! Started logfile: /vlbi/uf001/uva//J0833-4441_S_dfm.log on Mon Jan 14 00:00:18 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0833-4441_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0833-4441_S_uva.fits
! AN table 1: 80 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.99625 visibilities/baseline/integration-bin.
! Found source: J0833-4441
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2391 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0833-4441_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.003777Jy  sigma=13.378775
! Fit after  self-cal, rms=0.922002Jy  sigma=12.250796
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.88 mas, bmaj=97.45 mas, bpa=4.07 degrees
! Estimated noise=1.17648 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0627362 Jy
! Component: 100  -  total flux cleaned = 0.0771084 Jy
! Total flux subtracted in 100 components = 0.0771084 Jy
! Clean residual min=-0.005544 max=0.005642 Jy/beam
! Clean residual mean=-0.000353 rms=0.002068 Jy/beam
! Combined flux in latest and established models = 0.0771084 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0771084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080151Jy  sigma=1.059870
! Fit after  self-cal, rms=0.079539Jy  sigma=1.052069
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.31 mas, bmaj=100.9 mas, bpa=4.123 degrees
! Estimated noise=1.09448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798967 Jy
! Component: 100  -  total flux cleaned = 0.0124862 Jy
! Component: 150  -  total flux cleaned = 0.0143863 Jy
! Component: 200  -  total flux cleaned = 0.0151983 Jy
! Total flux subtracted in 200 components = 0.0151983 Jy
! Clean residual min=-0.004308 max=0.003906 Jy/beam
! Clean residual mean=-0.000155 rms=0.001341 Jy/beam
! Combined flux in latest and established models = 0.0923067 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 94 components and 0.0923066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078766Jy  sigma=1.040830
! Fit after  self-cal, rms=0.078680Jy  sigma=1.039849
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.31 x 100.9 at 4.123 degrees (North through East)
! Clean map  min=-0.0038979  max=0.083243 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        1.04     LA        0.90     OV        1.03     
!   PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.00     LA        0.88     OV        1.02     
!   PT        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        1.12     LA        0.94     OV        1.11     
!   PT        0.94     
! 
! 
! Fit before self-cal, rms=0.078680Jy  sigma=1.039849
! Fit after  self-cal, rms=0.078285Jy  sigma=1.034850
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.43 mas, bmaj=100.1 mas, bpa=4.094 degrees
! Estimated noise=1.08234 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.8762e-05 Jy
! Component: 100  -  total flux cleaned = 1.50589e-05 Jy
! Component: 150  -  total flux cleaned = 1.52949e-05 Jy
! Component: 200  -  total flux cleaned = 1.54472e-05 Jy
! Total flux subtracted in 200 components = 1.54472e-05 Jy
! Clean residual min=-0.002291 max=0.002780 Jy/beam
! Clean residual mean=-0.000010 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.0923221 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 146 components and 0.0923221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078266Jy  sigma=1.034602
! Fit after  self-cal, rms=0.078501Jy  sigma=1.033800
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078501Jy  sigma=1.033800
! Fit after  self-cal, rms=0.078821Jy  sigma=1.033670
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.45 mas, bmaj=99.95 mas, bpa=4.077 degrees
! Estimated noise=1.08257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.05154e-05 Jy
! Component: 100  -  total flux cleaned = -3.96751e-05 Jy
! Component: 150  -  total flux cleaned = -8.39349e-05 Jy
! Component: 200  -  total flux cleaned = -0.000123838 Jy
! Total flux subtracted in 200 components = -0.000123838 Jy
! Clean residual min=-0.002285 max=0.002979 Jy/beam
! Clean residual mean=-0.000011 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.0921983 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 163 components and 0.0921983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078809Jy  sigma=1.033516
! Fit after  self-cal, rms=0.078861Jy  sigma=1.033474
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.82192e-05 Jy
! Component: 100  -  total flux cleaned = 6.96413e-06 Jy
! Component: 150  -  total flux cleaned = -3.15362e-05 Jy
