! Started logfile: /vlbi/uf001/uva//J0916+0242_X_dfm.log on Mon Jan 14 00:21:36 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0916+0242_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0916+0242_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.97037 visibilities/baseline/integration-bin.
! Found source: J0916+0242
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29868 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0916+0242_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042350Jy  sigma=23.196618
! Fit after  self-cal, rms=0.721735Jy  sigma=15.997590
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7066 mas, bmaj=1.665 mas, bpa=-1.367 degrees
! Estimated noise=0.315883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.222786 Jy
! Component: 100  -  total flux cleaned = 0.271368 Jy
! Total flux subtracted in 100 components = 0.271368 Jy
! Clean residual min=-0.011098 max=0.019579 Jy/beam
! Clean residual mean=0.000004 rms=0.002556 Jy/beam
! Combined flux in latest and established models = 0.271368 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.271368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084442Jy  sigma=1.739262
! Fit after  self-cal, rms=0.084438Jy  sigma=1.739196
! Inverting map 
! Added new window around map position (0.8, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171201 Jy
! Component: 100  -  total flux cleaned = 0.0225243 Jy
! Total flux subtracted in 100 components = 0.0225243 Jy
! Clean residual min=-0.011627 max=0.015557 Jy/beam
! Clean residual mean=0.000004 rms=0.002345 Jy/beam
! Combined flux in latest and established models = 0.293893 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.293893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081928Jy  sigma=1.683062
! Fit after  self-cal, rms=0.081637Jy  sigma=1.675990
! Inverting map 
! Added new window around map position (-1.2, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125673 Jy
! Component: 100  -  total flux cleaned = 0.01623 Jy
! Total flux subtracted in 100 components = 0.01623 Jy
! Clean residual min=-0.011459 max=0.011894 Jy/beam
! Clean residual mean=0.000004 rms=0.002147 Jy/beam
! Combined flux in latest and established models = 0.310123 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 21 components and 0.310123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080040Jy  sigma=1.634267
! Fit after  self-cal, rms=0.079865Jy  sigma=1.630371
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8881 mas, bmaj=1.97 mas, bpa=-1.841 degrees
! Estimated noise=0.194536 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0024416 Jy
! Component: 100  -  total flux cleaned = -0.00337701 Jy
! Component: 150  -  total flux cleaned = -0.0038453 Jy
! Component: 200  -  total flux cleaned = -0.00425554 Jy
! Total flux subtracted in 200 components = -0.00425554 Jy
! Clean residual min=-0.012198 max=0.010271 Jy/beam
! Clean residual mean=0.000006 rms=0.002326 Jy/beam
! Combined flux in latest and established models = 0.305867 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 28 components and 0.305867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079124Jy  sigma=1.614793
! Fit after  self-cal, rms=0.079091Jy  sigma=1.613895
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8881 x 1.97 at -1.841 degrees (North through East)
! Clean map  min=-0.011824  max=0.27691 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.98     HN        0.94     KP        0.95     
!   LA        1.05     MK        1.00     NL        1.06     OV        0.90     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        0.95     KP        0.96     
!   LA        1.03     MK        1.00     NL        1.07     OV        0.90     
!   PT        1.05     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.96     HN        0.95     KP        0.97     
!   LA        1.03     MK        1.02     NL        1.06     OV        0.89     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        0.94     KP        0.97     
!   LA        1.02     MK        0.98     NL        1.07     OV        0.91     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.99     HN        0.94     KP        0.97     
!   LA        1.03     MK        0.98     NL        1.07     OV        0.90     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.97     HN        0.93     KP        0.97     
