! Started logfile: /vlbi/uf001/uva//J0851+0845_X_dfm.log on Mon Jan 14 00:08:35 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0851+0845_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0851+0845_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.925926 visibilities/baseline/integration-bin.
! Found source: J0851+0845
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28500 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0851+0845_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004482Jy  sigma=24.365443
! Fit after  self-cal, rms=0.949427Jy  sigma=22.990320
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.713 mas, bmaj=1.657 mas, bpa=-1.9 degrees
! Estimated noise=0.319696 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344841 Jy
! Component: 100  -  total flux cleaned = 0.0504515 Jy
! Total flux subtracted in 100 components = 0.0504515 Jy
! Clean residual min=-0.004064 max=0.010657 Jy/beam
! Clean residual mean=-0.000004 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.0504515 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0504515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069729Jy  sigma=1.492244
! Fit after  self-cal, rms=0.068791Jy  sigma=1.469470
! Inverting map 
! Added new window around map position (0.8, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124058 Jy
! Component: 100  -  total flux cleaned = 0.020103 Jy
! Total flux subtracted in 100 components = 0.020103 Jy
! Clean residual min=-0.003161 max=0.008239 Jy/beam
! Clean residual mean=-0.000002 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.0705545 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.0705545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065276Jy  sigma=1.363082
! Fit after  self-cal, rms=0.065061Jy  sigma=1.357209
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00714996 Jy
! Component: 100  -  total flux cleaned = 0.0111255 Jy
! Total flux subtracted in 100 components = 0.0111255 Jy
! Clean residual min=-0.002644 max=0.005811 Jy/beam
! Clean residual mean=-0.000001 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.08168 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.08168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063965Jy  sigma=1.323887
! Fit after  self-cal, rms=0.063835Jy  sigma=1.320548
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431549 Jy
! Component: 100  -  total flux cleaned = 0.0056215 Jy
! Total flux subtracted in 100 components = 0.0056215 Jy
! Clean residual min=-0.002420 max=0.004071 Jy/beam
! Clean residual mean=-0.000000 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.0873015 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 21 components and 0.0873015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063467Jy  sigma=1.309844
! Fit after  self-cal, rms=0.063410Jy  sigma=1.308402
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8896 mas, bmaj=1.933 mas, bpa=-1.55 degrees
! Estimated noise=0.183408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00341144 Jy
! Component: 100  -  total flux cleaned = 0.00505352 Jy
! Component: 150  -  total flux cleaned = 0.00545144 Jy
! Component: 200  -  total flux cleaned = 0.00576962 Jy
! Total flux subtracted in 200 components = 0.00576962 Jy
! Clean residual min=-0.001787 max=0.002277 Jy/beam
! Clean residual mean=0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0930712 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.0930711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063228Jy  sigma=1.303300
! Fit after  self-cal, rms=0.063188Jy  sigma=1.302170
! Inverting map 
! Added new window around map position (0, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243208 Jy
! Component: 100  -  total flux cleaned = 0.0030303 Jy
! Component: 150  -  total flux cleaned = 0.00312762 Jy
! Component: 200  -  total flux cleaned = 0.00325292 Jy
! Total flux subtracted in 200 components = 0.00325292 Jy
! Clean residual min=-0.001711 max=0.001889 Jy/beam
! Clean residual mean=0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0963241 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.0963241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063061Jy  sigma=1.299241
! Fit after  self-cal, rms=0.063031Jy  sigma=1.298776
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8896 x 1.933 at -1.55 degrees (North through East)
! Clean map  min=-0.0016054  max=0.04734 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.87     KP        1.00     
!   LA        1.03     MK        1.05     NL        1.01     OV        0.90     
!   PT        0.92     SC        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        0.96     KP        1.02     