! Component: 200  -  total flux cleaned = -6.78873e-05 Jy
! Total flux subtracted in 200 components = -6.78873e-05 Jy
! Clean residual min=-0.002207 max=0.003008 Jy/beam
! Clean residual mean=-0.000016 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.0921304 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 171 components and 0.0921304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078852Jy  sigma=1.033358
! Fit after  self-cal, rms=0.078855Jy  sigma=1.033345
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078855Jy  sigma=1.033345
! Fit after  self-cal, rms=0.078887Jy  sigma=1.031887
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.45 mas, bmaj=99.23 mas, bpa=4.077 degrees
! Estimated noise=1.07944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000654855 Jy
! Component: 100  -  total flux cleaned = 0.000548115 Jy
! Component: 150  -  total flux cleaned = 0.000547427 Jy
! Component: 200  -  total flux cleaned = 0.000525908 Jy
! Total flux subtracted in 200 components = 0.000525908 Jy
! Clean residual min=-0.002009 max=0.002066 Jy/beam
! Clean residual mean=-0.000024 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.0926563 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 205 components and 0.0926563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078871Jy  sigma=1.031633
! Fit after  self-cal, rms=0.078947Jy  sigma=1.031386
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.24905e-05 Jy
! Component: 100  -  total flux cleaned = 1.59388e-05 Jy
! Component: 150  -  total flux cleaned = -3.39303e-05 Jy
! Component: 200  -  total flux cleaned = -4.95814e-05 Jy
! Total flux subtracted in 200 components = -4.95814e-05 Jy
! Clean residual min=-0.001873 max=0.002282 Jy/beam
! Clean residual mean=-0.000027 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0926067 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 227 components and 0.0926067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078940Jy  sigma=1.031292
! Fit after  self-cal, rms=0.078942Jy  sigma=1.031282
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078942Jy  sigma=1.031282
! Fit after  self-cal, rms=0.078985Jy  sigma=1.031129
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.11 mas, bmaj=100.1 mas, bpa=3.962 degrees
! Estimated noise=1.07955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350972 Jy
! Component: 100  -  total flux cleaned = 0.000392592 Jy
! Component: 150  -  total flux cleaned = 0.000374568 Jy
! Component: 200  -  total flux cleaned = 0.000358267 Jy
! Total flux subtracted in 200 components = 0.000358267 Jy
! Clean residual min=-0.001803 max=0.001974 Jy/beam
! Clean residual mean=-0.000023 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.092965 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 248 components and 0.092965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078975Jy  sigma=1.030986
! Fit after  self-cal, rms=0.079011Jy  sigma=1.030952
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.2423e-05 Jy
! Component: 100  -  total flux cleaned = 4.68079e-05 Jy
! Component: 150  -  total flux cleaned = 3.18603e-05 Jy
! Component: 200  -  total flux cleaned = 3.19812e-05 Jy
! Total flux subtracted in 200 components = 3.19812e-05 Jy
! Clean residual min=-0.001742 max=0.002026 Jy/beam
! Clean residual mean=-0.000025 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.092997 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 253 components and 0.0929969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079006Jy  sigma=1.030889
! Fit after  self-cal, rms=0.079006Jy  sigma=1.030880
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=13.45 mas, bmaj=98.83 mas, bpa=4.089 degrees
! Estimated noise=1.07626 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.45 x 98.83 at 4.089 degrees (North through East)
! Clean map  min=-0.0017776  max=0.082044 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.02 mas, bmaj=95.78 mas, bpa=4.034 degrees
! Estimated noise=1.16331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0620522 Jy
! Component: 100  -  total flux cleaned = 0.0762509 Jy
! Component: 150  -  total flux cleaned = 0.0826764 Jy
! Component: 200  -  total flux cleaned = 0.0865913 Jy
! Total flux subtracted in 200 components = 0.0865913 Jy
! Clean residual min=-0.003413 max=0.003302 Jy/beam
! Clean residual mean=-0.000146 rms=0.001268 Jy/beam
! Combined flux in latest and established models = 0.0865913 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 66 model components to the UV plane model.