!   LA        1.04     MK        0.99     NL        1.06     OV        0.90     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        0.94     KP        0.98     
!   LA        1.03     MK        0.98     NL        1.09     OV        0.89     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.96     HN        0.96     KP        0.97     
!   LA        1.04     MK        1.00     NL        1.07     OV        0.90     
!   PT        1.05     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.98     HN        0.94     KP        0.96     
!   LA        1.03     MK        0.99     NL        1.07     OV        0.89     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.97     HN        0.95     KP        0.97     
!   LA        1.04     MK        1.03     NL        1.06     OV        0.88     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.94     KP        0.96     
!   LA        1.02     MK        1.01     NL        1.08     OV        0.90     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        0.94     KP        0.97     
!   LA        1.02     MK        1.02     NL        1.06     OV        0.91     
!   PT        1.03     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.079091Jy  sigma=1.613895
! Fit after  self-cal, rms=0.077210Jy  sigma=1.523617
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8813 mas, bmaj=1.983 mas, bpa=-1.738 degrees
! Estimated noise=0.193669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00587484 Jy
! Component: 100  -  total flux cleaned = -0.00702707 Jy
! Component: 150  -  total flux cleaned = -0.00734037 Jy
! Component: 200  -  total flux cleaned = -0.00743406 Jy
! Total flux subtracted in 200 components = -0.00743406 Jy
! Clean residual min=-0.010195 max=0.007827 Jy/beam
! Clean residual mean=0.000003 rms=0.001928 Jy/beam
! Combined flux in latest and established models = 0.298433 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 47 components and 0.298433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076618Jy  sigma=1.511639
! Fit after  self-cal, rms=0.076611Jy  sigma=1.510518
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076611Jy  sigma=1.510518
! Fit after  self-cal, rms=0.074942Jy  sigma=1.347631
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=1.993 mas, bpa=-1.902 degrees
! Estimated noise=0.196773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00210831 Jy
! Component: 100  -  total flux cleaned = -0.00310116 Jy
! Component: 150  -  total flux cleaned = -0.00349823 Jy
! Component: 200  -  total flux cleaned = -0.00339278 Jy
! Total flux subtracted in 200 components = -0.00339278 Jy
! Clean residual min=-0.005121 max=0.005203 Jy/beam
! Clean residual mean=0.000001 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 0.29504 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.29504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074408Jy  sigma=1.330799
! Fit after  self-cal, rms=0.074439Jy  sigma=1.329018
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.6, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000938235 Jy
! Component: 100  -  total flux cleaned = 0.000980584 Jy
! Component: 150  -  total flux cleaned = 0.000582547 Jy
! Component: 200  -  total flux cleaned = -8.37547e-05 Jy
! Total flux subtracted in 200 components = -8.37547e-05 Jy
! Clean residual min=-0.004784 max=0.004879 Jy/beam
! Clean residual mean=0.000000 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.294956 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.294956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073496Jy  sigma=1.317690
! Fit after  self-cal, rms=0.073443Jy  sigma=1.316271
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073443Jy  sigma=1.316271
! Fit after  self-cal, rms=0.071022Jy  sigma=1.233740
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8755 mas, bmaj=1.99 mas, bpa=-1.734 degrees
! Estimated noise=0.195976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.74453e-05 Jy
! Component: 100  -  total flux cleaned = -0.000232626 Jy
! Component: 150  -  total flux cleaned = -0.000232414 Jy
! Component: 200  -  total flux cleaned = -0.000178095 Jy
! Total flux subtracted in 200 components = -0.000178095 Jy
! Clean residual min=-0.001801 max=0.001703 Jy/beam
! Clean residual mean=-0.000000 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.294778 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 84 components and 0.294778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070909Jy  sigma=1.230795
