! Started logfile: /vlbi/uf001/uva//J0925+0019_X_dfm.log on Mon Jan 14 00:25:58 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0925+0019_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0925+0019_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J0925+0019
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0925+0019_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.156350Jy  sigma=21.569246
! Fit after  self-cal, rms=0.464857Jy  sigma=9.128148
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6862 mas, bmaj=1.656 mas, bpa=-0.4208 degrees
! Estimated noise=0.408314 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.402886 Jy
! Component: 100  -  total flux cleaned = 0.53787 Jy
! Total flux subtracted in 100 components = 0.53787 Jy
! Clean residual min=-0.028175 max=0.054636 Jy/beam
! Clean residual mean=0.000004 rms=0.003980 Jy/beam
! Combined flux in latest and established models = 0.53787 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.53787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119831Jy  sigma=2.175428
! Fit after  self-cal, rms=0.119460Jy  sigma=2.168476
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0557793 Jy
! Component: 100  -  total flux cleaned = 0.0794972 Jy
! Total flux subtracted in 100 components = 0.0794972 Jy
! Clean residual min=-0.015081 max=0.021483 Jy/beam
! Clean residual mean=0.000001 rms=0.002484 Jy/beam
! Combined flux in latest and established models = 0.617368 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.617368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085189Jy  sigma=1.562718
! Fit after  self-cal, rms=0.085063Jy  sigma=1.560330
! Inverting map 
! Added new window around map position (-0.4, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011245 Jy
! Component: 100  -  total flux cleaned = 0.0155305 Jy
! Total flux subtracted in 100 components = 0.0155305 Jy
! Clean residual min=-0.012580 max=0.017018 Jy/beam
! Clean residual mean=0.000001 rms=0.002244 Jy/beam
! Combined flux in latest and established models = 0.632898 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.632898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081338Jy  sigma=1.498572
! Fit after  self-cal, rms=0.081141Jy  sigma=1.494960
! Inverting map 
! Added new window around map position (-1.4, -3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156589 Jy
! Component: 100  -  total flux cleaned = 0.0236122 Jy
! Total flux subtracted in 100 components = 0.0236122 Jy
! Clean residual min=-0.011697 max=0.015037 Jy/beam
! Clean residual mean=0.000001 rms=0.002023 Jy/beam
! Combined flux in latest and established models = 0.65651 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.65651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076634Jy  sigma=1.413457
! Fit after  self-cal, rms=0.076322Jy  sigma=1.407663
! Inverting map 
! Added new window around map position (1.4, 3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00913096 Jy
! Component: 100  -  total flux cleaned = 0.0137045 Jy
! Total flux subtracted in 100 components = 0.0137045 Jy
! Clean residual min=-0.011055 max=0.010072 Jy/beam
! Clean residual mean=0.000001 rms=0.001807 Jy/beam
! Combined flux in latest and established models = 0.670215 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.670215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073447Jy  sigma=1.354636
! Fit after  self-cal, rms=0.073367Jy  sigma=1.353348
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8718 mas, bmaj=2.003 mas, bpa=-1.096 degrees
! Estimated noise=0.290916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 48).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148715 Jy
! Component: 100  -  total flux cleaned = 0.0253427 Jy
! Component: 150  -  total flux cleaned = 0.0338117 Jy
! Component: 200  -  total flux cleaned = 0.0408512 Jy
! Total flux subtracted in 200 components = 0.0408512 Jy
! Clean residual min=-0.011246 max=0.010871 Jy/beam
! Clean residual mean=-0.000006 rms=0.002254 Jy/beam
! Combined flux in latest and established models = 0.711066 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 82 components and 0.711066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069128Jy  sigma=1.270561
! Fit after  self-cal, rms=0.068955Jy  sigma=1.267641
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8718 x 2.003 at -1.096 degrees (North through East)
! Clean map  min=-0.0099294  max=0.52946 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.95     KP        0.98     
!   LA        1.02     MK        0.99     NL        1.07     OV        0.93     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.95     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.07     OV        0.94     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.96     KP        0.98     
!   LA        1.01     MK        0.99     NL        1.08     OV        0.93     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.96     KP        0.98     
!   LA        1.02     MK        1.00     NL        1.08     OV        0.94     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.97     KP        0.99     
