! Started logfile: /vlbi/uf001/uva//J0847+4609_S_dfm.log on Mon Jan 14 00:06:32 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0847+4609_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0847+4609_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.960317 visibilities/baseline/integration-bin.
! Found source: J0847+4609
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5445 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0847+4609_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.038901Jy  sigma=22.060860
! Fit after  self-cal, rms=0.733974Jy  sigma=15.627153
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=4.587 mas, bpa=10.78 degrees
! Estimated noise=0.665703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.201407 Jy
! Component: 100  -  total flux cleaned = 0.258368 Jy
! Total flux subtracted in 100 components = 0.258368 Jy
! Clean residual min=-0.007235 max=0.023147 Jy/beam
! Clean residual mean=0.000003 rms=0.002352 Jy/beam
! Combined flux in latest and established models = 0.258368 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.258368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074034Jy  sigma=1.515409
! Fit after  self-cal, rms=0.073752Jy  sigma=1.509286
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0255232 Jy
! Component: 100  -  total flux cleaned = 0.0392866 Jy
! Total flux subtracted in 100 components = 0.0392866 Jy
! Clean residual min=-0.005016 max=0.009590 Jy/beam
! Clean residual mean=0.000005 rms=0.001385 Jy/beam
! Combined flux in latest and established models = 0.297654 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 26 components and 0.297654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062595Jy  sigma=1.271793
! Fit after  self-cal, rms=0.062459Jy  sigma=1.268940
! Inverting map 
! Added new window around map position (3, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101098 Jy
! Component: 100  -  total flux cleaned = 0.0168134 Jy
! Total flux subtracted in 100 components = 0.0168134 Jy
! Clean residual min=-0.004726 max=0.004903 Jy/beam
! Clean residual mean=0.000004 rms=0.001133 Jy/beam
! Combined flux in latest and established models = 0.314468 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 36 components and 0.314468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060292Jy  sigma=1.223069
! Fit after  self-cal, rms=0.060216Jy  sigma=1.221368
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.78 mas, bmaj=5.29 mas, bpa=10.22 degrees
! Estimated noise=0.495393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00704079 Jy
! Component: 100  -  total flux cleaned = 0.0114676 Jy
! Component: 150  -  total flux cleaned = 0.0145955 Jy
! Component: 200  -  total flux cleaned = 0.0168787 Jy
! Total flux subtracted in 200 components = 0.0168787 Jy
! Clean residual min=-0.004122 max=0.003784 Jy/beam
! Clean residual mean=0.000000 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.331346 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 58 components and 0.331346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059241Jy  sigma=1.200892
! Fit after  self-cal, rms=0.059203Jy  sigma=1.200017
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.78 x 5.29 at 10.22 degrees (North through East)
! Clean map  min=-0.0041474  max=0.25919 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.95     MK        0.97     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.95     MK        0.97     NL        1.04     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.01     KP        1.01     
!   LA        0.97     MK        1.01     NL        1.05     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.059203Jy  sigma=1.200017
! Fit after  self-cal, rms=0.058260Jy  sigma=1.179967
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.78 mas, bmaj=5.297 mas, bpa=9.912 degrees
! Estimated noise=0.495939 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000134254 Jy
! Component: 100  -  total flux cleaned = -0.000179027 Jy
! Component: 150  -  total flux cleaned = -0.000145989 Jy
! Component: 200  -  total flux cleaned = -0.00021201 Jy
! Total flux subtracted in 200 components = -0.00021201 Jy
! Clean residual min=-0.003324 max=0.003102 Jy/beam
! Clean residual mean=0.000004 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.331134 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 0.331134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058189Jy  sigma=1.178848
! Fit after  self-cal, rms=0.058181Jy  sigma=1.178717
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058181Jy  sigma=1.178717
! Fit after  self-cal, rms=0.056352Jy  sigma=1.151673
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.777 mas, bmaj=5.304 mas, bpa=10.02 degrees
! Estimated noise=0.496712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145519 Jy
