! Started logfile: /vlbi/uf001/uva//J0918-1205_S_b_dfm.log on Mon Jan 14 00:22:35 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0918-1205_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0918-1205_S_b_uva.fits ! AN table 1: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.983374 visibilities/baseline/integration-bin. ! Found source: J0918-1205 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4791 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0918-1205_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017913Jy sigma=19.032875 ! Fit after self-cal, rms=0.891543Jy sigma=16.672042 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=13.9 mas, bpa=-20.87 degrees ! Estimated noise=0.724997 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0831655 Jy ! Component: 100 - total flux cleaned = 0.118659 Jy ! Total flux subtracted in 100 components = 0.118659 Jy ! Clean residual min=-0.011099 max=0.019165 Jy/beam ! Clean residual mean=-0.000236 rms=0.004332 Jy/beam ! Combined flux in latest and established models = 0.118659 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.118659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093041Jy sigma=1.619846 ! Fit after self-cal, rms=0.092416Jy sigma=1.609976 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=13.86 mas, bpa=-20.4 degrees ! Estimated noise=0.569635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300466 Jy ! Component: 100 - total flux cleaned = 0.0504923 Jy ! Component: 150 - total flux cleaned = 0.0660046 Jy ! Component: 200 - total flux cleaned = 0.0782066 Jy ! Total flux subtracted in 200 components = 0.0782066 Jy ! Clean residual min=-0.008163 max=0.010816 Jy/beam ! Clean residual mean=-0.000120 rms=0.002835 Jy/beam ! Combined flux in latest and established models = 0.196866 Jy ! Performing phase self-cal ! Adding 103 model components to the UV plane model. ! The established model now contains 136 components and 0.196866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079686Jy sigma=1.339640 ! Fit after self-cal, rms=0.079530Jy sigma=1.336984 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.157 x 13.86 at -20.4 degrees (North through East) ! Clean map min=-0.0078015 max=0.10632 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.79 HN 1.12 KP 0.95 ! LA 0.91 MK 1.14 NL 1.05 OV 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.27 FD 0.81 HN 1.09 KP 0.92 ! LA 0.98 MK 1.06 NL 1.01 OV 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.83 FD 0.86 HN 1.03 KP 1.00 ! LA 0.92 MK 1.14 NL 1.03 OV 0.87 ! ! ! Fit before self-cal, rms=0.079530Jy sigma=1.336984 ! Fit after self-cal, rms=0.107760Jy sigma=1.228431 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=15.4 mas, bpa=-20.24 degrees ! Estimated noise=0.583178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164091 Jy ! Component: 100 - total flux cleaned = 0.00153185 Jy ! Component: 150 - total flux cleaned = 0.00119616 Jy ! Component: 200 - total flux cleaned = 0.000712945 Jy ! Total flux subtracted in 200 components = 0.000712945 Jy ! Clean residual min=-0.004155 max=0.005129 Jy/beam ! Clean residual mean=0.000012 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 0.197579 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 152 components and 0.197579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107390Jy sigma=1.222884 ! Fit after self-cal, rms=0.107760Jy sigma=1.221322 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107760Jy sigma=1.221322 ! Fit after self-cal, rms=0.099155Jy sigma=1.208220 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=15.59 mas, bpa=-20.21 degrees ! Estimated noise=0.577881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032954 Jy ! Component: 100 - total flux cleaned = 0.000216914 Jy ! Component: 150 - total flux cleaned = -7.60809e-05 Jy ! Component: 200 - total flux cleaned = -0.000269569 Jy ! Total flux subtracted in 200 components = -0.000269569 Jy ! Clean residual min=-0.003431 max=0.003401 Jy/beam ! Clean residual mean=0.000011 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.197309 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 169 components and 0.197309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099079Jy sigma=1.206110 ! Fit after self-cal, rms=0.099013Jy sigma=1.205869 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.65519e-05 