! Started logfile: /vlbi/uf001/uva//J0825+0309_S_b_dfm.log on Sun Jan 13 23:55:51 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0825+0309_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0825+0309_S_b_uva.fits
! AN table 1: 10 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.835714 visibilities/baseline/integration-bin.
! Found source: J0825+0309
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 702 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0825+0309_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.810386Jy  sigma=21.892917
! Fit after  self-cal, rms=0.536995Jy  sigma=6.277592
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.912 mas, bmaj=12.06 mas, bpa=-19.11 degrees
! Estimated noise=2.98902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.09808 Jy
! Component: 100  -  total flux cleaned = 1.36493 Jy
! Total flux subtracted in 100 components = 1.36493 Jy
! Clean residual min=-0.071921 max=0.109058 Jy/beam
! Clean residual mean=-0.000224 rms=0.021082 Jy/beam
! Combined flux in latest and established models = 1.36493 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.36493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.301214Jy  sigma=3.308943
! Fit after  self-cal, rms=0.301184Jy  sigma=3.308877
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.272 mas, bmaj=12.34 mas, bpa=-18.75 degrees
! Estimated noise=2.69453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150083 Jy
! Component: 100  -  total flux cleaned = 0.237992 Jy
! Component: 150  -  total flux cleaned = 0.294303 Jy
! Component: 200  -  total flux cleaned = 0.333828 Jy
! Total flux subtracted in 200 components = 0.333828 Jy
! Clean residual min=-0.044540 max=0.048128 Jy/beam
! Clean residual mean=-0.000130 rms=0.013138 Jy/beam
! Combined flux in latest and established models = 1.69876 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 68 components and 1.69876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.205481Jy  sigma=2.103896
! Fit after  self-cal, rms=0.205398Jy  sigma=2.103197
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.272 x 12.34 at -18.75 degrees (North through East)
! Clean map  min=-0.043446  max=1.4379 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.91     HN        1.02     KP        0.95     
!   LA        0.95     MK        1.04     NL        1.03     OV        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.35     FD        0.92     HN        1.03     KP        0.97     
!   LA        0.95     MK        1.03     NL        0.98     OV        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.02     KP        0.98     
!   LA        0.95     MK        1.03     NL        1.06     OV        0.98     
! 
! 
! Fit before self-cal, rms=0.205398Jy  sigma=2.103197
! Fit after  self-cal, rms=0.171073Jy  sigma=1.511125
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=12.56 mas, bpa=-18.63 degrees
! Estimated noise=2.7059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0148027 Jy
! Component: 100  -  total flux cleaned = -0.0251068 Jy
! Component: 150  -  total flux cleaned = -0.0326132 Jy
! Component: 200  -  total flux cleaned = -0.0373042 Jy
! Total flux subtracted in 200 components = -0.0373042 Jy
! Clean residual min=-0.031850 max=0.027581 Jy/beam
! Clean residual mean=-0.000004 rms=0.008650 Jy/beam
! Combined flux in latest and established models = 1.66146 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 85 components and 1.66146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.169900Jy  sigma=1.482128
! Fit after  self-cal, rms=0.169900Jy  sigma=1.481758
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.169900Jy  sigma=1.481758
! Fit after  self-cal, rms=0.128568Jy  sigma=1.064152
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=12.74 mas, bpa=-18.63 degrees
! Estimated noise=2.71446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0151259 Jy
! Component: 100  -  total flux cleaned = -0.0180612 Jy
