! Started logfile: /vlbi/uf001/uva//J0836+2728_S_dfm.log on Mon Jan 14 00:01:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0836+2728_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0836+2728_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955026 visibilities/baseline/integration-bin.
! Found source: J0836+2728
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5415 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0836+2728_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021834Jy  sigma=20.960659
! Fit after  self-cal, rms=0.748401Jy  sigma=15.363565
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=5.86 mas, bpa=1.234 degrees
! Estimated noise=0.629221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193025 Jy
! Component: 100  -  total flux cleaned = 0.242289 Jy
! Total flux subtracted in 100 components = 0.242289 Jy
! Clean residual min=-0.010639 max=0.020368 Jy/beam
! Clean residual mean=-0.000032 rms=0.002635 Jy/beam
! Combined flux in latest and established models = 0.242289 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.242289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082672Jy  sigma=1.627432
! Fit after  self-cal, rms=0.082648Jy  sigma=1.627096
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217761 Jy
! Component: 100  -  total flux cleaned = 0.0324995 Jy
! Total flux subtracted in 100 components = 0.0324995 Jy
! Clean residual min=-0.010049 max=0.017168 Jy/beam
! Clean residual mean=-0.000023 rms=0.002109 Jy/beam
! Combined flux in latest and established models = 0.274789 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.274789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076553Jy  sigma=1.501381
! Fit after  self-cal, rms=0.076524Jy  sigma=1.500997
! Inverting map 
! Added new window around map position (9, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142627 Jy
! Component: 100  -  total flux cleaned = 0.0214615 Jy
! Total flux subtracted in 100 components = 0.0214615 Jy
! Clean residual min=-0.008216 max=0.008327 Jy/beam
! Clean residual mean=-0.000015 rms=0.001805 Jy/beam
! Combined flux in latest and established models = 0.29625 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.296251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073312Jy  sigma=1.430254
! Fit after  self-cal, rms=0.073081Jy  sigma=1.425471
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.474 mas, bmaj=6.597 mas, bpa=1.018 degrees
! Estimated noise=0.517322 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00880147 Jy
! Component: 100  -  total flux cleaned = 0.0143772 Jy
! Component: 150  -  total flux cleaned = 0.0182821 Jy
! Component: 200  -  total flux cleaned = 0.020191 Jy
! Total flux subtracted in 200 components = 0.020191 Jy
! Clean residual min=-0.009273 max=0.007934 Jy/beam
! Clean residual mean=-0.000006 rms=0.001869 Jy/beam
! Combined flux in latest and established models = 0.316442 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 0.316442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071788Jy  sigma=1.399871
! Fit after  self-cal, rms=0.071698Jy  sigma=1.397926
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.474 x 6.597 at 1.018 degrees (North through East)
! Clean map  min=-0.0091292  max=0.24957 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.99     KP        1.02     
!   LA        0.96     MK        1.03     NL        1.06     OV        0.93     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.99     HN        0.99     KP        1.04     
!   LA        0.98     MK        1.00     NL        1.13     OV        0.79     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.95     KP        1.02     
!   LA        0.97     MK        1.01     NL        1.03     OV        0.91     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.071698Jy  sigma=1.397926
! Fit after  self-cal, rms=0.068001Jy  sigma=1.310184
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.482 mas, bmaj=6.664 mas, bpa=0.9913 degrees
! Estimated noise=0.517777 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198211 Jy
! Component: 100  -  total flux cleaned = -0.00269952 Jy
! Component: 150  -  total flux cleaned = -0.00298742 Jy
! Component: 200  -  total flux cleaned = -0.0032386 Jy
! Total flux subtracted in 200 components = -0.0032386 Jy
! Clean residual min=-0.005885 max=0.006022 Jy/beam
! Clean residual mean=0.000003 rms=0.001401 Jy/beam
! Combined flux in latest and established models = 0.313203 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 60 components and 0.313203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067708Jy  sigma=1.305523
! Fit after  self-cal, rms=0.067726Jy  sigma=1.304950
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067726Jy  sigma=1.304950
! Fit after  self-cal, rms=0.065114Jy  sigma=1.208325
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.49 mas, bmaj=6.649 mas, bpa=0.9511 degrees
