! Started logfile: /vlbi/uf001/uva//J0853+6722_X_dfm.log on Mon Jan 14 00:09:35 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0853+6722_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0853+6722_X_uva.fits ! AN table 1: 57 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.727096 visibilities/baseline/integration-bin. ! Found source: J0853+6722 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 17904 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0853+6722_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004979Jy sigma=22.125549 ! Fit after self-cal, rms=0.949428Jy sigma=20.833455 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7286 mas, bmaj=0.9966 mas, bpa=88.98 degrees ! Estimated noise=0.555479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402998 Jy ! Component: 100 - total flux cleaned = 0.0514918 Jy ! Total flux subtracted in 100 components = 0.0514918 Jy ! Clean residual min=-0.007874 max=0.013112 Jy/beam ! Clean residual mean=-0.000016 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.0514918 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0514918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082563Jy sigma=1.684919 ! Fit after self-cal, rms=0.080993Jy sigma=1.653144 ! Inverting map ! Added new window around map position (3, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115888 Jy ! Component: 100 - total flux cleaned = 0.0181246 Jy ! Total flux subtracted in 100 components = 0.0181246 Jy ! Clean residual min=-0.007241 max=0.010618 Jy/beam ! Clean residual mean=-0.000015 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.0696164 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.0696164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078849Jy sigma=1.598160 ! Fit after self-cal, rms=0.077824Jy sigma=1.579657 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105668 Jy ! Component: 100 - total flux cleaned = 0.0165481 Jy ! Total flux subtracted in 100 components = 0.0165481 Jy ! Clean residual min=-0.006345 max=0.007190 Jy/beam ! Clean residual mean=-0.000013 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.0861645 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.0861645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075834Jy sigma=1.530273 ! Fit after self-cal, rms=0.074729Jy sigma=1.507976 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00958539 Jy ! Component: 100 - total flux cleaned = 0.0148868 Jy ! Total flux subtracted in 100 components = 0.0148868 Jy ! Clean residual min=-0.005698 max=0.005254 Jy/beam ! Clean residual mean=-0.000010 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.101051 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.101051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072963Jy sigma=1.464119 ! Fit after self-cal, rms=0.072128Jy sigma=1.448136 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079628 Jy ! Component: 100 - total flux cleaned = 0.0121302 Jy ! Total flux subtracted in 100 components = 0.0121302 Jy ! Clean residual min=-0.004889 max=0.005178 Jy/beam ! Clean residual mean=-0.000008 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.113181 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.113181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070872Jy sigma=1.416522 ! Fit after self-cal, rms=0.070298Jy sigma=1.403746 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9527 mas, bmaj=1.207 mas, bpa=-88.95 degrees ! Estimated noise=0.256875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885276 Jy ! Component: 100 - total flux cleaned = 0.0133449 Jy ! Component: 150 - total flux cleaned = 0.0163666 Jy ! Component: 200 - total flux cleaned = 0.0179832 Jy ! Total flux subtracted in 200 components = 0.0179832 Jy ! Clean residual min=-0.003903 max=0.004529 Jy/beam ! Clean residual mean=-0.000029 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.131165 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 47 components and 0.131165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069239Jy sigma=1.375681 ! Fit after self-cal, rms=0.068770Jy sigma=1.363922 ! Inverting map ! Added new window around map position (2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458448 Jy ! Component: 100 - total flux cleaned = 0.00631257 Jy ! Component: 150 - total flux cleaned = 0.00783003 Jy ! Component: 200 - total flux cleaned = 0.00876167 Jy ! Total flux subtracted in 200 components = 0.00876167 Jy ! Clean residual min=-0.003305 max=0.004371 Jy/beam ! Clean residual mean=-0.000021 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.139926 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.139926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068328Jy sigma=1.352344 ! Fit after self-cal, rms=0.068177Jy sigma=1.349300 