0.000003 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.0527604 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 59 components and 0.0527604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064362Jy  sigma=1.212235
! Fit after  self-cal, rms=0.064448Jy  sigma=1.211120
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064448Jy  sigma=1.211120
! Fit after  self-cal, rms=0.064787Jy  sigma=1.209291
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.435 mas, bmaj=8.515 mas, bpa=-3.369 degrees
! Estimated noise=0.267523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.8456e-05 Jy
! Component: 100  -  total flux cleaned = -6.29029e-05 Jy
! Component: 150  -  total flux cleaned = -6.30694e-05 Jy
! Component: 200  -  total flux cleaned = -6.32083e-05 Jy
! Total flux subtracted in 200 components = -6.32083e-05 Jy
! Clean residual min=-0.001381 max=0.001189 Jy/beam
! Clean residual mean=0.000002 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0526972 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 61 components and 0.0526972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064784Jy  sigma=1.209265
! Fit after  self-cal, rms=0.064861Jy  sigma=1.208929
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.41602e-05 Jy
! Component: 100  -  total flux cleaned = 2.42709e-05 Jy
! Component: 150  -  total flux cleaned = 2.39679e-05 Jy
! Component: 200  -  total flux cleaned = 1.76066e-05 Jy
! Total flux subtracted in 200 components = 1.76066e-05 Jy
! Clean residual min=-0.001388 max=0.001189 Jy/beam
! Clean residual mean=0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0527148 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 61 components and 0.0527148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064859Jy  sigma=1.208907
! Fit after  self-cal, rms=0.064853Jy  sigma=1.208847
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064853Jy  sigma=1.208847
! Fit after  self-cal, rms=0.065122Jy  sigma=1.208697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=8.501 mas, bpa=-3.241 degrees
! Estimated noise=0.267336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.80568e-05 Jy
! Component: 100  -  total flux cleaned = 2.15077e-05 Jy
! Component: 150  -  total flux cleaned = 3.35514e-05 Jy
! Component: 200  -  total flux cleaned = 3.92401e-05 Jy
! Total flux subtracted in 200 components = 3.92401e-05 Jy
! Clean residual min=-0.001394 max=0.001120 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.052754 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 65 components and 0.052754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065121Jy  sigma=1.208676
! Fit after  self-cal, rms=0.065154Jy  sigma=1.208632
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.66022e-05 Jy
! Component: 100  -  total flux cleaned = -1.04816e-05 Jy
! Component: 150  -  total flux cleaned = -1.59786e-05 Jy
! Component: 200  -  total flux cleaned = -1.06073e-05 Jy
! Total flux subtracted in 200 components = -1.06073e-05 Jy
! Clean residual min=-0.001395 max=0.001125 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0527434 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 65 components and 0.0527434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065153Jy  sigma=1.208620
! Fit after  self-cal, rms=0.065154Jy  sigma=1.208618
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065154Jy  sigma=1.208618
! Fit after  self-cal, rms=0.065168Jy  sigma=1.208611
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.565 mas, bmaj=14.14 mas, bpa=-1.315 degrees
! Estimated noise=0.331988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200172 Jy
! Component: 100  -  total flux cleaned = 0.000191592 Jy
! Component: 150  -  total flux cleaned = 0.000184706 Jy
! Component: 200  -  total flux cleaned = 0.000179099 Jy
! Total flux subtracted in 200 components = 0.000179099 Jy
! Clean residual min=-0.001440 max=0.001244 Jy/beam
! Clean residual mean=0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0529225 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 68 components and 0.0529225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065168Jy  sigma=1.208609
! Fit after  self-cal, rms=0.065178Jy  sigma=1.208593
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.90485e-06 Jy
! Component: 100  -  total flux cleaned = -1.24428e-05 Jy
! Component: 150  -  total flux cleaned = -1.85655e-05 Jy
! Component: 200  -  total flux cleaned = -2.12923e-05 Jy
! Total flux subtracted in 200 components = -2.12923e-05 Jy
! Clean residual min=-0.001431 max=0.001238 Jy/beam
! Clean residual mean=0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0529012 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 68 components and 0.0529012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065179Jy  sigma=1.208600
