! Started logfile: /vlbi/uf001/uva//J0910-0526_X_dfm.log on Mon Jan 14 00:18:31 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0910-0526_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0910-0526_X_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.930779 visibilities/baseline/integration-bin. ! Found source: J0910-0526 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 43728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0910-0526_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003107Jy sigma=22.751485 ! Fit after self-cal, rms=0.956948Jy sigma=21.697983 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6552 mas, bmaj=1.681 mas, bpa=-1.772 degrees ! Estimated noise=0.301785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306949 Jy ! Component: 100 - total flux cleaned = 0.0397745 Jy ! Total flux subtracted in 100 components = 0.0397745 Jy ! Clean residual min=-0.003768 max=0.013011 Jy/beam ! Clean residual mean=-0.000003 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.0397745 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0397745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071728Jy sigma=1.583025 ! Fit after self-cal, rms=0.070268Jy sigma=1.550119 ! Inverting map ! Added new window around map position (2.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122538 Jy ! Component: 100 - total flux cleaned = 0.0193365 Jy ! Total flux subtracted in 100 components = 0.0193365 Jy ! Clean residual min=-0.003224 max=0.008291 Jy/beam ! Clean residual mean=-0.000002 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.059111 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.059111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066879Jy sigma=1.466103 ! Fit after self-cal, rms=0.065943Jy sigma=1.447089 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0090329 Jy ! Component: 100 - total flux cleaned = 0.0141176 Jy ! Total flux subtracted in 100 components = 0.0141176 Jy ! Clean residual min=-0.003062 max=0.006076 Jy/beam ! Clean residual mean=-0.000002 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.0732286 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 0.0732286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063756Jy sigma=1.392776 ! Fit after self-cal, rms=0.063208Jy sigma=1.382163 ! Inverting map ! Added new window around map position (3.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00773166 Jy ! Component: 100 - total flux cleaned = 0.0124791 Jy ! Total flux subtracted in 100 components = 0.0124791 Jy ! Clean residual min=-0.002941 max=0.005425 Jy/beam ! Clean residual mean=-0.000002 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0857077 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.0857077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061504Jy sigma=1.340020 ! Fit after self-cal, rms=0.061090Jy sigma=1.330974 ! Inverting map ! Added new window around map position (5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664336 Jy ! Component: 100 - total flux cleaned = 0.0110114 Jy ! Total flux subtracted in 100 components = 0.0110114 Jy ! Clean residual min=-0.002752 max=0.004115 Jy/beam ! Clean residual mean=-0.000002 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0967191 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.0967191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059823Jy sigma=1.298112 ! Fit after self-cal, rms=0.059590Jy sigma=1.292665 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473241 Jy ! Component: 100 - total flux cleaned = 0.00805459 Jy ! Total flux subtracted in 100 components = 0.00805459 Jy ! Clean residual min=-0.002513 max=0.003717 Jy/beam ! Clean residual mean=-0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.104774 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.104774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058880Jy sigma=1.274084 ! Fit after self-cal, rms=0.058802Jy sigma=1.272055 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8412 mas, bmaj=1.998 mas, bpa=-1.302 degrees ! Estimated noise=0.153339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598046 Jy ! Component: 100 - total flux cleaned = 0.00976941 Jy ! Component: 150 - total flux cleaned = 0.0125353 Jy ! Component: 200 - total flux cleaned = 0.0146414 Jy ! Total flux subtracted in 200 components = 0.0146414 Jy ! Clean residual min=-0.001986 max=0.003841 Jy/beam ! Clean residual mean=0.000000 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.119415 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 74 components and 0.119415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058127Jy sigma=1.254288 ! Fit after self-cal, rms=0.058036Jy sigma=1.252071 ! Inverting map ! Added new window around map position (-1.