! Component: 100  -  total flux cleaned = 6.40956e-05 Jy
! Component: 150  -  total flux cleaned = 9.98335e-05 Jy
! Component: 200  -  total flux cleaned = 7.13397e-05 Jy
! Total flux subtracted in 200 components = 7.13397e-05 Jy
! Clean residual min=-0.002578 max=0.002688 Jy/beam
! Clean residual mean=-0.000001 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.331206 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 74 components and 0.331206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056309Jy  sigma=1.150665
! Fit after  self-cal, rms=0.056301Jy  sigma=1.150545
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (43, -72.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112039 Jy
! Component: 100  -  total flux cleaned = 0.000568375 Jy
! Component: 150  -  total flux cleaned = 0.000428733 Jy
! Component: 200  -  total flux cleaned = 0.000343044 Jy
! Total flux subtracted in 200 components = 0.000343044 Jy
! Clean residual min=-0.002661 max=0.002319 Jy/beam
! Clean residual mean=-0.000000 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.331549 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 93 components and 0.331549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056176Jy  sigma=1.147876
! Fit after  self-cal, rms=0.056174Jy  sigma=1.147788
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056174Jy  sigma=1.147788
! Fit after  self-cal, rms=0.056070Jy  sigma=1.146019
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.777 mas, bmaj=5.298 mas, bpa=9.962 degrees
! Estimated noise=0.496845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000459396 Jy
! Component: 100  -  total flux cleaned = 0.000389279 Jy
! Component: 150  -  total flux cleaned = 0.000389419 Jy
! Component: 200  -  total flux cleaned = 0.000358108 Jy
! Total flux subtracted in 200 components = 0.000358108 Jy
! Clean residual min=-0.002632 max=0.002259 Jy/beam
! Clean residual mean=0.000001 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.331907 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 100 components and 0.331907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056028Jy  sigma=1.145126
! Fit after  self-cal, rms=0.056027Jy  sigma=1.145091
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.32513e-05 Jy
! Component: 100  -  total flux cleaned = -1.3499e-05 Jy
! Component: 150  -  total flux cleaned = -4.05245e-05 Jy
! Component: 200  -  total flux cleaned = -6.63352e-05 Jy
! Total flux subtracted in 200 components = -6.63352e-05 Jy
! Clean residual min=-0.002572 max=0.002243 Jy/beam
! Clean residual mean=0.000001 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.331841 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 103 components and 0.331841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056003Jy  sigma=1.144570
! Fit after  self-cal, rms=0.056001Jy  sigma=1.144548
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056001Jy  sigma=1.144548
! Fit after  self-cal, rms=0.056033Jy  sigma=1.144505
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.634 mas, bmaj=8.949 mas, bpa=13.91 degrees
! Estimated noise=0.627557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131023 Jy
! Component: 100  -  total flux cleaned = -1.50109e-05 Jy
! Component: 150  -  total flux cleaned = -0.000217475 Jy
! Component: 200  -  total flux cleaned = -0.000302515 Jy
! Total flux subtracted in 200 components = -0.000302515 Jy
! Clean residual min=-0.002475 max=0.002371 Jy/beam
! Clean residual mean=0.000000 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.331538 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 115 components and 0.331538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056030Jy  sigma=1.144422
! Fit after  self-cal, rms=0.056027Jy  sigma=1.144354
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.65172e-05 Jy
! Component: 100  -  total flux cleaned = -6.16436e-05 Jy
! Component: 150  -  total flux cleaned = -9.13546e-05 Jy
! Component: 200  -  total flux cleaned = -0.00011904 Jy
! Total flux subtracted in 200 components = -0.00011904 Jy
! Clean residual min=-0.002438 max=0.002374 Jy/beam
! Clean residual mean=0.000000 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.331419 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 121 components and 0.331419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056022Jy  sigma=1.144259
! Fit after  self-cal, rms=0.056020Jy  sigma=1.144212
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.776 mas, bmaj=5.295 mas, bpa=9.918 degrees
! Estimated noise=0.497165 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.776 x 5.295 at 9.918 degrees (North through East)
! Clean map  min=-0.002446  max=0.25958 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.217 mas, bmaj=4.579 mas, bpa=10.59 degrees
! Estimated noise=0.668033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.20214 Jy
