! Started logfile: /vlbi/uf001/uvm//J0904-3514_X_a_dfm.log on Sun Jan 13 21:12:10 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0904-3514_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0904-3514_X_a_uvm.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! AN table 2: 29 integrations on 21 of 21 possible baselines. ! AN table 3: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.851354 visibilities/baseline/integration-bin. ! Found source: J0904-3514 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 44880 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0904-3514_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.046395Jy sigma=17.485526 ! Fit after self-cal, rms=0.735744Jy sigma=11.721802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5913 mas, bmaj=1.766 mas, bpa=-12.07 degrees ! Estimated noise=0.472165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214882 Jy ! Component: 100 - total flux cleaned = 0.265524 Jy ! Total flux subtracted in 100 components = 0.265524 Jy ! Clean residual min=-0.013343 max=0.036543 Jy/beam ! Clean residual mean=-0.000029 rms=0.003416 Jy/beam ! Combined flux in latest and established models = 0.265525 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.265525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120658Jy sigma=1.811798 ! Fit after self-cal, rms=0.120644Jy sigma=1.811682 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032324 Jy ! Component: 100 - total flux cleaned = 0.0392816 Jy ! Total flux subtracted in 100 components = 0.0392816 Jy ! Clean residual min=-0.013025 max=0.033822 Jy/beam ! Clean residual mean=-0.000028 rms=0.002838 Jy/beam ! Combined flux in latest and established models = 0.304806 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.304806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111211Jy sigma=1.614649 ! Fit after self-cal, rms=0.110304Jy sigma=1.589194 ! Inverting map ! Added new window around map position (1.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226523 Jy ! Component: 100 - total flux cleaned = 0.0311624 Jy ! Total flux subtracted in 100 components = 0.0311624 Jy ! Clean residual min=-0.012282 max=0.017713 Jy/beam ! Clean residual mean=-0.000027 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.335968 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.335968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103680Jy sigma=1.481799 ! Fit after self-cal, rms=0.103575Jy sigma=1.480264 ! Inverting map ! Added new window around map position (-13, 29.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126946 Jy ! Component: 100 - total flux cleaned = 0.0162986 Jy ! Total flux subtracted in 100 components = 0.0162986 Jy ! Clean residual min=-0.010990 max=0.015285 Jy/beam ! Clean residual mean=-0.000023 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 0.352267 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.352267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101095Jy sigma=1.431585 ! Fit after self-cal, rms=0.100923Jy sigma=1.429053 ! Inverting map ! Added new window around map position (13, -29.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106723 Jy ! Component: 100 - total flux cleaned = 0.0128027 Jy ! Total flux subtracted in 100 components = 0.0128027 Jy ! Clean residual min=-0.011035 max=0.011662 Jy/beam ! Clean residual mean=-0.000019 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 0.36507 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.36507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099560Jy sigma=1.399676 ! Fit after self-cal, rms=0.099481Jy sigma=1.398615 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8309 mas, bmaj=2.378 mas, bpa=-12.2 degrees ! Estimated noise=0.208594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824869 Jy ! Component: 100 - total flux cleaned = 0.013497 Jy ! Component: 150 - total flux cleaned = 0.0147944 Jy ! Component: 200 - total flux cleaned = 0.015088 Jy ! Total flux subtracted in 200 components = 0.015088 Jy ! Clean residual min=-0.009723 max=0.010386 Jy/beam ! Clean residual mean=-0.000026 rms=0.002206 Jy/beam ! Combined flux in latest and established models = 0.380158 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 0.380158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098517Jy sigma=1.383473 ! Fit after self-cal, rms=0.098477Jy sigma=1.383005 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8309 x 2.378 at -12.2 degrees (North through East) ! Clean map min=-0.008973 max=0.2632 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.96 HN 1.35 KP 