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336215 Jy ! Component: 100 - total flux cleaned = 0.00573203 Jy ! Component: 150 - total flux cleaned = 0.00758714 Jy ! Component: 200 - total flux cleaned = 0.00909632 Jy ! Total flux subtracted in 200 components = 0.00909632 Jy ! Clean residual min=-0.001554 max=0.001892 Jy/beam ! Clean residual mean=-0.000000 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.128511 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.128511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057792Jy sigma=1.245494 ! Fit after self-cal, rms=0.057772Jy sigma=1.245101 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8412 x 1.998 at -1.302 degrees (North through East) ! Clean map min=-0.0015172 max=0.0425 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.92 KP 1.12 ! LA 0.94 MK 1.00 NL 1.20 OV 0.93 ! PT 0.96 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.93 KP 1.04 ! LA 0.91 MK 1.01 NL 1.14 OV 0.93 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.98 KP 0.99 ! LA 0.92 MK 1.09 NL 1.10 OV 0.95 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.02 KP 1.03 ! LA 0.97 MK 1.08 NL 1.16 OV 0.97 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.94 KP 1.02 ! LA 0.92 MK 1.04 NL 1.10 OV 0.95 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.99 KP 1.12 ! LA 0.89 MK 1.00 NL 1.11 OV 0.88 ! PT 0.99 SC 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.90 KP 1.04 ! LA 0.94 MK 1.01 NL 1.12 OV 0.94 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.96 KP 1.11 ! LA 0.94 MK 0.97 NL 1.18 OV 0.91 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.97 KP 1.03 ! LA 0.90 MK 1.02 NL 1.14 OV 0.94 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 0.93 KP 1.11 ! LA 0.93 MK 0.98 NL 1.16 OV 0.92 ! PT 0.92 SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.84 KP 1.06 ! LA 0.96 MK 1.04 NL 1.28 OV 0.96 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.94 KP 1.01 ! LA 0.94 MK 0.93 NL 1.21 OV 0.94 ! PT 0.95 SC 0.92 ! ! ! Fit before self-cal, rms=0.057772Jy sigma=1.245101 ! Fit after self-cal, rms=0.056293Jy sigma=1.239016 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.836 mas, bmaj=1.996 mas, bpa=-0.6058 degrees ! Estimated noise=0.15117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412655 Jy ! Component: 100 - total flux cleaned = 0.000369853 Jy ! Component: 150 - total flux cleaned = 0.000333962 Jy ! Component: 200 - total flux cleaned = 0.000334312 Jy ! Total flux subtracted in 200 components = 0.000334312 Jy ! Clean residual min=-0.000949 max=0.001541 Jy/beam ! Clean residual mean=-0.000003 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.128846 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.128846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056222Jy sigma=1.237533 ! Fit after self-cal, rms=0.056255Jy sigma=1.237077 ! Inverting map ! Added new window around map position (6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721769 Jy ! Component: 100 - total flux cleaned = 0.000799896 Jy ! Component: 150 - total flux cleaned = 0.000672539 Jy ! Component: 200 - total flux cleaned = 0.000615263 Jy ! Total flux subtracted in 200 components = 0.000615263 Jy ! Clean residual min=-0.000894 max=0.001011 Jy/beam ! Clean residual mean=-0.000003 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.129461 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.129461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056206Jy sigma=1.236013 ! Fit after self-cal, rms=0.056202Jy sigma=1.235912 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056202Jy sigma=1.235912 ! Fit after self-cal, rms=0.055799Jy sigma=1.233815 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8308 mas, bmaj=1.991 mas, bpa=-0.503 degrees ! Estimated noise=0.150137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463383 Jy ! Component: 100 - total flux cleaned = 0.000602773 Jy ! Component: 150 - total flux cleaned = 0.000625798 Jy ! Component: 200 - total flux cleaned = 0.000625362 Jy ! Total flux subtracted in 200 components = 0.000625362 Jy ! Clean residual min=-0.000818 max=0.000757 Jy/beam ! Clean residual mean=-0.000002 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.130086 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.130086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055775Jy sigma=1.233315 ! Fit after self-cal, rms=0.055786Jy sigma=1.233187 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.70699e-05 Jy ! Component: 100 - total flux cleaned = 9.55782e-05 Jy ! Component: 150 - total flux cleaned = 5.70541e-05 Jy ! Component: 200 - total flux cleaned = 4.87268e-06 Jy ! Total flux subtracted in 200 components = 4.87268e-06 Jy ! Clean residual min=-0.000820 max=0.000735 Jy/beam ! Clean residual mean=-0.000002 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.130091 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 137 components and 0.130091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055773Jy sigma=1.232910 ! Fit after self-cal, rms=0.055772Jy sigma=1.232891 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055772Jy sigma=1.232891 ! Fit after self-cal, rms=0.055691Jy sigma=1.232302 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8297 mas, bmaj=1.99 mas, bpa=-0.4362 degrees ! Estimated noise=0.149795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473983 Jy ! Component: 100 - total flux cleaned = 0.00051147 Jy ! Component: 150 - total flux cleaned = 0.000545603 Jy ! Component: 200 - total flux cleaned = 0.000576741 Jy ! Total flux subtracted in 200 components = 0.000576741 Jy ! Clean residual min=-0.000790 max=0.000736 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.130668 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 142 components and 0.130668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055680Jy sigma=1.232071 ! Fit after self-cal, rms=0.055688Jy sigma=1.232010 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.2724e-05 Jy ! Component: 100 - total flux cleaned = 1.85083e-05 Jy ! Component: 150 - total flux cleaned = -8.91318e-06 Jy ! Component: 200 - total flux cleaned = -3.46507e-05 Jy ! Total flux subtracted in 200 components = -3.46507e-05 Jy ! Clean residual min=-0.000788 max=0.000717 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.130633 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 150 components and 0.130633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055681Jy sigma=1.231874 ! Fit after self-cal, rms=0.055681Jy sigma=1.231860 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055681Jy sigma=1.231860 ! Fit after self-cal, rms=0.055596Jy sigma=1.231821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.094 mas, bmaj=3.558 mas, bpa=3.86 degrees ! Estimated noise=0.198256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337785 Jy ! Component: 100 - total flux cleaned = 0.000392906 Jy ! Component: 150 - total flux cleaned = 0.000404571 Jy ! Component: 200 - total flux cleaned = 0.000415215 Jy ! Total flux subtracted in 200 components = 0.000415215 Jy ! Clean residual min=-0.000711 max=0.000643 Jy/beam ! Clean residual mean=-0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.131049 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 168 components and 0.131049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055593Jy sigma=1.231747 ! Fit after self-cal, rms=0.055596Jy sigma=1.231725 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.54205e-06 Jy ! Component: 100 - total flux cleaned = 2.6144e-05 Jy ! Component: 150 - total flux cleaned = 1.683e-05 Jy ! Component: 200 - total flux cleaned = 5.80432e-07 Jy ! Total flux subtracted in 200 components = 5.80432e-07 Jy ! Clean residual min=-0.000682 max=0.000623 Jy/beam ! Clean residual mean=-0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.131049 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 175 components and 0.131049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055594Jy sigma=1.231704 ! Fit after self-cal, rms=0.055594Jy sigma=1.231693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.829 mas, bmaj=1.99 mas, bpa=-0.4082 degrees ! Estimated noise=0.149624 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.829 x 1.99 at -0.4082 degrees (North through East) ! Clean map min=-0.00097615 max=0.041525 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6458 mas, bmaj=1.675 mas, bpa=-1.069 degrees ! Estimated noise=0.290971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342047 Jy ! Component: 100 - total flux cleaned = 0.0518072 Jy ! Component: 150 - total flux cleaned = 0.0638005 Jy ! Component: 200 - total flux cleaned = 0.0730495 Jy ! Total flux subtracted in 200 components = 0.0730495 Jy ! Clean residual min=-0.003103 max=0.005737 Jy/beam ! Clean residual mean=-0.000003 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.0730495 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0730495 Jy ! Inverting map and beam ! Estimated beam: bmin=0.829 mas, bmaj=1.99 mas, bpa=-0.4082 degrees ! Estimated noise=0.149624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133064 Jy ! Component: 100 - total flux cleaned = 0.0228672 Jy ! Component: 150 - total flux cleaned = 