! Started logfile: /vlbi/uf001/uva//J0914-2733_X_dfm.log on Mon Jan 14 00:20:21 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0914-2733_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0914-2733_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.995785 visibilities/baseline/integration-bin.
! Found source: J0914-2733
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31188 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0914-2733_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002597Jy  sigma=19.701703
! Fit after  self-cal, rms=0.923196Jy  sigma=18.042574
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6204 mas, bmaj=1.643 mas, bpa=-8.69 degrees
! Estimated noise=0.458328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0553308 Jy
! Component: 100  -  total flux cleaned = 0.0729374 Jy
! Total flux subtracted in 100 components = 0.0729374 Jy
! Clean residual min=-0.004996 max=0.009727 Jy/beam
! Clean residual mean=-0.000009 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.0729374 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0729374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072125Jy  sigma=1.316801
! Fit after  self-cal, rms=0.071760Jy  sigma=1.310484
! Inverting map 
! Added new window around map position (-0.6, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102462 Jy
! Component: 100  -  total flux cleaned = 0.0161679 Jy
! Total flux subtracted in 100 components = 0.0161679 Jy
! Clean residual min=-0.005063 max=0.006741 Jy/beam
! Clean residual mean=-0.000006 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.0891053 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.0891053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069530Jy  sigma=1.251889
! Fit after  self-cal, rms=0.069439Jy  sigma=1.249954
! Inverting map 
! Added new window around map position (1, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0059213 Jy
! Component: 100  -  total flux cleaned = 0.00978759 Jy
! Total flux subtracted in 100 components = 0.00978759 Jy
! Clean residual min=-0.004186 max=0.004067 Jy/beam
! Clean residual mean=-0.000005 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.0988928 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.0988929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068766Jy  sigma=1.232093
! Fit after  self-cal, rms=0.068733Jy  sigma=1.231369
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8132 mas, bmaj=2.069 mas, bpa=-6.713 degrees
! Estimated noise=0.21165 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494755 Jy
! Component: 100  -  total flux cleaned = 0.0077662 Jy
! Component: 150  -  total flux cleaned = 0.00949515 Jy
! Component: 200  -  total flux cleaned = 0.010463 Jy
! Total flux subtracted in 200 components = 0.010463 Jy
! Clean residual min=-0.002630 max=0.003338 Jy/beam
! Clean residual mean=-0.000004 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.109356 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 43 components and 0.109356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068435Jy  sigma=1.222271
! Fit after  self-cal, rms=0.068426Jy  sigma=1.221866
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8132 x 2.069 at -6.713 degrees (North through East)
! Clean map  min=-0.0025291  max=0.072558 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.97     HN        1.12     KP        0.94     
!   LA        1.00     MK        1.04     NL        1.07     OV        0.90     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.05     HN        1.04     KP        0.95     
!   LA        0.99     MK        0.99     NL        1.10     OV        0.89     
!   PT        0.91     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.02     HN        1.05     KP        0.95     
!   LA        0.96     MK        0.98     NL        1.09     OV        0.92     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        1.07     KP        0.98     
!   LA        0.97     MK        0.96     NL        1.17     OV        0.90     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.03     NL        1.12     OV        0.87     
!   PT        0.95     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.02     HN        1.12     KP        0.97     