0.94 ! LA 0.99 MK 0.96 NL 1.08 OV 0.87 ! PT 0.92 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.21 KP 1.03 LA 1.06 ! MK 1.21 NL 1.11 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.05 HN 1.35 KP 1.09 ! LA 1.07 MK 1.01 NL 1.03 OV 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 1.33 KP 0.95 ! LA 0.98 MK 0.97 NL 1.10 OV 0.88 ! PT 0.92 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.24 KP 1.01 LA 1.09 ! MK 1.27 NL 1.05 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.05 HN 1.34 KP 1.08 ! LA 1.06 MK 1.02 NL 1.02 OV 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 1.30 KP 0.95 ! LA 0.98 MK 0.98 NL 1.10 OV 0.87 ! PT 0.92 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.33 KP 1.00 LA 1.05 ! MK 1.23 NL 1.10 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.06 HN 1.29 KP 1.07 ! LA 1.08 MK 1.02 NL 1.05 OV 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.23 KP 0.95 ! LA 0.98 MK 0.96 NL 1.11 OV 0.88 ! PT 0.90 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.21 KP 1.01 LA 1.06 ! MK 1.19 NL 1.08 PT 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.07 HN 1.33 KP 1.11 ! LA 1.08 MK 1.02 NL 0.98 OV 0.90 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 1.31 KP 0.96 ! LA 0.98 MK 0.97 NL 1.10 OV 0.88 ! PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.27 KP 1.01 LA 1.08 ! MK 1.21 NL 1.09 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.06 HN 1.37 KP 1.10 ! LA 1.06 MK 1.02 NL 0.98 OV 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 1.26 KP 0.96 ! LA 0.98 MK 0.97 NL 1.09 OV 0.87 ! PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.22 KP 1.03 LA 1.07 ! MK 1.25 NL 1.09 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.07 HN 1.40 KP 1.11 ! LA 1.05 MK 1.00 NL 1.02 OV 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.24 KP 0.96 ! LA 0.98 MK 0.98 NL 1.09 OV 0.87 ! PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.15 KP 1.02 LA 1.06 ! MK 1.23 NL 1.12 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.06 HN 1.45 KP 1.10 ! LA 1.06 MK 1.00 NL 1.01 OV 0.91 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 1.35 KP 0.95 ! LA 0.98 MK 0.97 NL 1.07 OV 0.87 ! PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.17 KP 1.00 LA 1.07 ! MK 1.22 NL 1.11 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.06 HN 1.35 KP 1.13 ! LA 1.05 MK 0.98 NL 0.98 OV 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 1.28 KP 0.96 ! LA 0.97 MK 0.97 NL 1.07 OV 0.86 ! PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.31 KP 1.03 LA 1.07 ! MK 1.17 NL 1.06 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.07 HN 1.38 KP 1.12 ! LA 1.05 MK 1.01 NL 0.97 OV 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 1.36 KP 0.95 ! LA 0.97 MK 0.96 NL 1.08 OV 0.87 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.19 KP 1.01 LA 1.06 ! MK 1.20 NL 1.13 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.07 HN 1.44 KP 1.13 ! LA 1.07 MK 1.01 NL 0.96 OV 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.95 HN 1.34 KP 0.96 ! LA 0.97 MK 0.95 NL 1.05 OV 0.86 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.23 KP 1.02 LA 1.06 ! MK 1.14 NL 1.08 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.07 HN 1.37 KP 1.11 ! LA 1.07 MK 0.98 NL 0.97 OV 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 1.37 KP 0.95 ! LA 0.98 MK 0.95 NL 1.03 OV 0.88 ! PT 0.90 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.11 KP 0.99 LA 1.08 ! MK 1.06 NL 1.09 PT 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.04 HN 1.46 KP 1.09 ! LA 1.10 MK 0.99 NL 0.97 OV 0.92 ! ! ! Fit before self-cal, rms=0.098477Jy sigma=1.383005 ! Fit after self-cal, rms=0.105989Jy sigma=1.237907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8397 mas, bmaj=2.351 mas, bpa=-11.53 degrees ! Estimated noise=0.214466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00670407 Jy ! Component: 100 - total flux cleaned = -0.00903324 Jy ! Component: 150 - total flux cleaned = -0.0105906 Jy ! Component: 200 - total flux cleaned = -0.01192 Jy ! Total flux subtracted in 200 components = -0.01192 Jy ! Clean residual min=-0.006075 max=0.005752 Jy/beam ! Clean residual mean=-0.000001 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.368238 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.368238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105052Jy sigma=1.219492 ! Fit after self-cal, rms=0.105274Jy sigma=1.218827 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105274Jy sigma=1.218827 ! Fit after self-cal, rms=0.114110Jy sigma=1.188908 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8443 