! Estimated noise=0.518271 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000489019 Jy
! Component: 100  -  total flux cleaned = -0.000856219 Jy
! Component: 150  -  total flux cleaned = -0.00100881 Jy
! Component: 200  -  total flux cleaned = -0.00113961 Jy
! Total flux subtracted in 200 components = -0.00113961 Jy
! Clean residual min=-0.002497 max=0.002784 Jy/beam
! Clean residual mean=0.000001 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.312063 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.312063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065022Jy  sigma=1.206132
! Fit after  self-cal, rms=0.065064Jy  sigma=1.205770
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25.5, 104).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137658 Jy
! Component: 100  -  total flux cleaned = 0.00167146 Jy
! Component: 150  -  total flux cleaned = 0.00182562 Jy
! Component: 200  -  total flux cleaned = 0.00196321 Jy
! Total flux subtracted in 200 components = 0.00196321 Jy
! Clean residual min=-0.002351 max=0.002555 Jy/beam
! Clean residual mean=0.000001 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.314027 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 91 components and 0.314027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064929Jy  sigma=1.203486
! Fit after  self-cal, rms=0.064926Jy  sigma=1.203391
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064926Jy  sigma=1.203391
! Fit after  self-cal, rms=0.064934Jy  sigma=1.202272
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.492 mas, bmaj=6.649 mas, bpa=0.9228 degrees
! Estimated noise=0.517619 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000401118 Jy
! Component: 100  -  total flux cleaned = -0.000573432 Jy
! Component: 150  -  total flux cleaned = -0.000610407 Jy
! Component: 200  -  total flux cleaned = -0.000649567 Jy
! Total flux subtracted in 200 components = -0.000649567 Jy
! Clean residual min=-0.002320 max=0.002204 Jy/beam
! Clean residual mean=0.000001 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.313377 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.313377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064881Jy  sigma=1.201253
! Fit after  self-cal, rms=0.064885Jy  sigma=1.201234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.32423e-07 Jy
! Component: 100  -  total flux cleaned = -3.38489e-05 Jy
! Component: 150  -  total flux cleaned = -3.40039e-05 Jy
! Component: 200  -  total flux cleaned = -6.44293e-05 Jy
! Total flux subtracted in 200 components = -6.44293e-05 Jy
! Clean residual min=-0.002294 max=0.002155 Jy/beam
! Clean residual mean=0.000001 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.313313 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 0.313313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064854Jy  sigma=1.200696
! Fit after  self-cal, rms=0.064855Jy  sigma=1.200685
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064855Jy  sigma=1.200685
! Fit after  self-cal, rms=0.064811Jy  sigma=1.200607
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.199 mas, bmaj=10.11 mas, bpa=-1.875 degrees
! Estimated noise=0.650533 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.55809e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112541 Jy
! Component: 150  -  total flux cleaned = 0.00011093 Jy
! Component: 200  -  total flux cleaned = 0.000158761 Jy
! Total flux subtracted in 200 components = 0.000158761 Jy
! Clean residual min=-0.002477 max=0.002781 Jy/beam
! Clean residual mean=0.000002 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.313471 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 117 components and 0.313471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064801Jy  sigma=1.200396
! Fit after  self-cal, rms=0.064801Jy  sigma=1.200373
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.74546e-05 Jy
! Component: 100  -  total flux cleaned = 4.78353e-05 Jy
! Component: 150  -  total flux cleaned = 4.77675e-05 Jy
! Component: 200  -  total flux cleaned = 6.69747e-05 Jy
! Total flux subtracted in 200 components = 6.69747e-05 Jy
! Clean residual min=-0.002488 max=0.002764 Jy/beam
! Clean residual mean=0.000002 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.313538 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 120 components and 0.313538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064794Jy  sigma=1.200307
! Fit after  self-cal, rms=0.064794Jy  sigma=1.200298
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.492 mas, bmaj=6.648 mas, bpa=0.8992 degrees
! Estimated noise=0.516967 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.492 x 6.648 at 0.8992 degrees (North through East)
! Clean map  min=-0.0021312  max=0.25067 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=5.892 mas, bpa=1.259 degrees