!   LA        1.01     MK        1.02     NL        1.07     OV        0.96     
!   PT        0.91     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.02     MK        1.06     NL        1.05     OV        0.96     
!   PT        0.92     SC        0.90     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.98     KP        1.04     
!   LA        1.02     MK        1.15     NL        1.03     OV        0.93     
!   PT        0.95     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.87     KP        1.02     
!   LA        1.00     MK        1.04     NL        0.98     OV        1.03     
!   PT        0.98     SC        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.97     KP        1.01     
!   LA        1.02     MK        0.94     NL        1.04     OV        0.94     
!   PT        0.91     SC        0.84     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.87     KP        1.02     
!   LA        1.04     MK        1.06     NL        1.01     OV        0.98     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.07     HN        0.90     KP        1.06     
!   LA        1.02     MK        0.98     NL        1.02     OV        0.95     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        0.93     KP        1.02     
!   LA        1.02     MK        0.95     NL        0.99     OV        0.95     
!   PT        0.96     SC        0.91     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.93     KP        1.08     
!   LA        1.03     MK        0.83     NL        1.02     OV        0.97     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.99     HN        0.83     KP        1.02     
!   LA        1.00     MK        0.82     NL        1.06     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.86     KP        1.07     
!   LA        0.99     MK        0.79     NL        1.02     OV        0.90     
!   PT        0.94     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.063031Jy  sigma=1.298776
! Fit after  self-cal, rms=0.059312Jy  sigma=1.293258
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8728 mas, bmaj=1.922 mas, bpa=-1.343 degrees
! Estimated noise=0.178645 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000247524 Jy
! Component: 100  -  total flux cleaned = -0.000247944 Jy
! Component: 150  -  total flux cleaned = -0.000305641 Jy
! Component: 200  -  total flux cleaned = -0.000356274 Jy
! Total flux subtracted in 200 components = -0.000356274 Jy
! Clean residual min=-0.001337 max=0.001404 Jy/beam
! Clean residual mean=0.000000 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0959678 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.0959678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059260Jy  sigma=1.292134
! Fit after  self-cal, rms=0.059222Jy  sigma=1.291579
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059222Jy  sigma=1.291579
! Fit after  self-cal, rms=0.062370Jy  sigma=1.287033
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8652 mas, bmaj=1.918 mas, bpa=-1.801 degrees
! Estimated noise=0.17606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234166 Jy
! Component: 100  -  total flux cleaned = 9.71479e-05 Jy
! Component: 150  -  total flux cleaned = 5.03129e-05 Jy
! Component: 200  -  total flux cleaned = 5.05584e-05 Jy
! Total flux subtracted in 200 components = 5.05584e-05 Jy
! Clean residual min=-0.001028 max=0.001084 Jy/beam
! Clean residual mean=-0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.0960184 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 73 components and 0.0960184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062343Jy  sigma=1.286298
! Fit after  self-cal, rms=0.062440Jy  sigma=1.285926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112975 Jy
! Component: 100  -  total flux cleaned = 0.00160537 Jy
! Component: 150  -  total flux cleaned = 0.00167583 Jy
! Component: 200  -  total flux cleaned = 0.00177576 Jy
! Total flux subtracted in 200 components = 0.00177576 Jy
! Clean residual min=-0.000917 max=0.000967 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0977941 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 0.0977941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062411Jy  sigma=1.285194
! Fit after  self-cal, rms=0.062399Jy  sigma=1.285043
! Inverting map 
! Added new window around map position (13.6, -24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000572304 Jy
! Component: 100  -  total flux cleaned = 0.000767379 Jy
! Component: 150  -  total flux cleaned = 0.000934754 Jy
! Component: 200  -  total flux cleaned = 0.00112187 Jy
! Total flux subtracted in 200 components = 0.00112187 Jy
! Clean residual min=-0.000922 max=0.000929 Jy/beam