! Fit after  self-cal, rms=0.065179Jy  sigma=1.208593
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=8.489 mas, bpa=-3.132 degrees
! Estimated noise=0.267129 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.433 x 8.489 at -3.132 degrees (North through East)
! Clean map  min=-0.0013465  max=0.047154 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.72 mas, bmaj=7.025 mas, bpa=-4.484 degrees
! Estimated noise=0.431563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.035812 Jy
! Component: 100  -  total flux cleaned = 0.0442986 Jy
! Component: 150  -  total flux cleaned = 0.0482115 Jy
! Component: 200  -  total flux cleaned = 0.0504104 Jy
! Total flux subtracted in 200 components = 0.0504104 Jy
! Clean residual min=-0.002085 max=0.002177 Jy/beam
! Clean residual mean=-0.000002 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.0504104 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0504104 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=8.489 mas, bpa=-3.132 degrees
! Estimated noise=0.267129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149183 Jy
! Component: 100  -  total flux cleaned = 0.00202897 Jy
! Component: 150  -  total flux cleaned = 0.00213282 Jy
! Component: 200  -  total flux cleaned = 0.00222 Jy
! Total flux subtracted in 200 components = 0.00222 Jy
! Clean residual min=-0.001406 max=0.001143 Jy/beam
! Clean residual mean=0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.0526304 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.0526304 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.565 mas, bmaj=14.14 mas, bpa=-1.315 degrees
! Estimated noise=0.331988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028096 Jy
! Component: 100  -  total flux cleaned = 0.00029249 Jy
! Component: 150  -  total flux cleaned = 0.000301131 Jy
! Component: 200  -  total flux cleaned = 0.000301333 Jy
! Total flux subtracted in 200 components = 0.000301333 Jy
! Clean residual min=-0.001429 max=0.001250 Jy/beam
! Clean residual mean=0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0529318 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.4105e-06 Jy
! Component: 100  -  total flux cleaned = -1.24833e-05 Jy
! Component: 150  -  total flux cleaned = -1.53143e-05 Jy
! Component: 200  -  total flux cleaned = -1.81739e-05 Jy
! Total flux subtracted in 200 components = -1.81739e-05 Jy
! Clean residual min=-0.001432 max=0.001246 Jy/beam
! Clean residual mean=0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0529136 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.0529136 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=8.489 mas, bpa=-3.132 degrees
! Estimated noise=0.267129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000188969 Jy
! Component: 100  -  total flux cleaned = -0.00015985 Jy
! Component: 150  -  total flux cleaned = -0.000147624 Jy
! Component: 200  -  total flux cleaned = -0.000142376 Jy
! Total flux subtracted in 200 components = -0.000142376 Jy
! Clean residual min=-0.001396 max=0.001139 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.0527712 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 45 components and 0.0527712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065180Jy  sigma=1.208618
! Fit after  self-cal, rms=0.065179Jy  sigma=1.208608
wmodel J0953-0840_S_a_map.mod
! Writing 45 model components to file: J0953-0840_S_a_map.mod
wobs   J0953-0840_S_a_uvs.fits
! Writing UV FITS file: J0953-0840_S_a_uvs.fits
wwins  J0953-0840_S_a_map.win
! wwins: Wrote 1 windows to J0953-0840_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344723 Jy
! Component: 100  -  total flux cleaned = -0.000386752 Jy
! Component: 150  -  total flux cleaned = -0.000386522 Jy
! Component: 200  -  total flux cleaned = -0.000386534 Jy
! Component: 250  -  total flux cleaned = -0.000441474 Jy
! Component: 300  -  total flux cleaned = -0.000512615 Jy
! Component: 350  -  total flux cleaned = -0.000512939 Jy
! Component: 400  -  total flux cleaned = -0.000513295 Jy
! Component: 450  -  total flux cleaned = -0.0004804 Jy
! Component: 500  -  total flux cleaned = -0.000480666 Jy
! Component: 550  -  total flux cleaned = -0.000448408 Jy
! Component: 600  -  total flux cleaned = -0.000448221 Jy
! Component: 650  -  total flux cleaned = -0.000417076 Jy
! Component: 700  -  total flux cleaned = -0.000386366 Jy
! Component: 750  -  total flux cleaned = -0.000356231 Jy
! Component: 800  -  total flux cleaned = -0.00034131 Jy
! Component: 850  -  total flux cleaned = -0.000297185 Jy
! Component: 900  -  total flux cleaned = -0.000267839 Jy
! Component: 950  -  total flux cleaned = -0.000253269 Jy
! Component: 1000  -  total flux cleaned = -0.000196188 Jy
! Component: 1050  -  total flux cleaned = -0.000126438 Jy
! Component: 1100  -  total flux cleaned = -0.000112762 Jy