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9527 x 1.207 at -88.95 degrees (North through East) ! Clean map min=-0.0032937 max=0.051084 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.18 HN 0.87 LA 0.86 ! MK 0.97 NL 1.17 OV 1.04 PT 0.99 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.10 HN 0.95 LA 0.92 ! MK 0.96 NL 1.14 OV 1.00 PT 0.97 ! SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.17 HN 0.90 LA 0.84 ! MK 0.94 NL 1.16 OV 0.98 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.09 HN 0.91 LA 0.90 ! MK 1.06 NL 1.18 OV 1.05 PT 0.95 ! SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.86 LA 0.90 ! MK 1.04 NL 1.15 OV 1.01 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.17 HN 0.95 LA 0.83 ! MK 0.96 NL 1.18 OV 1.04 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.10 HN 0.95 LA 0.88 ! MK 0.92 NL 1.19 OV 1.00 PT 1.02 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.17 HN 0.96 LA 0.87 ! MK 1.05 NL 1.27 OV 1.03 PT 0.98 ! SC 0.93 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.09 HN 0.94 LA 0.95 ! MK 0.98 NL 1.25 OV 1.02 PT 0.95 ! SC 0.87 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 0.94 LA 0.89 ! MK 0.97 NL 1.11 OV 1.10 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 0.95 LA 0.88 ! MK 0.95 NL 1.24 OV 1.00 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.18 HN 0.92 LA 0.86 ! MK 1.01 NL 1.19 OV 1.07 PT 0.99 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.068177Jy sigma=1.349300 ! Fit after self-cal, rms=0.065068Jy sigma=1.332020 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9431 mas, bmaj=1.192 mas, bpa=-88.75 degrees ! Estimated noise=0.251561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443342 Jy ! Component: 100 - total flux cleaned = 0.000545985 Jy ! Component: 150 - total flux cleaned = 0.000339565 Jy ! Component: 200 - total flux cleaned = 8.18462e-05 Jy ! Total flux subtracted in 200 components = 8.18462e-05 Jy ! Clean residual min=-0.002464 max=0.002711 Jy/beam ! Clean residual mean=-0.000008 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.140008 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.140008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064911Jy sigma=1.328778 ! Fit after self-cal, rms=0.064961Jy sigma=1.326797 ! Inverting map ! Added new window around map position (-3.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223941 Jy ! Component: 100 - total flux cleaned = 0.00256341 Jy ! Component: 150 - total flux cleaned = 0.00246496 Jy ! Component: 200 - total flux cleaned = 0.0023769 Jy ! Total flux subtracted in 200 components = 0.0023769 Jy ! Clean residual min=-0.002177 max=0.002022 Jy/beam ! Clean residual mean=-0.000006 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.142385 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 0.142385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064840Jy sigma=1.323649 ! Fit after self-cal, rms=0.064829Jy sigma=1.323232 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064829Jy sigma=1.323232 ! Fit after self-cal, rms=0.066696Jy sigma=1.317227 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9381 mas, bmaj=1.185 mas, bpa=-87.67 degrees ! Estimated noise=0.24954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711338 Jy ! Component: 100 - total flux cleaned = 0.000845607 Jy ! Component: 150 - total flux cleaned = 0.000999511 Jy ! Component: 200 - total flux cleaned = 0.000965981 Jy ! Total flux subtracted in 200 components = 0.000965981 Jy ! Clean residual min=-0.001495 max=0.001506 Jy/beam ! Clean residual mean=0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.143351 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 114 components and 0.143351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066644Jy sigma=1.315936 ! Fit after self-cal, rms=0.066708Jy sigma=1.314667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272147 Jy ! Component: 100 - total flux cleaned = 0.000372986 Jy ! Component: 150 - total flux cleaned = 0.00037114 Jy ! Component: 200 - total flux cleaned = 0.000369913 Jy ! Total flux subtracted in 200 components = 0.000369913 Jy ! Clean residual min=-0.001369 max=0.001424 Jy/beam ! Clean residual mean=0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.143721 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 120 components and 0.143721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066680Jy sigma=1.313998 ! Fit after self-cal, rms=0.066690Jy sigma=1.313904 ! Inverting map ! Added new window around map position (-9, 9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000936618 Jy ! Component: 100 - total flux cleaned = 0.00108851 Jy ! Component: 150 - total flux cleaned = 0.0012218 Jy ! Component: 200 - total flux cleaned = 0.00126868 Jy ! Total flux subtracted in 200 components = 0.00126868 Jy ! Clean