! Started logfile: /vlbi/uf001/uva//J0918-1205_S_a_dfm.log on Mon Jan 14 00:22:30 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0918-1205_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0918-1205_S_a_uva.fits
! AN table 1: 87 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.835888 visibilities/baseline/integration-bin.
! Found source: J0918-1205
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7854 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0918-1205_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014203Jy  sigma=17.155132
! Fit after  self-cal, rms=0.855791Jy  sigma=14.512640
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.007 mas, bmaj=6.601 mas, bpa=6.928 degrees
! Estimated noise=0.659683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113553 Jy
! Component: 100  -  total flux cleaned = 0.152892 Jy
! Total flux subtracted in 100 components = 0.152892 Jy
! Clean residual min=-0.006320 max=0.016974 Jy/beam
! Clean residual mean=0.000006 rms=0.002152 Jy/beam
! Combined flux in latest and established models = 0.152892 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.152892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078930Jy  sigma=1.316326
! Fit after  self-cal, rms=0.078666Jy  sigma=1.312567
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188208 Jy
! Component: 100  -  total flux cleaned = 0.0286591 Jy
! Total flux subtracted in 100 components = 0.0286591 Jy
! Clean residual min=-0.004784 max=0.008420 Jy/beam
! Clean residual mean=-0.000004 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 0.181551 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.181551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073975Jy  sigma=1.232082
! Fit after  self-cal, rms=0.073935Jy  sigma=1.231426
! Inverting map 
! Added new window around map position (-5, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00791377 Jy
! Component: 100  -  total flux cleaned = 0.0123427 Jy
! Total flux subtracted in 100 components = 0.0123427 Jy
! Clean residual min=-0.004423 max=0.007449 Jy/beam
! Clean residual mean=-0.000005 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.193894 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.193894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073136Jy  sigma=1.217041
! Fit after  self-cal, rms=0.073053Jy  sigma=1.215793
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=7.695 mas, bpa=6.743 degrees
! Estimated noise=0.485124 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693112 Jy
! Component: 100  -  total flux cleaned = 0.0110491 Jy
! Component: 150  -  total flux cleaned = 0.0133215 Jy
! Component: 200  -  total flux cleaned = 0.0151078 Jy
! Total flux subtracted in 200 components = 0.0151078 Jy
! Clean residual min=-0.004086 max=0.003975 Jy/beam
! Clean residual mean=-0.000001 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.209001 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 53 components and 0.209001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072307Jy  sigma=1.202285
! Fit after  self-cal, rms=0.072275Jy  sigma=1.201656
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.518 x 7.695 at 6.743 degrees (North through East)
! Clean map  min=-0.0039059  max=0.13002 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.03     KP        1.01     
!   LA        0.97     MK        1.05     NL        1.05     OV        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.03     KP        1.00     
!   LA        0.97     MK        1.00     NL        1.11     OV        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        0.97     KP        1.00     
!   LA        0.95     MK        1.02     NL        1.09     OV        0.96     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.072275Jy  sigma=1.201656
! Fit after  self-cal, rms=0.072256Jy  sigma=1.192340
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.522 mas, bmaj=7.752 mas, bpa=7.067 degrees
! Estimated noise=0.485576 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00165321 Jy
! Component: 100  -  total flux cleaned = -0.00235384 Jy
! Component: 150  -  total flux cleaned = -0.00263211 Jy
! Component: 200  -  total flux cleaned = -0.00283284 Jy
! Total flux subtracted in 200 components = -0.00283284 Jy
! Clean residual min=-0.002927 max=0.003069 Jy/beam
! Clean residual mean=0.000001 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.206169 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.206169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072186Jy  sigma=1.191335
! Fit after  self-cal, rms=0.072209Jy  sigma=1.191170
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072209Jy  sigma=1.191170
! Fit after  self-cal, rms=0.071979Jy  sigma=1.179628
