! Started logfile: /vlbi/uf001/uva//J0915+0007_S_dfm.log on Mon Jan 14 00:20:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0915+0007_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0915+0007_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.993827 visibilities/baseline/integration-bin.
! Found source: J0915+0007
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9660 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0915+0007_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.024823Jy  sigma=19.427148
! Fit after  self-cal, rms=0.804834Jy  sigma=15.257099
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=6.792 mas, bpa=-2.548 degrees
! Estimated noise=0.546849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147642 Jy
! Component: 100  -  total flux cleaned = 0.215259 Jy
! Total flux subtracted in 100 components = 0.215259 Jy
! Clean residual min=-0.011436 max=0.031762 Jy/beam
! Clean residual mean=0.000031 rms=0.003494 Jy/beam
! Combined flux in latest and established models = 0.215259 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.215259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096072Jy  sigma=1.770924
! Fit after  self-cal, rms=0.095433Jy  sigma=1.759196
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0366986 Jy
! Component: 100  -  total flux cleaned = 0.0565921 Jy
! Total flux subtracted in 100 components = 0.0565921 Jy
! Clean residual min=-0.006596 max=0.012652 Jy/beam
! Clean residual mean=0.000006 rms=0.002077 Jy/beam
! Combined flux in latest and established models = 0.271852 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.271851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077500Jy  sigma=1.395591
! Fit after  self-cal, rms=0.077447Jy  sigma=1.394625
! Inverting map 
! Added new window around map position (4.5, -1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138742 Jy
! Component: 100  -  total flux cleaned = 0.0235518 Jy
! Total flux subtracted in 100 components = 0.0235518 Jy
! Clean residual min=-0.005531 max=0.008354 Jy/beam
! Clean residual mean=-0.000003 rms=0.001736 Jy/beam
! Combined flux in latest and established models = 0.295403 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 49 components and 0.295403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074233Jy  sigma=1.329747
! Fit after  self-cal, rms=0.074208Jy  sigma=1.329140
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=7.74 mas, bpa=-2.956 degrees
! Estimated noise=0.385591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00896563 Jy
! Component: 100  -  total flux cleaned = 0.0151055 Jy
! Component: 150  -  total flux cleaned = 0.0194238 Jy
! Component: 200  -  total flux cleaned = 0.0224864 Jy
! Total flux subtracted in 200 components = 0.0224864 Jy
! Clean residual min=-0.005558 max=0.007691 Jy/beam
! Clean residual mean=-0.000027 rms=0.001896 Jy/beam
! Combined flux in latest and established models = 0.31789 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 74 components and 0.31789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072847Jy  sigma=1.303417
! Fit after  self-cal, rms=0.072812Jy  sigma=1.302534
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.339 x 7.74 at -2.956 degrees (North through East)
! Clean map  min=-0.005481  max=0.18977 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        0.97     KP        0.98     
!   LA        0.93     MK        1.04     NL        1.02     OV        0.96     
!   PT        1.07     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        0.94     HN        0.97     KP        0.99     
!   LA        0.95     MK        1.04     NL        1.05     OV        0.95     
!   PT        1.09     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.95     HN        1.00     KP        0.99     
!   LA        0.93     MK        1.04     NL        1.04     OV        0.95     
!   PT        1.10     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.072812Jy  sigma=1.302534
! Fit after  self-cal, rms=0.072981Jy  sigma=1.256747
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.338 mas, bmaj=7.744 mas, bpa=-2.049 degrees
! Estimated noise=0.382383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446522 Jy
! Component: 100  -  total flux cleaned = 0.00050207 Jy
! Component: 150  -  total flux cleaned = 0.000500048 Jy
! Component: 200  -  total flux cleaned = 0.000358516 Jy
! Total flux subtracted in 200 components = 0.000358516 Jy
! Clean residual min=-0.005000 max=0.005322 Jy/beam
! Clean residual mean=-0.000036 rms=0.001426 Jy/beam
! Combined flux in latest and established models = 0.318248 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.318248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072861Jy  sigma=1.255274
! Fit after  self-cal, rms=0.072908Jy  sigma=1.254944
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072908Jy  sigma=1.254944
! Fit after  self-cal, rms=0.071877Jy  sigma=1.167788