residual min=-0.001384 max=0.001318 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.14499 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 134 components and 0.144989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066658Jy sigma=1.313158 ! Fit after self-cal, rms=0.066656Jy sigma=1.313055 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066656Jy sigma=1.313055 ! Fit after self-cal, rms=0.066930Jy sigma=1.312885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9368 mas, bmaj=1.186 mas, bpa=-87.51 degrees ! Estimated noise=0.248987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180722 Jy ! Component: 100 - total flux cleaned = 0.000257202 Jy ! Component: 150 - total flux cleaned = 0.000236372 Jy ! Component: 200 - total flux cleaned = 0.000257761 Jy ! Total flux subtracted in 200 components = 0.000257761 Jy ! Clean residual min=-0.001357 max=0.001306 Jy/beam ! Clean residual mean=-0.000001 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.145247 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 137 components and 0.145247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066913Jy sigma=1.312509 ! Fit after self-cal, rms=0.066930Jy sigma=1.312459 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.14966e-05 Jy ! Component: 100 - total flux cleaned = 9.09622e-05 Jy ! Component: 150 - total flux cleaned = 9.09894e-05 Jy ! Component: 200 - total flux cleaned = 0.000108087 Jy ! Total flux subtracted in 200 components = 0.000108087 Jy ! Clean residual min=-0.001342 max=0.001288 Jy/beam ! Clean residual mean=-0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.145355 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 141 components and 0.145355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066919Jy sigma=1.312242 ! Fit after self-cal, rms=0.066920Jy sigma=1.312226 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066920Jy sigma=1.312226 ! Fit after self-cal, rms=0.066957Jy sigma=1.312198 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=2.259 mas, bpa=77.11 degrees ! Estimated noise=0.335628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13601e-05 Jy ! Component: 100 - total flux cleaned = 7.50906e-05 Jy ! Component: 150 - total flux cleaned = 6.02765e-05 Jy ! Component: 200 - total flux cleaned = -2.46079e-05 Jy ! Total flux subtracted in 200 components = -2.46079e-05 Jy ! Clean residual min=-0.001644 max=0.001399 Jy/beam ! Clean residual mean=-0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.145331 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 155 components and 0.145331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066952Jy sigma=1.312122 ! Fit after self-cal, rms=0.066960Jy sigma=1.312101 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.17551e-06 Jy ! Component: 100 - total flux cleaned = -2.76046e-05 Jy ! Component: 150 - total flux cleaned = -6.50248e-05 Jy ! Component: 200 - total flux cleaned = -0.000100751 Jy ! Total flux subtracted in 200 components = -0.000100751 Jy ! Clean residual min=-0.001643 max=0.001375 Jy/beam ! Clean residual mean=-0.000004 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.14523 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 161 components and 0.14523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066959Jy sigma=1.312090 ! Fit after self-cal, rms=0.066962Jy sigma=1.312079 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9366 mas, bmaj=1.186 mas, bpa=-87.47 degrees ! Estimated noise=0.248717 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9366 x 1.186 at -87.47 degrees (North through East) ! Clean map min=-0.0011791 max=0.04932 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7177 mas, bmaj=0.9821 mas, bpa=-89.93 degrees ! Estimated noise=0.526978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432671 Jy ! Component: 100 - total flux cleaned = 0.0671719 Jy ! Component: 150 - total flux cleaned = 0.0829866 Jy ! Component: 200 - total flux cleaned = 0.0941537 Jy ! Total flux subtracted in 200 components = 0.0941537 Jy ! Clean residual min=-0.004626 max=0.006276 Jy/beam ! Clean residual mean=-0.000006 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.0941536 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0941536 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9366 mas, bmaj=1.186 mas, bpa=-87.47 degrees ! Estimated noise=0.248717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119441 Jy ! Component: 100 - total flux cleaned = 0.0199268 Jy ! Component: 150 - total flux cleaned = 0.0259656 Jy ! Component: 200 - total flux cleaned = 0.0306494 Jy ! Total flux subtracted in 200 components = 0.0306494 Jy ! Clean residual min=-0.002132 max=0.002755 Jy/beam ! Clean residual mean=-0.000015 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.124803 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 37 components and 0.124803 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365953 Jy ! Component: 100 - total flux cleaned = 0.00661445 Jy ! Component: 150 - total flux cleaned = 0.00904029 Jy ! Component: 200 - total flux cleaned = 0.0110443 Jy ! Total flux subtracted in 200 components = 0.0110443 Jy ! Clean residual min=-0.001522 max=0.001728 Jy/beam ! Clean residual mean=-0.000008 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.135847 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 55 components and 0.135847 Jy ! Inverting map ! Added new window around map position (-44.