! Started logfile: /vlbi/uf001/uva//J0825+1332_S_dfm.log on Sun Jan 13 23:56:14 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0825+1332_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0825+1332_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.97076 visibilities/baseline/integration-bin.
! Found source: J0825+1332
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7470 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0825+1332_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024640Jy  sigma=23.448104
! Fit after  self-cal, rms=0.829613Jy  sigma=19.042175
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.786 mas, bmaj=6.747 mas, bpa=-3.124 degrees
! Estimated noise=0.533567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131221 Jy
! Component: 100  -  total flux cleaned = 0.160282 Jy
! Total flux subtracted in 100 components = 0.160282 Jy
! Clean residual min=-0.004087 max=0.009796 Jy/beam
! Clean residual mean=-0.000005 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.160282 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.160282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064703Jy  sigma=1.354264
! Fit after  self-cal, rms=0.064698Jy  sigma=1.354149
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109393 Jy
! Component: 100  -  total flux cleaned = 0.0174052 Jy
! Total flux subtracted in 100 components = 0.0174052 Jy
! Clean residual min=-0.003234 max=0.006627 Jy/beam
! Clean residual mean=-0.000004 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.177688 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 29 components and 0.177688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062331Jy  sigma=1.300155
! Fit after  self-cal, rms=0.062312Jy  sigma=1.299784
! Inverting map 
! Added new window around map position (1, 11).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00598999 Jy
! Component: 100  -  total flux cleaned = 0.00954019 Jy
! Total flux subtracted in 100 components = 0.00954019 Jy
! Clean residual min=-0.003088 max=0.003883 Jy/beam
! Clean residual mean=-0.000004 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.187228 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 46 components and 0.187228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061654Jy  sigma=1.283767
! Fit after  self-cal, rms=0.061635Jy  sigma=1.283378
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.3 mas, bmaj=7.489 mas, bpa=-2.342 degrees
! Estimated noise=0.376978 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342085 Jy
! Component: 100  -  total flux cleaned = 0.00575005 Jy
! Component: 150  -  total flux cleaned = 0.00739811 Jy
! Component: 200  -  total flux cleaned = 0.00861115 Jy
! Total flux subtracted in 200 components = 0.00861115 Jy
! Clean residual min=-0.003007 max=0.003773 Jy/beam
! Clean residual mean=-0.000006 rms=0.000745 Jy/beam
! Combined flux in latest and established models = 0.195839 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 63 components and 0.195839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061358Jy  sigma=1.278233
! Fit after  self-cal, rms=0.061355Jy  sigma=1.278098
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.3 x 7.489 at -2.342 degrees (North through East)
! Clean map  min=-0.0029403  max=0.17114 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        1.00     
!   LA        0.95     MK        1.01     NL        1.06     OV        0.98     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.05     OV        1.00     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.99     KP        1.01     
!   LA        0.95     MK        1.00     NL        1.04     OV        0.98     
!   PT        1.03     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.061355Jy  sigma=1.278098
! Fit after  self-cal, rms=0.059945Jy  sigma=1.268695
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.309 mas, bmaj=7.504 mas, bpa=-2.405 degrees
! Estimated noise=0.377041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270217 Jy
! Component: 100  -  total flux cleaned = 0.000410001 Jy
! Component: 150  -  total flux cleaned = 0.000535049 Jy
! Component: 200  -  total flux cleaned = 0.00062572 Jy
! Total flux subtracted in 200 components = 0.00062572 Jy
! Clean residual min=-0.002401 max=0.002613 Jy/beam
! Clean residual mean=-0.000002 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.196465 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 0.196465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059914Jy  sigma=1.268242
! Fit after  self-cal, rms=0.059909Jy  sigma=1.268154
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059909Jy  sigma=1.268154
! Fit after  self-cal, rms=0.057178Jy  sigma=1.239378