!   LA        0.97     MK        0.98     NL        1.08     OV        0.91     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.01     HN        1.19     KP        0.99     
!   LA        0.98     MK        0.98     NL        1.12     OV        0.88     
!   PT        0.90     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.01     HN        1.06     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.09     OV        0.88     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.04     HN        1.02     KP        0.93     
!   LA        0.99     MK        1.01     NL        1.11     OV        0.91     
!   PT        0.93     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.04     HN        0.94     KP        1.01     
!   LA        0.99     MK        0.97     NL        1.16     OV        0.85     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.00     HN        1.05     KP        0.97     
!   LA        0.97     MK        0.96     NL        1.10     OV        0.89     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.01     HN        1.08     KP        0.96     
!   LA        1.02     MK        1.00     NL        1.13     OV        0.91     
!   PT        0.93     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.068426Jy  sigma=1.221866
! Fit after  self-cal, rms=0.070209Jy  sigma=1.209004
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8124 mas, bmaj=2.07 mas, bpa=-6.414 degrees
! Estimated noise=0.211589 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117474 Jy
! Component: 100  -  total flux cleaned = -0.00136163 Jy
! Component: 150  -  total flux cleaned = -0.00153331 Jy
! Component: 200  -  total flux cleaned = -0.0015953 Jy
! Total flux subtracted in 200 components = -0.0015953 Jy
! Clean residual min=-0.001588 max=0.001508 Jy/beam
! Clean residual mean=-0.000000 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.107761 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.107761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070174Jy  sigma=1.208375
! Fit after  self-cal, rms=0.070273Jy  sigma=1.207883
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070273Jy  sigma=1.207883
! Fit after  self-cal, rms=0.071190Jy  sigma=1.205610
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8144 mas, bmaj=2.071 mas, bpa=-6.309 degrees
! Estimated noise=0.212042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000810954 Jy
! Component: 100  -  total flux cleaned = -0.000952776 Jy
! Component: 150  -  total flux cleaned = -0.00102022 Jy
! Component: 200  -  total flux cleaned = -0.00104859 Jy
! Total flux subtracted in 200 components = -0.00104859 Jy
! Clean residual min=-0.001249 max=0.001201 Jy/beam
! Clean residual mean=0.000000 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.106712 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.106712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071172Jy  sigma=1.205298
! Fit after  self-cal, rms=0.071192Jy  sigma=1.205201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000169172 Jy
! Component: 100  -  total flux cleaned = -0.000198713 Jy
! Component: 150  -  total flux cleaned = -0.000222626 Jy
! Component: 200  -  total flux cleaned = -0.00024432 Jy
! Total flux subtracted in 200 components = -0.00024432 Jy
! Clean residual min=-0.001201 max=0.001150 Jy/beam
! Clean residual mean=-0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.106468 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 63 components and 0.106468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071186Jy  sigma=1.205095
! Fit after  self-cal, rms=0.071185Jy  sigma=1.205074
! Inverting map 
! Added new window around map position (-2.2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000924877 Jy
! Component: 100  -  total flux cleaned = 0.00113196 Jy
! Component: 150  -  total flux cleaned = 0.00125124 Jy
! Component: 200  -  total flux cleaned = 0.00127201 Jy
! Total flux subtracted in 200 components = 0.00127201 Jy
! Clean residual min=-0.001171 max=0.001059 Jy/beam
! Clean residual mean=0.000000 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.10774 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 77 components and 0.10774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071157Jy  sigma=1.204580
