! Started logfile: /vlbi/uf001/uva//J0932-3405_S_dfm.log on Mon Jan 14 00:30:46 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0932-3405_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0932-3405_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.887963 visibilities/baseline/integration-bin.
! Found source: J0932-3405
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5754 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0932-3405_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.030997Jy  sigma=13.917237
! Fit after  self-cal, rms=0.843269Jy  sigma=11.357207
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.489 mas, bmaj=6.711 mas, bpa=-5.434 degrees
! Estimated noise=1.03012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.115675 Jy
! Component: 100  -  total flux cleaned = 0.175178 Jy
! Total flux subtracted in 100 components = 0.175178 Jy
! Clean residual min=-0.011481 max=0.030986 Jy/beam
! Clean residual mean=-0.000027 rms=0.004474 Jy/beam
! Combined flux in latest and established models = 0.175178 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.175178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135713Jy  sigma=1.661920
! Fit after  self-cal, rms=0.135069Jy  sigma=1.654033
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0376964 Jy
! Component: 100  -  total flux cleaned = 0.0614378 Jy
! Total flux subtracted in 100 components = 0.0614378 Jy
! Clean residual min=-0.008484 max=0.016640 Jy/beam
! Clean residual mean=-0.000048 rms=0.002754 Jy/beam
! Combined flux in latest and established models = 0.236616 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 68 components and 0.236616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118395Jy  sigma=1.383151
! Fit after  self-cal, rms=0.118285Jy  sigma=1.381713
! Inverting map 
! Added new window around map position (3.5, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180934 Jy
! Component: 100  -  total flux cleaned = 0.0301235 Jy
! Total flux subtracted in 100 components = 0.0301235 Jy
! Clean residual min=-0.006623 max=0.011764 Jy/beam
! Clean residual mean=-0.000057 rms=0.002110 Jy/beam
! Combined flux in latest and established models = 0.26674 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 90 components and 0.26674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113858Jy  sigma=1.305509
! Fit after  self-cal, rms=0.113743Jy  sigma=1.303640
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.953 mas, bmaj=7.826 mas, bpa=-5.146 degrees
! Estimated noise=0.71393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151172 Jy
! Component: 100  -  total flux cleaned = 0.0239904 Jy
! Component: 150  -  total flux cleaned = 0.0293593 Jy
! Component: 200  -  total flux cleaned = 0.0326429 Jy
! Total flux subtracted in 200 components = 0.0326429 Jy
! Clean residual min=-0.006688 max=0.011409 Jy/beam
! Clean residual mean=-0.000109 rms=0.002081 Jy/beam
! Combined flux in latest and established models = 0.299383 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 103 components and 0.299383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111778Jy  sigma=1.266150
! Fit after  self-cal, rms=0.111702Jy  sigma=1.263981
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.953 x 7.826 at -5.146 degrees (North through East)
! Clean map  min=-0.0064518  max=0.13306 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.97     HN        1.25     KP        0.97     
!   LA        0.95     MK        1.09     NL        1.20     OV        0.97     
!   PT        0.95     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        1.33     KP        1.00     
!   LA        0.92     MK        0.97     NL        1.25     OV        1.02     
!   PT        0.92     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        0.96     HN        1.32     KP        0.96     
!   LA        0.96     MK        1.04     NL        1.14     OV        0.95     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.111702Jy  sigma=1.263981
! Fit after  self-cal, rms=0.125069Jy  sigma=1.226409
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.993 mas, bmaj=7.873 mas, bpa=-4.81 degrees
! Estimated noise=0.740756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369635 Jy
! Component: 100  -  total flux cleaned = -0.000542511 Jy
! Component: 150  -  total flux cleaned = -0.000762673 Jy
! Component: 200  -  total flux cleaned = -0.000947625 Jy
! Total flux subtracted in 200 components = -0.000947625 Jy
! Clean residual min=-0.004729 max=0.004856 Jy/beam
! Clean residual mean=-0.000016 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 0.298435 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 116 components and 0.298435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124906Jy  sigma=1.225122
! Fit after  self-cal, rms=0.125166Jy  sigma=1.224566
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125166Jy  sigma=1.224566
! Fit after  self-cal, rms=0.126708Jy  sigma=1.224407
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.992 mas, bmaj=7.864 mas, bpa=-4.732 degrees
! Estimated noise=0.743734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.00993e-05 Jy
! Component: 100  -  total flux cleaned = -0.000139339 Jy