mas, bmaj=2.357 mas, bpa=-11.64 degrees ! Estimated noise=0.215871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00540623 Jy ! Component: 100 - total flux cleaned = -0.00729364 Jy ! Component: 150 - total flux cleaned = -0.00778949 Jy ! Component: 200 - total flux cleaned = -0.00792829 Jy ! Total flux subtracted in 200 components = -0.00792829 Jy ! Clean residual min=-0.005009 max=0.004510 Jy/beam ! Clean residual mean=0.000002 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.360309 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.360309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113486Jy sigma=1.177059 ! Fit after self-cal, rms=0.113564Jy sigma=1.176812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.41352e-05 Jy ! Component: 100 - total flux cleaned = -9.67973e-05 Jy ! Component: 150 - total flux cleaned = -9.32074e-05 Jy ! Component: 200 - total flux cleaned = 9.68514e-05 Jy ! Total flux subtracted in 200 components = 9.68514e-05 Jy ! Clean residual min=-0.004802 max=0.004136 Jy/beam ! Clean residual mean=0.000001 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.360406 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.360406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113349Jy sigma=1.172968 ! Fit after self-cal, rms=0.113348Jy sigma=1.172859 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113348Jy sigma=1.172859 ! Fit after self-cal, rms=0.123025Jy sigma=1.164502 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8472 mas, bmaj=2.363 mas, bpa=-11.71 degrees ! Estimated noise=0.216003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00432081 Jy ! Component: 100 - total flux cleaned = -0.00516353 Jy ! Component: 150 - total flux cleaned = -0.00526186 Jy ! Component: 200 - total flux cleaned = -0.00525774 Jy ! Total flux subtracted in 200 components = -0.00525774 Jy ! Clean residual min=-0.004640 max=0.003425 Jy/beam ! Clean residual mean=0.000001 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.355149 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.355149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122712Jy sigma=1.159751 ! Fit after self-cal, rms=0.122782Jy sigma=1.159658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127832 Jy ! Component: 100 - total flux cleaned = -4.44321e-05 Jy ! Component: 150 - total flux cleaned = 2.82848e-05 Jy ! Component: 200 - total flux cleaned = 9.49262e-05 Jy ! Total flux subtracted in 200 components = 9.49262e-05 Jy ! Clean residual min=-0.004541 max=0.002998 Jy/beam ! Clean residual mean=0.000000 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.355243 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.355243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122648Jy sigma=1.158006 ! Fit after self-cal, rms=0.122651Jy sigma=1.157959 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122651Jy sigma=1.157959 ! Fit after self-cal, rms=0.126320Jy sigma=1.156271 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=7.445 mas, bpa=-4.992 degrees ! Estimated noise=0.255067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00294487 Jy ! Component: 100 - total flux cleaned = -0.00453071 Jy ! Component: 150 - total flux cleaned = -0.00484115 Jy ! Component: 200 - total flux cleaned = -0.00511028 Jy ! Total flux subtracted in 200 components = -0.00511028 Jy ! Clean residual min=-0.005294 max=0.002960 Jy/beam ! Clean residual mean=0.000001 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.350133 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 100 components and 0.350133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126203Jy sigma=1.154390 ! Fit after self-cal, rms=0.126230Jy sigma=1.154314 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.77346e-05 Jy ! Component: 100 - total flux cleaned = -0.00012526 Jy ! Component: 150 - total flux cleaned = -0.000127076 Jy ! Component: 200 - total flux cleaned = -0.000126707 Jy ! Total flux subtracted in 200 components = -0.000126707 Jy ! Clean residual min=-0.005242 max=0.002947 Jy/beam ! Clean residual mean=0.000001 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.350006 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 106 components and 0.350006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126200Jy sigma=1.153986 ! Fit after self-cal, rms=0.126205Jy sigma=1.153960 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.362 mas, bpa=-11.66 degrees ! Estimated noise=0.216062 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8488 x 2.362 at -11.66 degrees (North through East) ! Clean