! Component: 100  -  total flux cleaned = 0.261091 Jy
! Component: 150  -  total flux cleaned = 0.286685 Jy
! Component: 200  -  total flux cleaned = 0.300167 Jy
! Total flux subtracted in 200 components = 0.300167 Jy
! Clean residual min=-0.003877 max=0.007120 Jy/beam
! Clean residual mean=0.000003 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.300167 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.300167 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.776 mas, bmaj=5.295 mas, bpa=9.918 degrees
! Estimated noise=0.497165 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108147 Jy
! Component: 100  -  total flux cleaned = 0.0176481 Jy
! Component: 150  -  total flux cleaned = 0.022208 Jy
! Component: 200  -  total flux cleaned = 0.0255212 Jy
! Total flux subtracted in 200 components = 0.0255212 Jy
! Clean residual min=-0.002818 max=0.003066 Jy/beam
! Clean residual mean=0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.325688 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 49 components and 0.325688 Jy
! Inverting map 
! Added new window around map position (-1.5, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293226 Jy
! Component: 100  -  total flux cleaned = 0.00382429 Jy
! Component: 150  -  total flux cleaned = 0.00429852 Jy
! Component: 200  -  total flux cleaned = 0.00470395 Jy
! Total flux subtracted in 200 components = 0.00470395 Jy
! Clean residual min=-0.002610 max=0.002276 Jy/beam
! Clean residual mean=0.000001 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.330392 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.330392 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.634 mas, bmaj=8.949 mas, bpa=13.91 degrees
! Estimated noise=0.627557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000586669 Jy
! Component: 100  -  total flux cleaned = 0.000666912 Jy
! Component: 150  -  total flux cleaned = 0.000696937 Jy
! Component: 200  -  total flux cleaned = 0.000748167 Jy
! Total flux subtracted in 200 components = 0.000748167 Jy
! Clean residual min=-0.002422 max=0.002341 Jy/beam
! Clean residual mean=0.000000 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.33114 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.3935e-06 Jy
! Component: 100  -  total flux cleaned = 2.24915e-05 Jy
! Component: 150  -  total flux cleaned = 4.04228e-05 Jy
! Component: 200  -  total flux cleaned = 2.29003e-05 Jy
! Total flux subtracted in 200 components = 2.29003e-05 Jy
! Clean residual min=-0.002399 max=0.002320 Jy/beam
! Clean residual mean=0.000000 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.331163 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.331163 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.776 mas, bmaj=5.295 mas, bpa=9.918 degrees
! Estimated noise=0.497165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258557 Jy
! Component: 100  -  total flux cleaned = -0.000186998 Jy
! Component: 150  -  total flux cleaned = -0.000151841 Jy
! Component: 200  -  total flux cleaned = -8.69084e-05 Jy
! Total flux subtracted in 200 components = -8.69084e-05 Jy
! Clean residual min=-0.002567 max=0.002163 Jy/beam
! Clean residual mean=-0.000000 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.331076 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 99 components and 0.331076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056028Jy  sigma=1.144146
! Fit after  self-cal, rms=0.056015Jy  sigma=1.143911
wmodel J0847+4609_S_map.mod
! Writing 99 model components to file: J0847+4609_S_map.mod
wobs   J0847+4609_S_uvs.fits
! Writing UV FITS file: J0847+4609_S_uvs.fits
wwins  J0847+4609_S_map.win
! wwins: Wrote 4 windows to J0847+4609_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.71737e-05 Jy
! Component: 100  -  total flux cleaned = 0.000498571 Jy
! Component: 150  -  total flux cleaned = 0.000882918 Jy
! Component: 200  -  total flux cleaned = 0.00118356 Jy
! Component: 250  -  total flux cleaned = 0.00147096 Jy
! Component: 300  -  total flux cleaned = 0.00156264 Jy
! Component: 350  -  total flux cleaned = 0.00162242 Jy
! Component: 400  -  total flux cleaned = 0.00182666 Jy
! Component: 450  -  total flux cleaned = 0.00191217 Jy
! Component: 500  -  total flux cleaned = 0.00199647 Jy
! Component: 550  -  total flux cleaned = 0.00210585 Jy
! Component: 600  -  total flux cleaned = 0.00213263 Jy
! Component: 650  -  total flux cleaned = 0.00226445 Jy
! Component: 700  -  total flux cleaned = 0.00236777 Jy
! Component: 750  -  total flux cleaned = 0.00239348 Jy
! Component: 800  -  total flux cleaned = 0.00251804 Jy
! Component: 850  -  total flux cleaned = 0.00254249 Jy
! Component: 900  -  total flux cleaned = 0.00256657 Jy
! Component: 950  -  total flux cleaned = 0.00261403 Jy
! Component: 1000  -  total flux cleaned = 0.00268439 Jy