! Clean residual mean=-0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.098916 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 92 components and 0.098916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062376Jy  sigma=1.284532
! Fit after  self-cal, rms=0.062370Jy  sigma=1.284425
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062370Jy  sigma=1.284425
! Fit after  self-cal, rms=0.062665Jy  sigma=1.284224
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8614 mas, bmaj=1.922 mas, bpa=-2.335 degrees
! Estimated noise=0.175178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000385201 Jy
! Component: 100  -  total flux cleaned = 0.000629354 Jy
! Component: 150  -  total flux cleaned = 0.000761257 Jy
! Component: 200  -  total flux cleaned = 0.00084513 Jy
! Total flux subtracted in 200 components = 0.00084513 Jy
! Clean residual min=-0.000909 max=0.000892 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0997611 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.0997611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062650Jy  sigma=1.283867
! Fit after  self-cal, rms=0.062658Jy  sigma=1.283787
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.6, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016008 Jy
! Component: 100  -  total flux cleaned = 0.00011275 Jy
! Component: 150  -  total flux cleaned = 0.00021001 Jy
! Component: 200  -  total flux cleaned = 0.000300256 Jy
! Total flux subtracted in 200 components = 0.000300256 Jy
! Clean residual min=-0.000891 max=0.000855 Jy/beam
! Clean residual mean=-0.000000 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.100061 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 109 components and 0.100061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062635Jy  sigma=1.283382
! Fit after  self-cal, rms=0.062626Jy  sigma=1.283321
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062626Jy  sigma=1.283321
! Fit after  self-cal, rms=0.062560Jy  sigma=1.283291
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.087 mas, bmaj=2.991 mas, bpa=-0.9217 degrees
! Estimated noise=0.233049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000236153 Jy
! Component: 100  -  total flux cleaned = 0.000322168 Jy
! Component: 150  -  total flux cleaned = 0.000336685 Jy
! Component: 200  -  total flux cleaned = 0.000349472 Jy
! Total flux subtracted in 200 components = 0.000349472 Jy
! Clean residual min=-0.000968 max=0.000865 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.100411 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 126 components and 0.100411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062552Jy  sigma=1.283201
! Fit after  self-cal, rms=0.062551Jy  sigma=1.283164
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.85316e-05 Jy
! Component: 100  -  total flux cleaned = 3.6591e-05 Jy
! Component: 150  -  total flux cleaned = 1.40303e-05 Jy
! Component: 200  -  total flux cleaned = -2.87577e-05 Jy
! Total flux subtracted in 200 components = -2.87577e-05 Jy
! Clean residual min=-0.000956 max=0.000854 Jy/beam
! Clean residual mean=0.000000 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.100382 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 135 components and 0.100382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062546Jy  sigma=1.283132
! Fit after  self-cal, rms=0.062543Jy  sigma=1.283118
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8588 mas, bmaj=1.923 mas, bpa=-2.599 degrees
! Estimated noise=0.174709 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8588 x 1.923 at -2.599 degrees (North through East)
! Clean map  min=-0.00083121  max=0.044688 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6917 mas, bmaj=1.656 mas, bpa=-3 degrees
! Estimated noise=0.296872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0346891 Jy
! Component: 100  -  total flux cleaned = 0.0536768 Jy
! Component: 150  -  total flux cleaned = 0.0655503 Jy
! Component: 200  -  total flux cleaned = 0.0735034 Jy
! Total flux subtracted in 200 components = 0.0735034 Jy
! Clean residual min=-0.002537 max=0.004873 Jy/beam
! Clean residual mean=-0.000002 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0735034 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0735034 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8588 mas, bmaj=1.923 mas, bpa=-2.599 degrees
! Estimated noise=0.174709 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00879207 Jy
! Component: 100  -  total flux cleaned = 0.0136531 Jy
! Component: 150  -  total flux cleaned = 0.0165415 Jy
! Component: 200  -  total flux cleaned = 0.0185157 Jy
! Total flux subtracted in 200 components = 0.0185157 Jy
! Clean residual min=-0.001082 max=0.001802 Jy/beam