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.324 mas, bmaj=7.739 mas, bpa=-2.217 degrees
! Estimated noise=0.383815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226346 Jy
! Component: 100  -  total flux cleaned = -0.000126192 Jy
! Component: 150  -  total flux cleaned = -3.79789e-05 Jy
! Component: 200  -  total flux cleaned = 1.18933e-06 Jy
! Total flux subtracted in 200 components = 1.18933e-06 Jy
! Clean residual min=-0.001926 max=0.002561 Jy/beam
! Clean residual mean=-0.000006 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.318249 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 99 components and 0.318249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071808Jy  sigma=1.166576
! Fit after  self-cal, rms=0.071873Jy  sigma=1.166255
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (71, -111).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166413 Jy
! Component: 100  -  total flux cleaned = 0.00199395 Jy
! Component: 150  -  total flux cleaned = 0.00199378 Jy
! Component: 200  -  total flux cleaned = 0.00184284 Jy
! Total flux subtracted in 200 components = 0.00184284 Jy
! Clean residual min=-0.001950 max=0.002284 Jy/beam
! Clean residual mean=-0.000008 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.320092 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 117 components and 0.320092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071765Jy  sigma=1.164763
! Fit after  self-cal, rms=0.071758Jy  sigma=1.164619
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071758Jy  sigma=1.164619
! Fit after  self-cal, rms=0.071505Jy  sigma=1.153938
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.32 mas, bmaj=7.739 mas, bpa=-2.282 degrees
! Estimated noise=0.383031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.672e-05 Jy
! Component: 100  -  total flux cleaned = -5.8976e-05 Jy
! Component: 150  -  total flux cleaned = -3.49597e-05 Jy
! Component: 200  -  total flux cleaned = -3.41381e-05 Jy
! Total flux subtracted in 200 components = -3.41381e-05 Jy
! Clean residual min=-0.001682 max=0.001615 Jy/beam
! Clean residual mean=-0.000001 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.320058 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 131 components and 0.320058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071483Jy  sigma=1.153448
! Fit after  self-cal, rms=0.071487Jy  sigma=1.153400
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.06005e-06 Jy
! Component: 100  -  total flux cleaned = 5.99368e-05 Jy
! Component: 150  -  total flux cleaned = 4.03166e-05 Jy
! Component: 200  -  total flux cleaned = 4.02152e-05 Jy
! Total flux subtracted in 200 components = 4.02152e-05 Jy
! Clean residual min=-0.001656 max=0.001590 Jy/beam
! Clean residual mean=-0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.320098 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 140 components and 0.320098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071477Jy  sigma=1.153185
! Fit after  self-cal, rms=0.071477Jy  sigma=1.153182
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071477Jy  sigma=1.153182
! Fit after  self-cal, rms=0.071574Jy  sigma=1.153136
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.26 mas, bmaj=11.94 mas, bpa=-3.868 degrees
! Estimated noise=0.496499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138795 Jy
! Component: 100  -  total flux cleaned = 0.000103027 Jy
! Component: 150  -  total flux cleaned = 7.23141e-05 Jy
! Component: 200  -  total flux cleaned = 5.94054e-05 Jy
! Total flux subtracted in 200 components = 5.94054e-05 Jy
! Clean residual min=-0.001611 max=0.001855 Jy/beam
! Clean residual mean=-0.000001 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.320158 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 149 components and 0.320158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071569Jy  sigma=1.153095
! Fit after  self-cal, rms=0.071570Jy  sigma=1.153078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.57794e-05 Jy
! Component: 100  -  total flux cleaned = 1.38441e-05 Jy
! Component: 150  -  total flux cleaned = 2.35008e-06 Jy
! Component: 200  -  total flux cleaned = 2.28808e-06 Jy
! Total flux subtracted in 200 components = 2.28808e-06 Jy
! Clean residual min=-0.001596 max=0.001818 Jy/beam
! Clean residual mean=-0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.32016 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 154 components and 0.32016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071568Jy  sigma=1.153083
! Fit after  self-cal, rms=0.071569Jy  sigma=1.153080
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.318 mas, bmaj=7.743 mas, bpa=-2.345 degrees
! Estimated noise=0.382889 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.318 x 7.743 at -2.345 degrees (North through East)
! Clean map  min=-0.001549  max=0.18868 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.801 mas, bmaj=6.809 mas, bpa=-2.007 degrees