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.522 mas, bmaj=7.75 mas, bpa=6.944 degrees
! Estimated noise=0.485426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271628 Jy
! Component: 100  -  total flux cleaned = -0.000483447 Jy
! Component: 150  -  total flux cleaned = -0.000574925 Jy
! Component: 200  -  total flux cleaned = -0.000658976 Jy
! Total flux subtracted in 200 components = -0.000658976 Jy
! Clean residual min=-0.002123 max=0.002078 Jy/beam
! Clean residual mean=-0.000003 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.20551 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 0.20551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071949Jy  sigma=1.179121
! Fit after  self-cal, rms=0.071963Jy  sigma=1.179017
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165186 Jy
! Component: 100  -  total flux cleaned = -0.000188799 Jy
! Component: 150  -  total flux cleaned = -0.000232279 Jy
! Component: 200  -  total flux cleaned = -0.000252868 Jy
! Total flux subtracted in 200 components = -0.000252868 Jy
! Clean residual min=-0.002083 max=0.002038 Jy/beam
! Clean residual mean=-0.000003 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.205257 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.205257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071950Jy  sigma=1.178816
! Fit after  self-cal, rms=0.071950Jy  sigma=1.178811
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071950Jy  sigma=1.178811
! Fit after  self-cal, rms=0.072145Jy  sigma=1.177436
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.524 mas, bmaj=7.753 mas, bpa=6.944 degrees
! Estimated noise=0.484718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011513 Jy
! Component: 100  -  total flux cleaned = 9.07995e-05 Jy
! Component: 150  -  total flux cleaned = 4.54397e-05 Jy
! Component: 200  -  total flux cleaned = 2.41913e-05 Jy
! Total flux subtracted in 200 components = 2.41913e-05 Jy
! Clean residual min=-0.001964 max=0.001878 Jy/beam
! Clean residual mean=-0.000003 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.205281 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 112 components and 0.205281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072130Jy  sigma=1.177210
! Fit after  self-cal, rms=0.072142Jy  sigma=1.177192
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.29729e-07 Jy
! Component: 100  -  total flux cleaned = -1.80133e-05 Jy
! Component: 150  -  total flux cleaned = -8.91467e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105979 Jy
! Total flux subtracted in 200 components = -0.000105979 Jy
! Clean residual min=-0.001940 max=0.001867 Jy/beam
! Clean residual mean=-0.000003 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.205175 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 117 components and 0.205175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072133Jy  sigma=1.177070
! Fit after  self-cal, rms=0.072132Jy  sigma=1.177068
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072132Jy  sigma=1.177068
! Fit after  self-cal, rms=0.072222Jy  sigma=1.177042
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.998 mas, bmaj=13.14 mas, bpa=6.881 degrees
! Estimated noise=0.604789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167635 Jy
! Component: 100  -  total flux cleaned = 0.000186802 Jy
! Component: 150  -  total flux cleaned = 0.000220883 Jy
! Component: 200  -  total flux cleaned = 0.000265347 Jy
! Total flux subtracted in 200 components = 0.000265347 Jy
! Clean residual min=-0.002276 max=0.002475 Jy/beam
! Clean residual mean=-0.000005 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.20544 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 130 components and 0.20544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072218Jy  sigma=1.177045
! Fit after  self-cal, rms=0.072219Jy  sigma=1.177031
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.70127e-05 Jy
! Component: 100  -  total flux cleaned = 0.000124594 Jy
! Component: 150  -  total flux cleaned = 0.000163257 Jy
! Component: 200  -  total flux cleaned = 0.000198506 Jy
! Total flux subtracted in 200 components = 0.000198506 Jy
! Clean residual min=-0.002313 max=0.002454 Jy/beam
! Clean residual mean=-0.000005 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.205639 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 138 components and 0.205639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072218Jy  sigma=1.177046
! Fit after  self-cal, rms=0.072217Jy  sigma=1.177040
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.526 mas, bmaj=7.759 mas, bpa=6.994 degrees
! Estimated noise=0.484894 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.526 x 7.759 at 6.994 degrees (North through East)
