! Started logfile: /vlbi/uf001/uva//J0846-2610_S_dfm.log on Mon Jan 14 00:05:57 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0846-2610_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0846-2610_S_uva.fits ! AN table 1: 78 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.997151 visibilities/baseline/integration-bin. ! Found source: J0846-2610 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 8400 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0846-2610_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.103134Jy sigma=16.083572 ! Fit after self-cal, rms=0.832336Jy sigma=12.421949 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=11.8 mas, bpa=13.87 degrees ! Estimated noise=0.923411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180797 Jy ! Component: 100 - total flux cleaned = 0.286412 Jy ! Total flux subtracted in 100 components = 0.286412 Jy ! Clean residual min=-0.054648 max=0.087202 Jy/beam ! Clean residual mean=-0.000312 rms=0.018992 Jy/beam ! Combined flux in latest and established models = 0.286412 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.286412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.396148Jy sigma=5.187361 ! Fit after self-cal, rms=0.393943Jy sigma=5.162458 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=13.04 mas, bpa=12.09 degrees ! Estimated noise=0.550628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120134 Jy ! Component: 100 - total flux cleaned = 0.189618 Jy ! Component: 150 - total flux cleaned = 0.232264 Jy ! Component: 200 - total flux cleaned = 0.259516 Jy ! Total flux subtracted in 200 components = 0.259516 Jy ! Clean residual min=-0.061349 max=0.137139 Jy/beam ! Clean residual mean=0.000002 rms=0.025810 Jy/beam ! Combined flux in latest and established models = 0.545928 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 82 components and 0.545928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.348106Jy sigma=4.611437 ! Fit after self-cal, rms=0.347402Jy sigma=4.604112 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 13.04 at 12.09 degrees (North through East) ! Clean map min=-0.06053 max=0.24355 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.16 KP 1.32 ! LA 0.91 NL 1.84 OV 0.78 PT 0.80 ! SC 0.77 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.83 HN 1.03 KP 1.23 ! LA 1.16 NL 1.58 OV 0.79 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.68 HN 1.01 KP 1.09 ! LA 1.28 NL 1.23 OV 0.98 PT 1.35 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.347402Jy sigma=4.604112 ! Fit after self-cal, rms=0.411921Jy sigma=4.388827 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=13.39 mas, bpa=13.12 degrees ! Estimated noise=0.559982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13527 Jy ! Component: 100 - total flux cleaned = 0.208889 Jy ! Component: 150 - total flux cleaned = 0.260449 Jy ! Component: 200 - total flux cleaned = 0.302926 Jy ! Total flux subtracted in 200 components = 0.302926 Jy ! Clean residual min=-0.049291 max=0.061577 Jy/beam ! Clean residual mean=-0.000060 rms=0.018179 Jy/beam ! Combined flux in latest and established models = 0.848854 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 168 components and 0.848854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.346372Jy sigma=3.515269 ! Fit after self-cal, rms=0.316352Jy sigma=3.144210 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.316352Jy sigma=3.144210 ! Fit after self-cal, rms=0.264386Jy sigma=2.528673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=13.98 mas, bpa=11.5 degrees ! Estimated noise=0.537075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0690072 Jy ! Component: 100 - total flux cleaned = 0.0840322 Jy ! Component: 150 - total flux cleaned = 0.0849947 Jy ! Component: 200 - total flux cleaned = 0.0849375 Jy ! Total flux subtracted in 200 components = 0.0849375 Jy ! Clean residual min=-0.029822 max=0.032579 Jy/beam ! Clean residual mean=-0.000265 rms=0.009665 Jy/beam ! Combined flux in latest and established models = 0.933792 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 214 components and 0.933792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.239486Jy sigma=2.131207 ! Fit after self-cal, rms=0.227653Jy sigma=2.001378 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209787 Jy ! Component: 100 - total flux cleaned = 0.0238535 Jy ! Component: 150 - total flux cleaned = 0.023963 Jy ! Component: 200 - total flux cleaned = 0.0223504 Jy ! Total flux subtracted in 200 components = 0.0223504 Jy ! Clean residual min=-0.025882 max=0.033857 Jy/beam ! Clean residual