! Started logfile: /vlbi/uf001/uva//J0853+0654_X_dfm.log on Mon Jan 14 00:09:10 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0853+0654_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0853+0654_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975309 visibilities/baseline/integration-bin. ! Found source: J0853+0654 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 37920 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0853+0654_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.129347Jy sigma=22.009077 ! Fit after self-cal, rms=0.560596Jy sigma=11.470939 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6897 mas, bmaj=1.648 mas, bpa=-1.967 degrees ! Estimated noise=0.333589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.327111 Jy ! Component: 100 - total flux cleaned = 0.419359 Jy ! Total flux subtracted in 100 components = 0.419359 Jy ! Clean residual min=-0.033273 max=0.125704 Jy/beam ! Clean residual mean=-0.000053 rms=0.007182 Jy/beam ! Combined flux in latest and established models = 0.419359 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.419359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.221553Jy sigma=4.073036 ! Fit after self-cal, rms=0.221412Jy sigma=4.071558 ! Inverting map ! Added new window around map position (1.2, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102398 Jy ! Component: 100 - total flux cleaned = 0.153551 Jy ! Total flux subtracted in 100 components = 0.153551 Jy ! Clean residual min=-0.019314 max=0.036521 Jy/beam ! Clean residual mean=-0.000032 rms=0.004298 Jy/beam ! Combined flux in latest and established models = 0.57291 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.57291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145150Jy sigma=2.656550 ! Fit after self-cal, rms=0.139559Jy sigma=2.537441 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443734 Jy ! Component: 100 - total flux cleaned = 0.0753648 Jy ! Total flux subtracted in 100 components = 0.0753648 Jy ! Clean residual min=-0.015585 max=0.021232 Jy/beam ! Clean residual mean=-0.000018 rms=0.003028 Jy/beam ! Combined flux in latest and established models = 0.648275 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.648275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110063Jy sigma=2.017023 ! Fit after self-cal, rms=0.109270Jy sigma=2.000085 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262409 Jy ! Component: 100 - total flux cleaned = 0.0459103 Jy ! Total flux subtracted in 100 components = 0.0459103 Jy ! Clean residual min=-0.013094 max=0.019155 Jy/beam ! Clean residual mean=-0.000010 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 0.694185 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.694185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094821Jy sigma=1.752461 ! Fit after self-cal, rms=0.094484Jy sigma=1.745359 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200197 Jy ! Component: 100 - total flux cleaned = 0.0352706 Jy ! Total flux subtracted in 100 components = 0.0352706 Jy ! Clean residual min=-0.010938 max=0.016092 Jy/beam ! Clean residual mean=-0.000004 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.729456 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.729456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085218Jy sigma=1.586041 ! Fit after self-cal, rms=0.085055Jy sigma=1.582183 ! Inverting map ! Added new window around map position (6.6, -9.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156261 Jy ! Component: 100 - total flux cleaned = 0.0274527 Jy ! Total flux subtracted in 100 components = 0.0274527 Jy ! Clean residual min=-0.009256 max=0.014081 Jy/beam ! Clean residual mean=-0.000002 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 0.756909 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 50 components and 0.756909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079313Jy sigma=1.483706 ! Fit after self-cal, rms=0.079136Jy sigma=1.479804 ! Inverting map ! Added new window around map position (-4.6, 13.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134383 Jy ! Component: 100 - total flux cleaned = 0.0234784 Jy ! Total flux subtracted in 100 components = 0.0234784 Jy ! Clean residual min=-0.008535 max=0.012163 Jy/beam ! Clean residual mean=0.000001 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 0.780387 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.780387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075301Jy sigma=1.410689 ! Fit after self-cal, rms=0.075221Jy sigma=1.408775 ! Inverting map ! Added new window around map position (-5.8, 11.