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.308 mas, bmaj=7.492 mas, bpa=-2.409 degrees
! Estimated noise=0.376822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000431923 Jy
! Component: 100  -  total flux cleaned = 0.00053118 Jy
! Component: 150  -  total flux cleaned = 0.000611836 Jy
! Component: 200  -  total flux cleaned = 0.00061261 Jy
! Total flux subtracted in 200 components = 0.00061261 Jy
! Clean residual min=-0.001693 max=0.001784 Jy/beam
! Clean residual mean=-0.000000 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.197077 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.197077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057165Jy  sigma=1.239118
! Fit after  self-cal, rms=0.057170Jy  sigma=1.238996
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.92409e-05 Jy
! Component: 100  -  total flux cleaned = 4.15321e-05 Jy
! Component: 150  -  total flux cleaned = 5.35109e-05 Jy
! Component: 200  -  total flux cleaned = 6.45778e-05 Jy
! Total flux subtracted in 200 components = 6.45778e-05 Jy
! Clean residual min=-0.001690 max=0.001806 Jy/beam
! Clean residual mean=-0.000000 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.197142 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 0.197142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057165Jy  sigma=1.238894
! Fit after  self-cal, rms=0.057165Jy  sigma=1.238893
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057165Jy  sigma=1.238893
! Fit after  self-cal, rms=0.057151Jy  sigma=1.238095
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.309 mas, bmaj=7.487 mas, bpa=-2.354 degrees
! Estimated noise=0.376714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.03524e-05 Jy
! Component: 100  -  total flux cleaned = 9.84727e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110201 Jy
! Component: 200  -  total flux cleaned = 9.911e-05 Jy
! Total flux subtracted in 200 components = 9.911e-05 Jy
! Clean residual min=-0.001674 max=0.001757 Jy/beam
! Clean residual mean=-0.000000 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.197241 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.197241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057145Jy  sigma=1.237968
! Fit after  self-cal, rms=0.057146Jy  sigma=1.237962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.2254e-07 Jy
! Component: 100  -  total flux cleaned = -8.90421e-06 Jy
! Component: 150  -  total flux cleaned = -8.73515e-06 Jy
! Component: 200  -  total flux cleaned = -8.89057e-06 Jy
! Total flux subtracted in 200 components = -8.89057e-06 Jy
! Clean residual min=-0.001672 max=0.001770 Jy/beam
! Clean residual mean=-0.000000 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.197232 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.197232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057143Jy  sigma=1.237899
! Fit after  self-cal, rms=0.057143Jy  sigma=1.237899
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057143Jy  sigma=1.237899
! Fit after  self-cal, rms=0.057136Jy  sigma=1.237873
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.168 mas, bmaj=10.86 mas, bpa=-4.102 degrees
! Estimated noise=0.475911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000501524 Jy
! Component: 100  -  total flux cleaned = 0.000515302 Jy
! Component: 150  -  total flux cleaned = 0.000526688 Jy
! Component: 200  -  total flux cleaned = 0.000548349 Jy
! Total flux subtracted in 200 components = 0.000548349 Jy
! Clean residual min=-0.001967 max=0.002141 Jy/beam
! Clean residual mean=0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.19778 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 104 components and 0.19778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057139Jy  sigma=1.237898
! Fit after  self-cal, rms=0.057138Jy  sigma=1.237882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.59979e-05 Jy
! Component: 100  -  total flux cleaned = 5.58405e-05 Jy
! Component: 150  -  total flux cleaned = 7.49347e-05 Jy
! Component: 200  -  total flux cleaned = 9.27577e-05 Jy
! Total flux subtracted in 200 components = 9.27577e-05 Jy
! Clean residual min=-0.001985 max=0.002146 Jy/beam
! Clean residual mean=0.000000 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.197873 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 106 components and 0.197873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057139Jy  sigma=1.237925
! Fit after  self-cal, rms=0.057140Jy  sigma=1.237916
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.31 mas, bmaj=7.483 mas, bpa=-2.316 degrees
! Estimated noise=0.376706 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.31 x 7.483 at -2.316 degrees (North through East)