!   LA        1.01     MK        1.01     NL        1.08     OV        0.94     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.01     NL        1.08     OV        0.93     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        0.96     KP        0.98     
!   LA        1.02     MK        1.01     NL        1.09     OV        0.94     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        0.97     KP        1.00     
!   LA        1.01     MK        1.03     NL        1.08     OV        0.93     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.97     KP        0.99     
!   LA        1.03     MK        1.01     NL        1.10     OV        0.94     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.98     KP        0.99     
!   LA        1.01     MK        1.02     NL        1.10     OV        0.94     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.97     KP        0.99     
!   LA        1.01     MK        1.00     NL        1.10     OV        0.94     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.97     KP        1.01     
!   LA        1.03     MK        1.03     NL        1.10     OV        0.93     
!   PT        0.95     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.068955Jy  sigma=1.267641
! Fit after  self-cal, rms=0.059609Jy  sigma=1.091271
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8723 mas, bmaj=2.016 mas, bpa=-1.051 degrees
! Estimated noise=0.290496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00743831 Jy
! Component: 100  -  total flux cleaned = -0.00808949 Jy
! Component: 150  -  total flux cleaned = -0.00761637 Jy
! Component: 200  -  total flux cleaned = -0.007207 Jy
! Total flux subtracted in 200 components = -0.007207 Jy
! Clean residual min=-0.004471 max=0.005287 Jy/beam
! Clean residual mean=-0.000003 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.703859 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 99 components and 0.703859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058412Jy  sigma=1.069072
! Fit after  self-cal, rms=0.058405Jy  sigma=1.068765
! Inverting map 
! Added new window around map position (6.8, -13.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296309 Jy
! Component: 100  -  total flux cleaned = 0.0033564 Jy
! Component: 150  -  total flux cleaned = 0.00380645 Jy
! Component: 200  -  total flux cleaned = 0.0042183 Jy
! Total flux subtracted in 200 components = 0.0042183 Jy
! Clean residual min=-0.003851 max=0.004513 Jy/beam
! Clean residual mean=-0.000003 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.708078 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.708078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057826Jy  sigma=1.058165
! Fit after  self-cal, rms=0.057804Jy  sigma=1.057720
! Inverting map 
! Added new window around map position (0.2, -5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451424 Jy
! Component: 100  -  total flux cleaned = 0.00601213 Jy
! Component: 150  -  total flux cleaned = 0.00682822 Jy
! Component: 200  -  total flux cleaned = 0.00737765 Jy
! Total flux subtracted in 200 components = 0.00737765 Jy
! Clean residual min=-0.003535 max=0.003810 Jy/beam
! Clean residual mean=-0.000003 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.715455 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 132 components and 0.715455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057324Jy  sigma=1.048507
! Fit after  self-cal, rms=0.057306Jy  sigma=1.048232
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057306Jy  sigma=1.048232
! Fit after  self-cal, rms=0.056450Jy  sigma=1.033544
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8722 mas, bmaj=2.017 mas, bpa=-0.9929 degrees
! Estimated noise=0.290625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00297164 Jy
! Component: 100  -  total flux cleaned = -0.0034704 Jy
! Component: 150  -  total flux cleaned = -0.00339256 Jy
! Component: 200  -  total flux cleaned = -0.00325205 Jy
! Total flux subtracted in 200 components = -0.00325205 Jy
! Clean residual min=-0.002754 max=0.002967 Jy/beam
! Clean residual mean=-0.000001 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.712203 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 142 components and 0.712203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056154Jy  sigma=1.028014
! Fit after  self-cal, rms=0.056145Jy  sigma=1.027896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273894 Jy
! Component: 100  -  total flux cleaned = 0.00297685 Jy
! Component: 150  -  total flux cleaned = 0.00297588 Jy
! Component: 200  -  total flux cleaned = 0.00303703 Jy
! Total flux subtracted in 200 components = 0.00303703 Jy
! Clean residual min=-0.002489 max=0.002627 Jy/beam
! Clean residual mean=-0.000001 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.71524 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 163 components and 0.71524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055942Jy  sigma=1.023942