! Estimated noise=0.62855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.192712 Jy
! Component: 100  -  total flux cleaned = 0.241211 Jy
! Component: 150  -  total flux cleaned = 0.263823 Jy
! Component: 200  -  total flux cleaned = 0.277316 Jy
! Total flux subtracted in 200 components = 0.277316 Jy
! Clean residual min=-0.004583 max=0.007150 Jy/beam
! Clean residual mean=-0.000010 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.277316 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.277316 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.492 mas, bmaj=6.648 mas, bpa=0.8992 degrees
! Estimated noise=0.516967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112893 Jy
! Component: 100  -  total flux cleaned = 0.0184832 Jy
! Component: 150  -  total flux cleaned = 0.0231901 Jy
! Component: 200  -  total flux cleaned = 0.0261364 Jy
! Total flux subtracted in 200 components = 0.0261364 Jy
! Clean residual min=-0.002702 max=0.003109 Jy/beam
! Clean residual mean=-0.000003 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.303453 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.303453 Jy
! Inverting map 
! Added new window around map position (13, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250936 Jy
! Component: 100  -  total flux cleaned = 0.00418678 Jy
! Component: 150  -  total flux cleaned = 0.00523449 Jy
! Component: 200  -  total flux cleaned = 0.0060874 Jy
! Total flux subtracted in 200 components = 0.0060874 Jy
! Clean residual min=-0.002395 max=0.002204 Jy/beam
! Clean residual mean=-0.000001 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.30954 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 66 components and 0.30954 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.199 mas, bmaj=10.11 mas, bpa=-1.875 degrees
! Estimated noise=0.650533 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200639 Jy
! Component: 100  -  total flux cleaned = 0.0033137 Jy
! Component: 150  -  total flux cleaned = 0.00389665 Jy
! Component: 200  -  total flux cleaned = 0.00422501 Jy
! Total flux subtracted in 200 components = 0.00422501 Jy
! Clean residual min=-0.002502 max=0.002689 Jy/beam
! Clean residual mean=0.000001 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.313765 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267768 Jy
! Component: 100  -  total flux cleaned = 0.000518045 Jy
! Component: 150  -  total flux cleaned = 0.000752178 Jy
! Component: 200  -  total flux cleaned = 0.000972782 Jy
! Total flux subtracted in 200 components = 0.000972782 Jy
! Clean residual min=-0.002479 max=0.002669 Jy/beam
! Clean residual mean=0.000001 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.314738 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 103 components and 0.314738 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.492 mas, bmaj=6.648 mas, bpa=0.8992 degrees
! Estimated noise=0.516967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.07097e-06 Jy
! Component: 100  -  total flux cleaned = -1.07279e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103992 Jy
! Component: 200  -  total flux cleaned = 0.000175786 Jy
! Total flux subtracted in 200 components = 0.000175786 Jy
! Clean residual min=-0.002238 max=0.002203 Jy/beam
! Clean residual mean=0.000000 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.314914 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 123 components and 0.314914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064779Jy  sigma=1.199997
! Fit after  self-cal, rms=0.064766Jy  sigma=1.199575
wmodel J0836+2728_S_map.mod
! Writing 123 model components to file: J0836+2728_S_map.mod
wobs   J0836+2728_S_uvs.fits
! Writing UV FITS file: J0836+2728_S_uvs.fits
wwins  J0836+2728_S_map.win
! wwins: Wrote 4 windows to J0836+2728_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132031 Jy
! Component: 100  -  total flux cleaned = -0.000246607 Jy
! Component: 150  -  total flux cleaned = -0.000537273 Jy
! Component: 200  -  total flux cleaned = -0.000748798 Jy
! Component: 250  -  total flux cleaned = -0.000920037 Jy
! Component: 300  -  total flux cleaned = -0.00118577 Jy
! Component: 350  -  total flux cleaned = -0.0013471 Jy
! Component: 400  -  total flux cleaned = -0.00140996 Jy
! Component: 450  -  total flux cleaned = -0.00150287 Jy
! Component: 500  -  total flux cleaned = -0.00159399 Jy
! Component: 550  -  total flux cleaned = -0.00162397 Jy
! Component: 600  -  total flux cleaned = -0.00165393 Jy
! Component: 650  -  total flux cleaned = -0.00176931 Jy
! Component: 700  -  total flux cleaned = -0.00188236 Jy
! Component: 750  -  total flux cleaned = -0.00199341 Jy
! Component: 800  -  total flux cleaned = -0.00213097 Jy
! Component: 850  -  total flux cleaned = -0.00221174 Jy
! Component: 900  -  total flux cleaned = -0.00221187 Jy
! Component: 950  -  total flux cleaned = -0.00229154 Jy
! Component: 1000  -  total flux cleaned = -0.00234356 Jy