! Clean map  min=-0.0016082  max=0.17073 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.794 mas, bmaj=6.756 mas, bpa=-3.168 degrees
! Estimated noise=0.533093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131057 Jy
! Component: 100  -  total flux cleaned = 0.160185 Jy
! Component: 150  -  total flux cleaned = 0.171441 Jy
! Component: 200  -  total flux cleaned = 0.178548 Jy
! Total flux subtracted in 200 components = 0.178548 Jy
! Clean residual min=-0.002695 max=0.003795 Jy/beam
! Clean residual mean=-0.000001 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.178548 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.178548 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.31 mas, bmaj=7.483 mas, bpa=-2.316 degrees
! Estimated noise=0.376706 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00606374 Jy
! Component: 100  -  total flux cleaned = 0.00977234 Jy
! Component: 150  -  total flux cleaned = 0.012231 Jy
! Component: 200  -  total flux cleaned = 0.0139579 Jy
! Total flux subtracted in 200 components = 0.0139579 Jy
! Clean residual min=-0.001737 max=0.001939 Jy/beam
! Clean residual mean=0.000000 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.192506 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 92 components and 0.192506 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.168 mas, bmaj=10.86 mas, bpa=-4.102 degrees
! Estimated noise=0.475911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209842 Jy
! Component: 100  -  total flux cleaned = 0.00333761 Jy
! Component: 150  -  total flux cleaned = 0.00409915 Jy
! Component: 200  -  total flux cleaned = 0.00457793 Jy
! Total flux subtracted in 200 components = 0.00457793 Jy
! Clean residual min=-0.002042 max=0.002098 Jy/beam
! Clean residual mean=0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.197084 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275995 Jy
! Component: 100  -  total flux cleaned = 0.00032641 Jy
! Component: 150  -  total flux cleaned = 0.000372686 Jy
! Component: 200  -  total flux cleaned = 0.000407374 Jy
! Total flux subtracted in 200 components = 0.000407374 Jy
! Clean residual min=-0.002035 max=0.002129 Jy/beam
! Clean residual mean=0.000000 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.197492 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 124 components and 0.197492 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.31 mas, bmaj=7.483 mas, bpa=-2.316 degrees
! Estimated noise=0.376706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000340981 Jy
! Component: 100  -  total flux cleaned = -0.000340129 Jy
! Component: 150  -  total flux cleaned = -0.000339756 Jy
! Component: 200  -  total flux cleaned = -0.000358015 Jy
! Total flux subtracted in 200 components = -0.000358015 Jy
! Clean residual min=-0.001695 max=0.001805 Jy/beam
! Clean residual mean=-0.000000 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.197134 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 138 components and 0.197134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057152Jy  sigma=1.238311
! Fit after  self-cal, rms=0.057152Jy  sigma=1.238287
wmodel J0825+1332_S_map.mod
! Writing 138 model components to file: J0825+1332_S_map.mod
wobs   J0825+1332_S_uvs.fits
! Writing UV FITS file: J0825+1332_S_uvs.fits
wwins  J0825+1332_S_map.win
! wwins: Wrote 2 windows to J0825+1332_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332584 Jy
! Component: 100  -  total flux cleaned = 0.000717213 Jy
! Component: 150  -  total flux cleaned = 0.00100037 Jy
! Component: 200  -  total flux cleaned = 0.00116437 Jy
! Component: 250  -  total flux cleaned = 0.00129578 Jy
! Component: 300  -  total flux cleaned = 0.00147607 Jy
! Component: 350  -  total flux cleaned = 0.00167754 Jy
! Component: 400  -  total flux cleaned = 0.00175175 Jy
! Component: 450  -  total flux cleaned = 0.00184921 Jy
! Component: 500  -  total flux cleaned = 0.00196834 Jy
! Component: 550  -  total flux cleaned = 0.00217755 Jy
! Component: 600  -  total flux cleaned = 0.00222291 Jy
! Component: 650  -  total flux cleaned = 0.00229071 Jy
! Component: 700  -  total flux cleaned = 0.00235741 Jy
! Component: 750  -  total flux cleaned = 0.0025317 Jy
! Component: 800  -  total flux cleaned = 0.00257377 Jy
! Component: 850  -  total flux cleaned = 0.00261613 Jy
! Component: 900  -  total flux cleaned = 0.00263715 Jy
! Component: 950  -  total flux cleaned = 0.00272 Jy
! Component: 1000  -  total flux cleaned = 0.00280145 Jy
! Component: 1050  -  total flux cleaned = 0.00286147 Jy
! Component: 1100  -  total flux cleaned = 0.00292114 Jy
! Component: 1150  -  total flux cleaned = 0.00297956 Jy