0.0300739 Jy ! Component: 200 - total flux cleaned = 0.0355681 Jy ! Total flux subtracted in 200 components = 0.0355681 Jy ! Clean residual min=-0.001916 max=0.003191 Jy/beam ! Clean residual mean=0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.108618 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 46 components and 0.108618 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423663 Jy ! Component: 100 - total flux cleaned = 0.00756337 Jy ! Component: 150 - total flux cleaned = 0.010206 Jy ! Component: 200 - total flux cleaned = 0.0123243 Jy ! Total flux subtracted in 200 components = 0.0123243 Jy ! Clean residual min=-0.001232 max=0.001264 Jy/beam ! Clean residual mean=0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.120942 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 86 components and 0.120942 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171727 Jy ! Component: 100 - total flux cleaned = 0.00313164 Jy ! Component: 150 - total flux cleaned = 0.00432133 Jy ! Component: 200 - total flux cleaned = 0.00533009 Jy ! Total flux subtracted in 200 components = 0.00533009 Jy ! Clean residual min=-0.000902 max=0.000803 Jy/beam ! Clean residual mean=0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.126272 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 114 components and 0.126272 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.094 mas, bmaj=3.558 mas, bpa=3.86 degrees ! Estimated noise=0.198256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015279 Jy ! Component: 100 - total flux cleaned = 0.0025279 Jy ! Component: 150 - total flux cleaned = 0.00316207 Jy ! Component: 200 - total flux cleaned = 0.00350129 Jy ! Total flux subtracted in 200 components = 0.00350129 Jy ! Clean residual min=-0.000729 max=0.000716 Jy/beam ! Clean residual mean=-0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.129773 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296308 Jy ! Component: 100 - total flux cleaned = 0.000525571 Jy ! Component: 150 - total flux cleaned = 0.00068069 Jy ! Component: 200 - total flux cleaned = 0.000748636 Jy ! Total flux subtracted in 200 components = 0.000748636 Jy ! Clean residual min=-0.000658 max=0.000631 Jy/beam ! Clean residual mean=-0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.130522 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 165 components and 0.130522 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.829 mas, bmaj=1.99 mas, bpa=-0.4082 degrees ! Estimated noise=0.149624 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.16114e-05 Jy ! Component: 100 - total flux cleaned = 7.21291e-05 Jy ! Component: 150 - total flux cleaned = 0.000165408 Jy ! Component: 200 - total flux cleaned = 0.000220699 Jy ! Total flux subtracted in 200 components = 0.000220699 Jy ! Clean residual min=-0.000750 max=0.000665 Jy/beam ! Clean residual mean=-0.000000 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.130743 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 183 components and 0.130743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055592Jy sigma=1.231656 ! Fit after self-cal, rms=0.055585Jy sigma=1.231494 wmodel J0910-0526_X_map.mod ! Writing 183 model components to file: J0910-0526_X_map.mod wobs J0910-0526_X_uvs.fits ! Writing UV FITS file: J0910-0526_X_uvs.fits wwins J0910-0526_X_map.win ! wwins: Wrote 7 windows to J0910-0526_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219708 Jy ! Component: 100 - total flux cleaned = -0.000208288 Jy ! Component: 150 - total flux cleaned = -0.000220174 Jy ! Component: 200 - total flux cleaned = -0.000196823 Jy ! Component: 250 - total flux cleaned = -0.000185368 Jy ! Component: 300 - total flux cleaned = -0.000207266 Jy ! Component: 350 - total flux cleaned = -0.000250433 Jy ! Component: 400 - total flux cleaned = -0.000292858 Jy ! Component: 450 - total flux cleaned = -0.000334691 Jy ! Component: 500 - total flux cleaned = -0.000406354 Jy ! Component: 550 - total flux cleaned = -0.000406074 Jy ! Component: 600 - total flux cleaned = -0.00039616 Jy ! Component: 650 - total flux cleaned = -0.000445695 Jy ! Component: 700 - total flux cleaned = -0.000503999 Jy ! Component: 750 - total flux cleaned = -0.000532699 Jy ! Component: 800 - total flux cleaned = -0.000561305 Jy ! Component: 850 - total flux cleaned = -0.000608433 Jy ! Component: 900 - total flux cleaned = -0.000655026 Jy ! Component: 950 - total flux cleaned = -0.000673518 Jy ! Component: 1000 - total flux cleaned = -0.000701197 Jy ! Component: 1050 - total flux cleaned = -0.000782566 Jy ! Component: 1100 - total flux cleaned = -0.000809491 Jy ! Component: 1150 - total