! Clean residual mean=-0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0920191 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 40 components and 0.0920191 Jy
! Inverting map 
! Added new window around map position (-1, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177125 Jy
! Component: 100  -  total flux cleaned = 0.00301191 Jy
! Component: 150  -  total flux cleaned = 0.00380287 Jy
! Component: 200  -  total flux cleaned = 0.00433893 Jy
! Total flux subtracted in 200 components = 0.00433893 Jy
! Clean residual min=-0.000903 max=0.001156 Jy/beam
! Clean residual mean=-0.000000 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.0963581 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 0.0963581 Jy
! Inverting map 
! Added new window around map position (-5.6, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787756 Jy
! Component: 100  -  total flux cleaned = 0.00118447 Jy
! Component: 150  -  total flux cleaned = 0.00151409 Jy
! Component: 200  -  total flux cleaned = 0.00181511 Jy
! Total flux subtracted in 200 components = 0.00181511 Jy
! Clean residual min=-0.000832 max=0.000898 Jy/beam
! Clean residual mean=0.000000 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0981732 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 80 components and 0.0981732 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.087 mas, bmaj=2.991 mas, bpa=-0.9217 degrees
! Estimated noise=0.233049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000516578 Jy
! Component: 100  -  total flux cleaned = 0.000638375 Jy
! Component: 150  -  total flux cleaned = 0.000789616 Jy
! Component: 200  -  total flux cleaned = 0.000926809 Jy
! Total flux subtracted in 200 components = 0.000926809 Jy
! Clean residual min=-0.001013 max=0.000892 Jy/beam
! Clean residual mean=0.000000 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0991 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157408 Jy
! Component: 100  -  total flux cleaned = 0.000221182 Jy
! Component: 150  -  total flux cleaned = 0.000280612 Jy
! Component: 200  -  total flux cleaned = 0.000335478 Jy
! Total flux subtracted in 200 components = 0.000335478 Jy
! Clean residual min=-0.000971 max=0.000876 Jy/beam
! Clean residual mean=0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0994355 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 119 components and 0.0994355 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8588 mas, bmaj=1.923 mas, bpa=-2.599 degrees
! Estimated noise=0.174709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163893 Jy
! Component: 100  -  total flux cleaned = -0.000187096 Jy
! Component: 150  -  total flux cleaned = -0.000188368 Jy
! Component: 200  -  total flux cleaned = -0.000149233 Jy
! Total flux subtracted in 200 components = -0.000149233 Jy
! Clean residual min=-0.000835 max=0.000847 Jy/beam
! Clean residual mean=0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0992863 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 147 components and 0.0992862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062540Jy  sigma=1.282976
! Fit after  self-cal, rms=0.062526Jy  sigma=1.282406
wmodel J0851+0845_X_map.mod
! Writing 147 model components to file: J0851+0845_X_map.mod
wobs   J0851+0845_X_uvs.fits
! Writing UV FITS file: J0851+0845_X_uvs.fits
wwins  J0851+0845_X_map.win
! wwins: Wrote 8 windows to J0851+0845_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110483 Jy
! Component: 100  -  total flux cleaned = 5.18037e-05 Jy
! Component: 150  -  total flux cleaned = -1.85627e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101023 Jy
! Component: 250  -  total flux cleaned = -0.000114388 Jy
! Component: 300  -  total flux cleaned = -0.000140848 Jy
! Component: 350  -  total flux cleaned = -0.000205344 Jy
! Component: 400  -  total flux cleaned = -0.000192549 Jy
! Component: 450  -  total flux cleaned = -0.000167616 Jy
! Component: 500  -  total flux cleaned = -0.000130821 Jy
! Component: 550  -  total flux cleaned = -0.000130723 Jy
! Component: 600  -  total flux cleaned = -9.49456e-05 Jy
! Component: 650  -  total flux cleaned = -7.14906e-05 Jy
! Component: 700  -  total flux cleaned = -4.83473e-05 Jy
! Component: 750  -  total flux cleaned = -2.6917e-06 Jy
! Component: 800  -  total flux cleaned = 3.09601e-05 Jy
! Component: 850  -  total flux cleaned = 6.41192e-05 Jy
! Component: 900  -  total flux cleaned = 7.51984e-05 Jy
! Component: 950  -  total flux cleaned = 0.000130015 Jy
! Component: 1000  -  total flux cleaned = 0.000183948 Jy
! Component: 1050  -  total flux cleaned = 0.000237364 Jy
! Component: 1100  -  total flux cleaned = 0.000290195 Jy
! Component: 1150  -  total flux cleaned = 0.000342626 Jy
