! Started logfile: /vlbi/uf001/uva//J0825+0309_X_b_dfm.log on Sun Jan 13 23:55:56 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0825+0309_X_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0825+0309_X_b_uva.fits ! AN table 1: 10 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.835714 visibilities/baseline/integration-bin. ! Found source: J0825+0309 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 2808 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0825+0309_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.489913Jy sigma=21.115361 ! Fit after self-cal, rms=0.344081Jy sigma=5.328006 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6788 mas, bmaj=3.23 mas, bpa=-19.67 degrees ! Estimated noise=1.31305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.676966 Jy ! Component: 100 - total flux cleaned = 0.933417 Jy ! Total flux subtracted in 100 components = 0.933417 Jy ! Clean residual min=-0.059219 max=0.121707 Jy/beam ! Clean residual mean=0.000009 rms=0.015010 Jy/beam ! Combined flux in latest and established models = 0.933417 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.933417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.310830Jy sigma=3.909201 ! Fit after self-cal, rms=0.309097Jy sigma=3.873464 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143124 Jy ! Component: 100 - total flux cleaned = 0.228555 Jy ! Total flux subtracted in 100 components = 0.228555 Jy ! Clean residual min=-0.039191 max=0.046719 Jy/beam ! Clean residual mean=-0.000001 rms=0.008763 Jy/beam ! Combined flux in latest and established models = 1.16197 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 1.16197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.181644Jy sigma=2.262093 ! Fit after self-cal, rms=0.180177Jy sigma=2.234807 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587384 Jy ! Component: 100 - total flux cleaned = 0.089332 Jy ! Total flux subtracted in 100 components = 0.089332 Jy ! Clean residual min=-0.035040 max=0.040220 Jy/beam ! Clean residual mean=-0.000004 rms=0.007063 Jy/beam ! Combined flux in latest and established models = 1.2513 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 1.2513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148920Jy sigma=1.851182 ! Fit after self-cal, rms=0.148296Jy sigma=1.840131 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8272 mas, bmaj=3.219 mas, bpa=-18.86 degrees ! Estimated noise=1.07404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02028 Jy ! Component: 100 - total flux cleaned = 0.025625 Jy ! Component: 150 - total flux cleaned = 0.0279038 Jy ! Component: 200 - total flux cleaned = 0.027115 Jy ! Total flux subtracted in 200 components = 0.027115 Jy ! Clean residual min=-0.027400 max=0.027939 Jy/beam ! Clean residual mean=-0.000011 rms=0.006409 Jy/beam ! Combined flux in latest and established models = 1.27842 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 35 components and 1.27842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120317Jy sigma=1.499990 ! Fit after self-cal, rms=0.119347Jy sigma=1.482697 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8272 x 3.219 at -18.86 degrees (North through East) ! Clean map min=-0.047803 max=0.95472 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.94 KP 1.04 ! LA 1.02 MK 1.02 NL 1.05 OV 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.95 KP 1.05 ! LA 1.01 MK 1.02 NL 1.04 OV 0.92 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.95 KP 1.04 ! LA 1.00 MK 1.02 NL 1.04 OV 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.92 KP 1.04 ! LA 1.02 MK 1.02 NL 1.04 OV 0.93 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.95 KP 1.06 ! LA 1.03 MK 1.00 NL 1.03 OV 0.93 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.95 KP 1.05 ! LA 1.01 MK 0.99 NL 1.03 OV 0.92 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.93 KP 1.04 ! LA 1.02 MK 0.99 NL 1.04 OV 0.94 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.95 KP 1.04 ! LA 1.00 MK 1.00 NL 1.06 OV 0.92 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.94 KP 1.03 ! LA 1.00 MK 1.01 NL 1.04 OV 0.93 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.92 KP 1.05 ! LA 1.00 MK 1.02 NL 1.04 OV 0.92 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.94 KP 1.04 ! LA 1.02 MK 0.99 NL 1.04 OV 0.92 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.95 KP 1.00 ! LA 1.03 MK 1.05 NL 1.06 OV 0.92 ! ! ! Fit before self-cal, rms=0.119347Jy sigma=1.482697 ! Fit after self-cal, rms=0.091901Jy sigma=1.211780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8234 mas, bmaj=3.181 mas, bpa=-18.7 degrees ! Estimated noise=1.06782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688982 Jy ! Component: 100 - total flux cleaned = 0.0103703 Jy ! Component: 150 - total flux cleaned = 0.0108159 Jy ! Component: 200 - total flux cleaned = 0.0112012 Jy ! Total flux subtracted in 200 components = 0.0112012 Jy ! Clean residual min=-0.017383 max=0.014380 Jy/beam ! Clean residual mean=-0.000008 rms=0.003677 Jy/beam ! Combined flux in latest and established models = 1.28962 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 1.28962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086565Jy sigma=1.138424 ! Fit after self-cal, rms=0.086450Jy sigma=1.134448 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086450Jy sigma=1.134448 ! Fit after self-cal, rms=0.070035Jy sigma=0.966244 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8262 mas, bmaj=3.185 mas, bpa=-18.85 degrees ! Estimated noise=1.07043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00872503 Jy ! Component: 100 - total flux cleaned = 0.0131671 Jy ! Component: 150 - total flux cleaned = 0.0160045 Jy ! Component: 200 - total flux cleaned = 0.0167855 Jy ! Total flux subtracted in 200 components = 0.0167855 Jy ! Clean residual min=-0.008588 max=0.010281 Jy/beam ! Clean residual mean=-0.000004 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 1.30641 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 1.30641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067595Jy sigma=0.937217 ! Fit after self-cal, rms=0.067441Jy sigma=0.934919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.4, 43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00875171 Jy ! Component: 100 - total flux cleaned = 0.0117584 Jy ! Component: 150 - total flux cleaned = 0.0139865 Jy ! Component: 200 - total flux cleaned = 0.0149988 Jy ! Total flux subtracted in 200 components = 0.0149988 Jy ! Clean residual min=-0.008017 max=0.007966 Jy/beam ! Clean residual mean=-0.000003 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 1.3214 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 104 components and 1.3214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065815Jy sigma=0.911599 ! Fit after self-cal, rms=0.065739Jy sigma=0.910437 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065739Jy sigma=0.910437 ! Fit after self-cal, rms=0.065181Jy sigma=0.904648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8264 mas, bmaj=3.182 mas, bpa=-18.84 degrees ! Estimated noise=1.07201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048738 Jy ! Component: 100 - total flux cleaned = 0.00731488 Jy ! Component: 150 - total flux cleaned = 0.00875896 Jy ! Component: 200 - total flux cleaned = 0.0103595 Jy ! Total flux subtracted in 200 components = 0.0103595 Jy ! Clean residual min=-0.006802 max=0.007235 Jy/beam ! Clean residual mean=-0.000003 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 1.33176 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 118 components and 1.33176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064079Jy sigma=0.890797 ! Fit after self-cal, rms=0.064004Jy sigma=0.889842 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776848 Jy ! Component: 100 - total flux cleaned = 0.00171293 Jy ! Component: 150 - total flux cleaned = 0.00220527 Jy ! Component: 200 - total flux cleaned = 0.0031422 Jy ! Total flux subtracted in 200 components = 0.0031422 Jy ! Clean residual min=-0.006564 max=0.006878 Jy/beam ! Clean residual mean=-0.000003 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 1.33491 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 133 components and 1.33491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063485Jy sigma=0.882759 ! Fit after self-cal, rms=0.063456Jy sigma=0.882318 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063456Jy sigma=0.882318 ! Fit after self-cal, rms=0.063221Jy sigma=0.879169 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.953 mas, bmaj=3.212 mas, bpa=-10.26 degrees ! Estimated noise=1.50977 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307872 Jy ! Component: 100 - total flux cleaned = 0.00435221 Jy ! Component: 150 - total flux cleaned = 0.00589933 Jy ! Component: 200 - total flux cleaned = 0.00698877 Jy ! Total flux subtracted in 200 components = 0.00698877 Jy ! Clean residual min=-0.009023 max=0.008344 Jy/beam ! Clean residual mean=-0.000004 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 1.34189 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 149 components and 1.34189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062672Jy sigma=0.877539 ! Fit after self-cal, rms=0.062625Jy