! Fit after  self-cal, rms=0.055922Jy  sigma=1.023676
! Inverting map 
! Added new window around map position (-0.2, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166156 Jy
! Component: 100  -  total flux cleaned = 0.00220015 Jy
! Component: 150  -  total flux cleaned = 0.00231407 Jy
! Component: 200  -  total flux cleaned = 0.00253252 Jy
! Total flux subtracted in 200 components = 0.00253252 Jy
! Clean residual min=-0.002335 max=0.002525 Jy/beam
! Clean residual mean=-0.000000 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.717773 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 178 components and 0.717773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055772Jy  sigma=1.020699
! Fit after  self-cal, rms=0.055763Jy  sigma=1.020604
! Inverting map 
! Added new window around map position (2.6, 16.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022758 Jy
! Component: 100  -  total flux cleaned = 0.0034841 Jy
! Component: 150  -  total flux cleaned = 0.00396587 Jy
! Component: 200  -  total flux cleaned = 0.0042154 Jy
! Total flux subtracted in 200 components = 0.0042154 Jy
! Clean residual min=-0.002159 max=0.002031 Jy/beam
! Clean residual mean=-0.000001 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.721988 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 193 components and 0.721988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055631Jy  sigma=1.018048
! Fit after  self-cal, rms=0.055620Jy  sigma=1.017881
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055620Jy  sigma=1.017881
! Fit after  self-cal, rms=0.055540Jy  sigma=1.016891
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8719 mas, bmaj=2.017 mas, bpa=-0.9565 degrees
! Estimated noise=0.29059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00168749 Jy
! Component: 100  -  total flux cleaned = -0.00259001 Jy
! Component: 150  -  total flux cleaned = -0.00249403 Jy
! Component: 200  -  total flux cleaned = -0.00222507 Jy
! Total flux subtracted in 200 components = -0.00222507 Jy
! Clean residual min=-0.001957 max=0.001869 Jy/beam
! Clean residual mean=-0.000001 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.719763 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 199 components and 0.719763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055426Jy  sigma=1.014833
! Fit after  self-cal, rms=0.055420Jy  sigma=1.014753
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157681 Jy
! Component: 100  -  total flux cleaned = 0.000539799 Jy
! Component: 150  -  total flux cleaned = 0.000739119 Jy
! Component: 200  -  total flux cleaned = 0.000928174 Jy
! Total flux subtracted in 200 components = 0.000928174 Jy
! Clean residual min=-0.001862 max=0.001797 Jy/beam
! Clean residual mean=-0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.720691 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 208 components and 0.720692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055367Jy  sigma=1.013730
! Fit after  self-cal, rms=0.055363Jy  sigma=1.013687
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055363Jy  sigma=1.013687
! Fit after  self-cal, rms=0.055313Jy  sigma=1.013236
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.159 mas, bmaj=3.308 mas, bpa=1.299 degrees
! Estimated noise=0.383973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109372 Jy
! Component: 100  -  total flux cleaned = -0.00135374 Jy
! Component: 150  -  total flux cleaned = -0.00157162 Jy
! Component: 200  -  total flux cleaned = -0.00141952 Jy
! Total flux subtracted in 200 components = -0.00141952 Jy
! Clean residual min=-0.001846 max=0.002200 Jy/beam
! Clean residual mean=-0.000002 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.719272 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 247 components and 0.719272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055278Jy  sigma=1.012696
! Fit after  self-cal, rms=0.055274Jy  sigma=1.012659
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119937 Jy
! Component: 100  -  total flux cleaned = 0.000285066 Jy
! Component: 150  -  total flux cleaned = 0.000345861 Jy
! Component: 200  -  total flux cleaned = 0.000375237 Jy
! Total flux subtracted in 200 components = 0.000375237 Jy
! Clean residual min=-0.001783 max=0.002066 Jy/beam
! Clean residual mean=-0.000002 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.719647 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 263 components and 0.719647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055257Jy  sigma=1.012370
! Fit after  self-cal, rms=0.055256Jy  sigma=1.012359
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8718 mas, bmaj=2.017 mas, bpa=-0.9355 degrees
! Estimated noise=0.290504 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8718 x 2.017 at -0.9355 degrees (North through East)
! Clean map  min=-0.0051332  max=0.52758 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055256Jy  sigma=1.012359
! Fit after  self-cal, rms=0.051866Jy  sigma=0.941867
! Inverting map and beam 
! Estimated beam: bmin=0.8723 mas, bmaj=2.018 mas, bpa=-0.9096 degrees
