! Started logfile: /vlbi/uf001/uva//J0944+5202_S_dfm.log on Mon Jan 14 00:36:13 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0944+5202_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0944+5202_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.906043 visibilities/baseline/integration-bin.
! Found source: J0944+5202
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6972 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0944+5202_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.092159Jy  sigma=23.384204
! Fit after  self-cal, rms=0.665213Jy  sigma=14.674978
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.383 mas, bmaj=4.04 mas, bpa=3.87 degrees
! Estimated noise=0.554691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.259839 Jy
! Component: 100  -  total flux cleaned = 0.371443 Jy
! Total flux subtracted in 100 components = 0.371443 Jy
! Clean residual min=-0.020498 max=0.054567 Jy/beam
! Clean residual mean=-0.000255 rms=0.005963 Jy/beam
! Combined flux in latest and established models = 0.371443 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.371443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136539Jy  sigma=2.860888
! Fit after  self-cal, rms=0.133661Jy  sigma=2.780056
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0664083 Jy
! Component: 100  -  total flux cleaned = 0.102183 Jy
! Total flux subtracted in 100 components = 0.102183 Jy
! Clean residual min=-0.011142 max=0.033874 Jy/beam
! Clean residual mean=-0.000120 rms=0.003083 Jy/beam
! Combined flux in latest and established models = 0.473626 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 26 components and 0.473626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083632Jy  sigma=1.746664
! Fit after  self-cal, rms=0.082955Jy  sigma=1.726192
! Inverting map 
! Added new window around map position (2, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0312131 Jy
! Component: 100  -  total flux cleaned = 0.0487608 Jy
! Total flux subtracted in 100 components = 0.0487608 Jy
! Clean residual min=-0.008188 max=0.009583 Jy/beam
! Clean residual mean=-0.000059 rms=0.001926 Jy/beam
! Combined flux in latest and established models = 0.522387 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 31 components and 0.522387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067770Jy  sigma=1.409340
! Fit after  self-cal, rms=0.067369Jy  sigma=1.396938
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.915 mas, bmaj=4.988 mas, bpa=13.44 degrees
! Estimated noise=0.415502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159252 Jy
! Component: 100  -  total flux cleaned = 0.0253225 Jy
! Component: 150  -  total flux cleaned = 0.0314953 Jy
! Component: 200  -  total flux cleaned = 0.0357095 Jy
! Total flux subtracted in 200 components = 0.0357095 Jy
! Clean residual min=-0.004892 max=0.005701 Jy/beam
! Clean residual mean=-0.000015 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 0.558097 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 56 components and 0.558097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063136Jy  sigma=1.308223
! Fit after  self-cal, rms=0.062973Jy  sigma=1.302738
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.915 x 4.988 at 13.44 degrees (North through East)
! Clean map  min=-0.0043896  max=0.32835 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.96     KP        1.01     
!   LA        0.96     MK        0.96     NL        1.01     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.99     KP        1.01     
!   LA        0.97     MK        0.97     NL        1.05     OV        0.94     
!   PT        0.99     SC        1.23     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.97     MK        1.06     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.062973Jy  sigma=1.302738
! Fit after  self-cal, rms=0.060470Jy  sigma=1.235650
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.955 mas, bmaj=5.03 mas, bpa=11.89 degrees
! Estimated noise=0.41748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118483 Jy
! Component: 100  -  total flux cleaned = -0.00127378 Jy
! Component: 150  -  total flux cleaned = -0.00127434 Jy
! Component: 200  -  total flux cleaned = -0.0013411 Jy
! Total flux subtracted in 200 components = -0.0013411 Jy
! Clean residual min=-0.003781 max=0.003771 Jy/beam
! Clean residual mean=0.000020 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.556756 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.556756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060181Jy  sigma=1.230149
! Fit after  self-cal, rms=0.060167Jy  sigma=1.229134
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060167Jy  sigma=1.229134
! Fit after  self-cal, rms=0.057781Jy  sigma=1.189055
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.924 mas, bmaj=5.019 mas, bpa=13.28 degrees