sigma=0.876600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122473 Jy ! Component: 100 - total flux cleaned = 0.00193649 Jy ! Component: 150 - total flux cleaned = 0.00310322 Jy ! Component: 200 - total flux cleaned = 0.00408816 Jy ! Total flux subtracted in 200 components = 0.00408816 Jy ! Clean residual min=-0.008297 max=0.007850 Jy/beam ! Clean residual mean=-0.000004 rms=0.002073 Jy/beam ! Combined flux in latest and established models = 1.34598 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 166 components and 1.34598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062454Jy sigma=0.876188 ! Fit after self-cal, rms=0.062430Jy sigma=0.875791 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8269 mas, bmaj=3.179 mas, bpa=-18.83 degrees ! Estimated noise=1.07424 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8269 x 3.179 at -18.83 degrees (North through East) ! Clean map min=-0.030399 max=0.94471 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062430Jy sigma=0.875791 ! Fit after self-cal, rms=0.059292Jy sigma=0.814302 ! Inverting map and beam ! Estimated beam: bmin=0.8278 mas, bmaj=3.178 mas, bpa=-18.81 degrees ! Estimated noise=1.07543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406175 Jy ! Component: 100 - total flux cleaned = 0.00477614 Jy ! Component: 150 - total flux cleaned = 0.00466649 Jy ! Component: 200 - total flux cleaned = 0.00444218 Jy ! Total flux subtracted in 200 components = 0.00444218 Jy ! Clean residual min=-0.005749 max=0.006033 Jy/beam ! Clean residual mean=-0.000001 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 1.35042 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 182 components and 1.35042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058760Jy sigma=0.805100 ! Fit after self-cal, rms=0.058732Jy sigma=0.804636 ! Inverting map ! Added new window around map position (6.2, 21.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540193 Jy ! Component: 100 - total flux cleaned = 0.00716839 Jy ! Component: 150 - total flux cleaned = 0.00716426 Jy ! Component: 200 - total flux cleaned = 0.00716097 Jy ! Total flux subtracted in 200 components = 0.00716097 Jy ! Clean residual min=-0.005188 max=0.005518 Jy/beam ! Clean residual mean=-0.000001 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 1.35758 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 201 components and 1.35758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058073Jy sigma=0.794073 ! Fit after self-cal, rms=0.058049Jy sigma=0.793782 ! Inverting map ! Added new window around map position (-37.4, -17.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237529 Jy ! Component: 100 - total flux cleaned = 0.00260883 Jy ! Component: 150 - total flux cleaned = 0.00280887 Jy ! Component: 200 - total flux cleaned = 0.0031875 Jy ! Total flux subtracted in 200 components = 0.0031875 Jy ! Clean residual min=-0.004737 max=0.004796 Jy/beam ! Clean residual mean=-0.000000 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 1.36077 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 217 components and 1.36077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057469Jy sigma=0.786164 ! Fit after self-cal, rms=0.057465Jy sigma=0.785784 ! Inverting map ! Added new window around map position (-4.4, -23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311417 Jy ! Component: 100 - total flux cleaned = 0.00450179 Jy ! Component: 150 - total flux cleaned = 0.00522028 Jy ! Component: 200 - total flux cleaned = 0.00559103 Jy ! Total flux subtracted in 200 components = 0.00559103 Jy ! Clean residual min=-0.004314 max=0.003967 Jy/beam ! Clean residual mean=-0.000000 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 1.36636 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 242 components and 1.36636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056972Jy sigma=0.778302 ! Fit after self-cal, rms=0.056955Jy sigma=0.778128 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056955Jy sigma=0.778128 ! Fit after self-cal, rms=0.056852Jy sigma=0.776569 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6844 mas, bmaj=3.201 mas, bpa=-19.68 degrees ! Estimated noise=1.31214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.673275 Jy ! Component: 100 - total flux cleaned = 0.931561 Jy ! Component: 150 - total flux cleaned = 1.0718 Jy ! Component: 200 - total flux cleaned = 1.15723 Jy ! Total flux subtracted in 200 components = 1.15723 Jy ! Clean residual min=-0.020303 max=0.044828 Jy/beam ! Clean residual mean=0.000004 rms=0.005818 Jy/beam ! Combined flux in latest and established models = 1.15723 