Jy ! Component: 100 - total flux cleaned = -0.000167044 Jy ! Component: 150 - total flux cleaned = -0.000300824 Jy ! Component: 200 - total flux cleaned = -0.000449001 Jy ! Total flux subtracted in 200 components = -0.000449001 Jy ! Clean residual min=-0.003337 max=0.003381 Jy/beam ! Clean residual mean=0.000011 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.19686 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 180 components and 0.19686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098999Jy sigma=1.205454 ! Fit after self-cal, rms=0.098989Jy sigma=1.205443 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.098989Jy sigma=1.205443 ! Fit after self-cal, rms=0.100712Jy sigma=1.204777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=15.71 mas, bpa=-20.14 degrees ! Estimated noise=0.576826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00046024 Jy ! Component: 100 - total flux cleaned = -0.000613674 Jy ! Component: 150 - total flux cleaned = -0.000743718 Jy ! Component: 200 - total flux cleaned = -0.000855262 Jy ! Total flux subtracted in 200 components = -0.000855262 Jy ! Clean residual min=-0.003050 max=0.003065 Jy/beam ! Clean residual mean=0.000012 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.196005 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 192 components and 0.196005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100676Jy sigma=1.203966 ! Fit after self-cal, rms=0.100675Jy sigma=1.203949 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.16348e-05 Jy ! Component: 100 - total flux cleaned = -0.000201681 Jy ! Component: 150 - total flux cleaned = -0.000312864 Jy ! Component: 200 - total flux cleaned = -0.000416481 Jy ! Total flux subtracted in 200 components = -0.000416481 Jy ! Clean residual min=-0.002999 max=0.003017 Jy/beam ! Clean residual mean=0.000011 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.195588 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 193 components and 0.195588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100665Jy sigma=1.203690 ! Fit after self-cal, rms=0.100663Jy sigma=1.203684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100663Jy sigma=1.203684 ! Fit after self-cal, rms=0.102271Jy sigma=1.203408 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.862 mas, bmaj=18.02 mas, bpa=-13.95 degrees ! Estimated noise=0.711888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014179 Jy ! Component: 100 - total flux cleaned = -0.00152885 Jy ! Component: 150 - total flux cleaned = -0.00158911 Jy ! Component: 200 - total flux cleaned = -0.00166842 Jy ! Total flux subtracted in 200 components = -0.00166842 Jy ! Clean residual min=-0.003397 max=0.003768 Jy/beam ! Clean residual mean=0.000021 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.19392 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 204 components and 0.19392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102260Jy sigma=1.203014 ! Fit after self-cal, rms=0.102260Jy sigma=1.202954 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.27148e-05 Jy ! Component: 100 - total flux cleaned = -0.000126002 Jy ! Component: 150 - total flux cleaned = -0.000182712 Jy ! Component: 200 - total flux cleaned = -0.000234177 Jy ! Total flux subtracted in 200 components = -0.000234177 Jy ! Clean residual min=-0.003304 max=0.003716 Jy/beam ! Clean residual mean=0.000021 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.193686 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 207 components and 0.193686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102260Jy sigma=1.202835 ! Fit after self-cal, rms=0.102264Jy sigma=1.202824 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=15.8 mas, bpa=-20.08 degrees ! Estimated noise=0.576818 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 15.8 at -20.08 degrees (North through East) ! Clean map min=-0.0027007 max=0.10511 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=15.57 mas, bpa=-20.43 degrees ! Estimated noise=0.747761 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0846816 Jy ! Component: 100 - total flux cleaned = 0.120277 Jy ! Component: 150 - total flux cleaned = 0.140716 Jy ! Component: 200 - total flux cleaned = 0.153642 Jy ! Total flux subtracted in 200 components = 0.153642 Jy ! Clean residual