! Estimated noise=0.414311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450325 Jy
! Component: 100  -  total flux cleaned = 0.000248801 Jy
! Component: 150  -  total flux cleaned = 7.73163e-05 Jy
! Component: 200  -  total flux cleaned = -0.000121575 Jy
! Total flux subtracted in 200 components = -0.000121575 Jy
! Clean residual min=-0.003169 max=0.002389 Jy/beam
! Clean residual mean=-0.000003 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.556634 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 79 components and 0.556634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057634Jy  sigma=1.185559
! Fit after  self-cal, rms=0.057621Jy  sigma=1.184908
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.77596e-05 Jy
! Component: 100  -  total flux cleaned = -6.50872e-05 Jy
! Component: 150  -  total flux cleaned = -0.000191045 Jy
! Component: 200  -  total flux cleaned = -0.000304477 Jy
! Total flux subtracted in 200 components = -0.000304477 Jy
! Clean residual min=-0.002939 max=0.002275 Jy/beam
! Clean residual mean=-0.000004 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.55633 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 85 components and 0.55633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057539Jy  sigma=1.183022
! Fit after  self-cal, rms=0.057524Jy  sigma=1.182559
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057524Jy  sigma=1.182559
! Fit after  self-cal, rms=0.057439Jy  sigma=1.182322
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.916 mas, bmaj=5.024 mas, bpa=13.67 degrees
! Estimated noise=0.41362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000385305 Jy
! Component: 100  -  total flux cleaned = 0.000243811 Jy
! Component: 150  -  total flux cleaned = 9.01576e-05 Jy
! Component: 200  -  total flux cleaned = -7.93864e-05 Jy
! Total flux subtracted in 200 components = -7.93864e-05 Jy
! Clean residual min=-0.002757 max=0.002203 Jy/beam
! Clean residual mean=-0.000004 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.55625 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.55625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057373Jy  sigma=1.180853
! Fit after  self-cal, rms=0.057364Jy  sigma=1.180543
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.12333e-05 Jy
! Component: 100  -  total flux cleaned = 8.3598e-06 Jy
! Component: 150  -  total flux cleaned = -8.28236e-05 Jy
! Component: 200  -  total flux cleaned = -0.000110506 Jy
! Total flux subtracted in 200 components = -0.000110506 Jy
! Clean residual min=-0.002615 max=0.002166 Jy/beam
! Clean residual mean=-0.000004 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.55614 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.55614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057322Jy  sigma=1.179589
! Fit after  self-cal, rms=0.057314Jy  sigma=1.179352
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057314Jy  sigma=1.179352
! Fit after  self-cal, rms=0.057303Jy  sigma=1.179248
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.929 mas, bmaj=8.775 mas, bpa=30.38 degrees
! Estimated noise=0.535347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.93597e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133499 Jy
! Component: 150  -  total flux cleaned = 0.00010671 Jy
! Component: 200  -  total flux cleaned = 6.86615e-05 Jy
! Total flux subtracted in 200 components = 6.86615e-05 Jy
! Clean residual min=-0.002359 max=0.003011 Jy/beam
! Clean residual mean=-0.000010 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.556209 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.556208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057283Jy  sigma=1.178970
! Fit after  self-cal, rms=0.057274Jy  sigma=1.178760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (23.5, 24.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242425 Jy
! Component: 100  -  total flux cleaned = 0.00319243 Jy
! Component: 150  -  total flux cleaned = 0.00343605 Jy
! Component: 200  -  total flux cleaned = 0.00346873 Jy
! Total flux subtracted in 200 components = 0.00346873 Jy
! Clean residual min=-0.002208 max=0.001869 Jy/beam
! Clean residual mean=-0.000007 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.559677 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 139 components and 0.559677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057229Jy  sigma=1.177865
! Fit after  self-cal, rms=0.057221Jy  sigma=1.177726
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.912 mas, bmaj=5.03 mas, bpa=13.93 degrees
! Estimated noise=0.413417 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.912 x 5.03 at 13.93 degrees (North through East)
! Clean map  min=-0.0021134  max=0.32563 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=4.074 mas, bpa=5.452 degrees
! Estimated noise=0.55339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.263062 Jy