! Component: 1150  -  total flux cleaned = -7.17827e-05 Jy
! Component: 1200  -  total flux cleaned = -8.56317e-05 Jy
! Component: 1250  -  total flux cleaned = -5.90421e-05 Jy
! Component: 1300  -  total flux cleaned = -9.8821e-05 Jy
! Component: 1350  -  total flux cleaned = -9.89457e-05 Jy
! Component: 1400  -  total flux cleaned = -0.000112048 Jy
! Component: 1450  -  total flux cleaned = -0.000137724 Jy
! Component: 1500  -  total flux cleaned = -0.000175665 Jy
! Component: 1550  -  total flux cleaned = -0.000162904 Jy
! Component: 1600  -  total flux cleaned = -0.000150484 Jy
! Component: 1650  -  total flux cleaned = -0.000125697 Jy
! Component: 1700  -  total flux cleaned = -0.000113587 Jy
! Component: 1750  -  total flux cleaned = -0.000137854 Jy
! Component: 1800  -  total flux cleaned = -6.58419e-05 Jy
! Component: 1850  -  total flux cleaned = -6.59838e-05 Jy
! Component: 1900  -  total flux cleaned = -0.00012489 Jy
! Component: 1950  -  total flux cleaned = -0.000136641 Jy
! Component: 2000  -  total flux cleaned = -0.000136707 Jy
! Component: 2050  -  total flux cleaned = -0.000148175 Jy
! Component: 2100  -  total flux cleaned = -0.000148302 Jy
! Component: 2150  -  total flux cleaned = -0.000137089 Jy
! Component: 2200  -  total flux cleaned = -0.000136918 Jy
! Component: 2250  -  total flux cleaned = -0.000103579 Jy
! Component: 2300  -  total flux cleaned = -0.000103607 Jy
! Component: 2350  -  total flux cleaned = -9.27307e-05 Jy
! Component: 2400  -  total flux cleaned = -7.09513e-05 Jy
! Component: 2450  -  total flux cleaned = -7.10463e-05 Jy
! Component: 2500  -  total flux cleaned = -4.96628e-05 Jy
! Component: 2550  -  total flux cleaned = -3.90187e-05 Jy
! Component: 2600  -  total flux cleaned = -1.78914e-05 Jy
! Component: 2650  -  total flux cleaned = 3.03195e-06 Jy
! Component: 2700  -  total flux cleaned = 4.46438e-05 Jy
! Component: 2750  -  total flux cleaned = 5.49686e-05 Jy
! Component: 2800  -  total flux cleaned = 8.57629e-05 Jy
! Component: 2850  -  total flux cleaned = 0.000157059 Jy
! Component: 2900  -  total flux cleaned = 0.00017738 Jy
! Component: 2950  -  total flux cleaned = 0.000197486 Jy
! Component: 3000  -  total flux cleaned = 0.000247456 Jy
! Component: 3050  -  total flux cleaned = 0.00025747 Jy
! Component: 3100  -  total flux cleaned = 0.00027716 Jy
! Component: 3150  -  total flux cleaned = 0.000306754 Jy
! Component: 3200  -  total flux cleaned = 0.000326302 Jy
! Component: 3250  -  total flux cleaned = 0.000413276 Jy
! Component: 3300  -  total flux cleaned = 0.000451769 Jy
! Component: 3350  -  total flux cleaned = 0.000489975 Jy
! Component: 3400  -  total flux cleaned = 0.000528058 Jy
! Component: 3450  -  total flux cleaned = 0.000565894 Jy
! Component: 3500  -  total flux cleaned = 0.000556497 Jy
! Component: 3550  -  total flux cleaned = 0.000621854 Jy
! Component: 3600  -  total flux cleaned = 0.000631166 Jy
! Component: 3650  -  total flux cleaned = 0.00066801 Jy
! Component: 3700  -  total flux cleaned = 0.000723107 Jy
! Component: 3750  -  total flux cleaned = 0.000713958 Jy
! Component: 3800  -  total flux cleaned = 0.000786615 Jy
! Component: 3850  -  total flux cleaned = 0.000786585 Jy
! Component: 3900  -  total flux cleaned = 0.000831472 Jy
! Component: 3950  -  total flux cleaned = 0.000849287 Jy
! Component: 4000  -  total flux cleaned = 0.000875947 Jy
! Component: 4050  -  total flux cleaned = 0.000902457 Jy
! Total flux subtracted in 4096 components = 0.000867331 Jy
! Clean residual min=-0.000511 max=0.000531 Jy/beam
! Clean residual mean=-0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0536386 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 342 components and 0.0536385 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0953-0840_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.433 x 8.489 at -3.132 degrees (North through East)
! Clean map  min=-0.00088306  max=0.046891 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0953-0840_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0953-0840_S_a_map.mod
! Writing 342 model components to file: /vlbi/uf001/uvm//J0953-0840_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0953-0840_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0953-0840_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0953-0840_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J0953-0840_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0468905 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000162637 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04053 1.04053 2.08107 4.16214 8.32427 16.6485 33.2971 66.5942
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  288.313 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0953-0840_S_a_dfm.log closed on Sun Jan 13 21:16:53 2019