! Component: 150  -  total flux cleaned = -0.0204538 Jy
! Component: 200  -  total flux cleaned = -0.0218915 Jy
! Total flux subtracted in 200 components = -0.0218915 Jy
! Clean residual min=-0.023530 max=0.016820 Jy/beam
! Clean residual mean=-0.000014 rms=0.005225 Jy/beam
! Combined flux in latest and established models = 1.63956 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 1.63956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126433Jy  sigma=1.019265
! Fit after  self-cal, rms=0.126586Jy  sigma=1.019007
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184815 Jy
! Component: 100  -  total flux cleaned = -0.000419108 Jy
! Component: 150  -  total flux cleaned = -0.000829977 Jy
! Component: 200  -  total flux cleaned = -0.000831332 Jy
! Total flux subtracted in 200 components = -0.000831332 Jy
! Clean residual min=-0.022560 max=0.017256 Jy/beam
! Clean residual mean=-0.000015 rms=0.005096 Jy/beam
! Combined flux in latest and established models = 1.63873 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 107 components and 1.63873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126143Jy  sigma=1.006569
! Fit after  self-cal, rms=0.126144Jy  sigma=1.006460
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126144Jy  sigma=1.006460
! Fit after  self-cal, rms=0.126239Jy  sigma=0.988507
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.297 mas, bmaj=12.84 mas, bpa=-18.63 degrees
! Estimated noise=2.71631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0109223 Jy
! Component: 100  -  total flux cleaned = -0.0131257 Jy
! Component: 150  -  total flux cleaned = -0.014449 Jy
! Component: 200  -  total flux cleaned = -0.0155954 Jy
! Total flux subtracted in 200 components = -0.0155954 Jy
! Clean residual min=-0.020237 max=0.015356 Jy/beam
! Clean residual mean=-0.000011 rms=0.004537 Jy/beam
! Combined flux in latest and established models = 1.62314 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 113 components and 1.62314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124882Jy  sigma=0.960374
! Fit after  self-cal, rms=0.124887Jy  sigma=0.960316
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000752725 Jy
! Component: 100  -  total flux cleaned = -0.00110646 Jy
! Component: 150  -  total flux cleaned = -0.00127053 Jy
! Component: 200  -  total flux cleaned = -0.00111658 Jy
! Total flux subtracted in 200 components = -0.00111658 Jy
! Clean residual min=-0.019413 max=0.015406 Jy/beam
! Clean residual mean=-0.000011 rms=0.004452 Jy/beam
! Combined flux in latest and established models = 1.62202 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 116 components and 1.62202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124557Jy  sigma=0.952891
! Fit after  self-cal, rms=0.124562Jy  sigma=0.952844
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124562Jy  sigma=0.952844
! Fit after  self-cal, rms=0.124898Jy  sigma=0.941051
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.398 mas, bmaj=12.88 mas, bpa=-13.31 degrees
! Estimated noise=3.34343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00998973 Jy
! Component: 100  -  total flux cleaned = -0.0113805 Jy
! Component: 150  -  total flux cleaned = -0.0117254 Jy
! Component: 200  -  total flux cleaned = -0.0115823 Jy
! Total flux subtracted in 200 components = -0.0115823 Jy
! Clean residual min=-0.023820 max=0.017426 Jy/beam
! Clean residual mean=-0.000011 rms=0.005766 Jy/beam
! Combined flux in latest and established models = 1.61044 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 123 components and 1.61044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124671Jy  sigma=0.930712
! Fit after  self-cal, rms=0.124656Jy  sigma=0.930637
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00042891 Jy
! Component: 100  -  total flux cleaned = 0.000692836 Jy
! Component: 150  -  total flux cleaned = 0.00106978 Jy
! Component: 200  -  total flux cleaned = 0.00131306 Jy