! Component: 100  -  total flux cleaned = 0.379979 Jy
! Component: 150  -  total flux cleaned = 0.443429 Jy
! Component: 200  -  total flux cleaned = 0.482012 Jy
! Total flux subtracted in 200 components = 0.482012 Jy
! Clean residual min=-0.006509 max=0.019876 Jy/beam
! Clean residual mean=-0.000102 rms=0.002133 Jy/beam
! Combined flux in latest and established models = 0.482012 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.482012 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.912 mas, bmaj=5.03 mas, bpa=13.93 degrees
! Estimated noise=0.413417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0297577 Jy
! Component: 100  -  total flux cleaned = 0.0462718 Jy
! Component: 150  -  total flux cleaned = 0.0562211 Jy
! Component: 200  -  total flux cleaned = 0.0625324 Jy
! Total flux subtracted in 200 components = 0.0625324 Jy
! Clean residual min=-0.002500 max=0.003337 Jy/beam
! Clean residual mean=-0.000017 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.544544 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 0.544544 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00408837 Jy
! Component: 100  -  total flux cleaned = 0.00688383 Jy
! Component: 150  -  total flux cleaned = 0.00900261 Jy
! Component: 200  -  total flux cleaned = 0.0103456 Jy
! Total flux subtracted in 200 components = 0.0103456 Jy
! Clean residual min=-0.002066 max=0.001972 Jy/beam
! Clean residual mean=-0.000007 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.55489 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 77 components and 0.55489 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.929 mas, bmaj=8.775 mas, bpa=30.38 degrees
! Estimated noise=0.535347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218606 Jy
! Component: 100  -  total flux cleaned = 0.00353026 Jy
! Component: 150  -  total flux cleaned = 0.00403753 Jy
! Component: 200  -  total flux cleaned = 0.00436018 Jy
! Total flux subtracted in 200 components = 0.00436018 Jy
! Clean residual min=-0.002167 max=0.001830 Jy/beam
! Clean residual mean=-0.000008 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.55925 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.20821e-05 Jy
! Component: 100  -  total flux cleaned = 0.000174506 Jy
! Component: 150  -  total flux cleaned = 0.000249522 Jy
! Component: 200  -  total flux cleaned = 0.000272656 Jy
! Total flux subtracted in 200 components = 0.000272656 Jy
! Clean residual min=-0.002087 max=0.001743 Jy/beam
! Clean residual mean=-0.000008 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.559523 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 141 components and 0.559523 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.912 mas, bmaj=5.03 mas, bpa=13.93 degrees
! Estimated noise=0.413417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000567912 Jy
! Component: 100  -  total flux cleaned = -0.000524394 Jy
! Component: 150  -  total flux cleaned = -0.00043892 Jy
! Component: 200  -  total flux cleaned = -0.000356045 Jy
! Total flux subtracted in 200 components = -0.000356045 Jy
! Clean residual min=-0.001996 max=0.001868 Jy/beam
! Clean residual mean=-0.000003 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.559167 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 167 components and 0.559166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057035Jy  sigma=1.173695
! Fit after  self-cal, rms=0.057011Jy  sigma=1.173040
wmodel J0944+5202_S_map.mod
! Writing 167 model components to file: J0944+5202_S_map.mod
wobs   J0944+5202_S_uvs.fits
! Writing UV FITS file: J0944+5202_S_uvs.fits
wwins  J0944+5202_S_map.win
! wwins: Wrote 3 windows to J0944+5202_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000281523 Jy
! Component: 100  -  total flux cleaned = -0.000379151 Jy
! Component: 150  -  total flux cleaned = -0.000348396 Jy
! Component: 200  -  total flux cleaned = -0.000407931 Jy
! Component: 250  -  total flux cleaned = -0.000437316 Jy
! Component: 300  -  total flux cleaned = -0.000466267 Jy
! Component: 350  -  total flux cleaned = -0.000549244 Jy
! Component: 400  -  total flux cleaned = -0.000494835 Jy
! Component: 450  -  total flux cleaned = -0.000574766 Jy
! Component: 500  -  total flux cleaned = -0.000548658 Jy
! Component: 550  -  total flux cleaned = -0.000599896 Jy
! Component: 600  -  total flux cleaned = -0.000625267 Jy
! Component: 650  -  total flux cleaned = -0.000749084 Jy
! Component: 700  -  total flux cleaned = -0.000797632 Jy
! Component: 750  -  total flux cleaned = -0.000893878 Jy
! Component: 800  -  total flux cleaned = -0.000941167 Jy
! Component: 850  -  total flux cleaned = -0.000988067 Jy
! Component: 900  -  total flux cleaned = -0.00117174 Jy
! Component: 950  -  total flux cleaned = -0.00112622 Jy
! Component: 1000  -  total flux cleaned = -0.00117143 Jy
! Component: 1050  -  total flux cleaned = -0.00130405 Jy
