! Started logfile: /vlbi/uf001/uva//J0846-3424_S_dfm.log on Mon Jan 14 00:06:09 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0846-3424_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0846-3424_S_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.796491 visibilities/baseline/integration-bin. ! Found source: J0846-3424 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4086 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0846-3424_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017320Jy sigma=15.146361 ! Fit after self-cal, rms=0.865793Jy sigma=12.622699 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=8.515 mas, bpa=-0.9186 degrees ! Estimated noise=1.01381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106938 Jy ! Component: 100 - total flux cleaned = 0.145709 Jy ! Total flux subtracted in 100 components = 0.145709 Jy ! Clean residual min=-0.012068 max=0.021802 Jy/beam ! Clean residual mean=-0.000015 rms=0.003808 Jy/beam ! Combined flux in latest and established models = 0.145709 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.145709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.119709Jy sigma=1.617566 ! Fit after self-cal, rms=0.119321Jy sigma=1.613349 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=9.9 mas, bpa=-0.4341 degrees ! Estimated noise=0.78031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344996 Jy ! Component: 100 - total flux cleaned = 0.053253 Jy ! Component: 150 - total flux cleaned = 0.0635819 Jy ! Component: 200 - total flux cleaned = 0.0692774 Jy ! Total flux subtracted in 200 components = 0.0692774 Jy ! Clean residual min=-0.010067 max=0.014925 Jy/beam ! Clean residual mean=-0.000147 rms=0.002797 Jy/beam ! Combined flux in latest and established models = 0.214986 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 0.214986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.112445Jy sigma=1.406544 ! Fit after self-cal, rms=0.112385Jy sigma=1.404372 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 9.9 at -0.4341 degrees (North through East) ! Clean map min=-0.009517 max=0.12549 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 1.69 KP 0.95 ! LA 0.90 MK 1.05 NL 1.20 OV 0.93 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.68 FD 0.92 HN 1.70 KP 0.92 ! LA 0.96 MK 1.15 NL 1.23 OV 0.89 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 0.91 HN 1.53 KP 0.97 ! LA 0.89 MK 1.06 NL 1.24 OV 0.95 ! PT 0.93 SC 0.96 ! ! ! Fit before self-cal, rms=0.112385Jy sigma=1.404372 ! Fit after self-cal, rms=0.172586Jy sigma=1.314661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=10.04 mas, bpa=1.062 degrees ! Estimated noise=0.810587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180503 Jy ! Component: 100 - total flux cleaned = 9.48444e-06 Jy ! Component: 150 - total flux cleaned = -6.39697e-05 Jy ! Component: 200 - total flux cleaned = -0.000208002 Jy ! Total flux subtracted in 200 components = -0.000208002 Jy ! Clean residual min=-0.005518 max=0.005023 Jy/beam ! Clean residual mean=-0.000001 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.214778 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.214778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.172475Jy sigma=1.313234 ! Fit after self-cal, rms=0.173754Jy sigma=1.311769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.173754Jy sigma=1.311769 ! Fit after self-cal, rms=0.193194Jy sigma=1.304477 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=10.18 mas, bpa=0.977 degrees ! Estimated noise=0.810884 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.3238e-05 Jy ! Component: 100 - total flux cleaned = 9.06307e-05 Jy ! Component: 150 - total flux cleaned = 0.000140187 Jy ! Component: 200 - total flux cleaned = 0.000184414 Jy ! Total flux subtracted in 200 components = 0.000184414 Jy ! Clean residual min=-0.004779 max=0.004436 Jy/beam ! Clean residual mean=-0.000007 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.214963 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.214963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193161Jy sigma=1.304004 ! Fit after self-cal, rms=0.193252Jy sigma=1.303851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.99267e-05 Jy ! Component: 100 - total flux cleaned = 3.66027e-06 Jy ! Component: 150 - total flux