flux cleaned = -0.000844747 Jy ! Component: 1200 - total flux cleaned = -0.000871226 Jy ! Component: 1250 - total flux cleaned = -0.000923534 Jy ! Component: 1300 - total flux cleaned = -0.000949531 Jy ! Component: 1350 - total flux cleaned = -0.000975331 Jy ! Component: 1400 - total flux cleaned = -0.00100932 Jy ! Component: 1450 - total flux cleaned = -0.00105994 Jy ! Component: 1500 - total flux cleaned = -0.00104313 Jy ! Component: 1550 - total flux cleaned = -0.00112615 Jy ! Component: 1600 - total flux cleaned = -0.0011507 Jy ! Component: 1650 - total flux cleaned = -0.00114246 Jy ! Component: 1700 - total flux cleaned = -0.00115067 Jy ! Component: 1750 - total flux cleaned = -0.00119086 Jy ! Component: 1800 - total flux cleaned = -0.00118282 Jy ! Component: 1850 - total flux cleaned = -0.00120654 Jy ! Component: 1900 - total flux cleaned = -0.00117495 Jy ! Component: 1950 - total flux cleaned = -0.00118276 Jy ! Component: 2000 - total flux cleaned = -0.00118283 Jy ! Component: 2050 - total flux cleaned = -0.00118297 Jy ! Component: 2100 - total flux cleaned = -0.00118305 Jy ! Component: 2150 - total flux cleaned = -0.00117546 Jy ! Component: 2200 - total flux cleaned = -0.00119825 Jy ! Component: 2250 - total flux cleaned = -0.00122079 Jy ! Component: 2300 - total flux cleaned = -0.00119833 Jy ! Component: 2350 - total flux cleaned = -0.00123556 Jy ! Component: 2400 - total flux cleaned = -0.00122814 Jy ! Component: 2450 - total flux cleaned = -0.0012281 Jy ! Component: 2500 - total flux cleaned = -0.00119885 Jy ! Component: 2550 - total flux cleaned = -0.00122067 Jy ! Component: 2600 - total flux cleaned = -0.0011918 Jy ! Component: 2650 - total flux cleaned = -0.00122774 Jy ! Component: 2700 - total flux cleaned = -0.00122061 Jy ! Component: 2750 - total flux cleaned = -0.0012704 Jy ! Component: 2800 - total flux cleaned = -0.0012704 Jy ! Component: 2850 - total flux cleaned = -0.0012774 Jy ! Component: 2900 - total flux cleaned = -0.0012705 Jy ! Component: 2950 - total flux cleaned = -0.00128438 Jy ! Component: 3000 - total flux cleaned = -0.00128437 Jy ! Component: 3050 - total flux cleaned = -0.00127747 Jy ! Component: 3100 - total flux cleaned = -0.00127071 Jy ! Component: 3150 - total flux cleaned = -0.00125705 Jy ! Component: 3200 - total flux cleaned = -0.0012503 Jy ! Component: 3250 - total flux cleaned = -0.00127049 Jy ! Component: 3300 - total flux cleaned = -0.00124366 Jy ! Component: 3350 - total flux cleaned = -0.00124367 Jy ! Component: 3400 - total flux cleaned = -0.00126358 Jy ! Component: 3450 - total flux cleaned = -0.0012768 Jy ! Component: 3500 - total flux cleaned = -0.00125706 Jy ! Component: 3550 - total flux cleaned = -0.00125703 Jy ! Component: 3600 - total flux cleaned = -0.00123099 Jy ! Component: 3650 - total flux cleaned = -0.00119865 Jy ! Component: 3700 - total flux cleaned = -0.00120507 Jy ! Component: 3750 - total flux cleaned = -0.00121791 Jy ! Component: 3800 - total flux cleaned = -0.00121156 Jy ! Component: 3850 - total flux cleaned = -0.00117341 Jy ! Component: 3900 - total flux cleaned = -0.00117975 Jy ! Component: 3950 - total flux cleaned = -0.00121126 Jy ! Component: 4000 - total flux cleaned = -0.00117368 Jy ! Component: 4050 - total flux cleaned = -0.0011549 Jy ! Total flux subtracted in 4096 components = -0.00116115 Jy ! Clean residual min=-0.000388 max=0.000361 Jy/beam ! Clean residual mean=-0.000000 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.129581 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 498 components and 0.129582 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0910-0526_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.829 x 1.99 at -0.4082 degrees (North through East) ! Clean map min=-0.00054103 max=0.041921 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0910-0526_X_map.fits wmodel /vlbi/uf001/uva//J0910-0526_X_map.mod ! Writing 498 model components to file: /vlbi/uf001/uva//J0910-0526_X_map.mod wobs /vlbi/uf001/uva//J0910-0526_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0910-0526_X_uvs.fits wwins /vlbi/uf001/uva//J0910-0526_X_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uva//J0910-0526_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0419205 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000107744 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.771062 0.771062 1.54212 3.08425 6.1685 12.337 24.674 49.348 98.696 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.041 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 389.073 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0910-0526_X_dfm.log closed on Mon Jan 14 00:18:39 2019