! Component: 1100  -  total flux cleaned = -0.00134728 Jy
! Component: 1150  -  total flux cleaned = -0.00147676 Jy
! Component: 1200  -  total flux cleaned = -0.00149822 Jy
! Component: 1250  -  total flux cleaned = -0.0015617 Jy
! Component: 1300  -  total flux cleaned = -0.00166618 Jy
! Component: 1350  -  total flux cleaned = -0.00170763 Jy
! Component: 1400  -  total flux cleaned = -0.00178924 Jy
! Component: 1450  -  total flux cleaned = -0.00193073 Jy
! Component: 1500  -  total flux cleaned = -0.00201073 Jy
! Component: 1550  -  total flux cleaned = -0.00203073 Jy
! Component: 1600  -  total flux cleaned = -0.00207012 Jy
! Component: 1650  -  total flux cleaned = -0.00214766 Jy
! Component: 1700  -  total flux cleaned = -0.00222445 Jy
! Component: 1750  -  total flux cleaned = -0.00222454 Jy
! Component: 1800  -  total flux cleaned = -0.00237533 Jy
! Component: 1850  -  total flux cleaned = -0.00239394 Jy
! Component: 1900  -  total flux cleaned = -0.00248604 Jy
! Component: 1950  -  total flux cleaned = -0.00246787 Jy
! Component: 2000  -  total flux cleaned = -0.00261275 Jy
! Component: 2050  -  total flux cleaned = -0.00261287 Jy
! Component: 2100  -  total flux cleaned = -0.0027373 Jy
! Component: 2150  -  total flux cleaned = -0.00278996 Jy
! Component: 2200  -  total flux cleaned = -0.0027547 Jy
! Component: 2250  -  total flux cleaned = -0.00285871 Jy
! Component: 2300  -  total flux cleaned = -0.00285888 Jy
! Component: 2350  -  total flux cleaned = -0.00291013 Jy
! Component: 2400  -  total flux cleaned = -0.00294379 Jy
! Component: 2450  -  total flux cleaned = -0.00296069 Jy
! Component: 2500  -  total flux cleaned = -0.00311005 Jy
! Component: 2550  -  total flux cleaned = -0.00301129 Jy
! Component: 2600  -  total flux cleaned = -0.00314202 Jy
! Component: 2650  -  total flux cleaned = -0.00317459 Jy
! Component: 2700  -  total flux cleaned = -0.00325502 Jy
! Component: 2750  -  total flux cleaned = -0.00325491 Jy
! Component: 2800  -  total flux cleaned = -0.00333394 Jy
! Component: 2850  -  total flux cleaned = -0.00330274 Jy
! Component: 2900  -  total flux cleaned = -0.00338054 Jy
! Component: 2950  -  total flux cleaned = -0.00339603 Jy
! Component: 3000  -  total flux cleaned = -0.00347242 Jy
! Component: 3050  -  total flux cleaned = -0.00344194 Jy
! Component: 3100  -  total flux cleaned = -0.00357758 Jy
! Component: 3150  -  total flux cleaned = -0.00357759 Jy
! Component: 3200  -  total flux cleaned = -0.00359237 Jy
! Component: 3250  -  total flux cleaned = -0.00360718 Jy
! Component: 3300  -  total flux cleaned = -0.00368053 Jy
! Component: 3350  -  total flux cleaned = -0.00373869 Jy
! Component: 3400  -  total flux cleaned = -0.00375308 Jy
! Component: 3450  -  total flux cleaned = -0.00381045 Jy
! Component: 3500  -  total flux cleaned = -0.00391024 Jy
! Component: 3550  -  total flux cleaned = -0.00391017 Jy
! Component: 3600  -  total flux cleaned = -0.00392442 Jy
! Component: 3650  -  total flux cleaned = -0.00396629 Jy
! Component: 3700  -  total flux cleaned = -0.00409109 Jy
! Component: 3750  -  total flux cleaned = -0.00410494 Jy
! Component: 3800  -  total flux cleaned = -0.00418718 Jy
! Component: 3850  -  total flux cleaned = -0.00424149 Jy
! Component: 3900  -  total flux cleaned = -0.00429551 Jy
! Component: 3950  -  total flux cleaned = -0.00434926 Jy
! Component: 4000  -  total flux cleaned = -0.00436272 Jy
! Component: 4050  -  total flux cleaned = -0.00441583 Jy
! Total flux subtracted in 4096 components = -0.00442904 Jy
! Clean residual min=-0.000825 max=0.000927 Jy/beam
! Clean residual mean=-0.000002 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.554737 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 463 components and 0.554738 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0944+5202_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.912 x 5.03 at 13.93 degrees (North through East)
! Clean map  min=-0.0014713  max=0.32439 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0944+5202_S_map.fits
wmodel /vlbi/uf001/uva//J0944+5202_S_map.mod
! Writing 463 model components to file: /vlbi/uf001/uva//J0944+5202_S_map.mod
wobs   /vlbi/uf001/uva//J0944+5202_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0944+5202_S_uvs.fits
wwins  /vlbi/uf001/uva//J0944+5202_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0944+5202_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.324389 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000230825 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.213471 0.213471 0.426941 0.853882 1.70776 3.41553 6.83106 13.6621 27.3242 54.6485
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.324 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1405.34 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0944+5202_S_dfm.log closed on Mon Jan 14 00:36:17 2019