mean=-0.000308 rms=0.008210 Jy/beam ! Combined flux in latest and established models = 0.956142 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 259 components and 0.956142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.221360Jy sigma=1.913703 ! Fit after self-cal, rms=0.218105Jy sigma=1.883323 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.218105Jy sigma=1.883323 ! Fit after self-cal, rms=0.182512Jy sigma=1.698076 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=14.06 mas, bpa=12.07 degrees ! Estimated noise=0.525746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104592 Jy ! Component: 100 - total flux cleaned = 0.0100142 Jy ! Component: 150 - total flux cleaned = 0.00756588 Jy ! Component: 200 - total flux cleaned = 0.00540031 Jy ! Total flux subtracted in 200 components = 0.00540031 Jy ! Clean residual min=-0.020024 max=0.029101 Jy/beam ! Clean residual mean=0.000036 rms=0.005968 Jy/beam ! Combined flux in latest and established models = 0.961543 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 289 components and 0.961543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.179685Jy sigma=1.643153 ! Fit after self-cal, rms=0.178680Jy sigma=1.632323 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267601 Jy ! Component: 100 - total flux cleaned = 0.0317531 Jy ! Component: 150 - total flux cleaned = 0.0358851 Jy ! Component: 200 - total flux cleaned = 0.0385993 Jy ! Total flux subtracted in 200 components = 0.0385993 Jy ! Clean residual min=-0.016031 max=0.025115 Jy/beam ! Clean residual mean=0.000039 rms=0.004871 Jy/beam ! Combined flux in latest and established models = 1.00014 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 327 components and 1.00014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.173140Jy sigma=1.503049 ! Fit after self-cal, rms=0.172655Jy sigma=1.489564 ! Inverting map ! Added new window around map position (-8.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168584 Jy ! Component: 100 - total flux cleaned = 0.0229696 Jy ! Component: 150 - total flux cleaned = 0.0248631 Jy ! Component: 200 - total flux cleaned = 0.0265962 Jy ! Total flux subtracted in 200 components = 0.0265962 Jy ! Clean residual min=-0.012428 max=0.016936 Jy/beam ! Clean residual mean=0.000043 rms=0.004077 Jy/beam ! Combined flux in latest and established models = 1.02674 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 360 components and 1.02674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.168212Jy sigma=1.403348 ! Fit after self-cal, rms=0.167974Jy sigma=1.401112 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.167974Jy sigma=1.401112 ! Fit after self-cal, rms=0.153454Jy sigma=1.371199 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.384 mas, bmaj=21.52 mas, bpa=1.086 degrees ! Estimated noise=0.59317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013638 Jy ! Component: 100 - total flux cleaned = 0.0192141 Jy ! Component: 150 - total flux cleaned = 0.0226741 Jy ! Component: 200 - total flux cleaned = 0.0237999 Jy ! Total flux subtracted in 200 components = 0.0237999 Jy ! Clean residual min=-0.012340 max=0.014998 Jy/beam ! Clean residual mean=0.000095 rms=0.003931 Jy/beam ! Combined flux in latest and established models = 1.05054 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 382 components and 1.05054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.150959Jy sigma=1.324372 ! Fit after self-cal, rms=0.150663Jy sigma=1.322035 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105721 Jy ! Component: 100 - total flux cleaned = 0.00171184 Jy ! Component: 150 - total flux cleaned = 0.00200694 Jy ! Component: 200 - total flux cleaned = 0.00226937 Jy ! Total flux subtracted in 200 components = 0.00226937 Jy ! Clean residual min=-0.011040 max=0.014354 Jy/beam ! Clean residual mean=0.000080 rms=0.003623 Jy/beam ! Combined flux in latest and established models = 1.05281 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 396 components and 1.05281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.149415Jy sigma=1.306975 ! Fit after self-cal, rms=0.149310Jy sigma=1.306081 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=14.06 mas, bpa=11.48 degrees ! Estimated noise=0.527124 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.042 x 14.06 at 11.48 degrees (North through East) ! Clean map min=-0.015845 max=0.21593 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=12.32 mas, bpa=13.37 degrees ! Estimated noise=0.932728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.188471 Jy ! Component: 100 - total flux cleaned = 0.32419 Jy ! Component: 150 - total flux cleaned = 0.427975 Jy ! Component: 200 - total flux cleaned = 0.511344 Jy ! Total flux subtracted in 200 components = 0.511344 Jy ! Clean residual min=-0.035143 max=0.050218 Jy/beam ! Clean residual mean=-0.000248 rms=0.011617 Jy/beam ! Combined flux in latest and established models = 0.511344 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 79 model components to the UV plane model. ! The established model now contains 79 components and 0.511344 Jy ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=14.06 mas, bpa=11.48 degrees ! Estimated noise=0.527124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100196 Jy ! Component: 100 - total flux cleaned = 0.175099 Jy ! Component: 150 - total flux cleaned = 0.23389 Jy ! Component: 200 - total flux cleaned = 0.281351 Jy ! Total flux subtracted in 200 components = 0.281351 Jy ! Clean residual min=-0.027167 max=0.028431 Jy/beam ! Clean residual mean=-0.000037 rms=0.008341 Jy/beam ! Combined flux in latest and established models = 0.792696 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 142 components and 0.792696 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.384 mas, bmaj=21.52 mas, bpa=1.086 degrees ! Estimated noise=0.59317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579257 Jy ! Component: 100 - total flux cleaned = 0.0997742 Jy ! Component: 150 - total flux cleaned = 0.131285 Jy ! Component: 200 - total flux cleaned = 0.15559 Jy ! Total flux subtracted in 200 components = 0.15559 Jy ! Clean residual min=-0.018198 max=0.018453 Jy/beam ! Clean residual mean=0.000050 rms=0.005544 Jy/beam ! Combined flux in latest and established models = 0.948286 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190578 Jy ! Component: 100 - total flux cleaned = 0.0302107 Jy ! Component: 150 - total flux cleaned = 0.0390558 Jy ! Component: 200 - total flux cleaned = 0.046235 Jy ! Total flux subtracted in 200 components = 0.046235 Jy ! Clean residual min=-0.015093 max=0.013989 Jy/beam ! Clean residual mean=0.000065 rms=0.004016 Jy/beam ! Combined flux in latest and established models = 0.994521 Jy ! Adding 155 model components to the UV plane model. ! The established model now contains 288 components and 0.994521 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=14.06 mas, bpa=11.48 degrees ! Estimated noise=0.527124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011511 Jy ! Component: 100 - total flux cleaned = 0.0163317 Jy ! Component: 150 - total flux cleaned = 0.0204049 Jy ! Component: 200 - total flux cleaned = 0.0236481 Jy ! Total flux subtracted in 200 components = 0.0236481 Jy ! Clean residual min=-0.012158 max=0.010498 Jy/beam ! Clean residual mean=0.000039 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 1.01817 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 317 components and 1.01817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.148104Jy sigma=1.290565 ! Fit after self-cal, rms=0.146446Jy sigma=1.272336 wmodel J0846-2610_S_map.mod ! Writing 317 model components to file: J0846-2610_S_map.mod wobs J0846-2610_S_uvs.fits ! Writing UV FITS file: J0846-2610_S_uvs.fits wwins J0846-2610_S_map.win ! wwins: Wrote 4 windows to J0846-2610_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134438 Jy ! Component: 100 - total flux cleaned = 0.00169075 Jy ! Component: 150 - total flux cleaned = 0.0021475 Jy ! Component: 200 - total flux cleaned = 0.00329572 Jy ! Component: 250 - total flux cleaned = 0.00398058 Jy ! Component: 300 - total flux cleaned = 0.00398037 Jy ! Component: 350 - total flux cleaned = 0.0032254 Jy ! Component: 400 - total flux cleaned = 0.00261149 Jy ! Component: 450 - total flux cleaned = 0.00178076 Jy ! Component: 500 - total flux cleaned = 0.00143533 Jy ! Component: 550 - total flux cleaned = 0.00098649 Jy ! Component: 600 - total flux cleaned = 0.000659699 Jy ! Component: 650 - total flux cleaned = 0.000338403 Jy ! Component: 700 - total flux cleaned = 3.0226e-05 Jy ! Component: 750 - total flux cleaned = -0.000172242 Jy ! Component: 800 - total flux cleaned = -0.000169514 Jy ! Component: 850 - total flux cleaned = 2.76175e-05 Jy ! Component: 900 - total flux cleaned = 0.000124673 Jy ! Component: 950 - total flux cleaned = 0.000216081 Jy ! Component: 1000 - total flux cleaned = 3.46643e-05 Jy ! Component: 1050 - total flux cleaned = -5.62069e-05 Jy ! Component: 1100 - total flux cleaned = -0.000662708 Jy ! Component: 1150 - total flux cleaned = -0.000491211 Jy ! Component: 1200 - total flux cleaned = -0.000576208 Jy ! Component: 1250 - total flux