! Total flux subtracted in 200 components = 0.00131306 Jy
! Clean residual min=-0.023526 max=0.017257 Jy/beam
! Clean residual mean=-0.000010 rms=0.005723 Jy/beam
! Combined flux in latest and established models = 1.61175 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 125 components and 1.61175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124430Jy  sigma=0.928183
! Fit after  self-cal, rms=0.124426Jy  sigma=0.928132
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.297 mas, bmaj=12.92 mas, bpa=-18.63 degrees
! Estimated noise=2.71723 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.297 x 12.92 at -18.63 degrees (North through East)
! Clean map  min=-0.019704  max=1.4357 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124426Jy  sigma=0.928132
! Fit after  self-cal, rms=0.120327Jy  sigma=0.845646
! Inverting map and beam 
! Estimated beam: bmin=3.304 mas, bmaj=12.95 mas, bpa=-18.63 degrees
! Estimated noise=2.72076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00779926 Jy
! Component: 100  -  total flux cleaned = -0.00878514 Jy
! Component: 150  -  total flux cleaned = -0.00937817 Jy
! Component: 200  -  total flux cleaned = -0.0102607 Jy
! Total flux subtracted in 200 components = -0.0102607 Jy
! Clean residual min=-0.017318 max=0.013535 Jy/beam
! Clean residual mean=-0.000007 rms=0.003796 Jy/beam
! Combined flux in latest and established models = 1.60149 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 130 components and 1.60149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119309Jy  sigma=0.827538
! Fit after  self-cal, rms=0.119315Jy  sigma=0.827524
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000627044 Jy
! Component: 100  -  total flux cleaned = -0.000910838 Jy
! Component: 150  -  total flux cleaned = -0.00104372 Jy
! Component: 200  -  total flux cleaned = -0.000794771 Jy
! Total flux subtracted in 200 components = -0.000794771 Jy
! Clean residual min=-0.016868 max=0.013540 Jy/beam
! Clean residual mean=-0.000008 rms=0.003750 Jy/beam
! Combined flux in latest and established models = 1.6007 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 136 components and 1.6007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118975Jy  sigma=0.823057
! Fit after  self-cal, rms=0.118977Jy  sigma=0.823037
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118977Jy  sigma=0.823037
! Fit after  self-cal, rms=0.119340Jy  sigma=0.815598
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.95 mas, bmaj=12.68 mas, bpa=-18.97 degrees
! Estimated noise=3.05509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.11583 Jy
! Component: 100  -  total flux cleaned = 1.36069 Jy
! Component: 150  -  total flux cleaned = 1.44506 Jy
! Component: 200  -  total flux cleaned = 1.49441 Jy
! Total flux subtracted in 200 components = 1.49441 Jy
! Clean residual min=-0.020664 max=0.026151 Jy/beam
! Clean residual mean=-0.000047 rms=0.005941 Jy/beam
! Combined flux in latest and established models = 1.49441 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 1.49441 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.302 mas, bmaj=13.01 mas, bpa=-18.64 degrees
! Estimated noise=2.72097 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0361257 Jy
! Component: 100  -  total flux cleaned = 0.0586024 Jy
! Component: 150  -  total flux cleaned = 0.0741122 Jy
! Component: 200  -  total flux cleaned = 0.0852668 Jy
! Total flux subtracted in 200 components = 0.0852668 Jy
! Clean residual min=-0.013048 max=0.013710 Jy/beam
! Clean residual mean=-0.000013 rms=0.003597 Jy/beam
! Combined flux in latest and established models = 1.57968 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 59 components and 1.57968 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.403 mas, bmaj=12.96 mas, bpa=-13.49 degrees
! Estimated noise=3.33691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111078 Jy
! Component: 100  -  total flux cleaned = 0.0178562 Jy