! Component: 1050  -  total flux cleaned = 0.00270763 Jy
! Component: 1100  -  total flux cleaned = 0.00282142 Jy
! Component: 1150  -  total flux cleaned = 0.00275332 Jy
! Component: 1200  -  total flux cleaned = 0.00275322 Jy
! Component: 1250  -  total flux cleaned = 0.00273134 Jy
! Component: 1300  -  total flux cleaned = 0.00279662 Jy
! Component: 1350  -  total flux cleaned = 0.00268909 Jy
! Component: 1400  -  total flux cleaned = 0.00271032 Jy
! Component: 1450  -  total flux cleaned = 0.00266856 Jy
! Component: 1500  -  total flux cleaned = 0.00268936 Jy
! Component: 1550  -  total flux cleaned = 0.00273053 Jy
! Component: 1600  -  total flux cleaned = 0.00277106 Jy
! Component: 1650  -  total flux cleaned = 0.00271082 Jy
! Component: 1700  -  total flux cleaned = 0.00279021 Jy
! Component: 1750  -  total flux cleaned = 0.00277076 Jy
! Component: 1800  -  total flux cleaned = 0.00280976 Jy
! Component: 1850  -  total flux cleaned = 0.00290622 Jy
! Component: 1900  -  total flux cleaned = 0.00292533 Jy
! Component: 1950  -  total flux cleaned = 0.00294464 Jy
! Component: 2000  -  total flux cleaned = 0.00303849 Jy
! Component: 2050  -  total flux cleaned = 0.00302001 Jy
! Component: 2100  -  total flux cleaned = 0.00307526 Jy
! Component: 2150  -  total flux cleaned = 0.00318454 Jy
! Component: 2200  -  total flux cleaned = 0.00318423 Jy
! Component: 2250  -  total flux cleaned = 0.00321997 Jy
! Component: 2300  -  total flux cleaned = 0.00321978 Jy
! Component: 2350  -  total flux cleaned = 0.00327233 Jy
! Component: 2400  -  total flux cleaned = 0.00322005 Jy
! Component: 2450  -  total flux cleaned = 0.00332391 Jy
! Component: 2500  -  total flux cleaned = 0.00342665 Jy
! Component: 2550  -  total flux cleaned = 0.00330747 Jy
! Component: 2600  -  total flux cleaned = 0.00339212 Jy
! Component: 2650  -  total flux cleaned = 0.00340897 Jy
! Component: 2700  -  total flux cleaned = 0.00342576 Jy
! Component: 2750  -  total flux cleaned = 0.00344223 Jy
! Component: 2800  -  total flux cleaned = 0.00347513 Jy
! Component: 2850  -  total flux cleaned = 0.00347521 Jy
! Component: 2900  -  total flux cleaned = 0.00353971 Jy
! Component: 2950  -  total flux cleaned = 0.00357172 Jy
! Component: 3000  -  total flux cleaned = 0.00361934 Jy
! Component: 3050  -  total flux cleaned = 0.00360349 Jy
! Component: 3100  -  total flux cleaned = 0.00363491 Jy
! Component: 3150  -  total flux cleaned = 0.0036817 Jy
! Component: 3200  -  total flux cleaned = 0.00371295 Jy
! Component: 3250  -  total flux cleaned = 0.00375899 Jy
! Component: 3300  -  total flux cleaned = 0.00383521 Jy
! Component: 3350  -  total flux cleaned = 0.00386554 Jy
! Component: 3400  -  total flux cleaned = 0.00388046 Jy
! Component: 3450  -  total flux cleaned = 0.00393998 Jy
! Component: 3500  -  total flux cleaned = 0.00395473 Jy
! Component: 3550  -  total flux cleaned = 0.00398408 Jy
! Component: 3600  -  total flux cleaned = 0.00396917 Jy
! Component: 3650  -  total flux cleaned = 0.00394013 Jy
! Component: 3700  -  total flux cleaned = 0.00399804 Jy
! Component: 3750  -  total flux cleaned = 0.0040701 Jy
! Component: 3800  -  total flux cleaned = 0.00407007 Jy
! Component: 3850  -  total flux cleaned = 0.00399892 Jy
! Component: 3900  -  total flux cleaned = 0.0040556 Jy
! Component: 3950  -  total flux cleaned = 0.0040695 Jy
! Component: 4000  -  total flux cleaned = 0.00405546 Jy
! Component: 4050  -  total flux cleaned = 0.00406931 Jy
! Total flux subtracted in 4096 components = 0.0040556 Jy
! Clean residual min=-0.000950 max=0.000770 Jy/beam
! Clean residual mean=-0.000001 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.335132 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 404 components and 0.335132 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0847+4609_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.776 x 5.295 at 9.918 degrees (North through East)
! Clean map  min=-0.0017681  max=0.26005 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0847+4609_S_map.fits
wmodel /vlbi/uf001/uva//J0847+4609_S_map.mod
! Writing 404 model components to file: /vlbi/uf001/uva//J0847+4609_S_map.mod
wobs   /vlbi/uf001/uva//J0847+4609_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0847+4609_S_uvs.fits
wwins  /vlbi/uf001/uva//J0847+4609_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0847+4609_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.260045 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000251167 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.289758 0.289758 0.579515 1.15903 2.31806 4.63612 9.27224 18.5445 37.089 74.1779
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.26 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1035.35 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0847+4609_S_dfm.log closed on Mon Jan 14 00:06:37 2019