! Started logfile: /vlbi/uf001/uva//J0814-1806_S_dfm.log on Sun Jan 13 23:50:57 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0814-1806_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0814-1806_S_uva.fits
! AN table 1: 72 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.730324 visibilities/baseline/integration-bin.
! Found source: J0814-1806
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5679 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0814-1806_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.049204Jy  sigma=16.659636
! Fit after  self-cal, rms=0.739540Jy  sigma=11.682855
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.547 mas, bmaj=6.174 mas, bpa=1.85 degrees
! Estimated noise=0.786482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194684 Jy
! Component: 100  -  total flux cleaned = 0.25887 Jy
! Total flux subtracted in 100 components = 0.25887 Jy
! Clean residual min=-0.018712 max=0.062829 Jy/beam
! Clean residual mean=-0.000118 rms=0.006274 Jy/beam
! Combined flux in latest and established models = 0.25887 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.25887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133251Jy  sigma=2.067919
! Fit after  self-cal, rms=0.133242Jy  sigma=2.066896
! Inverting map 
! Added new window around map position (23, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0537497 Jy
! Component: 100  -  total flux cleaned = 0.0838875 Jy
! Total flux subtracted in 100 components = 0.0838875 Jy
! Clean residual min=-0.014104 max=0.026233 Jy/beam
! Clean residual mean=-0.000072 rms=0.003839 Jy/beam
! Combined flux in latest and established models = 0.342757 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 0.342757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104712Jy  sigma=1.597092
! Fit after  self-cal, rms=0.100872Jy  sigma=1.541247
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268933 Jy
! Component: 100  -  total flux cleaned = 0.0431621 Jy
! Total flux subtracted in 100 components = 0.0431621 Jy
! Clean residual min=-0.010440 max=0.013961 Jy/beam
! Clean residual mean=-0.000046 rms=0.002458 Jy/beam
! Combined flux in latest and established models = 0.385919 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.385919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091293Jy  sigma=1.378380
! Fit after  self-cal, rms=0.090472Jy  sigma=1.366701
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.93 mas, bmaj=7.167 mas, bpa=1.491 degrees
! Estimated noise=0.60222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0190534 Jy
! Component: 100  -  total flux cleaned = 0.031628 Jy
! Component: 150  -  total flux cleaned = 0.0407553 Jy
! Component: 200  -  total flux cleaned = 0.0474896 Jy
! Total flux subtracted in 200 components = 0.0474896 Jy
! Clean residual min=-0.008362 max=0.012464 Jy/beam
! Clean residual mean=-0.000041 rms=0.002345 Jy/beam
! Combined flux in latest and established models = 0.433409 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 72 components and 0.433409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085700Jy  sigma=1.282097
! Fit after  self-cal, rms=0.085364Jy  sigma=1.277079
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.93 x 7.167 at 1.491 degrees (North through East)
! Clean map  min=-0.0076827  max=0.24607 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.93     HN        1.07     LA        0.89     
!   MK        1.03     NL        1.11     OV        1.05     PT        0.95     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.91     HN        1.06     LA        0.92     
!   MK        1.01     NL        1.07     OV        1.01     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.94     HN        1.07     LA        0.91     
!   MK        1.02     NL        1.06     OV        1.04     PT        1.00     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.085364Jy  sigma=1.277079
! Fit after  self-cal, rms=0.079734Jy  sigma=1.184672
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.962 mas, bmaj=7.219 mas, bpa=1.79 degrees
! Estimated noise=0.600056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00661338 Jy
! Component: 100  -  total flux cleaned = 0.00864155 Jy
! Component: 150  -  total flux cleaned = 0.00928273 Jy
! Component: 200  -  total flux cleaned = 0.00960073 Jy
! Total flux subtracted in 200 components = 0.00960073 Jy
! Clean residual min=-0.003337 max=0.003812 Jy/beam