cleaned = 2.54669e-06 Jy ! Component: 200 - total flux cleaned = 3.70936e-06 Jy ! Total flux subtracted in 200 components = 3.70936e-06 Jy ! Clean residual min=-0.004709 max=0.004379 Jy/beam ! Clean residual mean=-0.000007 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.214966 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 63 components and 0.214966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193230Jy sigma=1.303570 ! Fit after self-cal, rms=0.193230Jy sigma=1.303548 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193230Jy sigma=1.303548 ! Fit after self-cal, rms=0.193428Jy sigma=1.303457 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=10.12 mas, bpa=0.7415 degrees ! Estimated noise=0.807619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.42446e-05 Jy ! Component: 100 - total flux cleaned = 0.000169235 Jy ! Component: 150 - total flux cleaned = 0.000205522 Jy ! Component: 200 - total flux cleaned = 0.000237884 Jy ! Total flux subtracted in 200 components = 0.000237884 Jy ! Clean residual min=-0.004643 max=0.004251 Jy/beam ! Clean residual mean=-0.000008 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.215204 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 63 components and 0.215204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193410Jy sigma=1.303211 ! Fit after self-cal, rms=0.193403Jy sigma=1.303190 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.8243e-05 Jy ! Component: 100 - total flux cleaned = -3.95303e-05 Jy ! Component: 150 - total flux cleaned = -3.77233e-05 Jy ! Component: 200 - total flux cleaned = -1.12967e-05 Jy ! Total flux subtracted in 200 components = -1.12967e-05 Jy ! Clean residual min=-0.004596 max=0.004207 Jy/beam ! Clean residual mean=-0.000007 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.215193 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.215193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193391Jy sigma=1.303062 ! Fit after self-cal, rms=0.193388Jy sigma=1.303047 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193388Jy sigma=1.303047 ! Fit after self-cal, rms=0.193479Jy sigma=1.302990 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.133 mas, bmaj=23.63 mas, bpa=-0.5308 degrees ! Estimated noise=0.968192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127863 Jy ! Component: 100 - total flux cleaned = 0.00128268 Jy ! Component: 150 - total flux cleaned = 0.00125097 Jy ! Component: 200 - total flux cleaned = 0.0011991 Jy ! Total flux subtracted in 200 components = 0.0011991 Jy ! Clean residual min=-0.003737 max=0.004326 Jy/beam ! Clean residual mean=-0.000012 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.216392 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 68 components and 0.216392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193487Jy sigma=1.303400 ! Fit after self-cal, rms=0.193464Jy sigma=1.303177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302562 Jy ! Component: 100 - total flux cleaned = 0.000268833 Jy ! Component: 150 - total flux cleaned = 0.000217421 Jy ! Component: 200 - total flux cleaned = 0.000195361 Jy ! Total flux subtracted in 200 components = 0.000195361 Jy ! Clean residual min=-0.003764 max=0.004261 Jy/beam ! Clean residual mean=-0.000012 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.216587 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 75 components and 0.216587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193474Jy sigma=1.303539 ! Fit after self-cal, rms=0.193462Jy sigma=1.303454 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=10.07 mas, bpa=0.5968 degrees ! Estimated noise=0.805544 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 10.07 at 0.5968 degrees (North through East) ! Clean map min=-0.0042479 max=0.13177 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=8.589 mas, bpa=0.2937 degrees ! Estimated noise=1.07144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111707 Jy ! Component: 100 - total flux cleaned = 0.152583 Jy ! Component: 150 - total flux cleaned = 0.175106 Jy ! Component: 200 - total flux cleaned = 0.18892 Jy ! Total flux subtracted in 200 components = 0.18892 Jy ! Clean residual min=-0.007633 max=0.010100 Jy/beam ! Clean residual mean=0.000003 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.18892 