! Estimated noise=0.29073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128426 Jy
! Component: 100  -  total flux cleaned = -0.00191108 Jy
! Component: 150  -  total flux cleaned = -0.00234509 Jy
! Component: 200  -  total flux cleaned = -0.00252575 Jy
! Total flux subtracted in 200 components = -0.00252575 Jy
! Clean residual min=-0.001541 max=0.001832 Jy/beam
! Clean residual mean=-0.000001 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.717121 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 276 components and 0.717121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051802Jy  sigma=0.940613
! Fit after  self-cal, rms=0.051799Jy  sigma=0.940585
! Inverting map 
! Added new window around map position (3.4, 6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232232 Jy
! Component: 100  -  total flux cleaned = -5.0462e-05 Jy
! Component: 150  -  total flux cleaned = -0.000132712 Jy
! Component: 200  -  total flux cleaned = -7.02203e-05 Jy
! Total flux subtracted in 200 components = -7.02203e-05 Jy
! Clean residual min=-0.001430 max=0.001602 Jy/beam
! Clean residual mean=-0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.717051 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 289 components and 0.717051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051722Jy  sigma=0.939058
! Fit after  self-cal, rms=0.051719Jy  sigma=0.939020
! Inverting map 
! Added new window around map position (-28.2, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000792892 Jy
! Component: 100  -  total flux cleaned = 0.000586979 Jy
! Component: 150  -  total flux cleaned = 0.000495806 Jy
! Component: 200  -  total flux cleaned = 0.000582706 Jy
! Total flux subtracted in 200 components = 0.000582706 Jy
! Clean residual min=-0.001351 max=0.001381 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.717633 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 307 components and 0.717634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051669Jy  sigma=0.938081
! Fit after  self-cal, rms=0.051667Jy  sigma=0.938048
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051667Jy  sigma=0.938048
! Fit after  self-cal, rms=0.051630Jy  sigma=0.937702
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6857 mas, bmaj=1.664 mas, bpa=-0.133 degrees
! Estimated noise=0.409061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.402941 Jy
! Component: 100  -  total flux cleaned = 0.538422 Jy
! Component: 150  -  total flux cleaned = 0.593759 Jy
! Component: 200  -  total flux cleaned = 0.61847 Jy
! Total flux subtracted in 200 components = 0.61847 Jy
! Clean residual min=-0.009312 max=0.011724 Jy/beam
! Clean residual mean=0.000001 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.61847 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.61847 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8719 mas, bmaj=2.018 mas, bpa=-0.9086 degrees
! Estimated noise=0.29062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185211 Jy
! Component: 100  -  total flux cleaned = 0.03036 Jy
! Component: 150  -  total flux cleaned = 0.0397081 Jy
! Component: 200  -  total flux cleaned = 0.0474529 Jy
! Total flux subtracted in 200 components = 0.0474529 Jy
! Clean residual min=-0.004810 max=0.005606 Jy/beam
! Clean residual mean=-0.000000 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.665923 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 44 components and 0.665923 Jy
! Inverting map 
! Added new window around map position (1.2, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00672195 Jy
! Component: 100  -  total flux cleaned = 0.0123872 Jy
! Component: 150  -  total flux cleaned = 0.0167158 Jy
! Component: 200  -  total flux cleaned = 0.0205258 Jy
! Total flux subtracted in 200 components = 0.0205258 Jy
! Clean residual min=-0.003571 max=0.003260 Jy/beam
! Clean residual mean=-0.000000 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.686449 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 80 components and 0.686449 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.16 mas, bmaj=3.31 mas, bpa=1.335 degrees
! Estimated noise=0.383996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00586824 Jy
! Component: 100  -  total flux cleaned = 0.0101443 Jy
! Component: 150  -  total flux cleaned = 0.0135129 Jy
! Component: 200  -  total flux cleaned = 0.0163221 Jy
! Total flux subtracted in 200 components = 0.0163221 Jy
! Clean residual min=-0.002378 max=0.002750 Jy/beam
! Clean residual mean=-0.000001 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.702771 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240416 Jy
! Component: 100  -  total flux cleaned = 0.00441308 Jy
! Component: 150  -  total flux cleaned = 0.00603026 Jy
! Component: 200  -  total flux cleaned = 0.00720835 Jy
! Total flux subtracted in 200 components = 0.00720835 Jy
! Clean residual min=-0.001914 max=0.002310 Jy/beam
! Clean residual mean=-0.000001 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.709979 Jy
! Adding 99 model components to the UV plane model.