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181095 Jy ! Component: 100 - total flux cleaned = 0.00327921 Jy ! Component: 150 - total flux cleaned = 0.00456489 Jy ! Component: 200 - total flux cleaned = 0.00557101 Jy ! Total flux subtracted in 200 components = 0.00557101 Jy ! Clean residual min=-0.001420 max=0.001490 Jy/beam ! Clean residual mean=-0.000004 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.141418 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 80 components and 0.141418 Jy ! Inverting map ! Added new window around map position (-44.8, -33.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133083 Jy ! Component: 100 - total flux cleaned = 0.00207372 Jy ! Component: 150 - total flux cleaned = 0.00267628 Jy ! Component: 200 - total flux cleaned = 0.0030346 Jy ! Total flux subtracted in 200 components = 0.0030346 Jy ! Clean residual min=-0.001328 max=0.001246 Jy/beam ! Clean residual mean=-0.000003 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.144453 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 93 components and 0.144453 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=2.259 mas, bpa=77.11 degrees ! Estimated noise=0.335628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123083 Jy ! Component: 100 - total flux cleaned = 0.00146974 Jy ! Component: 150 - total flux cleaned = 0.00146777 Jy ! Component: 200 - total flux cleaned = 0.00144042 Jy ! Total flux subtracted in 200 components = 0.00144042 Jy ! Clean residual min=-0.001658 max=0.001340 Jy/beam ! Clean residual mean=-0.000003 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.145893 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.32583e-07 Jy ! Component: 100 - total flux cleaned = 2.02986e-05 Jy ! Component: 150 - total flux cleaned = -3.81276e-05 Jy ! Component: 200 - total flux cleaned = -9.2399e-05 Jy ! Total flux subtracted in 200 components = -9.2399e-05 Jy ! Clean residual min=-0.001616 max=0.001329 Jy/beam ! Clean residual mean=-0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.145801 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 134 components and 0.145801 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9366 mas, bmaj=1.186 mas, bpa=-87.47 degrees ! Estimated noise=0.248717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.57809e-05 Jy ! Component: 100 - total flux cleaned = -3.16082e-05 Jy ! Component: 150 - total flux cleaned = 1.29371e-05 Jy ! Component: 200 - total flux cleaned = 0.000117686 Jy ! Total flux subtracted in 200 components = 0.000117686 Jy ! Clean residual min=-0.001238 max=0.001138 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.145919 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 150 components and 0.145919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066909Jy sigma=1.311213 ! Fit after self-cal, rms=0.066891Jy sigma=1.310815 wmodel J0853+6722_X_map.mod ! Writing 150 model components to file: J0853+6722_X_map.mod wobs J0853+6722_X_uvs.fits ! Writing UV FITS file: J0853+6722_X_uvs.fits wwins J0853+6722_X_map.win ! wwins: Wrote 7 windows to J0853+6722_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313377 Jy ! Component: 100 - total flux cleaned = -0.000374731 Jy ! Component: 150 - total flux cleaned = -0.000394664 Jy ! Component: 200 - total flux cleaned = -0.000433379 Jy ! Component: 250 - total flux cleaned = -0.000415053 Jy ! Component: 300 - total flux cleaned = -0.000433436 Jy ! Component: 350 - total flux cleaned = -0.000503711 Jy ! Component: 400 - total flux cleaned = -0.000417159 Jy ! Component: 450 - total flux cleaned = -0.000349521 Jy ! Component: 500 - total flux cleaned = -0.000282807 Jy ! Component: 550 - total flux cleaned = -0.000233806 Jy ! Component: 600 - total flux cleaned = -0.000201336 Jy ! Component: 650 - total flux cleaned = -0.000122202 Jy ! Component: 700 - total flux cleaned = -4.40803e-05 Jy ! Component: 750 - total flux cleaned = 1.71133e-05 Jy ! Component: 800 - total flux cleaned = 4.766e-05 Jy ! Component: 850 - total flux cleaned = 0.000122632 Jy ! Component: 900 - total flux cleaned = 0.000166795 Jy ! Component: 950 - total flux cleaned = 