! Component: 150  -  total flux cleaned = 0.0201996 Jy
! Component: 200  -  total flux cleaned = 0.0218341 Jy
! Total flux subtracted in 200 components = 0.0218341 Jy
! Clean residual min=-0.019155 max=0.014842 Jy/beam
! Clean residual mean=-0.000003 rms=0.004713 Jy/beam
! Combined flux in latest and established models = 1.60151 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013555 Jy
! Component: 100  -  total flux cleaned = 0.00222482 Jy
! Component: 150  -  total flux cleaned = 0.00284923 Jy
! Component: 200  -  total flux cleaned = 0.00296863 Jy
! Total flux subtracted in 200 components = 0.00296863 Jy
! Clean residual min=-0.018995 max=0.014280 Jy/beam
! Clean residual mean=-0.000000 rms=0.004684 Jy/beam
! Combined flux in latest and established models = 1.60448 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 83 components and 1.60448 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.302 mas, bmaj=13.01 mas, bpa=-18.64 degrees
! Estimated noise=2.72097 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148254 Jy
! Component: 100  -  total flux cleaned = 0.00107686 Jy
! Component: 150  -  total flux cleaned = 0.00161309 Jy
! Component: 200  -  total flux cleaned = 0.0018521 Jy
! Total flux subtracted in 200 components = 0.0018521 Jy
! Clean residual min=-0.014962 max=0.011237 Jy/beam
! Clean residual mean=-0.000001 rms=0.003357 Jy/beam
! Combined flux in latest and established models = 1.60633 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 1.60633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116425Jy  sigma=0.797637
! Fit after  self-cal, rms=0.116509Jy  sigma=0.797454
wmodel J0825+0309_S_b_map.mod
! Writing 96 model components to file: J0825+0309_S_b_map.mod
wobs   J0825+0309_S_b_uvs.fits
! Writing UV FITS file: J0825+0309_S_b_uvs.fits
wwins  J0825+0309_S_b_map.win
! wwins: Wrote 1 windows to J0825+0309_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0064589 Jy
! Component: 100  -  total flux cleaned = -0.00974022 Jy
! Component: 150  -  total flux cleaned = -0.00995204 Jy
! Component: 200  -  total flux cleaned = -0.00995641 Jy
! Component: 250  -  total flux cleaned = -0.0094359 Jy
! Component: 300  -  total flux cleaned = -0.00811978 Jy
! Component: 350  -  total flux cleaned = -0.00702103 Jy
! Component: 400  -  total flux cleaned = -0.00657402 Jy
! Component: 450  -  total flux cleaned = -0.00556869 Jy
! Component: 500  -  total flux cleaned = -0.00474112 Jy
! Component: 550  -  total flux cleaned = -0.0038098 Jy
! Component: 600  -  total flux cleaned = -0.00329892 Jy
! Component: 650  -  total flux cleaned = -0.00317725 Jy
! Component: 700  -  total flux cleaned = -0.00293634 Jy
! Component: 750  -  total flux cleaned = -0.00281981 Jy
! Component: 800  -  total flux cleaned = -0.00259165 Jy
! Component: 850  -  total flux cleaned = -0.00215101 Jy
! Component: 900  -  total flux cleaned = -0.00172165 Jy
! Component: 950  -  total flux cleaned = -0.00119535 Jy
! Component: 1000  -  total flux cleaned = -0.000477369 Jy
! Component: 1050  -  total flux cleaned = 0.000121039 Jy
! Component: 1100  -  total flux cleaned = 0.000414051 Jy
! Component: 1150  -  total flux cleaned = 0.00108208 Jy
! Component: 1200  -  total flux cleaned = 0.00173582 Jy
! Component: 1250  -  total flux cleaned = 0.00246507 Jy
! Component: 1300  -  total flux cleaned = 0.00317569 Jy
! Component: 1350  -  total flux cleaned = 0.00369571 Jy
! Component: 1400  -  total flux cleaned = 0.00403569 Jy
! Component: 1450  -  total flux cleaned = 0.00445349 Jy
! Component: 1500  -  total flux cleaned = 0.00494438 Jy
! Component: 1550  -  total flux cleaned = 0.00534291 Jy
! Component: 1600  -  total flux cleaned = 0.00549803 Jy
! Component: 1650  -  total flux cleaned = 0.00557358 Jy
! Component: 1700  -  total flux cleaned = 0.00564885 Jy
! Component: 1750  -  total flux cleaned = 0.0056475 Jy
! Component: 1800  -  total flux cleaned = 0.00579218 Jy
! Component: 1850  -  total flux cleaned = 0.00565064 Jy