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.15723 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8278 mas, bmaj=3.177 mas, bpa=-18.81 degrees ! Estimated noise=1.07623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0736874 Jy ! Component: 100 - total flux cleaned = 0.11284 Jy ! Component: 150 - total flux cleaned = 0.134153 Jy ! Component: 200 - total flux cleaned = 0.142467 Jy ! Total flux subtracted in 200 components = 0.142467 Jy ! Clean residual min=-0.011363 max=0.012242 Jy/beam ! Clean residual mean=-0.000001 rms=0.002611 Jy/beam ! Combined flux in latest and established models = 1.29969 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 1.29969 Jy ! Inverting map ! Added new window around map position (3.2, -42.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911001 Jy ! Component: 100 - total flux cleaned = 0.0161407 Jy ! Component: 150 - total flux cleaned = 0.0209978 Jy ! Component: 200 - total flux cleaned = 0.025244 Jy ! Total flux subtracted in 200 components = 0.025244 Jy ! Clean residual min=-0.008659 max=0.008307 Jy/beam ! Clean residual mean=-0.000001 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 1.32494 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 62 components and 1.32494 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.952 mas, bmaj=3.211 mas, bpa=-10.3 degrees ! Estimated noise=1.51077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00976927 Jy ! Component: 100 - total flux cleaned = 0.0153723 Jy ! Component: 150 - total flux cleaned = 0.0196583 Jy ! Component: 200 - total flux cleaned = 0.0221978 Jy ! Total flux subtracted in 200 components = 0.0221978 Jy ! Clean residual min=-0.007729 max=0.007332 Jy/beam ! Clean residual mean=-0.000004 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 1.34714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272193 Jy ! Component: 100 - total flux cleaned = 0.00559393 Jy ! Component: 150 - total flux cleaned = 0.00737462 Jy ! Component: 200 - total flux cleaned = 0.00954372 Jy ! Total flux subtracted in 200 components = 0.00954372 Jy ! Clean residual min=-0.006664 max=0.006263 Jy/beam ! Clean residual mean=-0.000003 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 1.35668 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 130 components and 1.35668 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8278 mas, bmaj=3.177 mas, bpa=-18.81 degrees ! Estimated noise=1.07623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559193 Jy ! Component: 100 - total flux cleaned = 0.00149723 Jy ! Component: 150 - total flux cleaned = 0.0023208 Jy ! Component: 200 - total flux cleaned = 0.0033622 Jy ! Total flux subtracted in 200 components = 0.0033622 Jy ! Clean residual min=-0.005923 max=0.005367 Jy/beam ! Clean residual mean=-0.000001 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 1.36004 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 166 components and 1.36004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057753Jy sigma=0.789885 ! Fit after self-cal, rms=0.057590Jy sigma=0.786059 wmodel J0825+0309_X_b_map.mod ! Writing 166 model components to file: J0825+0309_X_b_map.mod wobs J0825+0309_X_b_uvs.fits ! Writing UV FITS file: J0825+0309_X_b_uvs.fits wwins J0825+0309_X_b_map.win ! wwins: Wrote 7 windows to J0825+0309_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101068 Jy ! Component: 100 - total flux cleaned = -0.00101092 Jy ! Component: 150 - total flux cleaned = -0.00159608 Jy ! Component: 200 - total flux cleaned = -0.00215149 Jy ! Component: 250 - total flux cleaned = -0.00274477 Jy ! Component: 300 - total flux cleaned = -0.00318889 Jy ! Component: 350 - total flux cleaned = -0.00361746 Jy ! Component: 400 - total flux cleaned = -0.00379563 Jy ! Component: 450 - total flux cleaned = -0.00408417 Jy ! Component: 500 - total flux cleaned = -0.00408352 Jy ! Component: 550 - total flux cleaned = -0.00430451 Jy ! Component: 600 - total flux cleaned = -0.00451913 Jy ! Component: 650 - total flux cleaned = -0.00478296 Jy ! Component: 700 - total flux cleaned = -0.00483484 Jy ! Component: 750 - total flux cleaned = -0.00498706 Jy ! Component: 800 - total flux cleaned = -0.00503699 Jy ! Component: 850 - total flux cleaned = -0.00533164 Jy ! Component: 900 - total flux cleaned = -0.00547563 Jy ! Component: 950 - total flux cleaned = -0.00547576 Jy ! Component: 1000 - total flux cleaned = -0.00570917 Jy ! Component: 1050 - total flux cleaned = -0.0057558 Jy ! Component: 1100 - total flux cleaned = -0.0059806 Jy ! Component: 1150 - total flux cleaned = -0.00628928 Jy ! Component: 1200 - total flux