map min=-0.0040788 max=0.27618 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5982 mas, bmaj=1.728 mas, bpa=-11.04 degrees ! Estimated noise=0.497541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22624 Jy ! Component: 100 - total flux cleaned = 0.276936 Jy ! Component: 150 - total flux cleaned = 0.299038 Jy ! Component: 200 - total flux cleaned = 0.313207 Jy ! Total flux subtracted in 200 components = 0.313207 Jy ! Clean residual min=-0.005760 max=0.009644 Jy/beam ! Clean residual mean=-0.000003 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.313207 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.313207 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.362 mas, bpa=-11.66 degrees ! Estimated noise=0.216062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131348 Jy ! Component: 100 - total flux cleaned = 0.0212599 Jy ! Component: 150 - total flux cleaned = 0.0267844 Jy ! Component: 200 - total flux cleaned = 0.0306805 Jy ! Total flux subtracted in 200 components = 0.0306805 Jy ! Clean residual min=-0.004081 max=0.003252 Jy/beam ! Clean residual mean=-0.000004 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.343887 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 37 components and 0.343887 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=7.445 mas, bpa=-4.992 degrees ! Estimated noise=0.255067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325929 Jy ! Component: 100 - total flux cleaned = 0.00519489 Jy ! Component: 150 - total flux cleaned = 0.00641273 Jy ! Component: 200 - total flux cleaned = 0.00683044 Jy ! Total flux subtracted in 200 components = 0.00683044 Jy ! Clean residual min=-0.005239 max=0.003219 Jy/beam ! Clean residual mean=0.000000 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.350718 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118791 Jy ! Component: 100 - total flux cleaned = 0.000198421 Jy ! Component: 150 - total flux cleaned = 0.00029769 Jy ! Component: 200 - total flux cleaned = 0.00034251 Jy ! Total flux subtracted in 200 components = 0.00034251 Jy ! Clean residual min=-0.005233 max=0.003196 Jy/beam ! Clean residual mean=0.000001 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.35106 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.35106 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.362 mas, bpa=-11.66 degrees ! Estimated noise=0.216062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00030357 Jy ! Component: 100 - total flux cleaned = -0.000240316 Jy ! Component: 150 - total flux cleaned = -0.000183199 Jy ! Component: 200 - total flux cleaned = -0.00013022 Jy ! Total flux subtracted in 200 components = -0.00013022 Jy ! Clean residual min=-0.004118 max=0.002923 Jy/beam ! Clean residual mean=0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.35093 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.35093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126161Jy sigma=1.154388 ! Fit after self-cal, rms=0.126140Jy sigma=1.153991 wmodel J0904-3514_X_a_map.mod ! Writing 80 model components to file: J0904-3514_X_a_map.mod wobs J0904-3514_X_a_uvs.fits ! Writing UV FITS file: J0904-3514_X_a_uvs.fits wwins J0904-3514_X_a_map.win ! wwins: Wrote 6 windows to J0904-3514_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180332 Jy ! Component: 100 - total flux cleaned = -0.00332712 Jy ! Component: 150 - total flux cleaned = -0.00441159 Jy ! Component: 200 - total flux cleaned = -0.00484907 Jy ! Component: 250 - total flux cleaned = -0.00484941 Jy ! Component: 300 - total flux cleaned = -0.00489307 Jy ! Component: 350 - total flux cleaned = -0.00493315 Jy ! Component: 400 - total flux cleaned = -0.00489333 Jy ! Component: 450 - total flux cleaned = -0.00489266 Jy ! Component: 500 - total flux cleaned = -0.00489273 Jy ! Component: 550 - total flux cleaned = -0.00500068 Jy ! Component: 600 - total flux cleaned = -0.00510495 Jy ! Component: 650 - total flux cleaned = -0.00520722 Jy ! Component: 700 - total flux cleaned = -0.00540865 Jy ! Component: 750 - total flux cleaned = -0.00557298 Jy ! Component: 800 - total flux cleaned = -0.00579879 Jy ! Component: 850 - total flux cleaned = -0.00601981 Jy ! Component: 900 - total flux cleaned = -0.00617538 Jy ! Component: 950 - total flux cleaned = -0.00642007 Jy ! Component: 1000 - total flux cleaned = -0.00666009 Jy ! Component: 1050 - total flux cleaned = -0.00689649 Jy ! Component: 1100 - total flux cleaned = -0.00704182 Jy ! Component: 1150 - total flux cleaned = -0.00724198 Jy ! Component: 1200 - total flux cleaned = -0.00735451 Jy ! Component: 