! Clean map  min=-0.0018998  max=0.12951 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.014 mas, bmaj=6.651 mas, bpa=7.275 degrees
! Estimated noise=0.659741 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113238 Jy
! Component: 100  -  total flux cleaned = 0.152193 Jy
! Component: 150  -  total flux cleaned = 0.170502 Jy
! Component: 200  -  total flux cleaned = 0.180438 Jy
! Total flux subtracted in 200 components = 0.180438 Jy
! Clean residual min=-0.003283 max=0.005029 Jy/beam
! Clean residual mean=-0.000003 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.180438 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.180438 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.526 mas, bmaj=7.759 mas, bpa=6.994 degrees
! Estimated noise=0.484894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00722217 Jy
! Component: 100  -  total flux cleaned = 0.0119227 Jy
! Component: 150  -  total flux cleaned = 0.0151653 Jy
! Component: 200  -  total flux cleaned = 0.0172314 Jy
! Total flux subtracted in 200 components = 0.0172314 Jy
! Clean residual min=-0.002322 max=0.002223 Jy/beam
! Clean residual mean=-0.000004 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.19767 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 68 components and 0.19767 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.998 mas, bmaj=13.14 mas, bpa=6.881 degrees
! Estimated noise=0.604789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275711 Jy
! Component: 100  -  total flux cleaned = 0.00439069 Jy
! Component: 150  -  total flux cleaned = 0.00530659 Jy
! Component: 200  -  total flux cleaned = 0.0057865 Jy
! Total flux subtracted in 200 components = 0.0057865 Jy
! Clean residual min=-0.002587 max=0.002576 Jy/beam
! Clean residual mean=-0.000006 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.203456 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232288 Jy
! Component: 100  -  total flux cleaned = 0.0004341 Jy
! Component: 150  -  total flux cleaned = 0.000632887 Jy
! Component: 200  -  total flux cleaned = 0.000804888 Jy
! Total flux subtracted in 200 components = 0.000804888 Jy
! Clean residual min=-0.002493 max=0.002513 Jy/beam
! Clean residual mean=-0.000006 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.204261 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 122 components and 0.204261 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.526 mas, bmaj=7.759 mas, bpa=6.994 degrees
! Estimated noise=0.484894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.18213e-05 Jy
! Component: 100  -  total flux cleaned = -5.87503e-05 Jy
! Component: 150  -  total flux cleaned = -2.82189e-05 Jy
! Component: 200  -  total flux cleaned = -5.7267e-05 Jy
! Total flux subtracted in 200 components = -5.7267e-05 Jy
! Clean residual min=-0.001975 max=0.001876 Jy/beam
! Clean residual mean=-0.000003 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.204204 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 138 components and 0.204204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072244Jy  sigma=1.177546
! Fit after  self-cal, rms=0.072242Jy  sigma=1.177455
wmodel J0918-1205_S_a_map.mod
! Writing 138 model components to file: J0918-1205_S_a_map.mod
wobs   J0918-1205_S_a_uvs.fits
! Writing UV FITS file: J0918-1205_S_a_uvs.fits
wwins  J0918-1205_S_a_map.win
! wwins: Wrote 3 windows to J0918-1205_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000547698 Jy
! Component: 100  -  total flux cleaned = -0.000980088 Jy
! Component: 150  -  total flux cleaned = -0.00116788 Jy
! Component: 200  -  total flux cleaned = -0.00122713 Jy
! Component: 250  -  total flux cleaned = -0.0012269 Jy
! Component: 300  -  total flux cleaned = -0.00131067 Jy
! Component: 350  -  total flux cleaned = -0.00141815 Jy
! Component: 400  -  total flux cleaned = -0.00152228 Jy
! Component: 450  -  total flux cleaned = -0.00157296 Jy
! Component: 500  -  total flux cleaned = -0.00154776 Jy
! Component: 550  -  total flux cleaned = -0.00162052 Jy
! Component: 600  -  total flux cleaned = -0.00157214 Jy
! Component: 650  -  total flux cleaned = -0.00157236 Jy
! Component: 700  -  total flux cleaned = -0.00152679 Jy
! Component: 750  -  total flux cleaned = -0.00152739 Jy
! Component: 800  -  total flux cleaned = -0.00152787 Jy
! Component: 850  -  total flux cleaned = -0.00155007 Jy
! Component: 900  -  total flux cleaned = -0.00161424 Jy
! Component: 950  -  total flux cleaned = -0.00163552 Jy
! Component: 1000  -  total flux cleaned = -0.00173911 Jy
! Component: 1050  -  total flux cleaned = -0.00175912 Jy
! Component: 1100  -  total flux cleaned = -0.00181951 Jy
! Component: 1150  -  total flux cleaned = -0.00181957 Jy