! Fit after  self-cal, rms=0.071153Jy  sigma=1.204524
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071153Jy  sigma=1.204524
! Fit after  self-cal, rms=0.072061Jy  sigma=1.204091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8135 mas, bmaj=2.065 mas, bpa=-6.104 degrees
! Estimated noise=0.211839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019161 Jy
! Component: 100  -  total flux cleaned = -0.000254861 Jy
! Component: 150  -  total flux cleaned = -0.000307562 Jy
! Component: 200  -  total flux cleaned = -0.000322508 Jy
! Total flux subtracted in 200 components = -0.000322508 Jy
! Clean residual min=-0.001128 max=0.001037 Jy/beam
! Clean residual mean=0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.107417 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.107417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072049Jy  sigma=1.203907
! Fit after  self-cal, rms=0.072064Jy  sigma=1.203881
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.09219e-06 Jy
! Component: 100  -  total flux cleaned = 1.91307e-05 Jy
! Component: 150  -  total flux cleaned = 1.90563e-05 Jy
! Component: 200  -  total flux cleaned = 1.88669e-05 Jy
! Total flux subtracted in 200 components = 1.88669e-05 Jy
! Clean residual min=-0.001113 max=0.001053 Jy/beam
! Clean residual mean=0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.107436 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 88 components and 0.107436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072058Jy  sigma=1.203804
! Fit after  self-cal, rms=0.072058Jy  sigma=1.203796
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072058Jy  sigma=1.203796
! Fit after  self-cal, rms=0.072294Jy  sigma=1.203772
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=5.465 mas, bpa=-2.083 degrees
! Estimated noise=0.269714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000270724 Jy
! Component: 100  -  total flux cleaned = -0.000333705 Jy
! Component: 150  -  total flux cleaned = -0.000366266 Jy
! Component: 200  -  total flux cleaned = -0.000366624 Jy
! Total flux subtracted in 200 components = -0.000366624 Jy
! Clean residual min=-0.001035 max=0.001096 Jy/beam
! Clean residual mean=0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.107069 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 99 components and 0.107069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072290Jy  sigma=1.203737
! Fit after  self-cal, rms=0.072294Jy  sigma=1.203734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.85704e-05 Jy
! Component: 100  -  total flux cleaned = -3.15897e-05 Jy
! Component: 150  -  total flux cleaned = -2.55305e-05 Jy
! Component: 200  -  total flux cleaned = -2.53426e-05 Jy
! Total flux subtracted in 200 components = -2.53426e-05 Jy
! Clean residual min=-0.001025 max=0.001094 Jy/beam
! Clean residual mean=0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.107044 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 0.107044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072292Jy  sigma=1.203729
! Fit after  self-cal, rms=0.072292Jy  sigma=1.203728
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=2.063 mas, bpa=-6.009 degrees
! Estimated noise=0.211527 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8136 x 2.063 at -6.009 degrees (North through East)
! Clean map  min=-0.0014809  max=0.072802 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6213 mas, bmaj=1.63 mas, bpa=-7.836 degrees
! Estimated noise=0.461403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562192 Jy
! Component: 100  -  total flux cleaned = 0.0759976 Jy
! Component: 150  -  total flux cleaned = 0.0853281 Jy
! Component: 200  -  total flux cleaned = 0.0910362 Jy
! Total flux subtracted in 200 components = 0.0910362 Jy
! Clean residual min=-0.002582 max=0.003158 Jy/beam
! Clean residual mean=-0.000004 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.0910361 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0910361 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=2.063 mas, bpa=-6.009 degrees
! Estimated noise=0.211527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00652153 Jy