! Clean residual mean=-0.000006 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.443009 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 0.443009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079080Jy  sigma=1.173538
! Fit after  self-cal, rms=0.079091Jy  sigma=1.172687
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079091Jy  sigma=1.172687
! Fit after  self-cal, rms=0.079250Jy  sigma=1.167331
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.965 mas, bmaj=7.233 mas, bpa=1.902 degrees
! Estimated noise=0.602267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170904 Jy
! Component: 100  -  total flux cleaned = 0.00232883 Jy
! Component: 150  -  total flux cleaned = 0.00239088 Jy
! Component: 200  -  total flux cleaned = 0.00233259 Jy
! Total flux subtracted in 200 components = 0.00233259 Jy
! Clean residual min=-0.003010 max=0.003128 Jy/beam
! Clean residual mean=-0.000001 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.445342 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.445342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079120Jy  sigma=1.165161
! Fit after  self-cal, rms=0.079110Jy  sigma=1.164985
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001258 Jy
! Component: 100  -  total flux cleaned = 0.000180773 Jy
! Component: 150  -  total flux cleaned = 0.000228543 Jy
! Component: 200  -  total flux cleaned = 0.000230352 Jy
! Total flux subtracted in 200 components = 0.000230352 Jy
! Clean residual min=-0.002911 max=0.002941 Jy/beam
! Clean residual mean=-0.000000 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.445572 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 127 components and 0.445572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079050Jy  sigma=1.164033
! Fit after  self-cal, rms=0.079044Jy  sigma=1.163953
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079044Jy  sigma=1.163953
! Fit after  self-cal, rms=0.079571Jy  sigma=1.161673
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=7.234 mas, bpa=1.906 degrees
! Estimated noise=0.604311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.42082e-06 Jy
! Component: 100  -  total flux cleaned = -8.98479e-06 Jy
! Component: 150  -  total flux cleaned = 2.48469e-05 Jy
! Component: 200  -  total flux cleaned = 2.3774e-05 Jy
! Total flux subtracted in 200 components = 2.3774e-05 Jy
! Clean residual min=-0.002635 max=0.002860 Jy/beam
! Clean residual mean=0.000001 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.445596 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 138 components and 0.445596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079529Jy  sigma=1.161069
! Fit after  self-cal, rms=0.079533Jy  sigma=1.161030
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-97.5, -47).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235027 Jy
! Component: 100  -  total flux cleaned = 0.00281533 Jy
! Component: 150  -  total flux cleaned = 0.00289268 Jy
! Component: 200  -  total flux cleaned = 0.00278387 Jy
! Total flux subtracted in 200 components = 0.00278387 Jy
! Clean residual min=-0.002462 max=0.002466 Jy/beam
! Clean residual mean=-0.000001 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.44838 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 150 components and 0.44838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079456Jy  sigma=1.159726
! Fit after  self-cal, rms=0.079452Jy  sigma=1.159650
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079452Jy  sigma=1.159650
! Fit after  self-cal, rms=0.079488Jy  sigma=1.159528
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.633 mas, bmaj=14.49 mas, bpa=5.329 degrees
! Estimated noise=0.799315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105061 Jy
! Component: 100  -  total flux cleaned = 0.00116721 Jy
! Component: 150  -  total flux cleaned = 0.00123595 Jy
! Component: 200  -  total flux cleaned = 0.0013256 Jy
! Total flux subtracted in 200 components = 0.0013256 Jy
! Clean residual min=-0.002752 max=0.002728 Jy/beam
! Clean residual mean=-0.000002 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.449706 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 173 components and 0.449706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079485Jy  sigma=1.159504
! Fit after  self-cal, rms=0.079483Jy  sigma=1.159470
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000262819 Jy
! Component: 100  -  total flux cleaned = 0.000262394 Jy
! Component: 150  -  total flux cleaned = 0.000309413 Jy
! Component: 200  -  total flux cleaned = 0.000352142 Jy