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116943 Jy ! Component: 100 - total flux cleaned = 0.0201629 Jy ! Total flux subtracted in 100 components = 0.0201629 Jy ! Clean residual min=-0.007993 max=0.011022 Jy/beam ! Clean residual mean=0.000003 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.80055 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.80055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072291Jy sigma=1.357037 ! Fit after self-cal, rms=0.072204Jy sigma=1.355132 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8514 mas, bmaj=1.916 mas, bpa=-1.67 degrees ! Estimated noise=0.186866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136475 Jy ! Component: 100 - total flux cleaned = 0.0239379 Jy ! Component: 150 - total flux cleaned = 0.0323645 Jy ! Component: 200 - total flux cleaned = 0.039403 Jy ! Total flux subtracted in 200 components = 0.039403 Jy ! Clean residual min=-0.008056 max=0.008170 Jy/beam ! Clean residual mean=0.000013 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.839953 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 93 components and 0.839953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067801Jy sigma=1.283542 ! Fit after self-cal, rms=0.067712Jy sigma=1.282082 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8514 x 1.916 at -1.67 degrees (North through East) ! Clean map min=-0.0076548 max=0.4392 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.97 KP 1.00 ! LA 1.02 MK 1.03 NL 1.04 OV 0.93 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.96 KP 1.00 ! LA 1.02 MK 1.04 NL 1.04 OV 0.93 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.97 KP 1.00 ! LA 1.03 MK 1.02 NL 1.05 OV 0.94 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.98 KP 1.00 ! LA 1.02 MK 1.03 NL 1.03 OV 0.94 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.98 KP 1.00 ! LA 1.02 MK 1.03 NL 1.05 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.98 KP 1.00 ! LA 1.02 MK 1.03 NL 1.04 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.97 KP 1.00 ! LA 1.02 MK 1.04 NL 1.05 OV 0.95 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.97 KP 1.01 ! LA 1.02 MK 1.05 NL 1.05 OV 0.93 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.98 KP 0.99 ! LA 1.01 MK 1.05 NL 1.04 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.98 KP 0.99 ! LA 1.02 MK 1.04 NL 1.06 OV 0.94 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.97 KP 1.00 ! LA 1.04 MK 1.06 NL 1.06 OV 0.93 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.97 KP 1.00 ! LA 1.02 MK 1.02 NL 1.05 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Fit before self-cal, rms=0.067712Jy sigma=1.282082 ! Fit after self-cal, rms=0.061558Jy sigma=1.166003 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8567 mas, bmaj=1.932 mas, bpa=-1.49 degrees ! Estimated noise=0.187755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00378481 Jy ! Component: 100 - total flux cleaned = -0.00524548 Jy ! Component: 150 - total flux cleaned = -0.00602822 Jy ! Component: 200 - total flux cleaned = -0.00686365 Jy ! Total flux subtracted in 200 components = -0.00686365 Jy ! Clean residual min=-0.005631 max=0.004947 Jy/beam ! Clean residual mean=0.000008 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.833089 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 0.833089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060618Jy sigma=1.147807 ! Fit after self-cal, rms=0.060597Jy sigma=1.147332 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060597Jy sigma=1.147332 ! Fit after self-cal, rms=0.058418Jy sigma=1.096241 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8555 mas, bmaj=1.925 mas, bpa=-1.51 degrees ! Estimated noise=0.187969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00472901 Jy ! Component: 100 - total flux cleaned = -0.00626194 Jy ! Component: 150 - total flux cleaned = -0.00699472 Jy ! Component: 200 - total flux cleaned = -0.00743953 Jy ! Total flux subtracted in 200 components = -0.00743953 Jy ! Clean residual min=-0.002981 max=0.003367 Jy/beam ! Clean residual mean=0.000003 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.82565 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 134 components and 0.82565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057874Jy sigma=1.084801 ! Fit after self-cal, rms=0.057831Jy sigma=1.084080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.8, -18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161413 Jy ! Component: 100 - total flux cleaned = 0.00128661 Jy ! Component: 150 - total flux cleaned = 0.00106435 Jy ! Component: 200 - total flux cleaned = 0.000927744 Jy ! Total flux subtracted in 200 components = 0.000927744 Jy ! Clean residual min=-0.002944 max=0.002755 Jy/beam ! Clean residual mean=0.000003 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.826577 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 147 components and 