! Fit after  self-cal, rms=0.070941Jy  sigma=1.230596
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.48889e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104001 Jy
! Component: 150  -  total flux cleaned = 0.000151048 Jy
! Component: 200  -  total flux cleaned = 0.000195062 Jy
! Total flux subtracted in 200 components = 0.000195062 Jy
! Clean residual min=-0.001659 max=0.001532 Jy/beam
! Clean residual mean=-0.000000 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.294973 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.294973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070886Jy  sigma=1.228980
! Fit after  self-cal, rms=0.070882Jy  sigma=1.228945
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070882Jy  sigma=1.228945
! Fit after  self-cal, rms=0.071068Jy  sigma=1.228660
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.079 mas, bmaj=3.194 mas, bpa=-1.085 degrees
! Estimated noise=0.257976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123604 Jy
! Component: 100  -  total flux cleaned = -0.00119109 Jy
! Component: 150  -  total flux cleaned = -0.00119105 Jy
! Component: 200  -  total flux cleaned = -0.00115749 Jy
! Total flux subtracted in 200 components = -0.00115749 Jy
! Clean residual min=-0.002024 max=0.001761 Jy/beam
! Clean residual mean=-0.000001 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.293816 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 109 components and 0.293816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071051Jy  sigma=1.228034
! Fit after  self-cal, rms=0.071049Jy  sigma=1.227959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.00167e-05 Jy
! Component: 100  -  total flux cleaned = -8.14407e-05 Jy
! Component: 150  -  total flux cleaned = -5.29952e-05 Jy
! Component: 200  -  total flux cleaned = -2.62374e-05 Jy
! Total flux subtracted in 200 components = -2.62374e-05 Jy
! Clean residual min=-0.001879 max=0.001679 Jy/beam
! Clean residual mean=-0.000000 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.29379 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 119 components and 0.29379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071039Jy  sigma=1.227544
! Fit after  self-cal, rms=0.071036Jy  sigma=1.227518
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8749 mas, bmaj=1.99 mas, bpa=-1.735 degrees
! Estimated noise=0.19573 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8749 x 1.99 at -1.735 degrees (North through East)
! Clean map  min=-0.0024611  max=0.281 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6974 mas, bmaj=1.686 mas, bpa=-1.31 degrees
! Estimated noise=0.314957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.222082 Jy
! Component: 100  -  total flux cleaned = 0.27051 Jy
! Component: 150  -  total flux cleaned = 0.282377 Jy
! Component: 200  -  total flux cleaned = 0.288429 Jy
! Total flux subtracted in 200 components = 0.288429 Jy
! Clean residual min=-0.003057 max=0.003083 Jy/beam
! Clean residual mean=0.000001 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.288429 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.288429 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8749 mas, bmaj=1.99 mas, bpa=-1.735 degrees
! Estimated noise=0.19573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314544 Jy
! Component: 100  -  total flux cleaned = 0.0039071 Jy
! Component: 150  -  total flux cleaned = 0.00426622 Jy
! Component: 200  -  total flux cleaned = 0.00456877 Jy
! Total flux subtracted in 200 components = 0.00456877 Jy
! Clean residual min=-0.001497 max=0.001843 Jy/beam
! Clean residual mean=-0.000000 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.292998 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 24 components and 0.292998 Jy
! Inverting map 
! Added new window around map position (-1.6, -15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117452 Jy
! Component: 100  -  total flux cleaned = 0.0016865 Jy
! Component: 150  -  total flux cleaned = 0.00193765 Jy
! Component: 200  -  total flux cleaned = 0.00216317 Jy
! Total flux subtracted in 200 components = 0.00216317 Jy
! Clean residual min=-0.001381 max=0.001528 Jy/beam
! Clean residual mean=-0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.295161 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 47 components and 0.295161 Jy