1250 - total flux cleaned = -0.00752114 Jy ! Component: 1300 - total flux cleaned = -0.00763034 Jy ! Component: 1350 - total flux cleaned = -0.00779229 Jy ! Component: 1400 - total flux cleaned = -0.00784549 Jy ! Component: 1450 - total flux cleaned = -0.00797687 Jy ! Component: 1500 - total flux cleaned = -0.00813268 Jy ! Component: 1550 - total flux cleaned = -0.0082349 Jy ! Component: 1600 - total flux cleaned = -0.00838676 Jy ! Component: 1650 - total flux cleaned = -0.00851163 Jy ! Component: 1700 - total flux cleaned = -0.00856106 Jy ! Component: 1750 - total flux cleaned = -0.00865849 Jy ! Component: 1800 - total flux cleaned = -0.00873112 Jy ! Component: 1850 - total flux cleaned = -0.00877902 Jy ! Component: 1900 - total flux cleaned = -0.00882624 Jy ! Component: 1950 - total flux cleaned = -0.00877948 Jy ! Component: 2000 - total flux cleaned = -0.00887212 Jy ! Component: 2050 - total flux cleaned = -0.00889476 Jy ! Component: 2100 - total flux cleaned = -0.00898528 Jy ! Component: 2150 - total flux cleaned = -0.009097 Jy ! Component: 2200 - total flux cleaned = -0.00909694 Jy ! Component: 2250 - total flux cleaned = -0.00909688 Jy ! Component: 2300 - total flux cleaned = -0.00918402 Jy ! Component: 2350 - total flux cleaned = -0.00922722 Jy ! Component: 2400 - total flux cleaned = -0.00929107 Jy ! Component: 2450 - total flux cleaned = -0.00933339 Jy ! Component: 2500 - total flux cleaned = -0.00933342 Jy ! Component: 2550 - total flux cleaned = -0.00937502 Jy ! Component: 2600 - total flux cleaned = -0.0094163 Jy ! Component: 2650 - total flux cleaned = -0.00943673 Jy ! Component: 2700 - total flux cleaned = -0.00947745 Jy ! Component: 2750 - total flux cleaned = -0.00949767 Jy ! Component: 2800 - total flux cleaned = -0.00955773 Jy ! Component: 2850 - total flux cleaned = -0.00949839 Jy ! Component: 2900 - total flux cleaned = -0.00955783 Jy ! Component: 2950 - total flux cleaned = -0.00955791 Jy ! Component: 3000 - total flux cleaned = -0.00955792 Jy ! Component: 3050 - total flux cleaned = -0.00963502 Jy ! Component: 3100 - total flux cleaned = -0.00974981 Jy ! Component: 3150 - total flux cleaned = -0.00967366 Jy ! Component: 3200 - total flux cleaned = -0.00967372 Jy ! Component: 3250 - total flux cleaned = -0.00972997 Jy ! Component: 3300 - total flux cleaned = -0.00972998 Jy ! Component: 3350 - total flux cleaned = -0.00980376 Jy ! Component: 3400 - total flux cleaned = -0.00976693 Jy ! Component: 3450 - total flux cleaned = -0.00980316 Jy ! Component: 3500 - total flux cleaned = -0.00985739 Jy ! Component: 3550 - total flux cleaned = -0.00989341 Jy ! Component: 3600 - total flux cleaned = -0.00983993 Jy ! Component: 3650 - total flux cleaned = -0.00991081 Jy ! Component: 3700 - total flux cleaned = -0.00994598 Jy ! Component: 3750 - total flux cleaned = -0.00999852 Jy ! Component: 3800 - total flux cleaned = -0.0100159 Jy ! Component: 3850 - total flux cleaned = -0.0100333 Jy ! Component: 3900 - total flux cleaned = -0.0100504 Jy ! Component: 3950 - total flux cleaned = -0.0101017 Jy ! Component: 4000 - total flux cleaned = -0.0100846 Jy ! Component: 4050 - total flux cleaned = -0.0100848 Jy ! Total flux subtracted in 4096 components = -0.0100344 Jy ! Clean residual min=-0.000919 max=0.000857 Jy/beam ! Clean residual mean=-0.000000 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.340896 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 414 components and 0.340895 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0904-3514_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8488 x 2.362 at -11.66 degrees (North through East) ! Clean map min=-0.0030551 max=0.2818 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0904-3514_X_a_map.fits wmodel /vlbi/uf001/uvm//J0904-3514_X_a_map.mod ! Writing 414 model components to file: /vlbi/uf001/uvm//J0904-3514_X_a_map.mod wobs /vlbi/uf001/uvm//J0904-3514_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0904-3514_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0904-3514_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J0904-3514_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.281801 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00030537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.325091 0.325091 0.650183 1.30037 2.60073 5.20146 10.4029 20.8058 41.6117 83.2234 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.281 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 922.817 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0904-3514_X_a_dfm.log closed on Sun Jan 13 21:12:16 2019