0.826577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057597Jy sigma=1.079402 ! Fit after self-cal, rms=0.057584Jy sigma=1.079269 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057584Jy sigma=1.079269 ! Fit after self-cal, rms=0.057442Jy sigma=1.075824 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8543 mas, bmaj=1.924 mas, bpa=-1.468 degrees ! Estimated noise=0.187989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00304841 Jy ! Component: 100 - total flux cleaned = -0.00443378 Jy ! Component: 150 - total flux cleaned = -0.00504838 Jy ! Component: 200 - total flux cleaned = -0.00532038 Jy ! Total flux subtracted in 200 components = -0.00532038 Jy ! Clean residual min=-0.002490 max=0.002476 Jy/beam ! Clean residual mean=0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.821257 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 153 components and 0.821257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057196Jy sigma=1.070531 ! Fit after self-cal, rms=0.057183Jy sigma=1.070361 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000341933 Jy ! Component: 100 - total flux cleaned = -0.000767974 Jy ! Component: 150 - total flux cleaned = -0.000876977 Jy ! Component: 200 - total flux cleaned = -0.000929889 Jy ! Total flux subtracted in 200 components = -0.000929889 Jy ! Clean residual min=-0.002390 max=0.002373 Jy/beam ! Clean residual mean=0.000002 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.820327 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 155 components and 0.820327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057083Jy sigma=1.068205 ! Fit after self-cal, rms=0.057076Jy sigma=1.068135 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057076Jy sigma=1.068135 ! Fit after self-cal, rms=0.057021Jy sigma=1.066611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.041 mas, bmaj=2.991 mas, bpa=-4.117 degrees ! Estimated noise=0.253681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00259252 Jy ! Component: 100 - total flux cleaned = -0.00383235 Jy ! Component: 150 - total flux cleaned = -0.0044991 Jy ! Component: 200 - total flux cleaned = -0.00492366 Jy ! Total flux subtracted in 200 components = -0.00492366 Jy ! Clean residual min=-0.002335 max=0.002358 Jy/beam ! Clean residual mean=0.000003 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.815403 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 169 components and 0.815403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056969Jy sigma=1.065713 ! Fit after self-cal, rms=0.056962Jy sigma=1.065523 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547199 Jy ! Component: 100 - total flux cleaned = -0.000873079 Jy ! Component: 150 - total flux cleaned = -0.00116217 Jy ! Component: 200 - total flux cleaned = -0.00134056 Jy ! Total flux subtracted in 200 components = -0.00134056 Jy ! Clean residual min=-0.002255 max=0.002286 Jy/beam ! Clean residual mean=0.000003 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.814063 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 188 components and 0.814063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056941Jy sigma=1.065154 ! Fit after self-cal, rms=0.056938Jy sigma=1.065106 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=1.923 mas, bpa=-1.426 degrees ! Estimated noise=0.188024 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8537 x 1.923 at -1.426 degrees (North through East) ! Clean map min=-0.0026689 max=0.43958 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6904 mas, bmaj=1.649 mas, bpa=-1.72 degrees ! Estimated noise=0.33683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333184 Jy ! Component: 100 - total flux cleaned = 0.459989 Jy ! Component: 150 - total flux cleaned = 0.537785 Jy ! Component: 200 - total flux cleaned = 0.590656 Jy ! Total flux subtracted in 200 components = 0.590656 Jy ! Clean residual min=-0.012013 max=0.029325 Jy/beam ! Clean residual mean=-0.000030 rms=0.003025 Jy/beam ! Combined flux in latest and established models = 0.590656 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.590656 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=1.923 mas, bpa=-1.426 degrees ! Estimated noise=0.188024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05973 Jy ! Component: 100 - total flux cleaned = 0.0987329 Jy ! Component: 150 - total flux cleaned = 0.12565 Jy ! Component: 200 - total flux cleaned = 0.144765 Jy ! Total flux subtracted in 200 components = 0.144765 Jy ! Clean residual min=-0.005378 max=0.011202 Jy/beam ! Clean residual mean=-0.000020 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.735421 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 45 components and 0.735421 Jy ! Inverting map ! Added new window around map position (-0.4, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142388 Jy ! Component: 100 - total flux cleaned = 0.0252954 Jy ! Component: 150 - total flux cleaned = 0.0341835 Jy ! Component: 200 - total flux cleaned = 0.0414452 Jy ! Total flux subtracted in 200 components = 0.0414452 Jy ! Clean residual min=-0.003123 max=0.005147 Jy/beam ! Clean residual mean=-0.000007 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.776866 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 89 components and 0.776866 Jy ! Inverting map ! Added new window around map position (5.8, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613677 Jy ! Component: 100 - total flux cleaned = 0.0112007 Jy ! Component: 150 - total flux cleaned = 0.0154532 Jy ! Component: 200 - total flux cleaned = 0.0190411 Jy ! Total flux subtracted in 200 components = 0.0190411 Jy ! Clean residual min=-0.002561 max=0.003227 Jy/beam ! Clean residual mean=-0.000002 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.795907 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 120 components and 0.795908 Jy ! Inverting map ! Added new window around map position (-2.4, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336382 Jy ! Component: 100 - total flux cleaned = 0.0055877 Jy ! Component: 150 - total flux cleaned = 0.00748122 Jy ! Component: 200 - total flux cleaned = 0.00927444 Jy ! Total flux subtracted in 200 components = 0.00927444 Jy ! Clean residual min=-0.002222 max=0.002179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.805182 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 139 components and 0.805182 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.041 mas, bmaj=2.991 mas, bpa=-4.117 degrees ! Estimated noise=0.253681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299633 Jy ! Component: 100 - total flux cleaned = 0.00495744 Jy ! Component: 150 - total flux cleaned = 0.00608507 Jy ! Component: 200 - total flux cleaned = 0.00687725 Jy ! Total flux subtracted in 200 components = 0.00687725 Jy ! Clean residual min=-0.002370 max=0.002309 Jy/beam ! Clean residual mean=0.000002 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.812059 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300033 Jy ! Component: 100 - total flux cleaned = 0.000481591 Jy ! Component: 150 - total flux cleaned = 0.000523822 Jy ! Component: 200 - total flux cleaned = 0.000602411 Jy ! Total flux subtracted in 200 components = 0.000602411 Jy ! Clean residual min=-0.002263 max=0.002279 Jy/beam ! Clean residual mean=0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.812662 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 191 components and 0.812662 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=1.923 mas, bpa=-1.426 degrees ! Estimated noise=0.188024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109725 Jy ! Component: 100 - total flux cleaned = -0.000969599 Jy ! Component: 150 - total flux cleaned = -0.000729189 Jy ! Component: 200 - total flux cleaned = -0.00061905 Jy ! Total flux subtracted in 200 components = -0.00061905 Jy ! Clean residual min=-0.001964 max=0.001895 Jy/beam ! Clean residual mean=0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.812043 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 205 components and 0.812042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056819Jy sigma=1.060884 ! Fit after self-cal, rms=0.056771Jy sigma=1.059998 wmodel J0853+0654_X_map.mod ! Writing 205 model components to file: J0853+0654_X_map.mod wobs J0853+0654_X_uvs.fits ! Writing UV FITS file: J0853+0654_X_uvs.fits wwins J0853+0654_X_map.win ! wwins: Wrote 11 windows to J0853+0654_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170743 Jy ! Component: 100 - total flux cleaned = -0.000568436 Jy ! Component: 150 - total flux cleaned = -0.000824758 Jy ! Component: 200 - total flux cleaned = -0.00101174 Jy ! Component: 250 - total flux cleaned = -0.00119552 Jy ! Component: 300 - total flux cleaned = -0.00146395 Jy ! Component: 350 - total flux cleaned = -0.00178347 Jy ! Component: 400 - total flux cleaned = -0.00203892 Jy ! Component: 450 - total flux cleaned = -0.00223344 Jy ! Component: 500 - total flux cleaned = -0.00236959 Jy ! Component: 550 - total flux cleaned = -0.00247631 Jy ! Component: 600 - total flux cleaned = -0.00260732 Jy ! Component: 650 - total flux cleaned = -0.00276175 Jy ! Component: 700 - total flux cleaned = -0.00283743 Jy ! Component: 750 - total flux cleaned = -0.00293727 Jy ! Component: 800 - total flux cleaned = -0.00303475 Jy ! Component: 850 - total flux cleaned = -0.00305888 Jy ! Component: 900 - total flux cleaned = -0.00313056 Jy ! Component: 950 - total flux cleaned = -0.00324805 Jy ! Component: 1000 - total flux cleaned = -0.00331773 Jy ! Component: 1050 - total