! Component: 1050  -  total flux cleaned = -0.00234342 Jy
! Component: 1100  -  total flux cleaned = -0.00234374 Jy
! Component: 1150  -  total flux cleaned = -0.00241909 Jy
! Component: 1200  -  total flux cleaned = -0.0024189 Jy
! Component: 1250  -  total flux cleaned = -0.00239412 Jy
! Component: 1300  -  total flux cleaned = -0.00239396 Jy
! Component: 1350  -  total flux cleaned = -0.00237 Jy
! Component: 1400  -  total flux cleaned = -0.00234647 Jy
! Component: 1450  -  total flux cleaned = -0.00234635 Jy
! Component: 1500  -  total flux cleaned = -0.00225465 Jy
! Component: 1550  -  total flux cleaned = -0.00227739 Jy
! Component: 1600  -  total flux cleaned = -0.00227689 Jy
! Component: 1650  -  total flux cleaned = -0.00221023 Jy
! Component: 1700  -  total flux cleaned = -0.00220984 Jy
! Component: 1750  -  total flux cleaned = -0.00212281 Jy
! Component: 1800  -  total flux cleaned = -0.00205786 Jy
! Component: 1850  -  total flux cleaned = -0.00212215 Jy
! Component: 1900  -  total flux cleaned = -0.00214297 Jy
! Component: 1950  -  total flux cleaned = -0.00212134 Jy
! Component: 2000  -  total flux cleaned = -0.00203825 Jy
! Component: 2050  -  total flux cleaned = -0.00205889 Jy
! Component: 2100  -  total flux cleaned = -0.0021205 Jy
! Component: 2150  -  total flux cleaned = -0.00210027 Jy
! Component: 2200  -  total flux cleaned = -0.00216055 Jy
! Component: 2250  -  total flux cleaned = -0.00214086 Jy
! Component: 2300  -  total flux cleaned = -0.00221949 Jy
! Component: 2350  -  total flux cleaned = -0.00214124 Jy
! Component: 2400  -  total flux cleaned = -0.00221856 Jy
! Component: 2450  -  total flux cleaned = -0.0022763 Jy
! Component: 2500  -  total flux cleaned = -0.00225711 Jy
! Component: 2550  -  total flux cleaned = -0.0022759 Jy
! Component: 2600  -  total flux cleaned = -0.00231337 Jy
! Component: 2650  -  total flux cleaned = -0.00225773 Jy
! Component: 2700  -  total flux cleaned = -0.0023131 Jy
! Component: 2750  -  total flux cleaned = -0.00227644 Jy
! Component: 2800  -  total flux cleaned = -0.00224043 Jy
! Component: 2850  -  total flux cleaned = -0.00231239 Jy
! Component: 2900  -  total flux cleaned = -0.00233027 Jy
! Component: 2950  -  total flux cleaned = -0.00241864 Jy
! Component: 3000  -  total flux cleaned = -0.00233063 Jy
! Component: 3050  -  total flux cleaned = -0.00233071 Jy
! Component: 3100  -  total flux cleaned = -0.00234803 Jy
! Component: 3150  -  total flux cleaned = -0.00236512 Jy
! Component: 3200  -  total flux cleaned = -0.00243366 Jy
! Component: 3250  -  total flux cleaned = -0.00243364 Jy
! Component: 3300  -  total flux cleaned = -0.00243343 Jy
! Component: 3350  -  total flux cleaned = -0.0024499 Jy
! Component: 3400  -  total flux cleaned = -0.0024831 Jy
! Component: 3450  -  total flux cleaned = -0.00246643 Jy
! Component: 3500  -  total flux cleaned = -0.00241723 Jy
! Component: 3550  -  total flux cleaned = -0.00253091 Jy
! Component: 3600  -  total flux cleaned = -0.00251473 Jy
! Component: 3650  -  total flux cleaned = -0.00248283 Jy
! Component: 3700  -  total flux cleaned = -0.0025626 Jy
! Component: 3750  -  total flux cleaned = -0.00253086 Jy
! Component: 3800  -  total flux cleaned = -0.00253079 Jy
! Component: 3850  -  total flux cleaned = -0.00251512 Jy
! Component: 3900  -  total flux cleaned = -0.00248412 Jy
! Component: 3950  -  total flux cleaned = -0.00246893 Jy
! Component: 4000  -  total flux cleaned = -0.0024536 Jy
! Component: 4050  -  total flux cleaned = -0.00243818 Jy
! Total flux subtracted in 4096 components = -0.00246855 Jy
! Clean residual min=-0.000935 max=0.001233 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.312445 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 434 components and 0.312445 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0836+2728_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.492 x 6.648 at 0.8992 degrees (North through East)
! Clean map  min=-0.0021826  max=0.25075 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0836+2728_S_map.fits
wmodel /vlbi/uf001/uva//J0836+2728_S_map.mod
! Writing 434 model components to file: /vlbi/uf001/uva//J0836+2728_S_map.mod
wobs   /vlbi/uf001/uva//J0836+2728_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0836+2728_S_uvs.fits
wwins  /vlbi/uf001/uva//J0836+2728_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0836+2728_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.250753 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000282209 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.337634 0.337634 0.675268 1.35054 2.70107 5.40214 10.8043 21.6086 43.2172 86.4343
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.25 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  888.536 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0836+2728_S_dfm.log closed on Mon Jan 14 00:01:27 2019