! The established model now contains 173 components and 0.709979 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8719 mas, bmaj=2.018 mas, bpa=-0.9086 degrees
! Estimated noise=0.29062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000590977 Jy
! Component: 100  -  total flux cleaned = -0.000287644 Jy
! Component: 150  -  total flux cleaned = 0.000406539 Jy
! Component: 200  -  total flux cleaned = 0.000796327 Jy
! Total flux subtracted in 200 components = 0.000796327 Jy
! Clean residual min=-0.002413 max=0.001812 Jy/beam
! Clean residual mean=-0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.710775 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 198 components and 0.710775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052069Jy  sigma=0.946931
! Fit after  self-cal, rms=0.052015Jy  sigma=0.945956
wmodel J0925+0019_X_map.mod
! Writing 198 model components to file: J0925+0019_X_map.mod
wobs   J0925+0019_X_uvs.fits
! Writing UV FITS file: J0925+0019_X_uvs.fits
wwins  J0925+0019_X_map.win
! wwins: Wrote 13 windows to J0925+0019_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000904127 Jy
! Component: 100  -  total flux cleaned = -0.00148583 Jy
! Component: 150  -  total flux cleaned = -0.00184201 Jy
! Component: 200  -  total flux cleaned = -0.00208745 Jy
! Component: 250  -  total flux cleaned = -0.00226471 Jy
! Component: 300  -  total flux cleaned = -0.00249338 Jy
! Component: 350  -  total flux cleaned = -0.00271509 Jy
! Component: 400  -  total flux cleaned = -0.00293054 Jy
! Component: 450  -  total flux cleaned = -0.00311427 Jy
! Component: 500  -  total flux cleaned = -0.00326872 Jy
! Component: 550  -  total flux cleaned = -0.00339471 Jy
! Component: 600  -  total flux cleaned = -0.0035427 Jy
! Component: 650  -  total flux cleaned = -0.00359083 Jy
! Component: 700  -  total flux cleaned = -0.00366244 Jy
! Component: 750  -  total flux cleaned = -0.00368646 Jy
! Component: 800  -  total flux cleaned = -0.00382478 Jy
! Component: 850  -  total flux cleaned = -0.00384735 Jy
! Component: 900  -  total flux cleaned = -0.00389206 Jy
! Component: 950  -  total flux cleaned = -0.00393613 Jy
! Component: 1000  -  total flux cleaned = -0.00400126 Jy
! Component: 1050  -  total flux cleaned = -0.00404401 Jy
! Component: 1100  -  total flux cleaned = -0.00406543 Jy
! Component: 1150  -  total flux cleaned = -0.00419077 Jy
! Component: 1200  -  total flux cleaned = -0.00421138 Jy
! Component: 1250  -  total flux cleaned = -0.00423202 Jy
! Component: 1300  -  total flux cleaned = -0.00425227 Jy
! Component: 1350  -  total flux cleaned = -0.00439152 Jy
! Component: 1400  -  total flux cleaned = -0.00439142 Jy
! Component: 1450  -  total flux cleaned = -0.0044494 Jy
! Component: 1500  -  total flux cleaned = -0.00435365 Jy
! Component: 1550  -  total flux cleaned = -0.00439209 Jy
! Component: 1600  -  total flux cleaned = -0.00450419 Jy
! Component: 1650  -  total flux cleaned = -0.00455989 Jy
! Component: 1700  -  total flux cleaned = -0.0045783 Jy
! Component: 1750  -  total flux cleaned = -0.00463265 Jy
! Component: 1800  -  total flux cleaned = -0.00465046 Jy
! Component: 1850  -  total flux cleaned = -0.00459715 Jy
! Component: 1900  -  total flux cleaned = -0.0046672 Jy
! Component: 1950  -  total flux cleaned = -0.00470227 Jy
! Component: 2000  -  total flux cleaned = -0.0046332 Jy
! Component: 2050  -  total flux cleaned = -0.00466736 Jy
! Component: 2100  -  total flux cleaned = -0.0047352 Jy
! Component: 2150  -  total flux cleaned = -0.00473529 Jy