0.000225477 Jy ! Component: 1000 - total flux cleaned = 0.000254268 Jy ! Component: 1050 - total flux cleaned = 0.000326082 Jy ! Component: 1100 - total flux cleaned = 0.000382813 Jy ! Component: 1150 - total flux cleaned = 0.000453086 Jy ! Component: 1200 - total flux cleaned = 0.000536427 Jy ! Component: 1250 - total flux cleaned = 0.000563791 Jy ! Component: 1300 - total flux cleaned = 0.000604654 Jy ! Component: 1350 - total flux cleaned = 0.000645286 Jy ! Component: 1400 - total flux cleaned = 0.000685518 Jy ! Component: 1450 - total flux cleaned = 0.000751809 Jy ! Component: 1500 - total flux cleaned = 0.000778258 Jy ! Component: 1550 - total flux cleaned = 0.000830312 Jy ! Component: 1600 - total flux cleaned = 0.000907695 Jy ! Component: 1650 - total flux cleaned = 0.000933322 Jy ! Component: 1700 - total flux cleaned = 0.000958654 Jy ! Component: 1750 - total flux cleaned = 0.000983785 Jy ! Component: 1800 - total flux cleaned = 0.00105873 Jy ! Component: 1850 - total flux cleaned = 0.00104656 Jy ! Component: 1900 - total flux cleaned = 0.00110804 Jy ! Component: 1950 - total flux cleaned = 0.00115658 Jy ! Component: 2000 - total flux cleaned = 0.0011687 Jy ! Component: 2050 - total flux cleaned = 0.00115676 Jy ! Component: 2100 - total flux cleaned = 0.00121612 Jy ! Component: 2150 - total flux cleaned = 0.00122794 Jy ! Component: 2200 - total flux cleaned = 0.00123966 Jy ! Component: 2250 - total flux cleaned = 0.00122804 Jy ! Component: 2300 - total flux cleaned = 0.00120494 Jy ! Component: 2350 - total flux cleaned = 0.00127374 Jy ! Component: 2400 - total flux cleaned = 0.00122823 Jy ! Component: 2450 - total flux cleaned = 0.00127343 Jy ! Component: 2500 - total flux cleaned = 0.00126226 Jy ! Component: 2550 - total flux cleaned = 0.00132932 Jy ! Component: 2600 - total flux cleaned = 0.0012848 Jy ! Component: 2650 - total flux cleaned = 0.00132891 Jy ! Component: 2700 - total flux cleaned = 0.00133979 Jy ! Component: 2750 - total flux cleaned = 0.00136166 Jy ! Component: 2800 - total flux cleaned = 0.00137247 Jy ! Component: 2850 - total flux cleaned = 0.00139395 Jy ! Component: 2900 - total flux cleaned = 0.00137262 Jy ! Component: 2950 - total flux cleaned = 0.00140455 Jy ! Component: 3000 - total flux cleaned = 0.00139401 Jy ! Component: 3050 - total flux cleaned = 0.00139407 Jy ! Component: 3100 - total flux cleaned = 0.00138367 Jy ! Component: 3150 - total flux cleaned = 0.00145631 Jy ! Component: 3200 - total flux cleaned = 0.00143576 Jy ! Component: 3250 - total flux cleaned = 0.00142557 Jy ! Component: 3300 - total flux cleaned = 0.0014052 Jy ! Component: 3350 - total flux cleaned = 0.00147608 Jy ! Component: 3400 - total flux cleaned = 0.00146595 Jy ! Component: 3450 - total flux cleaned = 0.00147588 Jy ! Component: 3500 - total flux cleaned = 0.00150574 Jy ! Component: 3550 - total flux cleaned = 0.0014958 Jy ! Component: 3600 - total flux cleaned = 0.00151562 Jy ! Component: 3650 - total flux cleaned = 0.00156471 Jy ! Component: 3700 - total flux cleaned = 0.00164276 Jy ! Component: 3750 - total flux cleaned = 0.00161361 Jy ! Component: 3800 - total flux cleaned = 0.00163291 Jy ! Component: 3850 - total flux cleaned = 0.00170963 Jy ! Component: 3900 - total flux cleaned = 0.00174772 Jy ! Component: 3950 - total flux cleaned = 0.00171927 Jy ! Component: 4000 - total flux cleaned = 0.00178539 Jy ! Component: 4050 - total flux cleaned = 0.00178532 Jy ! Total flux subtracted in 4096 components = 0.00182277 Jy ! Clean residual min=-0.000643 max=0.000711 Jy/beam ! Clean residual mean=0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.147741 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 453 components and 0.147741 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0853+6722_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9366 x 1.186 at -87.47 degrees (North through East) ! Clean map min=-0.0010413 max=0.048999 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0853+6722_X_map.fits wmodel /vlbi/uf001/uva//J0853+6722_X_map.mod ! Writing 453 model components to file: /vlbi/uf001/uva//J0853+6722_X_map.mod wobs /vlbi/uf001/uva//J0853+6722_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0853+6722_X_uvs.fits wwins /vlbi/uf001/uva//J0853+6722_X_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uva//J0853+6722_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0489993 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156194 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.956301 0.956301 1.9126 3.8252 7.65041 15.3008 30.6016 61.2033 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.048 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 313.708 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0853+6722_X_dfm.log closed on Mon Jan 14 00:09:41 2019