! Estimated noise=0.539346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.14645 Jy
! Component: 100  -  total flux cleaned = 0.214383 Jy
! Component: 150  -  total flux cleaned = 0.250132 Jy
! Component: 200  -  total flux cleaned = 0.270236 Jy
! Total flux subtracted in 200 components = 0.270236 Jy
! Clean residual min=-0.004625 max=0.010299 Jy/beam
! Clean residual mean=0.000018 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.270236 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.270236 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.318 mas, bmaj=7.743 mas, bpa=-2.345 degrees
! Estimated noise=0.382889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166271 Jy
! Component: 100  -  total flux cleaned = 0.0259417 Jy
! Component: 150  -  total flux cleaned = 0.031891 Jy
! Component: 200  -  total flux cleaned = 0.0359933 Jy
! Total flux subtracted in 200 components = 0.0359933 Jy
! Clean residual min=-0.002176 max=0.002680 Jy/beam
! Clean residual mean=0.000004 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.30623 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 88 components and 0.30623 Jy
! Inverting map 
! Added new window around map position (9, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310906 Jy
! Component: 100  -  total flux cleaned = 0.00545863 Jy
! Component: 150  -  total flux cleaned = 0.00732467 Jy
! Component: 200  -  total flux cleaned = 0.00884271 Jy
! Total flux subtracted in 200 components = 0.00884271 Jy
! Clean residual min=-0.001842 max=0.001574 Jy/beam
! Clean residual mean=0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.315072 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 118 components and 0.315072 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.26 mas, bmaj=11.94 mas, bpa=-3.868 degrees
! Estimated noise=0.496499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199826 Jy
! Component: 100  -  total flux cleaned = 0.00323294 Jy
! Component: 150  -  total flux cleaned = 0.00409801 Jy
! Component: 200  -  total flux cleaned = 0.00452308 Jy
! Total flux subtracted in 200 components = 0.00452308 Jy
! Clean residual min=-0.001626 max=0.001658 Jy/beam
! Clean residual mean=-0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.319595 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138414 Jy
! Component: 100  -  total flux cleaned = 0.000247967 Jy
! Component: 150  -  total flux cleaned = 0.00033063 Jy
! Component: 200  -  total flux cleaned = 0.000409113 Jy
! Total flux subtracted in 200 components = 0.000409113 Jy
! Clean residual min=-0.001597 max=0.001647 Jy/beam
! Clean residual mean=-0.000000 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.320004 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 146 components and 0.320004 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.318 mas, bmaj=7.743 mas, bpa=-2.345 degrees
! Estimated noise=0.382889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000677704 Jy
! Component: 100  -  total flux cleaned = -0.000601697 Jy
! Component: 150  -  total flux cleaned = -0.000567001 Jy
! Component: 200  -  total flux cleaned = -0.000537583 Jy
! Total flux subtracted in 200 components = -0.000537583 Jy
! Clean residual min=-0.001638 max=0.001565 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.319467 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 163 components and 0.319467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071571Jy  sigma=1.152668
! Fit after  self-cal, rms=0.071560Jy  sigma=1.152565
wmodel J0915+0007_S_map.mod
! Writing 163 model components to file: J0915+0007_S_map.mod
wobs   J0915+0007_S_uvs.fits
! Writing UV FITS file: J0915+0007_S_uvs.fits
wwins  J0915+0007_S_map.win
! wwins: Wrote 4 windows to J0915+0007_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000289948 Jy
! Component: 100  -  total flux cleaned = -0.00060646 Jy
! Component: 150  -  total flux cleaned = -0.000827228 Jy
! Component: 200  -  total flux cleaned = -0.00101411 Jy
! Component: 250  -  total flux cleaned = -0.00114804 Jy
! Component: 300  -  total flux cleaned = -0.00121228 Jy
! Component: 350  -  total flux cleaned = -0.00121268 Jy
! Component: 400  -  total flux cleaned = -0.00121305 Jy
! Component: 450  -  total flux cleaned = -0.0011933 Jy
! Component: 500  -  total flux cleaned = -0.00121308 Jy
! Component: 550  -  total flux cleaned = -0.00117418 Jy
! Component: 600  -  total flux cleaned = -0.00121198 Jy
! Component: 650  -  total flux cleaned = -0.00121146 Jy
! Component: 700  -  total flux cleaned = -0.00121119 Jy
! Component: 750  -  total flux cleaned = -0.00117447 Jy
! Component: 800  -  total flux cleaned = -0.00115649 Jy
! Component: 850  -  total flux cleaned = -0.00108606 Jy
! Component: 900  -  total flux cleaned = -0.00113879 Jy
! Component: 950  -  total flux cleaned = -0.00115584 Jy
! Component: 1000  -  total flux cleaned = -0.00113857 Jy