! Component: 2200  -  total flux cleaned = -0.0047684 Jy
! Component: 2250  -  total flux cleaned = -0.0047518 Jy
! Component: 2300  -  total flux cleaned = -0.00476808 Jy
! Component: 2350  -  total flux cleaned = -0.00481675 Jy
! Component: 2400  -  total flux cleaned = -0.00481661 Jy
! Component: 2450  -  total flux cleaned = -0.00478463 Jy
! Component: 2500  -  total flux cleaned = -0.00478477 Jy
! Component: 2550  -  total flux cleaned = -0.0048471 Jy
! Component: 2600  -  total flux cleaned = -0.00478515 Jy
! Component: 2650  -  total flux cleaned = -0.00478505 Jy
! Component: 2700  -  total flux cleaned = -0.0047392 Jy
! Component: 2750  -  total flux cleaned = -0.00476964 Jy
! Component: 2800  -  total flux cleaned = -0.00473968 Jy
! Component: 2850  -  total flux cleaned = -0.00478443 Jy
! Component: 2900  -  total flux cleaned = -0.00475498 Jy
! Component: 2950  -  total flux cleaned = -0.00474024 Jy
! Component: 3000  -  total flux cleaned = -0.00478371 Jy
! Component: 3050  -  total flux cleaned = -0.00476915 Jy
! Component: 3100  -  total flux cleaned = -0.00468297 Jy
! Component: 3150  -  total flux cleaned = -0.0046971 Jy
! Component: 3200  -  total flux cleaned = -0.00465465 Jy
! Component: 3250  -  total flux cleaned = -0.00461234 Jy
! Component: 3300  -  total flux cleaned = -0.00455653 Jy
! Component: 3350  -  total flux cleaned = -0.00458434 Jy
! Component: 3400  -  total flux cleaned = -0.00451552 Jy
! Component: 3450  -  total flux cleaned = -0.00452923 Jy
! Component: 3500  -  total flux cleaned = -0.0045158 Jy
! Component: 3550  -  total flux cleaned = -0.0045158 Jy
! Component: 3600  -  total flux cleaned = -0.00440847 Jy
! Component: 3650  -  total flux cleaned = -0.00442179 Jy
! Component: 3700  -  total flux cleaned = -0.00435534 Jy
! Component: 3750  -  total flux cleaned = -0.00436868 Jy
! Component: 3800  -  total flux cleaned = -0.00432949 Jy
! Component: 3850  -  total flux cleaned = -0.00430347 Jy
! Component: 3900  -  total flux cleaned = -0.00440696 Jy
! Component: 3950  -  total flux cleaned = -0.00432972 Jy
! Component: 4000  -  total flux cleaned = -0.00430426 Jy
! Component: 4050  -  total flux cleaned = -0.00427879 Jy
! Total flux subtracted in 4096 components = -0.00427893 Jy
! Clean residual min=-0.000705 max=0.000636 Jy/beam
! Clean residual mean=-0.000000 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.706496 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 500 components and 0.706496 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0925+0019_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8719 x 2.018 at -0.9086 degrees (North through East)
! Clean map  min=-0.0017039  max=0.52902 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0925+0019_X_map.fits
wmodel /vlbi/uf001/uva//J0925+0019_X_map.mod
! Writing 500 model components to file: /vlbi/uf001/uva//J0925+0019_X_map.mod
wobs   /vlbi/uf001/uva//J0925+0019_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0925+0019_X_uvs.fits
wwins  /vlbi/uf001/uva//J0925+0019_X_map.win
! wwins: Wrote 14 windows to /vlbi/uf001/uva//J0925+0019_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.529018 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00021589 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.122429 0.122429 0.244858 0.489715 0.979431 1.95886 3.91772 7.83544 15.6709 31.3418 62.6836
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.529 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2450.4 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0925+0019_X_dfm.log closed on Mon Jan 14 00:26:05 2019