! Component: 1900  -  total flux cleaned = 0.00600229 Jy
! Component: 1950  -  total flux cleaned = 0.00606929 Jy
! Component: 2000  -  total flux cleaned = 0.00640862 Jy
! Component: 2050  -  total flux cleaned = 0.00654057 Jy
! Component: 2100  -  total flux cleaned = 0.00667093 Jy
! Component: 2150  -  total flux cleaned = 0.00680103 Jy
! Component: 2200  -  total flux cleaned = 0.00699251 Jy
! Component: 2250  -  total flux cleaned = 0.00686768 Jy
! Component: 2300  -  total flux cleaned = 0.00699315 Jy
! Component: 2350  -  total flux cleaned = 0.00724059 Jy
! Component: 2400  -  total flux cleaned = 0.0073625 Jy
! Component: 2450  -  total flux cleaned = 0.00760277 Jy
! Component: 2500  -  total flux cleaned = 0.0076614 Jy
! Component: 2550  -  total flux cleaned = 0.00783757 Jy
! Component: 2600  -  total flux cleaned = 0.00783661 Jy
! Component: 2650  -  total flux cleaned = 0.00777904 Jy
! Component: 2700  -  total flux cleaned = 0.00800675 Jy
! Component: 2750  -  total flux cleaned = 0.00823123 Jy
! Component: 2800  -  total flux cleaned = 0.0086207 Jy
! Component: 2850  -  total flux cleaned = 0.00878544 Jy
! Component: 2900  -  total flux cleaned = 0.00894851 Jy
! Component: 2950  -  total flux cleaned = 0.00911081 Jy
! Component: 3000  -  total flux cleaned = 0.00943125 Jy
! Component: 3050  -  total flux cleaned = 0.00964328 Jy
! Component: 3100  -  total flux cleaned = 0.00985307 Jy
! Component: 3150  -  total flux cleaned = 0.00990534 Jy
! Component: 3200  -  total flux cleaned = 0.0102142 Jy
! Component: 3250  -  total flux cleaned = 0.0103671 Jy
! Component: 3300  -  total flux cleaned = 0.0105691 Jy
! Component: 3350  -  total flux cleaned = 0.0106192 Jy
! Component: 3400  -  total flux cleaned = 0.0109665 Jy
! Component: 3450  -  total flux cleaned = 0.0110151 Jy
! Component: 3500  -  total flux cleaned = 0.0110639 Jy
! Component: 3550  -  total flux cleaned = 0.0113061 Jy
! Component: 3600  -  total flux cleaned = 0.0114022 Jy
! Component: 3650  -  total flux cleaned = 0.0113555 Jy
! Component: 3700  -  total flux cleaned = 0.0116387 Jy
! Component: 3750  -  total flux cleaned = 0.0117325 Jy
! Component: 3800  -  total flux cleaned = 0.0118254 Jy
! Component: 3850  -  total flux cleaned = 0.0118249 Jy
! Component: 3900  -  total flux cleaned = 0.0118251 Jy
! Component: 3950  -  total flux cleaned = 0.0117801 Jy
! Component: 4000  -  total flux cleaned = 0.0118257 Jy
! Component: 4050  -  total flux cleaned = 0.0117807 Jy
! Total flux subtracted in 4096 components = 0.0119592 Jy
! Clean residual min=-0.002964 max=0.002352 Jy/beam
! Clean residual mean=0.000000 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 1.61829 Jy
keep
! Adding 343 model components to the UV plane model.
! The established model now contains 439 components and 1.61829 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0825+0309_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.302 x 13.01 at -18.64 degrees (North through East)
! Clean map  min=-0.0073719  max=1.4433 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0825+0309_S_b_map.fits
wmodel /vlbi/uf001/uva//J0825+0309_S_b_map.mod
! Writing 439 model components to file: /vlbi/uf001/uva//J0825+0309_S_b_map.mod
wobs   /vlbi/uf001/uva//J0825+0309_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0825+0309_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0825+0309_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0825+0309_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.44332 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000859106 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.178569 0.178569 0.357137 0.714275 1.42855 2.8571 5.7142 11.4284 22.8568 45.7136 91.4272
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.443 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1680.03 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0825+0309_S_b_dfm.log closed on Sun Jan 13 23:55:55 2019