! Component: 150  -  total flux cleaned = -0.000310461 Jy
! Component: 200  -  total flux cleaned = -0.000410899 Jy
! Total flux subtracted in 200 components = -0.000410899 Jy
! Clean residual min=-0.004703 max=0.004696 Jy/beam
! Clean residual mean=-0.000014 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.298024 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 120 components and 0.298024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126602Jy  sigma=1.223734
! Fit after  self-cal, rms=0.126603Jy  sigma=1.223646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00037879 Jy
! Component: 100  -  total flux cleaned = -0.000468822 Jy
! Component: 150  -  total flux cleaned = -0.000509512 Jy
! Component: 200  -  total flux cleaned = -0.000582969 Jy
! Total flux subtracted in 200 components = -0.000582969 Jy
! Clean residual min=-0.004691 max=0.004786 Jy/beam
! Clean residual mean=-0.000015 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.297441 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 126 components and 0.297441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126557Jy  sigma=1.223322
! Fit after  self-cal, rms=0.126545Jy  sigma=1.223284
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126545Jy  sigma=1.223284
! Fit after  self-cal, rms=0.123930Jy  sigma=1.194048
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.001 mas, bmaj=7.862 mas, bpa=-4.772 degrees
! Estimated noise=0.745636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000963611 Jy
! Component: 100  -  total flux cleaned = -0.00120367 Jy
! Component: 150  -  total flux cleaned = -0.00128296 Jy
! Component: 200  -  total flux cleaned = -0.00135131 Jy
! Total flux subtracted in 200 components = -0.00135131 Jy
! Clean residual min=-0.003779 max=0.003390 Jy/beam
! Clean residual mean=0.000012 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.29609 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 133 components and 0.29609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123860Jy  sigma=1.193775
! Fit after  self-cal, rms=0.123897Jy  sigma=1.193419
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361997 Jy
! Component: 100  -  total flux cleaned = -0.000429845 Jy
! Component: 150  -  total flux cleaned = -0.000429831 Jy
! Component: 200  -  total flux cleaned = -0.000457507 Jy
! Total flux subtracted in 200 components = -0.000457507 Jy
! Clean residual min=-0.003800 max=0.003483 Jy/beam
! Clean residual mean=0.000010 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.295632 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 137 components and 0.295632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123862Jy  sigma=1.193271
! Fit after  self-cal, rms=0.123846Jy  sigma=1.193233
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123846Jy  sigma=1.193233
! Fit after  self-cal, rms=0.124773Jy  sigma=1.193134
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.379 mas, bmaj=23.22 mas, bpa=-0.6396 degrees
! Estimated noise=0.960206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000167912 Jy
! Component: 100  -  total flux cleaned = -0.000149342 Jy
! Component: 150  -  total flux cleaned = -0.00010113 Jy
! Component: 200  -  total flux cleaned = -8.71709e-05 Jy
! Total flux subtracted in 200 components = -8.71709e-05 Jy
! Clean residual min=-0.003395 max=0.003136 Jy/beam
! Clean residual mean=0.000033 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.295545 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 139 components and 0.295545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124762Jy  sigma=1.193111
! Fit after  self-cal, rms=0.124761Jy  sigma=1.193066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.2383e-05 Jy
! Component: 100  -  total flux cleaned = -3.22008e-05 Jy
! Component: 150  -  total flux cleaned = -6.7729e-06 Jy
! Component: 200  -  total flux cleaned = 4.87845e-06 Jy
! Total flux subtracted in 200 components = 4.87845e-06 Jy
! Clean residual min=-0.003393 max=0.003149 Jy/beam
! Clean residual mean=0.000033 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.29555 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 140 components and 0.29555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124755Jy  sigma=1.193087
! Fit after  self-cal, rms=0.124747Jy  sigma=1.193051
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.004 mas, bmaj=7.858 mas, bpa=-4.87 degrees
! Estimated noise=0.746269 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.004 x 7.858 at -4.87 degrees (North through East)
! Clean map  min=-0.0035983  max=0.14172 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.525 mas, bmaj=6.685 mas, bpa=-5.008 degrees
! Estimated noise=1.09406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122962 Jy
! Component: 100  -  total flux cleaned = 0.185396 Jy
! Component: 150  -  total flux cleaned = 0.222858 Jy
! Component: 200  -  total flux cleaned = 0.246133 Jy
! Total flux subtracted in 200 components = 0.246133 Jy
! Clean residual min=-0.006483 max=0.012833 Jy/beam
! Clean residual mean=0.000011 rms=0.002022 Jy/beam
! Combined flux in latest and established models = 0.246133 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 61 model components to the UV plane model.