! Component: 100  -  total flux cleaned = 0.00991407 Jy
! Component: 150  -  total flux cleaned = 0.012063 Jy
! Component: 200  -  total flux cleaned = 0.0135417 Jy
! Total flux subtracted in 200 components = 0.0135417 Jy
! Clean residual min=-0.001190 max=0.001177 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.104578 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 57 components and 0.104578 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=5.465 mas, bpa=-2.083 degrees
! Estimated noise=0.269714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141026 Jy
! Component: 100  -  total flux cleaned = 0.00190457 Jy
! Component: 150  -  total flux cleaned = 0.00207166 Jy
! Component: 200  -  total flux cleaned = 0.00217009 Jy
! Total flux subtracted in 200 components = 0.00217009 Jy
! Clean residual min=-0.001028 max=0.001124 Jy/beam
! Clean residual mean=0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.106748 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.36753e-05 Jy
! Component: 100  -  total flux cleaned = 0.000170291 Jy
! Component: 150  -  total flux cleaned = 0.000217001 Jy
! Component: 200  -  total flux cleaned = 0.000258536 Jy
! Total flux subtracted in 200 components = 0.000258536 Jy
! Clean residual min=-0.000988 max=0.001106 Jy/beam
! Clean residual mean=0.000000 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.107006 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 86 components and 0.107006 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=2.063 mas, bpa=-6.009 degrees
! Estimated noise=0.211527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192456 Jy
! Component: 100  -  total flux cleaned = 0.000130767 Jy
! Component: 150  -  total flux cleaned = 0.00011345 Jy
! Component: 200  -  total flux cleaned = 8.05982e-05 Jy
! Total flux subtracted in 200 components = 8.05982e-05 Jy
! Clean residual min=-0.000997 max=0.001004 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.107087 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.107087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072308Jy  sigma=1.203922
! Fit after  self-cal, rms=0.072297Jy  sigma=1.203815
wmodel J0914-2733_X_map.mod
! Writing 99 model components to file: J0914-2733_X_map.mod
wobs   J0914-2733_X_uvs.fits
! Writing UV FITS file: J0914-2733_X_uvs.fits
wwins  J0914-2733_X_map.win
! wwins: Wrote 4 windows to J0914-2733_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 5.27523e-05 Jy
! Component: 100  -  total flux cleaned = 1.93496e-05 Jy
! Component: 150  -  total flux cleaned = -6.30069e-05 Jy
! Component: 200  -  total flux cleaned = -9.49858e-05 Jy
! Component: 250  -  total flux cleaned = -9.48027e-05 Jy
! Component: 300  -  total flux cleaned = -9.43559e-05 Jy
! Component: 350  -  total flux cleaned = -6.47274e-05 Jy
! Component: 400  -  total flux cleaned = -5.04137e-05 Jy
! Component: 450  -  total flux cleaned = -6.43007e-05 Jy
! Component: 500  -  total flux cleaned = -7.81136e-05 Jy
! Component: 550  -  total flux cleaned = -0.000105318 Jy
! Component: 600  -  total flux cleaned = -0.000118574 Jy
! Component: 650  -  total flux cleaned = -0.000118614 Jy
! Component: 700  -  total flux cleaned = -0.000170694 Jy
! Component: 750  -  total flux cleaned = -0.000157529 Jy
! Component: 800  -  total flux cleaned = -0.000119839 Jy
! Component: 850  -  total flux cleaned = -0.000107574 Jy
! Component: 900  -  total flux cleaned = -7.07956e-05 Jy
! Component: 950  -  total flux cleaned = -5.86373e-05 Jy
! Component: 1000  -  total flux cleaned = -4.64046e-05 Jy
! Component: 1050  -  total flux cleaned = -3.43907e-05 Jy
! Component: 1100  -  total flux cleaned = -5.78161e-05 Jy
! Component: 1150  -  total flux cleaned = -8.10378e-05 Jy
! Component: 1200  -  total flux cleaned = -5.78024e-05 Jy
! Component: 1250  -  total flux cleaned = -4.64227e-05 Jy
! Component: 1300  -  total flux cleaned = -5.7738e-05 Jy
! Component: 1350  -  total flux cleaned = -3.5273e-05 Jy
! Component: 1400  -  total flux cleaned = -2.42321e-05 Jy
! Component: 1450  -  total flux cleaned = -3.5307e-05 Jy
! Component: 1500  -  total flux cleaned = 5.19227e-05 Jy