cleaned = -0.00650517 Jy ! Component: 1250 - total flux cleaned = -0.00659089 Jy ! Component: 1300 - total flux cleaned = -0.00684239 Jy ! Component: 1350 - total flux cleaned = -0.00700661 Jy ! Component: 1400 - total flux cleaned = -0.0071277 Jy ! Component: 1450 - total flux cleaned = -0.00728722 Jy ! Component: 1500 - total flux cleaned = -0.00740436 Jy ! Component: 1550 - total flux cleaned = -0.00755988 Jy ! Component: 1600 - total flux cleaned = -0.00771193 Jy ! Component: 1650 - total flux cleaned = -0.00774942 Jy ! Component: 1700 - total flux cleaned = -0.00786086 Jy ! Component: 1750 - total flux cleaned = -0.00800691 Jy ! Component: 1800 - total flux cleaned = -0.00804302 Jy ! Component: 1850 - total flux cleaned = -0.00800741 Jy ! Component: 1900 - total flux cleaned = -0.00811284 Jy ! Component: 1950 - total flux cleaned = -0.00818195 Jy ! Component: 2000 - total flux cleaned = -0.00811386 Jy ! Component: 2050 - total flux cleaned = -0.00818103 Jy ! Component: 2100 - total flux cleaned = -0.00814813 Jy ! Component: 2150 - total flux cleaned = -0.00811565 Jy ! Component: 2200 - total flux cleaned = -0.00818119 Jy ! Component: 2250 - total flux cleaned = -0.00818103 Jy ! Component: 2300 - total flux cleaned = -0.00814896 Jy ! Component: 2350 - total flux cleaned = -0.00811741 Jy ! Component: 2400 - total flux cleaned = -0.0079935 Jy ! Component: 2450 - total flux cleaned = -0.00802462 Jy ! Component: 2500 - total flux cleaned = -0.00793353 Jy ! Component: 2550 - total flux cleaned = -0.00784387 Jy ! Component: 2600 - total flux cleaned = -0.00784428 Jy ! Component: 2650 - total flux cleaned = -0.00772715 Jy ! Component: 2700 - total flux cleaned = -0.00772748 Jy ! Component: 2750 - total flux cleaned = -0.00767007 Jy ! Component: 2800 - total flux cleaned = -0.00766991 Jy ! Component: 2850 - total flux cleaned = -0.00767007 Jy ! Component: 2900 - total flux cleaned = -0.00753172 Jy ! Component: 2950 - total flux cleaned = -0.00755885 Jy ! Component: 3000 - total flux cleaned = -0.00753217 Jy ! Component: 3050 - total flux cleaned = -0.00742518 Jy ! Component: 3100 - total flux cleaned = -0.0074251 Jy ! Component: 3150 - total flux cleaned = -0.00739888 Jy ! Component: 3200 - total flux cleaned = -0.00734654 Jy ! Component: 3250 - total flux cleaned = -0.00732128 Jy ! Component: 3300 - total flux cleaned = -0.00724539 Jy ! Component: 3350 - total flux cleaned = -0.00724561 Jy ! Component: 3400 - total flux cleaned = -0.00717041 Jy ! Component: 3450 - total flux cleaned = -0.00714559 Jy ! Component: 3500 - total flux cleaned = -0.00707197 Jy ! Component: 3550 - total flux cleaned = -0.00692627 Jy ! Component: 3600 - total flux cleaned = -0.00697434 Jy ! Component: 3650 - total flux cleaned = -0.00687883 Jy ! Component: 3700 - total flux cleaned = -0.00687875 Jy ! Component: 3750 - total flux cleaned = -0.00683179 Jy ! Component: 3800 - total flux cleaned = -0.00678545 Jy ! Component: 3850 - total flux cleaned = -0.00671637 Jy ! Component: 3900 - total flux cleaned = -0.00673904 Jy ! Component: 3950 - total flux cleaned = -0.00667081 Jy ! Component: 4000 - total flux cleaned = -0.00669342 Jy ! Component: 4050 - total flux cleaned = -0.00660422 Jy ! Total flux subtracted in 4096 components = -0.00651555 Jy ! Clean residual min=-0.001353 max=0.001224 Jy/beam ! Clean residual mean=0.000000 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 1.35353 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 455 components and 1.35353 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0825+0309_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8278 x 3.177 at -18.81 degrees (North through East) ! Clean map min=-0.016031 max=0.93689 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0825+0309_X_b_map.fits wmodel /vlbi/uf001/uva//J0825+0309_X_b_map.mod ! Writing 455 model components to file: /vlbi/uf001/uva//J0825+0309_X_b_map.mod wobs /vlbi/uf001/uva//J0825+0309_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0825+0309_X_b_uvs.fits wwins /vlbi/uf001/uva//J0825+0309_X_b_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uva//J0825+0309_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.936894 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000389983 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.124875 0.124875 0.24975 0.499501 0.999001 1.998 3.99601 7.99201 15.984 31.968 63.9361 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.936 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2402.4 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0825+0309_X_b_dfm.log closed on Sun Jan 13 23:56:01 2019