! The established model now contains 61 components and 0.246133 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.004 mas, bmaj=7.858 mas, bpa=-4.87 degrees
! Estimated noise=0.746269 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213342 Jy
! Component: 100  -  total flux cleaned = 0.0329289 Jy
! Component: 150  -  total flux cleaned = 0.039667 Jy
! Component: 200  -  total flux cleaned = 0.043816 Jy
! Total flux subtracted in 200 components = 0.043816 Jy
! Clean residual min=-0.003923 max=0.003341 Jy/beam
! Clean residual mean=0.000010 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.289949 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 127 components and 0.289949 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.379 mas, bmaj=23.22 mas, bpa=-0.6396 degrees
! Estimated noise=0.960206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00397641 Jy
! Component: 100  -  total flux cleaned = 0.00580546 Jy
! Component: 150  -  total flux cleaned = 0.00670248 Jy
! Component: 200  -  total flux cleaned = 0.00688049 Jy
! Total flux subtracted in 200 components = 0.00688049 Jy
! Clean residual min=-0.003307 max=0.003158 Jy/beam
! Clean residual mean=0.000038 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.29683 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.91796e-05 Jy
! Component: 100  -  total flux cleaned = 0.000115599 Jy
! Component: 150  -  total flux cleaned = 0.00016951 Jy
! Component: 200  -  total flux cleaned = 0.000219948 Jy
! Total flux subtracted in 200 components = 0.000219948 Jy
! Clean residual min=-0.003267 max=0.003131 Jy/beam
! Clean residual mean=0.000039 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.29705 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 155 components and 0.29705 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.004 mas, bmaj=7.858 mas, bpa=-4.87 degrees
! Estimated noise=0.746269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000250806 Jy
! Component: 100  -  total flux cleaned = -0.00028997 Jy
! Component: 150  -  total flux cleaned = -0.000320929 Jy
! Component: 200  -  total flux cleaned = -0.000291777 Jy
! Total flux subtracted in 200 components = -0.000291777 Jy
! Clean residual min=-0.003481 max=0.003367 Jy/beam
! Clean residual mean=0.000019 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.296758 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 165 components and 0.296758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124593Jy  sigma=1.191828
! Fit after  self-cal, rms=0.124511Jy  sigma=1.191466
wmodel J0932-3405_S_map.mod
! Writing 165 model components to file: J0932-3405_S_map.mod
wobs   J0932-3405_S_uvs.fits
! Writing UV FITS file: J0932-3405_S_uvs.fits
wwins  J0932-3405_S_map.win
! wwins: Wrote 3 windows to J0932-3405_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000674873 Jy
! Component: 100  -  total flux cleaned = -0.00116306 Jy
! Component: 150  -  total flux cleaned = -0.0016243 Jy
! Component: 200  -  total flux cleaned = -0.00167458 Jy
! Component: 250  -  total flux cleaned = -0.0017228 Jy
! Component: 300  -  total flux cleaned = -0.00154177 Jy
! Component: 350  -  total flux cleaned = -0.00132011 Jy
! Component: 400  -  total flux cleaned = -0.000975011 Jy
! Component: 450  -  total flux cleaned = -0.000806524 Jy
! Component: 500  -  total flux cleaned = -0.000600737 Jy
! Component: 550  -  total flux cleaned = -0.000319616 Jy
! Component: 600  -  total flux cleaned = -0.00016351 Jy
! Component: 650  -  total flux cleaned = -8.61554e-05 Jy
! Component: 700  -  total flux cleaned = 2.74785e-05 Jy
! Component: 750  -  total flux cleaned = 0.000175367 Jy
! Component: 800  -  total flux cleaned = 0.000176075 Jy
! Component: 850  -  total flux cleaned = 0.000390251 Jy
! Component: 900  -  total flux cleaned = 0.000529942 Jy
! Component: 950  -  total flux cleaned = 0.000668018 Jy
! Component: 1000  -  total flux cleaned = 0.000904253 Jy
! Component: 1050  -  total flux cleaned = 0.00110369 Jy
! Component: 1100  -  total flux cleaned = 0.00136511 Jy
! Component: 1150  -  total flux cleaned = 0.0015266 Jy
! Component: 1200  -  total flux cleaned = 0.00178112 Jy
! Component: 1250  -  total flux cleaned = 0.00203183 Jy
! Component: 1300  -  total flux cleaned = 0.00240298 Jy
! Component: 1350  -  total flux cleaned = 0.00255519 Jy
! Component: 1400  -  total flux cleaned = 0.00279611 Jy