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.18892 Jy ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=10.07 mas, bpa=0.5968 degrees ! Estimated noise=0.805544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131861 Jy ! Component: 100 - total flux cleaned = 0.0202069 Jy ! Component: 150 - total flux cleaned = 0.0235436 Jy ! Component: 200 - total flux cleaned = 0.0245339 Jy ! Total flux subtracted in 200 components = 0.0245339 Jy ! Clean residual min=-0.004421 max=0.004082 Jy/beam ! Clean residual mean=-0.000010 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.213454 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 93 components and 0.213454 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.133 mas, bmaj=23.63 mas, bpa=-0.5308 degrees ! Estimated noise=0.968192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221441 Jy ! Component: 100 - total flux cleaned = 0.00238146 Jy ! Component: 150 - total flux cleaned = 0.00242135 Jy ! Component: 200 - total flux cleaned = 0.00241988 Jy ! Total flux subtracted in 200 components = 0.00241988 Jy ! Clean residual min=-0.003827 max=0.004340 Jy/beam ! Clean residual mean=-0.000017 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.215874 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.03221e-08 Jy ! Component: 100 - total flux cleaned = -8.69422e-07 Jy ! Component: 150 - total flux cleaned = -1.28813e-07 Jy ! Component: 200 - total flux cleaned = 1.42184e-05 Jy ! Total flux subtracted in 200 components = 1.42184e-05 Jy ! Clean residual min=-0.003797 max=0.004335 Jy/beam ! Clean residual mean=-0.000018 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.215888 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 119 components and 0.215888 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=10.07 mas, bpa=0.5968 degrees ! Estimated noise=0.805544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246738 Jy ! Component: 100 - total flux cleaned = -0.00028494 Jy ! Component: 150 - total flux cleaned = -0.000248139 Jy ! Component: 200 - total flux cleaned = -0.0002483 Jy ! Total flux subtracted in 200 components = -0.0002483 Jy ! Clean residual min=-0.004193 max=0.003990 Jy/beam ! Clean residual mean=-0.000010 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.21564 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 141 components and 0.21564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.193199Jy sigma=1.300225 ! Fit after self-cal, rms=0.193233Jy sigma=1.299440 wmodel J0846-3424_S_map.mod ! Writing 141 model components to file: J0846-3424_S_map.mod wobs J0846-3424_S_uvs.fits ! Writing UV FITS file: J0846-3424_S_uvs.fits wwins J0846-3424_S_map.win ! wwins: Wrote 2 windows to J0846-3424_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000952296 Jy ! Component: 100 - total flux cleaned = -0.0015343 Jy ! Component: 150 - total flux cleaned = -0.00183878 Jy ! Component: 200 - total flux cleaned = -0.00189866 Jy ! Component: 250 - total flux cleaned = -0.00195654 Jy ! Component: 300 - total flux cleaned = -0.00211766 Jy ! Component: 350 - total flux cleaned = -0.00227196 Jy ! Component: 400 - total flux cleaned = -0.00237082 Jy ! Component: 450 - total flux cleaned = -0.00241903 Jy ! Component: 500 - total flux cleaned = -0.00256015 Jy ! Component: 550 - total flux cleaned = -0.00260592 Jy ! Component: 600 - total flux cleaned = -0.00265069 Jy ! Component: 650 - total flux cleaned = -0.00251879 Jy ! Component: 700 - total flux cleaned = -0.00251877 Jy ! Component: 750 - total flux cleaned = -0.00256 Jy ! Component: 800 - total flux cleaned = -0.00239458 Jy ! Component: 850 - total flux cleaned = -0.00243566 Jy ! Component: 900 - total flux cleaned = -0.00235569 Jy ! Component: 950 - total flux cleaned = -0.00231583 Jy ! Component: 1000 - total flux cleaned = -0.0022389 Jy ! Component: 1050 - total flux cleaned = -0.0023149 Jy ! Component: 1100 - total flux cleaned = -0.00216545 Jy ! Component: 1150 - total flux cleaned = -0.00220265 Jy ! Component: 1200 - total flux cleaned = -0.0021663 Jy ! Component: 1250 - total flux cleaned = -0.00216673 Jy ! Component: 1300 - total flux cleaned = -0.00213115 Jy ! Component: 1350 - total flux cleaned = -0.00209614 Jy ! Component: 1400 - total flux cleaned = -0.00192387 Jy ! Component: 1450 - total flux cleaned = -0.00199136 Jy ! Component: 1500 - total flux cleaned = -0.00192391 Jy ! Component: 1550 - total flux cleaned = -0.00185748 Jy ! Component: 1600 - total flux cleaned = -0.00179199 Jy ! Component: 1650 - total flux cleaned = -0.00179162 Jy ! Component: 1700 - total flux cleaned = -0.0017914 Jy ! Component: 1750 - total flux cleaned = -0.00176012 Jy ! Component: 1800 - total flux cleaned = -0.00172846 Jy ! Component: 1850 - total flux cleaned = -0.00169758 Jy ! Component: 1900 - total flux cleaned = -0.00166695 Jy ! Component: 1950 - total flux cleaned = -0.00169738 Jy ! Component: 2000 - total flux cleaned = -0.00160721 Jy ! Component: 2050 - total flux cleaned = -0.00157762 Jy ! Component: 2100 - total flux cleaned = -0.00157725 Jy ! Component: 2150 - total flux cleaned = -0.00151851 Jy ! Component: 2200 - total flux cleaned = -0.00143139 Jy ! Component: 2250 - total flux cleaned = -0.00143084 Jy ! Component: 2300 - total flux cleaned = -0.00128766 Jy ! Component: 2350 - total flux cleaned = -0.00128778 Jy ! Component: 2400 - total flux cleaned = -0.00120352 Jy ! Component: 2450 - total flux cleaned = -0.00117565 Jy ! Component: 2500 - total flux cleaned = -0.00112023 Jy ! Component: 2550 - total flux cleaned = -0.00101018 Jy ! Component: 2600 - total flux cleaned = -0.000901105 Jy ! Component: 2650 - total flux cleaned = -0.000846965 Jy ! Component: 2700 - total flux cleaned = -0.000792987 Jy ! Component: 2750 - total flux cleaned = -0.000739062 Jy ! Component: 2800 - total flux cleaned = -0.000526134 Jy ! Component: 2850 - total flux cleaned = -0.000473506 Jy ! Component: 2900 - total flux cleaned = -0.000394674 Jy ! Component: 2950 - total flux cleaned = -0.000211884 Jy ! Component: 3000 - total flux cleaned = -0.000185959 Jy ! Component: 3050 - total flux cleaned = -0.000160027 Jy ! Component: 3100 - total flux cleaned = -3.19537e-05 Jy ! Component: 3150 - total flux cleaned = -3.20215e-05 Jy ! Component: 3200 - total flux cleaned = 6.94214e-05 Jy ! Component: 3250 - total flux cleaned = 0.00011998 Jy ! Component: 3300 - total flux cleaned = 0.000245293 Jy ! Component: 3350 - total flux cleaned = 0.000395095 Jy ! Component: 3400 - total flux cleaned = 0.000420065 Jy ! Component: 3450 - total flux cleaned = 0.000543541 Jy ! Component: 3500 - total flux cleaned = 0.000666284 Jy ! Component: 3550 - total flux cleaned = 0.000788609 Jy ! Component: 3600 - total flux cleaned = 0.000909876 Jy ! Component: 3650 - total flux cleaned = 0.000982264 Jy ! Component: 3700 - total flux cleaned = 0.00105432 Jy ! Component: 3750 - total flux cleaned = 0.00122192 Jy ! Component: 3800 - total flux cleaned = 0.00129329 Jy ! Component: 3850 - total flux cleaned = 0.00143522 Jy ! Component: 3900 - total flux cleaned = 0.00152953 Jy ! Component: 3950 - total flux cleaned = 0.00159994 Jy ! Component: 4000 - total flux cleaned = 0.00171684 Jy ! Component: 4050 - total flux cleaned = 0.00174023 Jy ! Total flux subtracted in 4096 components = 0.0019256 Jy ! Clean residual min=-0.001379 max=0.001676 Jy/beam ! Clean residual mean=0.000011 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.217566 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 410 components and 0.217566 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0846-3424_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 10.07 at 0.5968 degrees (North through East) ! Clean map min=-0.0028329 max=0.13613 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0846-3424_S_map.fits wmodel /vlbi/uf001/uva//J0846-3424_S_map.mod ! Writing 410 model components to file: /vlbi/uf001/uva//J0846-3424_S_map.mod wobs /vlbi/uf001/uva//J0846-3424_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0846-3424_S_uvs.fits wwins /vlbi/uf001/uva//J0846-3424_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0846-3424_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.136127 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000412702 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.909523 0.909523 1.81905 3.63809 7.27619 14.5524 29.1047 58.2095 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.136 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 329.843 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0846-3424_S_dfm.log closed on Mon Jan 14 00:06:13 2019