! Component: 1200  -  total flux cleaned = 0.000332177 Jy
! Component: 1250  -  total flux cleaned = 0.000404407 Jy
! Component: 1300  -  total flux cleaned = 0.000394195 Jy
! Component: 1350  -  total flux cleaned = 0.000404436 Jy
! Component: 1400  -  total flux cleaned = 0.000454681 Jy
! Component: 1450  -  total flux cleaned = 0.000464552 Jy
! Component: 1500  -  total flux cleaned = 0.00050406 Jy
! Component: 1550  -  total flux cleaned = 0.000513978 Jy
! Component: 1600  -  total flux cleaned = 0.000543191 Jy
! Component: 1650  -  total flux cleaned = 0.00056256 Jy
! Component: 1700  -  total flux cleaned = 0.000562512 Jy
! Component: 1750  -  total flux cleaned = 0.000562597 Jy
! Component: 1800  -  total flux cleaned = 0.000562598 Jy
! Component: 1850  -  total flux cleaned = 0.000553258 Jy
! Component: 1900  -  total flux cleaned = 0.000534607 Jy
! Component: 1950  -  total flux cleaned = 0.000571639 Jy
! Component: 2000  -  total flux cleaned = 0.000544178 Jy
! Component: 2050  -  total flux cleaned = 0.000580733 Jy
! Component: 2100  -  total flux cleaned = 0.000553577 Jy
! Component: 2150  -  total flux cleaned = 0.000562491 Jy
! Component: 2200  -  total flux cleaned = 0.00054457 Jy
! Component: 2250  -  total flux cleaned = 0.000571199 Jy
! Component: 2300  -  total flux cleaned = 0.000544646 Jy
! Component: 2350  -  total flux cleaned = 0.000553379 Jy
! Component: 2400  -  total flux cleaned = 0.00052711 Jy
! Component: 2450  -  total flux cleaned = 0.000553207 Jy
! Component: 2500  -  total flux cleaned = 0.000527233 Jy
! Component: 2550  -  total flux cleaned = 0.000552967 Jy
! Component: 2600  -  total flux cleaned = 0.000527338 Jy
! Component: 2650  -  total flux cleaned = 0.000518885 Jy
! Component: 2700  -  total flux cleaned = 0.000502023 Jy
! Component: 2750  -  total flux cleaned = 0.000493591 Jy
! Component: 2800  -  total flux cleaned = 0.000468444 Jy
! Component: 2850  -  total flux cleaned = 0.000460182 Jy
! Component: 2900  -  total flux cleaned = 0.000460106 Jy
! Component: 2950  -  total flux cleaned = 0.000443618 Jy
! Component: 3000  -  total flux cleaned = 0.000419173 Jy
! Component: 3050  -  total flux cleaned = 0.00041111 Jy
! Component: 3100  -  total flux cleaned = 0.000411137 Jy
! Component: 3150  -  total flux cleaned = 0.00040315 Jy
! Component: 3200  -  total flux cleaned = 0.000419197 Jy
! Component: 3250  -  total flux cleaned = 0.000371457 Jy
! Component: 3300  -  total flux cleaned = 0.000355627 Jy
! Component: 3350  -  total flux cleaned = 0.000355618 Jy
! Component: 3400  -  total flux cleaned = 0.000308605 Jy
! Component: 3450  -  total flux cleaned = 0.000332014 Jy
! Component: 3500  -  total flux cleaned = 0.000308746 Jy
! Component: 3550  -  total flux cleaned = 0.000301111 Jy
! Component: 3600  -  total flux cleaned = 0.000247346 Jy
! Component: 3650  -  total flux cleaned = 0.000262643 Jy
! Component: 3700  -  total flux cleaned = 0.000232157 Jy
! Component: 3750  -  total flux cleaned = 0.000232171 Jy
! Component: 3800  -  total flux cleaned = 0.000239665 Jy
! Component: 3850  -  total flux cleaned = 0.000209687 Jy
! Component: 3900  -  total flux cleaned = 0.000202287 Jy
! Component: 3950  -  total flux cleaned = 0.000187404 Jy
! Component: 4000  -  total flux cleaned = 0.000165214 Jy
! Component: 4050  -  total flux cleaned = 0.000157891 Jy
! Total flux subtracted in 4096 components = 0.0001579 Jy
! Clean residual min=-0.000425 max=0.000455 Jy/beam
! Clean residual mean=0.000000 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0994441 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 460 components and 0.0994441 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0851+0845_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8588 x 1.923 at -2.599 degrees (North through East)
! Clean map  min=-0.00081673  max=0.043914 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0851+0845_X_map.fits
wmodel /vlbi/uf001/uva//J0851+0845_X_map.mod
! Writing 460 model components to file: /vlbi/uf001/uva//J0851+0845_X_map.mod
wobs   /vlbi/uf001/uva//J0851+0845_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0851+0845_X_uvs.fits
wwins  /vlbi/uf001/uva//J0851+0845_X_map.win
! wwins: Wrote 9 windows to /vlbi/uf001/uva//J0851+0845_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.043914 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000126934 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.867154 0.867154 1.73431 3.46862 6.93723 13.8745 27.7489 55.4979
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.043 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  345.959 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0851+0845_X_dfm.log closed on Mon Jan 14 00:08:41 2019