! Component: 1050  -  total flux cleaned = -0.00115503 Jy
! Component: 1100  -  total flux cleaned = -0.00110498 Jy
! Component: 1150  -  total flux cleaned = -0.00110506 Jy
! Component: 1200  -  total flux cleaned = -0.00113768 Jy
! Component: 1250  -  total flux cleaned = -0.00112151 Jy
! Component: 1300  -  total flux cleaned = -0.00107373 Jy
! Component: 1350  -  total flux cleaned = -0.00104236 Jy
! Component: 1400  -  total flux cleaned = -0.00104246 Jy
! Component: 1450  -  total flux cleaned = -0.00102704 Jy
! Component: 1500  -  total flux cleaned = -0.000996522 Jy
! Component: 1550  -  total flux cleaned = -0.000981236 Jy
! Component: 1600  -  total flux cleaned = -0.000936494 Jy
! Component: 1650  -  total flux cleaned = -0.000892581 Jy
! Component: 1700  -  total flux cleaned = -0.000907328 Jy
! Component: 1750  -  total flux cleaned = -0.000921869 Jy
! Component: 1800  -  total flux cleaned = -0.000979076 Jy
! Component: 1850  -  total flux cleaned = -0.00104985 Jy
! Component: 1900  -  total flux cleaned = -0.000979454 Jy
! Component: 1950  -  total flux cleaned = -0.000993316 Jy
! Component: 2000  -  total flux cleaned = -0.00100701 Jy
! Component: 2050  -  total flux cleaned = -0.000993425 Jy
! Component: 2100  -  total flux cleaned = -0.00102037 Jy
! Component: 2150  -  total flux cleaned = -0.00104734 Jy
! Component: 2200  -  total flux cleaned = -0.00104716 Jy
! Component: 2250  -  total flux cleaned = -0.00108678 Jy
! Component: 2300  -  total flux cleaned = -0.00111298 Jy
! Component: 2350  -  total flux cleaned = -0.00112605 Jy
! Component: 2400  -  total flux cleaned = -0.00110029 Jy
! Component: 2450  -  total flux cleaned = -0.00112584 Jy
! Component: 2500  -  total flux cleaned = -0.00116395 Jy
! Component: 2550  -  total flux cleaned = -0.00121406 Jy
! Component: 2600  -  total flux cleaned = -0.00117661 Jy
! Component: 2650  -  total flux cleaned = -0.00113964 Jy
! Component: 2700  -  total flux cleaned = -0.00118874 Jy
! Component: 2750  -  total flux cleaned = -0.00121321 Jy
! Component: 2800  -  total flux cleaned = -0.00128565 Jy
! Component: 2850  -  total flux cleaned = -0.0012617 Jy
! Component: 2900  -  total flux cleaned = -0.00129734 Jy
! Component: 2950  -  total flux cleaned = -0.00132087 Jy
! Component: 3000  -  total flux cleaned = -0.0013325 Jy
! Component: 3050  -  total flux cleaned = -0.00136742 Jy
! Component: 3100  -  total flux cleaned = -0.00136761 Jy
! Component: 3150  -  total flux cleaned = -0.00141339 Jy
! Component: 3200  -  total flux cleaned = -0.00145882 Jy
! Component: 3250  -  total flux cleaned = -0.00148147 Jy
! Component: 3300  -  total flux cleaned = -0.00147021 Jy
! Component: 3350  -  total flux cleaned = -0.00148148 Jy
! Component: 3400  -  total flux cleaned = -0.00148162 Jy
! Component: 3450  -  total flux cleaned = -0.00153659 Jy
! Component: 3500  -  total flux cleaned = -0.00153672 Jy
! Component: 3550  -  total flux cleaned = -0.00151512 Jy
! Component: 3600  -  total flux cleaned = -0.00157944 Jy
! Component: 3650  -  total flux cleaned = -0.00157948 Jy
! Component: 3700  -  total flux cleaned = -0.00161127 Jy
! Component: 3750  -  total flux cleaned = -0.00155856 Jy
! Component: 3800  -  total flux cleaned = -0.00154823 Jy
! Component: 3850  -  total flux cleaned = -0.00157946 Jy
! Component: 3900  -  total flux cleaned = -0.00154849 Jy
! Component: 3950  -  total flux cleaned = -0.00154844 Jy
! Component: 4000  -  total flux cleaned = -0.00153824 Jy
! Component: 4050  -  total flux cleaned = -0.00156863 Jy
! Total flux subtracted in 4096 components = -0.0015586 Jy
! Clean residual min=-0.000552 max=0.000592 Jy/beam
! Clean residual mean=0.000000 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.317908 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 468 components and 0.317908 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0915+0007_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.318 x 7.743 at -2.345 degrees (North through East)
! Clean map  min=-0.0010149  max=0.19049 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0915+0007_S_map.fits
wmodel /vlbi/uf001/uva//J0915+0007_S_map.mod
! Writing 468 model components to file: /vlbi/uf001/uva//J0915+0007_S_map.mod
wobs   /vlbi/uf001/uva//J0915+0007_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0915+0007_S_uvs.fits
wwins  /vlbi/uf001/uva//J0915+0007_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0915+0007_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.190488 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000184678 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.290851 0.290851 0.581701 1.1634 2.3268 4.65361 9.30722 18.6144 37.2289 74.4578
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.19 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1031.46 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0915+0007_S_dfm.log closed on Mon Jan 14 00:20:32 2019