! Component: 1450  -  total flux cleaned = 0.00291518 Jy
! Component: 1500  -  total flux cleaned = 0.0031796 Jy
! Component: 1550  -  total flux cleaned = 0.00338271 Jy
! Component: 1600  -  total flux cleaned = 0.00358322 Jy
! Component: 1650  -  total flux cleaned = 0.00383799 Jy
! Component: 1700  -  total flux cleaned = 0.00409013 Jy
! Component: 1750  -  total flux cleaned = 0.00428378 Jy
! Component: 1800  -  total flux cleaned = 0.00439325 Jy
! Component: 1850  -  total flux cleaned = 0.00461069 Jy
! Component: 1900  -  total flux cleaned = 0.00482528 Jy
! Component: 1950  -  total flux cleaned = 0.00498485 Jy
! Component: 2000  -  total flux cleaned = 0.00527339 Jy
! Component: 2050  -  total flux cleaned = 0.00540331 Jy
! Component: 2100  -  total flux cleaned = 0.00568561 Jy
! Component: 2150  -  total flux cleaned = 0.00573635 Jy
! Component: 2200  -  total flux cleaned = 0.00593826 Jy
! Component: 2250  -  total flux cleaned = 0.00606287 Jy
! Component: 2300  -  total flux cleaned = 0.00626058 Jy
! Component: 2350  -  total flux cleaned = 0.00630941 Jy
! Component: 2400  -  total flux cleaned = 0.0065032 Jy
! Component: 2450  -  total flux cleaned = 0.00664696 Jy
! Component: 2500  -  total flux cleaned = 0.00669424 Jy
! Component: 2550  -  total flux cleaned = 0.00683583 Jy
! Component: 2600  -  total flux cleaned = 0.006906 Jy
! Component: 2650  -  total flux cleaned = 0.00699877 Jy
! Component: 2700  -  total flux cleaned = 0.00709064 Jy
! Component: 2750  -  total flux cleaned = 0.00722718 Jy
! Component: 2800  -  total flux cleaned = 0.00724973 Jy
! Component: 2850  -  total flux cleaned = 0.00736174 Jy
! Component: 2900  -  total flux cleaned = 0.00742836 Jy
! Component: 2950  -  total flux cleaned = 0.0075387 Jy
! Component: 3000  -  total flux cleaned = 0.00766967 Jy
! Component: 3050  -  total flux cleaned = 0.00782135 Jy
! Component: 3100  -  total flux cleaned = 0.00779981 Jy
! Component: 3150  -  total flux cleaned = 0.00792789 Jy
! Component: 3200  -  total flux cleaned = 0.00805488 Jy
! Component: 3250  -  total flux cleaned = 0.00811795 Jy
! Component: 3300  -  total flux cleaned = 0.00820131 Jy
! Component: 3350  -  total flux cleaned = 0.00832542 Jy
! Component: 3400  -  total flux cleaned = 0.00848955 Jy
! Component: 3450  -  total flux cleaned = 0.00846908 Jy
! Component: 3500  -  total flux cleaned = 0.00865103 Jy
! Component: 3550  -  total flux cleaned = 0.00865086 Jy
! Component: 3600  -  total flux cleaned = 0.00871074 Jy
! Component: 3650  -  total flux cleaned = 0.00882928 Jy
! Component: 3700  -  total flux cleaned = 0.00894702 Jy
! Component: 3750  -  total flux cleaned = 0.00902487 Jy
! Component: 3800  -  total flux cleaned = 0.00914051 Jy
! Component: 3850  -  total flux cleaned = 0.00919799 Jy
! Component: 3900  -  total flux cleaned = 0.00925501 Jy
! Component: 3950  -  total flux cleaned = 0.00933089 Jy
! Component: 4000  -  total flux cleaned = 0.00940614 Jy
! Component: 4050  -  total flux cleaned = 0.00948087 Jy
! Total flux subtracted in 4096 components = 0.00959203 Jy
! Clean residual min=-0.001109 max=0.001065 Jy/beam
! Clean residual mean=0.000011 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.30635 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 435 components and 0.30635 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0932-3405_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.004 x 7.858 at -4.87 degrees (North through East)
! Clean map  min=-0.0024906  max=0.14751 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0932-3405_S_map.fits
wmodel /vlbi/uf001/uva//J0932-3405_S_map.mod
! Writing 435 model components to file: /vlbi/uf001/uva//J0932-3405_S_map.mod
wobs   /vlbi/uf001/uva//J0932-3405_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0932-3405_S_uvs.fits
wwins  /vlbi/uf001/uva//J0932-3405_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0932-3405_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.147507 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000327889 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.666861 0.666861 1.33372 2.66744 5.33489 10.6698 21.3396 42.6791 85.3582
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.147 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  449.868 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0932-3405_S_dfm.log closed on Mon Jan 14 00:30:51 2019