! Component: 1200  -  total flux cleaned = 0.00301865 Jy
! Component: 1250  -  total flux cleaned = 0.00309528 Jy
! Component: 1300  -  total flux cleaned = 0.00315208 Jy
! Component: 1350  -  total flux cleaned = 0.00324546 Jy
! Component: 1400  -  total flux cleaned = 0.0033007 Jy
! Component: 1450  -  total flux cleaned = 0.00335524 Jy
! Component: 1500  -  total flux cleaned = 0.00339159 Jy
! Component: 1550  -  total flux cleaned = 0.00342732 Jy
! Component: 1600  -  total flux cleaned = 0.00355106 Jy
! Component: 1650  -  total flux cleaned = 0.00353346 Jy
! Component: 1700  -  total flux cleaned = 0.00363734 Jy
! Component: 1750  -  total flux cleaned = 0.00368878 Jy
! Component: 1800  -  total flux cleaned = 0.00375678 Jy
! Component: 1850  -  total flux cleaned = 0.00375672 Jy
! Component: 1900  -  total flux cleaned = 0.00379025 Jy
! Component: 1950  -  total flux cleaned = 0.0038396 Jy
! Component: 2000  -  total flux cleaned = 0.00382335 Jy
! Component: 2050  -  total flux cleaned = 0.00380713 Jy
! Component: 2100  -  total flux cleaned = 0.00387133 Jy
! Component: 2150  -  total flux cleaned = 0.00380759 Jy
! Component: 2200  -  total flux cleaned = 0.00385492 Jy
! Component: 2250  -  total flux cleaned = 0.00383918 Jy
! Component: 2300  -  total flux cleaned = 0.00379252 Jy
! Component: 2350  -  total flux cleaned = 0.00382359 Jy
! Component: 2400  -  total flux cleaned = 0.00380832 Jy
! Component: 2450  -  total flux cleaned = 0.0037931 Jy
! Component: 2500  -  total flux cleaned = 0.00377791 Jy
! Component: 2550  -  total flux cleaned = 0.00376282 Jy
! Component: 2600  -  total flux cleaned = 0.00370351 Jy
! Component: 2650  -  total flux cleaned = 0.00371812 Jy
! Component: 2700  -  total flux cleaned = 0.0036744 Jy
! Component: 2750  -  total flux cleaned = 0.00367436 Jy
! Component: 2800  -  total flux cleaned = 0.00365995 Jy
! Component: 2850  -  total flux cleaned = 0.00370263 Jy
! Component: 2900  -  total flux cleaned = 0.00364594 Jy
! Component: 2950  -  total flux cleaned = 0.00364592 Jy
! Component: 3000  -  total flux cleaned = 0.0037015 Jy
! Component: 3050  -  total flux cleaned = 0.00370153 Jy
! Component: 3100  -  total flux cleaned = 0.00370136 Jy
! Component: 3150  -  total flux cleaned = 0.00366043 Jy
! Component: 3200  -  total flux cleaned = 0.00368776 Jy
! Component: 3250  -  total flux cleaned = 0.00366078 Jy
! Component: 3300  -  total flux cleaned = 0.00371413 Jy
! Component: 3350  -  total flux cleaned = 0.00372734 Jy
! Component: 3400  -  total flux cleaned = 0.0037404 Jy
! Component: 3450  -  total flux cleaned = 0.00377972 Jy
! Component: 3500  -  total flux cleaned = 0.00375383 Jy
! Component: 3550  -  total flux cleaned = 0.00377953 Jy
! Component: 3600  -  total flux cleaned = 0.00377944 Jy
! Component: 3650  -  total flux cleaned = 0.00379211 Jy
! Component: 3700  -  total flux cleaned = 0.00380473 Jy
! Component: 3750  -  total flux cleaned = 0.00375453 Jy
! Component: 3800  -  total flux cleaned = 0.00377952 Jy
! Component: 3850  -  total flux cleaned = 0.00374226 Jy
! Component: 3900  -  total flux cleaned = 0.00374233 Jy
! Component: 3950  -  total flux cleaned = 0.00376693 Jy
! Component: 4000  -  total flux cleaned = 0.00374267 Jy
! Component: 4050  -  total flux cleaned = 0.0037669 Jy
! Total flux subtracted in 4096 components = 0.00376685 Jy
! Clean residual min=-0.000855 max=0.000713 Jy/beam
! Clean residual mean=0.000000 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.200901 Jy
keep
! Adding 338 model components to the UV plane model.
! The established model now contains 476 components and 0.200901 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0825+1332_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.31 x 7.483 at -2.316 degrees (North through East)
! Clean map  min=-0.0011438  max=0.17082 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0825+1332_S_map.fits
wmodel /vlbi/uf001/uva//J0825+1332_S_map.mod
! Writing 476 model components to file: /vlbi/uf001/uva//J0825+1332_S_map.mod
wobs   /vlbi/uf001/uva//J0825+1332_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0825+1332_S_uvs.fits
wwins  /vlbi/uf001/uva//J0825+1332_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0825+1332_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.170815 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225281 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.395657 0.395657 0.791314 1.58263 3.16526 6.33051 12.661 25.3221 50.6441
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.17 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  758.232 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0825+1332_S_dfm.log closed on Sun Jan 13 23:56:18 2019