cleaned = -0.000577428 Jy ! Component: 1300 - total flux cleaned = -0.00105977 Jy ! Component: 1350 - total flux cleaned = -0.000979619 Jy ! Component: 1400 - total flux cleaned = -0.000748328 Jy ! Component: 1450 - total flux cleaned = -0.00105497 Jy ! Component: 1500 - total flux cleaned = -0.00112935 Jy ! Component: 1550 - total flux cleaned = -0.00149682 Jy ! Component: 1600 - total flux cleaned = -0.0016405 Jy ! Component: 1650 - total flux cleaned = -0.00192421 Jy ! Component: 1700 - total flux cleaned = -0.00206334 Jy ! Component: 1750 - total flux cleaned = -0.00206437 Jy ! Component: 1800 - total flux cleaned = -0.00246916 Jy ! Component: 1850 - total flux cleaned = -0.00253524 Jy ! Component: 1900 - total flux cleaned = -0.00266761 Jy ! Component: 1950 - total flux cleaned = -0.00279697 Jy ! Component: 2000 - total flux cleaned = -0.00266924 Jy ! Component: 2050 - total flux cleaned = -0.00279522 Jy ! Component: 2100 - total flux cleaned = -0.00267146 Jy ! Component: 2150 - total flux cleaned = -0.00273141 Jy ! Component: 2200 - total flux cleaned = -0.00267119 Jy ! Component: 2250 - total flux cleaned = -0.00278968 Jy ! Component: 2300 - total flux cleaned = -0.00267192 Jy ! Component: 2350 - total flux cleaned = -0.00261428 Jy ! Component: 2400 - total flux cleaned = -0.00261429 Jy ! Component: 2450 - total flux cleaned = -0.00261397 Jy ! Component: 2500 - total flux cleaned = -0.00244661 Jy ! Component: 2550 - total flux cleaned = -0.0022809 Jy ! Component: 2600 - total flux cleaned = -0.00239008 Jy ! Component: 2650 - total flux cleaned = -0.00217282 Jy ! Component: 2700 - total flux cleaned = -0.00201236 Jy ! Component: 2750 - total flux cleaned = -0.00201284 Jy ! Component: 2800 - total flux cleaned = -0.0018029 Jy ! Component: 2850 - total flux cleaned = -0.00169916 Jy ! Component: 2900 - total flux cleaned = -0.00154469 Jy ! Component: 2950 - total flux cleaned = -0.00134127 Jy ! Component: 3000 - total flux cleaned = -0.00129088 Jy ! Component: 3050 - total flux cleaned = -0.001291 Jy ! Component: 3100 - total flux cleaned = -0.00124103 Jy ! Component: 3150 - total flux cleaned = -0.00104423 Jy ! Component: 3200 - total flux cleaned = -0.00109318 Jy ! Component: 3250 - total flux cleaned = -0.000947973 Jy ! Component: 3300 - total flux cleaned = -0.000900032 Jy ! Component: 3350 - total flux cleaned = -0.000805716 Jy ! Component: 3400 - total flux cleaned = -0.000711501 Jy ! Component: 3450 - total flux cleaned = -0.000851797 Jy ! Component: 3500 - total flux cleaned = -0.000573531 Jy ! Component: 3550 - total flux cleaned = -0.000620257 Jy ! Component: 3600 - total flux cleaned = -0.000574269 Jy ! Component: 3650 - total flux cleaned = -0.000438334 Jy ! Component: 3700 - total flux cleaned = -0.000393574 Jy ! Component: 3750 - total flux cleaned = -0.000348928 Jy ! Component: 3800 - total flux cleaned = -0.00017208 Jy ! Component: 3850 - total flux cleaned = -0.000216597 Jy ! Component: 3900 - total flux cleaned = -0.000260278 Jy ! Component: 3950 - total flux cleaned = -8.67255e-05 Jy ! Component: 4000 - total flux cleaned = -8.69951e-05 Jy ! Component: 4050 - total flux cleaned = -8.69243e-05 Jy ! Total flux subtracted in 4096 components = -0.000172498 Jy ! Clean residual min=-0.002382 max=0.002315 Jy/beam ! Clean residual mean=0.000017 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 1.018 Jy keep ! Adding 423 model components to the UV plane model. ! The established model now contains 740 components and 1.018 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0846-2610_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.042 x 14.06 at 11.48 degrees (North through East) ! Clean map min=-0.0079232 max=0.21125 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0846-2610_S_map.fits wmodel /vlbi/uf001/uva//J0846-2610_S_map.mod ! Writing 740 model components to file: /vlbi/uf001/uva//J0846-2610_S_map.mod wobs /vlbi/uf001/uva//J0846-2610_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0846-2610_S_uvs.fits wwins /vlbi/uf001/uva//J0846-2610_S_map.win ! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0846-2610_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.211248 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000894872 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27084 1.27084 2.54167 5.08334 10.1667 20.3334 40.6668 81.3335 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.211 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 236.065 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0846-2610_S_dfm.log closed on Mon Jan 14 00:06:02 2019