! Component: 1550  -  total flux cleaned = 6.27734e-05 Jy
! Component: 1600  -  total flux cleaned = 9.49765e-05 Jy
! Component: 1650  -  total flux cleaned = 0.000137344 Jy
! Component: 1700  -  total flux cleaned = 0.000189945 Jy
! Component: 1750  -  total flux cleaned = 0.000179487 Jy
! Component: 1800  -  total flux cleaned = 0.000283028 Jy
! Component: 1850  -  total flux cleaned = 0.000313905 Jy
! Component: 1900  -  total flux cleaned = 0.000334215 Jy
! Component: 1950  -  total flux cleaned = 0.000364573 Jy
! Component: 2000  -  total flux cleaned = 0.000434685 Jy
! Component: 2050  -  total flux cleaned = 0.000474478 Jy
! Component: 2100  -  total flux cleaned = 0.00048429 Jy
! Component: 2150  -  total flux cleaned = 0.000503949 Jy
! Component: 2200  -  total flux cleaned = 0.000542829 Jy
! Component: 2250  -  total flux cleaned = 0.000591031 Jy
! Component: 2300  -  total flux cleaned = 0.000648593 Jy
! Component: 2350  -  total flux cleaned = 0.000715113 Jy
! Component: 2400  -  total flux cleaned = 0.000705598 Jy
! Component: 2450  -  total flux cleaned = 0.000752499 Jy
! Component: 2500  -  total flux cleaned = 0.00080838 Jy
! Component: 2550  -  total flux cleaned = 0.000845494 Jy
! Component: 2600  -  total flux cleaned = 0.000882268 Jy
! Component: 2650  -  total flux cleaned = 0.000964463 Jy
! Component: 2700  -  total flux cleaned = 0.000973397 Jy
! Component: 2750  -  total flux cleaned = 0.000982368 Jy
! Component: 2800  -  total flux cleaned = 0.00104504 Jy
! Component: 2850  -  total flux cleaned = 0.00106288 Jy
! Component: 2900  -  total flux cleaned = 0.00111593 Jy
! Component: 2950  -  total flux cleaned = 0.00115115 Jy
! Component: 3000  -  total flux cleaned = 0.00116864 Jy
! Component: 3050  -  total flux cleaned = 0.00122944 Jy
! Component: 3100  -  total flux cleaned = 0.00125539 Jy
! Component: 3150  -  total flux cleaned = 0.00126385 Jy
! Component: 3200  -  total flux cleaned = 0.00131491 Jy
! Component: 3250  -  total flux cleaned = 0.00127252 Jy
! Component: 3300  -  total flux cleaned = 0.00132314 Jy
! Component: 3350  -  total flux cleaned = 0.00131475 Jy
! Component: 3400  -  total flux cleaned = 0.0013481 Jy
! Component: 3450  -  total flux cleaned = 0.00137301 Jy
! Component: 3500  -  total flux cleaned = 0.00140591 Jy
! Component: 3550  -  total flux cleaned = 0.00143869 Jy
! Component: 3600  -  total flux cleaned = 0.00145496 Jy
! Component: 3650  -  total flux cleaned = 0.00152785 Jy
! Component: 3700  -  total flux cleaned = 0.00153589 Jy
! Component: 3750  -  total flux cleaned = 0.00151987 Jy
! Component: 3800  -  total flux cleaned = 0.0015917 Jy
! Component: 3850  -  total flux cleaned = 0.00160757 Jy
! Component: 3900  -  total flux cleaned = 0.00160753 Jy
! Component: 3950  -  total flux cleaned = 0.00163897 Jy
! Component: 4000  -  total flux cleaned = 0.0016624 Jy
! Component: 4050  -  total flux cleaned = 0.00166232 Jy
! Total flux subtracted in 4096 components = 0.00167782 Jy
! Clean residual min=-0.000514 max=0.000467 Jy/beam
! Clean residual mean=-0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.108765 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 372 components and 0.108765 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0914-2733_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8136 x 2.063 at -6.009 degrees (North through East)
! Clean map  min=-0.00089805  max=0.073297 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0914-2733_X_map.fits
wmodel /vlbi/uf001/uva//J0914-2733_X_map.mod
! Writing 372 model components to file: /vlbi/uf001/uva//J0914-2733_X_map.mod
wobs   /vlbi/uf001/uva//J0914-2733_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0914-2733_X_uvs.fits
wwins  /vlbi/uf001/uva//J0914-2733_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0914-2733_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0732968 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00013025 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.533106 0.533106 1.06621 2.13243 4.26485 8.5297 17.0594 34.1188 68.2376
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  562.739 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0914-2733_X_dfm.log closed on Mon Jan 14 00:20:26 2019