min=-0.005389 max=0.007002 Jy/beam ! Clean residual mean=-0.000090 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 0.153642 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.153642 Jy ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=15.8 mas, bpa=-20.08 degrees ! Estimated noise=0.576818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114015 Jy ! Component: 100 - total flux cleaned = 0.0191403 Jy ! Component: 150 - total flux cleaned = 0.0246313 Jy ! Component: 200 - total flux cleaned = 0.0287042 Jy ! Total flux subtracted in 200 components = 0.0287042 Jy ! Clean residual min=-0.003302 max=0.003814 Jy/beam ! Clean residual mean=-0.000021 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.182346 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 111 components and 0.182346 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.862 mas, bmaj=18.02 mas, bpa=-13.95 degrees ! Estimated noise=0.711888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476596 Jy ! Component: 100 - total flux cleaned = 0.00758162 Jy ! Component: 150 - total flux cleaned = 0.00940686 Jy ! Component: 200 - total flux cleaned = 0.0106225 Jy ! Total flux subtracted in 200 components = 0.0106225 Jy ! Clean residual min=-0.003226 max=0.003599 Jy/beam ! Clean residual mean=0.000014 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.192969 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621951 Jy ! Component: 100 - total flux cleaned = 0.000851082 Jy ! Component: 150 - total flux cleaned = 0.0010576 Jy ! Component: 200 - total flux cleaned = 0.00124425 Jy ! Total flux subtracted in 200 components = 0.00124425 Jy ! Clean residual min=-0.003076 max=0.003617 Jy/beam ! Clean residual mean=0.000019 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.194213 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 156 components and 0.194213 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=15.8 mas, bpa=-20.08 degrees ! Estimated noise=0.576818 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224992 Jy ! Component: 100 - total flux cleaned = -6.56702e-05 Jy ! Component: 150 - total flux cleaned = 8.09345e-05 Jy ! Component: 200 - total flux cleaned = 0.000246633 Jy ! Total flux subtracted in 200 components = 0.000246633 Jy ! Clean residual min=-0.002560 max=0.002967 Jy/beam ! Clean residual mean=0.000009 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.19446 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 172 components and 0.19446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102327Jy sigma=1.203724 ! Fit after self-cal, rms=0.102286Jy sigma=1.203401 wmodel J0918-1205_S_b_map.mod ! Writing 172 model components to file: J0918-1205_S_b_map.mod wobs J0918-1205_S_b_uvs.fits ! Writing UV FITS file: J0918-1205_S_b_uvs.fits wwins J0918-1205_S_b_map.win ! wwins: Wrote 1 windows to J0918-1205_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136563 Jy ! Component: 100 - total flux cleaned = 0.00215647 Jy ! Component: 150 - total flux cleaned = 0.00252257 Jy ! Component: 200 - total flux cleaned = 0.00291495 Jy ! Component: 250 - total flux cleaned = 0.00312423 Jy ! Component: 300 - total flux cleaned = 0.00324446 Jy ! Component: 350 - total flux cleaned = 0.0033593 Jy ! Component: 400 - total flux cleaned = 0.00354616 Jy ! Component: 450 - total flux cleaned = 0.00372765 Jy ! Component: 500 - total flux cleaned = 0.00383291 Jy ! Component: 550 - total flux cleaned = 0.00393477 Jy ! Component: 600 - total flux cleaned = 0.0040007 Jy ! Component: 650 - total flux cleaned = 0.00406593 Jy ! Component: 700 - total flux cleaned = 0.0042572 Jy ! Component: 750 - total flux cleaned = 0.00444294 Jy ! Component: 800 - total flux cleaned = 0.00459387 Jy ! Component: 850 - total flux cleaned = 0.00477179 Jy ! Component: 900 - total flux cleaned = 0.00491702 Jy ! Component: 950 - total flux cleaned = 0.00514444 Jy ! Component: 1000 - total flux cleaned = 0.00519953 Jy ! Component: 1050 - total flux cleaned = 0.00533639 Jy ! Component: 1100 - total flux cleaned = 0.00549717 Jy ! Component: 1150 - total flux cleaned = 0.00555007 Jy ! Component: 1200 - total flux cleaned = 0.00570607 Jy ! Component: 1250 - total flux cleaned = 0.00583368 Jy ! Component: 1300 - total flux cleaned = 0.00590878 Jy ! Component: 1350 - total flux cleaned = 0.00595777 Jy ! Component: 1400 - total flux cleaned = 0.0059577 Jy ! Component: 1450 - total flux cleaned = 0.00600551 Jy ! Component: 1500 - total flux cleaned = 0.00602918 Jy ! Component: 1550 - total flux cleaned = 0.00612118 Jy ! Component: 1600 - total flux cleaned = 0.00614392 Jy ! Component: 1650 - total flux cleaned = 0.00616601 Jy ! Component: 1700 - total flux cleaned = 0.00623188 Jy ! Component: 1750 - total flux cleaned = 0.00631881 Jy ! Component: 1800 - total flux cleaned = 0.00638294 Jy ! Component: 1850 - total flux cleaned = 0.00640385 Jy ! Component: 1900 - total flux cleaned = 0.0063834 Jy ! Component: 1950 - total flux cleaned = 0.00644541 Jy ! Component: 2000 - total flux cleaned = 0.00646578 Jy ! Component: 2050 - total flux cleaned = 0.00652567 Jy ! Component: 2100 - total flux cleaned = 0.00650602 Jy ! Component: 2150 - total flux cleaned = 0.00658438 Jy ! Component: 2200 - total flux cleaned = 0.00662291 Jy ! Component: 2250 - total flux cleaned = 0.00673741 Jy ! Component: 2300 - total flux cleaned = 0.0068504 Jy ! Component: 2350 - total flux cleaned = 0.00692504 Jy ! Component: 2400 - total flux cleaned = 0.00705423 Jy ! Component: 2450 - total flux cleaned = 0.00714533 Jy ! Component: 2500 - total flux cleaned = 0.0072175 Jy ! Component: 2550 - total flux cleaned = 0.00725319 Jy ! Component: 2600 - total flux cleaned = 0.00730623 Jy ! Component: 2650 - total flux cleaned = 0.00734144 Jy ! Component: 2700 - total flux cleaned = 0.00746306 Jy ! Component: 2750 - total flux cleaned = 0.00749742 Jy ! Component: 2800 - total flux cleaned = 0.00754858 Jy ! Component: 2850 - total flux cleaned = 0.00759934 Jy ! Component: 2900 - total flux cleaned = 0.0075993 Jy ! Component: 2950 - total flux cleaned = 0.00758285 Jy ! Component: 3000 - total flux cleaned = 0.00766598 Jy ! Component: 3050 - total flux cleaned = 0.00773181 Jy ! Component: 3100 - total flux cleaned = 0.00776465 Jy ! Component: 3150 - total flux cleaned = 0.00781326 Jy ! Component: 3200 - total flux cleaned = 0.00787775 Jy ! Component: 3250 - total flux cleaned = 0.00792571 Jy ! Component: 3300 - total flux cleaned = 0.00790978 Jy ! Component: 3350 - total flux cleaned = 0.00795719 Jy ! Component: 3400 - total flux cleaned = 0.00795719 Jy ! Component: 3450 - total flux cleaned = 0.00797279 Jy ! Component: 3500 - total flux cleaned = 0.00795722 Jy ! Component: 3550 - total flux cleaned = 0.00803458 Jy ! Component: 3600 - total flux cleaned = 0.00804998 Jy ! Component: 3650 - total flux cleaned = 0.00804997 Jy ! Component: 3700 - total flux cleaned = 0.00806523 Jy ! Component: 3750 - total flux cleaned = 0.00809556 Jy ! Component: 3800 - total flux cleaned = 0.00812566 Jy ! Component: 3850 - total flux cleaned = 0.00814062 Jy ! Component: 3900 - total flux cleaned = 0.00820041 Jy ! Component: 3950 - total flux cleaned = 0.0082153 Jy ! Component: 4000 - total flux cleaned = 0.00823011 Jy ! Component: 4050 - total flux cleaned = 0.00824495 Jy ! Total flux subtracted in 4096 components = 0.00827453 Jy ! Clean residual min=-0.000826 max=0.001033 Jy/beam ! Clean residual mean=-0.000002 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.202734 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 440 components and 0.202734 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0918-1205_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 15.8 at -20.08 degrees (North through East) ! Clean map min=-0.0022424 max=0.10501 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0918-1205_S_b_map.fits wmodel /vlbi/uf001/uva//J0918-1205_S_b_map.mod ! Writing 440 model components to file: /vlbi/uf001/uva//J0918-1205_S_b_map.mod wobs /vlbi/uf001/uva//J0918-1205_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0918-1205_S_b_uvs.fits wwins /vlbi/uf001/uva//J0918-1205_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0918-1205_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.105007 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025957 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.741579 0.741579 1.48316 2.96632 5.93264 11.8653 23.7305 47.4611 94.9222 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.105 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 404.541 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0918-1205_S_b_dfm.log closed on Mon Jan 14 00:22:40 2019