! Component: 1200  -  total flux cleaned = -0.00193634 Jy
! Component: 1250  -  total flux cleaned = -0.00193626 Jy
! Component: 1300  -  total flux cleaned = -0.00203093 Jy
! Component: 1350  -  total flux cleaned = -0.00203125 Jy
! Component: 1400  -  total flux cleaned = -0.00206811 Jy
! Component: 1450  -  total flux cleaned = -0.00206835 Jy
! Component: 1500  -  total flux cleaned = -0.0021224 Jy
! Component: 1550  -  total flux cleaned = -0.00213996 Jy
! Component: 1600  -  total flux cleaned = -0.00219222 Jy
! Component: 1650  -  total flux cleaned = -0.0021231 Jy
! Component: 1700  -  total flux cleaned = -0.00214024 Jy
! Component: 1750  -  total flux cleaned = -0.00212345 Jy
! Component: 1800  -  total flux cleaned = -0.00219042 Jy
! Component: 1850  -  total flux cleaned = -0.00210813 Jy
! Component: 1900  -  total flux cleaned = -0.00217324 Jy
! Component: 1950  -  total flux cleaned = -0.0021411 Jy
! Component: 2000  -  total flux cleaned = -0.00215683 Jy
! Component: 2050  -  total flux cleaned = -0.00214111 Jy
! Component: 2100  -  total flux cleaned = -0.00218766 Jy
! Component: 2150  -  total flux cleaned = -0.00212576 Jy
! Component: 2200  -  total flux cleaned = -0.00218684 Jy
! Component: 2250  -  total flux cleaned = -0.00214158 Jy
! Component: 2300  -  total flux cleaned = -0.00217144 Jy
! Component: 2350  -  total flux cleaned = -0.00218621 Jy
! Component: 2400  -  total flux cleaned = -0.00218617 Jy
! Component: 2450  -  total flux cleaned = -0.00220072 Jy
! Component: 2500  -  total flux cleaned = -0.00221524 Jy
! Component: 2550  -  total flux cleaned = -0.00227198 Jy
! Component: 2600  -  total flux cleaned = -0.0022859 Jy
! Component: 2650  -  total flux cleaned = -0.00229991 Jy
! Component: 2700  -  total flux cleaned = -0.00231395 Jy
! Component: 2750  -  total flux cleaned = -0.00239598 Jy
! Component: 2800  -  total flux cleaned = -0.00239582 Jy
! Component: 2850  -  total flux cleaned = -0.002436 Jy
! Component: 2900  -  total flux cleaned = -0.00248903 Jy
! Component: 2950  -  total flux cleaned = -0.00250229 Jy
! Component: 3000  -  total flux cleaned = -0.00250235 Jy
! Component: 3050  -  total flux cleaned = -0.00255435 Jy
! Component: 3100  -  total flux cleaned = -0.00255439 Jy
! Component: 3150  -  total flux cleaned = -0.00260562 Jy
! Component: 3200  -  total flux cleaned = -0.00258029 Jy
! Component: 3250  -  total flux cleaned = -0.0026557 Jy
! Component: 3300  -  total flux cleaned = -0.00266796 Jy
! Component: 3350  -  total flux cleaned = -0.00271742 Jy
! Component: 3400  -  total flux cleaned = -0.00269285 Jy
! Component: 3450  -  total flux cleaned = -0.00275378 Jy
! Component: 3500  -  total flux cleaned = -0.00277801 Jy
! Component: 3550  -  total flux cleaned = -0.002802 Jy
! Component: 3600  -  total flux cleaned = -0.00281386 Jy
! Component: 3650  -  total flux cleaned = -0.00283743 Jy
! Component: 3700  -  total flux cleaned = -0.00290783 Jy
! Component: 3750  -  total flux cleaned = -0.00289613 Jy
! Component: 3800  -  total flux cleaned = -0.00287287 Jy
! Component: 3850  -  total flux cleaned = -0.00289578 Jy
! Component: 3900  -  total flux cleaned = -0.00290721 Jy
! Component: 3950  -  total flux cleaned = -0.00292993 Jy
! Component: 4000  -  total flux cleaned = -0.00292996 Jy
! Component: 4050  -  total flux cleaned = -0.00294121 Jy
! Total flux subtracted in 4096 components = -0.00296362 Jy
! Clean residual min=-0.000653 max=0.000657 Jy/beam
! Clean residual mean=-0.000000 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.20124 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 448 components and 0.20124 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0918-1205_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.526 x 7.759 at 6.994 degrees (North through East)
! Clean map  min=-0.0013046  max=0.1306 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0918-1205_S_a_map.fits
wmodel /vlbi/uf001/uva//J0918-1205_S_a_map.mod
! Writing 448 model components to file: /vlbi/uf001/uva//J0918-1205_S_a_map.mod
wobs   /vlbi/uf001/uva//J0918-1205_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0918-1205_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J0918-1205_S_a_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0918-1205_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.130603 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000204107 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.468841 0.468841 0.937682 1.87536 3.75073 7.50145 15.0029 30.0058 60.0116
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.13 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  639.875 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0918-1205_S_a_dfm.log closed on Mon Jan 14 00:22:35 2019