! Inverting map 
! Added new window around map position (-0.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467742 Jy
! Component: 100  -  total flux cleaned = 0.000458634 Jy
! Component: 150  -  total flux cleaned = 0.000578301 Jy
! Component: 200  -  total flux cleaned = 0.000614781 Jy
! Total flux subtracted in 200 components = 0.000614781 Jy
! Clean residual min=-0.001266 max=0.001080 Jy/beam
! Clean residual mean=-0.000000 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.295776 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 0.295776 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.079 mas, bmaj=3.194 mas, bpa=-1.085 degrees
! Estimated noise=0.257976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000370916 Jy
! Component: 100  -  total flux cleaned = 0.000405987 Jy
! Component: 150  -  total flux cleaned = 0.000359231 Jy
! Component: 200  -  total flux cleaned = 0.000292612 Jy
! Total flux subtracted in 200 components = 0.000292612 Jy
! Clean residual min=-0.001428 max=0.001269 Jy/beam
! Clean residual mean=-0.000000 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.296068 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.01814e-05 Jy
! Component: 100  -  total flux cleaned = -9.57252e-05 Jy
! Component: 150  -  total flux cleaned = -0.000147733 Jy
! Component: 200  -  total flux cleaned = -0.000181149 Jy
! Total flux subtracted in 200 components = -0.000181149 Jy
! Clean residual min=-0.001388 max=0.001244 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.295887 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 84 components and 0.295887 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8749 mas, bmaj=1.99 mas, bpa=-1.735 degrees
! Estimated noise=0.19573 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136068 Jy
! Component: 100  -  total flux cleaned = 0.000215084 Jy
! Component: 150  -  total flux cleaned = 0.00019417 Jy
! Component: 200  -  total flux cleaned = 0.00017366 Jy
! Total flux subtracted in 200 components = 0.00017366 Jy
! Clean residual min=-0.001185 max=0.001050 Jy/beam
! Clean residual mean=-0.000000 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.296061 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 98 components and 0.296061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070895Jy  sigma=1.223377
! Fit after  self-cal, rms=0.070876Jy  sigma=1.223043
wmodel J0916+0242_X_map.mod
! Writing 98 model components to file: J0916+0242_X_map.mod
wobs   J0916+0242_X_uvs.fits
! Writing UV FITS file: J0916+0242_X_uvs.fits
wwins  J0916+0242_X_map.win
! wwins: Wrote 6 windows to J0916+0242_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157698 Jy
! Component: 100  -  total flux cleaned = -8.01764e-05 Jy
! Component: 150  -  total flux cleaned = -4.42271e-05 Jy
! Component: 200  -  total flux cleaned = -6.2157e-05 Jy
! Component: 250  -  total flux cleaned = -6.21483e-05 Jy
! Component: 300  -  total flux cleaned = -4.55054e-05 Jy
! Component: 350  -  total flux cleaned = 2.52783e-06 Jy
! Component: 400  -  total flux cleaned = 1.78482e-05 Jy
! Component: 450  -  total flux cleaned = -1.32191e-05 Jy
! Component: 500  -  total flux cleaned = -7.39904e-05 Jy
! Component: 550  -  total flux cleaned = -7.39027e-05 Jy
! Component: 600  -  total flux cleaned = -7.41025e-05 Jy
! Component: 650  -  total flux cleaned = -0.000117338 Jy
! Component: 700  -  total flux cleaned = -0.000102853 Jy
! Component: 750  -  total flux cleaned = -0.000116774 Jy
! Component: 800  -  total flux cleaned = -0.000116753 Jy
! Component: 850  -  total flux cleaned = -0.000130434 Jy
! Component: 900  -  total flux cleaned = -0.000117152 Jy
! Component: 950  -  total flux cleaned = -0.000117279 Jy
! Component: 1000  -  total flux cleaned = -0.000103789 Jy
! Component: 1050  -  total flux cleaned = -0.000130017 Jy
! Component: 1100  -  total flux cleaned = -0.000104256 Jy
! Component: 1150  -  total flux cleaned = -0.000142705 Jy
! Component: 1200  -  total flux cleaned = -0.000155398 Jy
! Component: 1250  -  total flux cleaned = -0.000180321 Jy
! Component: 1300  -  total flux cleaned = -0.000167865 Jy
! Component: 1350  -  total flux cleaned = -0.000143459 Jy
! Component: 1400  -  total flux cleaned = -0.000179947 Jy
! Component: 1450  -  total flux cleaned = -0.000131677 Jy
! Component: 1500  -  total flux cleaned = -0.000131592 Jy