! The established model now contains 66 components and 0.0865913 Jy
! Inverting map and beam 
! Estimated beam: bmin=13.45 mas, bmaj=98.83 mas, bpa=4.089 degrees
! Estimated noise=1.07626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309225 Jy
! Component: 100  -  total flux cleaned = 0.00419259 Jy
! Component: 150  -  total flux cleaned = 0.00455865 Jy
! Component: 200  -  total flux cleaned = 0.00481821 Jy
! Total flux subtracted in 200 components = 0.00481821 Jy
! Clean residual min=-0.002515 max=0.002505 Jy/beam
! Clean residual mean=-0.000056 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.0914095 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 151 components and 0.0914095 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.11 mas, bmaj=100.1 mas, bpa=3.962 degrees
! Estimated noise=1.07955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000433221 Jy
! Component: 100  -  total flux cleaned = 0.000549828 Jy
! Component: 150  -  total flux cleaned = 0.000654938 Jy
! Component: 200  -  total flux cleaned = 0.000751917 Jy
! Total flux subtracted in 200 components = 0.000751917 Jy
! Clean residual min=-0.002239 max=0.002180 Jy/beam
! Clean residual mean=-0.000043 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.0921614 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.84787e-05 Jy
! Component: 100  -  total flux cleaned = 0.00011353 Jy
! Component: 150  -  total flux cleaned = 0.000215434 Jy
! Component: 200  -  total flux cleaned = 0.000286611 Jy
! Total flux subtracted in 200 components = 0.000286611 Jy
! Clean residual min=-0.002073 max=0.002033 Jy/beam
! Clean residual mean=-0.000038 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.092448 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 211 components and 0.092448 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=13.45 mas, bmaj=98.83 mas, bpa=4.089 degrees
! Estimated noise=1.07626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.88771e-05 Jy
! Component: 100  -  total flux cleaned = -3.31431e-05 Jy
! Component: 150  -  total flux cleaned = -3.29678e-05 Jy
! Component: 200  -  total flux cleaned = -3.26505e-05 Jy
! Total flux subtracted in 200 components = -3.26505e-05 Jy
! Clean residual min=-0.002016 max=0.002053 Jy/beam
! Clean residual mean=-0.000037 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.0924153 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 226 components and 0.0924153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079032Jy  sigma=1.031191
! Fit after  self-cal, rms=0.079017Jy  sigma=1.031159
wmodel J0833-4441_S_map.mod
! Writing 226 model components to file: J0833-4441_S_map.mod
wobs   J0833-4441_S_uvs.fits
! Writing UV FITS file: J0833-4441_S_uvs.fits
wwins  J0833-4441_S_map.win
! wwins: Wrote 1 windows to J0833-4441_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361119 Jy
! Component: 100  -  total flux cleaned = 0.000486384 Jy
! Component: 150  -  total flux cleaned = 0.000571001 Jy
! Component: 200  -  total flux cleaned = 0.000755086 Jy
! Component: 250  -  total flux cleaned = 0.0010052 Jy
! Component: 300  -  total flux cleaned = 0.00129115 Jy
! Component: 350  -  total flux cleaned = 0.00144893 Jy
! Component: 400  -  total flux cleaned = 0.00162167 Jy
! Component: 450  -  total flux cleaned = 0.00174505 Jy
! Component: 500  -  total flux cleaned = 0.00180445 Jy
! Component: 550  -  total flux cleaned = 0.00189885 Jy
! Component: 600  -  total flux cleaned = 0.00193452 Jy
! Component: 650  -  total flux cleaned = 0.00196893 Jy
! Component: 700  -  total flux cleaned = 0.00196875 Jy
! Component: 750  -  total flux cleaned = 0.00195275 Jy
! Component: 800  -  total flux cleaned = 0.00196853 Jy
! Component: 850  -  total flux cleaned = 0.00196863 Jy
! Component: 900  -  total flux cleaned = 0.00196875 Jy
! Component: 950  -  total flux cleaned = 0.00193995 Jy
! Component: 1000  -  total flux cleaned = 0.00189835 Jy
! Component: 1050  -  total flux cleaned = 0.00189876 Jy
! Component: 1100  -  total flux cleaned = 0.00185908 Jy
! Component: 1150  -  total flux cleaned = 0.00175489 Jy
! Component: 1200  -  total flux cleaned = 0.00165226 Jy
! Component: 1250  -  total flux cleaned = 0.00156372 Jy
! Component: 1300  -  total flux cleaned = 0.00153869 Jy
! Component: 1350  -  total flux cleaned = 0.00147638 Jy
! Component: 1400  -  total flux cleaned = 0.00143921 Jy