flux cleaned = -0.00338682 Jy ! Component: 1100 - total flux cleaned = -0.00343248 Jy ! Component: 1150 - total flux cleaned = -0.00345521 Jy ! Component: 1200 - total flux cleaned = -0.00356538 Jy ! Component: 1250 - total flux cleaned = -0.00356495 Jy ! Component: 1300 - total flux cleaned = -0.00360838 Jy ! Component: 1350 - total flux cleaned = -0.00365036 Jy ! Component: 1400 - total flux cleaned = -0.00373398 Jy ! Component: 1450 - total flux cleaned = -0.00371304 Jy ! Component: 1500 - total flux cleaned = -0.00377474 Jy ! Component: 1550 - total flux cleaned = -0.0038152 Jy ! Component: 1600 - total flux cleaned = -0.00383536 Jy ! Component: 1650 - total flux cleaned = -0.00387524 Jy ! Component: 1700 - total flux cleaned = -0.00395381 Jy ! Component: 1750 - total flux cleaned = -0.00395357 Jy ! Component: 1800 - total flux cleaned = -0.00393412 Jy ! Component: 1850 - total flux cleaned = -0.00397248 Jy ! Component: 1900 - total flux cleaned = -0.00404787 Jy ! Component: 1950 - total flux cleaned = -0.00401085 Jy ! Component: 2000 - total flux cleaned = -0.00404797 Jy ! Component: 2050 - total flux cleaned = -0.00402946 Jy ! Component: 2100 - total flux cleaned = -0.00408402 Jy ! Component: 2150 - total flux cleaned = -0.00413807 Jy ! Component: 2200 - total flux cleaned = -0.00408445 Jy ! Component: 2250 - total flux cleaned = -0.00413744 Jy ! Component: 2300 - total flux cleaned = -0.00413753 Jy ! Component: 2350 - total flux cleaned = -0.00412008 Jy ! Component: 2400 - total flux cleaned = -0.00418881 Jy ! Component: 2450 - total flux cleaned = -0.00422304 Jy ! Component: 2500 - total flux cleaned = -0.00422309 Jy ! Component: 2550 - total flux cleaned = -0.00420612 Jy ! Component: 2600 - total flux cleaned = -0.00425597 Jy ! Component: 2650 - total flux cleaned = -0.004223 Jy ! Component: 2700 - total flux cleaned = -0.00419057 Jy ! Component: 2750 - total flux cleaned = -0.00422306 Jy ! Component: 2800 - total flux cleaned = -0.00423943 Jy ! Component: 2850 - total flux cleaned = -0.00433476 Jy ! Component: 2900 - total flux cleaned = -0.00422436 Jy ! Component: 2950 - total flux cleaned = -0.00427167 Jy ! Component: 3000 - total flux cleaned = -0.00433392 Jy ! Component: 3050 - total flux cleaned = -0.00430296 Jy ! Component: 3100 - total flux cleaned = -0.00433344 Jy ! Component: 3150 - total flux cleaned = -0.00430323 Jy ! Component: 3200 - total flux cleaned = -0.0043634 Jy ! Component: 3250 - total flux cleaned = -0.00431845 Jy ! Component: 3300 - total flux cleaned = -0.00431856 Jy ! Component: 3350 - total flux cleaned = -0.0043186 Jy ! Component: 3400 - total flux cleaned = -0.00430397 Jy ! Component: 3450 - total flux cleaned = -0.0043038 Jy ! Component: 3500 - total flux cleaned = -0.00424632 Jy ! Component: 3550 - total flux cleaned = -0.00424655 Jy ! Component: 3600 - total flux cleaned = -0.00427492 Jy ! Component: 3650 - total flux cleaned = -0.00426087 Jy ! Component: 3700 - total flux cleaned = -0.00423284 Jy ! Component: 3750 - total flux cleaned = -0.00414959 Jy ! Component: 3800 - total flux cleaned = -0.00413595 Jy ! Component: 3850 - total flux cleaned = -0.00410857 Jy ! Component: 3900 - total flux cleaned = -0.00412203 Jy ! Component: 3950 - total flux cleaned = -0.00398709 Jy ! Component: 4000 - total flux cleaned = -0.0040139 Jy ! Component: 4050 - total flux cleaned = -0.00400074 Jy ! Total flux subtracted in 4096 components = -0.00400069 Jy ! Clean residual min=-0.000714 max=0.000705 Jy/beam ! Clean residual mean=0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.808042 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 515 components and 0.808042 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0853+0654_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8537 x 1.923 at -1.426 degrees (North through East) ! Clean map min=-0.0018178 max=0.44571 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0853+0654_X_map.fits wmodel /vlbi/uf001/uva//J0853+0654_X_map.mod ! Writing 515 model components to file: /vlbi/uf001/uva//J0853+0654_X_map.mod wobs /vlbi/uf001/uva//J0853+0654_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0853+0654_X_uvs.fits wwins /vlbi/uf001/uva//J0853+0654_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0853+0654_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.445712 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229279 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.154324 0.154324 0.308647 0.617294 1.23459 2.46918 4.93835 9.87671 19.7534 39.5068 79.0136 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.445 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1943.97 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0853+0654_X_dfm.log closed on Mon Jan 14 00:09:17 2019