! Component: 1550  -  total flux cleaned = -0.000131629 Jy
! Component: 1600  -  total flux cleaned = -0.000143374 Jy
! Component: 1650  -  total flux cleaned = -0.000201295 Jy
! Component: 1700  -  total flux cleaned = -0.000189531 Jy
! Component: 1750  -  total flux cleaned = -0.000178056 Jy
! Component: 1800  -  total flux cleaned = -0.000200529 Jy
! Component: 1850  -  total flux cleaned = -0.000211776 Jy
! Component: 1900  -  total flux cleaned = -0.000211968 Jy
! Component: 1950  -  total flux cleaned = -0.000267235 Jy
! Component: 2000  -  total flux cleaned = -0.000245255 Jy
! Component: 2050  -  total flux cleaned = -0.000212568 Jy
! Component: 2100  -  total flux cleaned = -0.000234119 Jy
! Component: 2150  -  total flux cleaned = -0.000255552 Jy
! Component: 2200  -  total flux cleaned = -0.000212716 Jy
! Component: 2250  -  total flux cleaned = -0.000233969 Jy
! Component: 2300  -  total flux cleaned = -0.00020262 Jy
! Component: 2350  -  total flux cleaned = -0.000161019 Jy
! Component: 2400  -  total flux cleaned = -0.00017145 Jy
! Component: 2450  -  total flux cleaned = -0.000212545 Jy
! Component: 2500  -  total flux cleaned = -0.000181899 Jy
! Component: 2550  -  total flux cleaned = -0.000212368 Jy
! Component: 2600  -  total flux cleaned = -0.0001922 Jy
! Component: 2650  -  total flux cleaned = -0.000162192 Jy
! Component: 2700  -  total flux cleaned = -0.000201924 Jy
! Component: 2750  -  total flux cleaned = -0.000182106 Jy
! Component: 2800  -  total flux cleaned = -0.000182057 Jy
! Component: 2850  -  total flux cleaned = -0.000172242 Jy
! Component: 2900  -  total flux cleaned = -0.00018194 Jy
! Component: 2950  -  total flux cleaned = -0.000143462 Jy
! Component: 3000  -  total flux cleaned = -0.00020082 Jy
! Component: 3050  -  total flux cleaned = -0.000153185 Jy
! Component: 3100  -  total flux cleaned = -0.000143799 Jy
! Component: 3150  -  total flux cleaned = -0.000162482 Jy
! Component: 3200  -  total flux cleaned = -0.000116043 Jy
! Component: 3250  -  total flux cleaned = -0.000134559 Jy
! Component: 3300  -  total flux cleaned = -0.000134598 Jy
! Component: 3350  -  total flux cleaned = -0.000143673 Jy
! Component: 3400  -  total flux cleaned = -9.8323e-05 Jy
! Component: 3450  -  total flux cleaned = -0.00012541 Jy
! Component: 3500  -  total flux cleaned = -0.000161324 Jy
! Component: 3550  -  total flux cleaned = -9.88363e-05 Jy
! Component: 3600  -  total flux cleaned = -0.000116598 Jy
! Component: 3650  -  total flux cleaned = -0.000143148 Jy
! Component: 3700  -  total flux cleaned = -0.000151871 Jy
! Component: 3750  -  total flux cleaned = -0.000134341 Jy
! Component: 3800  -  total flux cleaned = -0.00014296 Jy
! Component: 3850  -  total flux cleaned = -9.99258e-05 Jy
! Component: 3900  -  total flux cleaned = -0.000151343 Jy
! Component: 3950  -  total flux cleaned = -0.000125835 Jy
! Component: 4000  -  total flux cleaned = -0.000108897 Jy
! Component: 4050  -  total flux cleaned = -0.000167934 Jy
! Total flux subtracted in 4096 components = -0.000134342 Jy
! Clean residual min=-0.000545 max=0.000457 Jy/beam
! Clean residual mean=-0.000000 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.295926 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 418 components and 0.295926 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0916+0242_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8749 x 1.99 at -1.735 degrees (North through East)
! Clean map  min=-0.0018107  max=0.28196 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0916+0242_X_map.fits
wmodel /vlbi/uf001/uva//J0916+0242_X_map.mod
! Writing 418 model components to file: /vlbi/uf001/uva//J0916+0242_X_map.mod
wobs   /vlbi/uf001/uva//J0916+0242_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0916+0242_X_uvs.fits
wwins  /vlbi/uf001/uva//J0916+0242_X_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J0916+0242_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.281962 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000145104 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.154387 0.154387 0.308773 0.617546 1.23509 2.47019 4.94037 9.88074 19.7615 39.523 79.0459
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.281 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1943.17 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0916+0242_X_dfm.log closed on Mon Jan 14 00:21:42 2019