! Component: 1450  -  total flux cleaned = 0.00140227 Jy
! Component: 1500  -  total flux cleaned = 0.00135332 Jy
! Component: 1550  -  total flux cleaned = 0.0013168 Jy
! Component: 1600  -  total flux cleaned = 0.00129249 Jy
! Component: 1650  -  total flux cleaned = 0.00128036 Jy
! Component: 1700  -  total flux cleaned = 0.00126816 Jy
! Component: 1750  -  total flux cleaned = 0.00124384 Jy
! Component: 1800  -  total flux cleaned = 0.00123171 Jy
! Component: 1850  -  total flux cleaned = 0.00120737 Jy
! Component: 1900  -  total flux cleaned = 0.0011951 Jy
! Component: 1950  -  total flux cleaned = 0.00121975 Jy
! Component: 2000  -  total flux cleaned = 0.00128186 Jy
! Component: 2050  -  total flux cleaned = 0.00134429 Jy
! Component: 2100  -  total flux cleaned = 0.00142017 Jy
! Component: 2150  -  total flux cleaned = 0.0014839 Jy
! Component: 2200  -  total flux cleaned = 0.00154838 Jy
! Component: 2250  -  total flux cleaned = 0.00162651 Jy
! Component: 2300  -  total flux cleaned = 0.00170555 Jy
! Component: 2350  -  total flux cleaned = 0.00175869 Jy
! Component: 2400  -  total flux cleaned = 0.0018527 Jy
! Component: 2450  -  total flux cleaned = 0.00193418 Jy
! Component: 2500  -  total flux cleaned = 0.00201664 Jy
! Component: 2550  -  total flux cleaned = 0.00209985 Jy
! Component: 2600  -  total flux cleaned = 0.00218406 Jy
! Component: 2650  -  total flux cleaned = 0.00226926 Jy
! Component: 2700  -  total flux cleaned = 0.00234109 Jy
! Component: 2750  -  total flux cleaned = 0.00244273 Jy
! Component: 2800  -  total flux cleaned = 0.00253073 Jy
! Component: 2850  -  total flux cleaned = 0.00263477 Jy
! Component: 2900  -  total flux cleaned = 0.00272502 Jy
! Component: 2950  -  total flux cleaned = 0.00281633 Jy
! Component: 3000  -  total flux cleaned = 0.00292424 Jy
! Component: 3050  -  total flux cleaned = 0.0030337 Jy
! Component: 3100  -  total flux cleaned = 0.00311282 Jy
! Component: 3150  -  total flux cleaned = 0.00320863 Jy
! Component: 3200  -  total flux cleaned = 0.00330567 Jy
! Component: 3250  -  total flux cleaned = 0.00342022 Jy
! Component: 3300  -  total flux cleaned = 0.00351984 Jy
! Component: 3350  -  total flux cleaned = 0.00362073 Jy
! Component: 3400  -  total flux cleaned = 0.00375704 Jy
! Component: 3450  -  total flux cleaned = 0.00384361 Jy
! Component: 3500  -  total flux cleaned = 0.0039661 Jy
! Component: 3550  -  total flux cleaned = 0.00407249 Jy
! Component: 3600  -  total flux cleaned = 0.0041801 Jy
! Component: 3650  -  total flux cleaned = 0.00428938 Jy
! Component: 3700  -  total flux cleaned = 0.00440019 Jy
! Component: 3750  -  total flux cleaned = 0.00451258 Jy
! Component: 3800  -  total flux cleaned = 0.00462617 Jy
! Component: 3850  -  total flux cleaned = 0.00470307 Jy
! Component: 3900  -  total flux cleaned = 0.0048198 Jy
! Component: 3950  -  total flux cleaned = 0.00493828 Jy
! Component: 4000  -  total flux cleaned = 0.00503843 Jy
! Component: 4050  -  total flux cleaned = 0.00516025 Jy
! Total flux subtracted in 4096 components = 0.00524265 Jy
! Clean residual min=-0.001190 max=0.001101 Jy/beam
! Clean residual mean=0.000043 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.097658 Jy
keep
! Adding 454 model components to the UV plane model.
! The established model now contains 680 components and 0.097658 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0833-4441_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.45 x 98.83 at 4.089 degrees (North through East)
! Clean map  min=-0.0029946  max=0.080437 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0833-4441_S_map.fits
wmodel /vlbi/uf001/uva//J0833-4441_S_map.mod
! Writing 680 model components to file: /vlbi/uf001/uva//J0833-4441_S_map.mod
wobs   /vlbi/uf001/uva//J0833-4441_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0833-4441_S_uvs.fits
wwins  /vlbi/uf001/uva//J0833-4441_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0833-4441_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0804368 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000454011 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.6933 1.6933 3.3866 6.77319 13.5464 27.0928 54.1855
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.08 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  177.169 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0833-4441_S_dfm.log closed on Mon Jan 14 00:00:24 2019