! Total flux subtracted in 200 components = 0.000352142 Jy
! Clean residual min=-0.002723 max=0.002583 Jy/beam
! Clean residual mean=-0.000001 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.450058 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 183 components and 0.450058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079484Jy  sigma=1.159536
! Fit after  self-cal, rms=0.079482Jy  sigma=1.159516
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.965 mas, bmaj=7.231 mas, bpa=1.851 degrees
! Estimated noise=0.604152 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.965 x 7.231 at 1.851 degrees (North through East)
! Clean map  min=-0.0024033  max=0.24584 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.571 mas, bmaj=6.207 mas, bpa=2.189 degrees
! Estimated noise=0.793879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.198953 Jy
! Component: 100  -  total flux cleaned = 0.276339 Jy
! Component: 150  -  total flux cleaned = 0.322724 Jy
! Component: 200  -  total flux cleaned = 0.353402 Jy
! Total flux subtracted in 200 components = 0.353402 Jy
! Clean residual min=-0.007855 max=0.016789 Jy/beam
! Clean residual mean=-0.000044 rms=0.002591 Jy/beam
! Combined flux in latest and established models = 0.353402 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.353402 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.965 mas, bmaj=7.231 mas, bpa=1.851 degrees
! Estimated noise=0.604152 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0277925 Jy
! Component: 100  -  total flux cleaned = 0.0454106 Jy
! Component: 150  -  total flux cleaned = 0.0574517 Jy
! Component: 200  -  total flux cleaned = 0.0659158 Jy
! Total flux subtracted in 200 components = 0.0659158 Jy
! Clean residual min=-0.003858 max=0.004739 Jy/beam
! Clean residual mean=-0.000016 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.419317 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 62 components and 0.419317 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00602894 Jy
! Component: 100  -  total flux cleaned = 0.0104992 Jy
! Component: 150  -  total flux cleaned = 0.0140493 Jy
! Component: 200  -  total flux cleaned = 0.0169447 Jy
! Total flux subtracted in 200 components = 0.0169447 Jy
! Clean residual min=-0.002780 max=0.002741 Jy/beam
! Clean residual mean=-0.000006 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.436262 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 85 components and 0.436262 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.633 mas, bmaj=14.49 mas, bpa=5.329 degrees
! Estimated noise=0.799315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425361 Jy
! Component: 100  -  total flux cleaned = 0.00708428 Jy
! Component: 150  -  total flux cleaned = 0.00917491 Jy
! Component: 200  -  total flux cleaned = 0.0107389 Jy
! Total flux subtracted in 200 components = 0.0107389 Jy
! Clean residual min=-0.002672 max=0.002679 Jy/beam
! Clean residual mean=-0.000005 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.447001 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011822 Jy
! Component: 100  -  total flux cleaned = 0.00160578 Jy
! Component: 150  -  total flux cleaned = 0.00190402 Jy
! Component: 200  -  total flux cleaned = 0.00213766 Jy
! Total flux subtracted in 200 components = 0.00213766 Jy
! Clean residual min=-0.002570 max=0.002572 Jy/beam
! Clean residual mean=-0.000003 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.449139 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 118 components and 0.449138 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.965 mas, bmaj=7.231 mas, bpa=1.851 degrees
! Estimated noise=0.604152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113727 Jy
! Component: 100  -  total flux cleaned = 0.000214349 Jy
! Component: 150  -  total flux cleaned = 0.000167223 Jy
! Component: 200  -  total flux cleaned = 0.000124035 Jy
! Total flux subtracted in 200 components = 0.000124035 Jy
! Clean residual min=-0.002310 max=0.002501 Jy/beam
! Clean residual mean=0.000001 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.449262 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 147 components and 0.449262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079490Jy  sigma=1.159509
! Fit after  self-cal, rms=0.079477Jy  sigma=1.159196
wmodel J0814-1806_S_map.mod
! Writing 147 model components to file: J0814-1806_S_map.mod
wobs   J0814-1806_S_uvs.fits
! Writing UV FITS file: J0814-1806_S_uvs.fits
wwins  J0814-1806_S_map.win
! wwins: Wrote 4 windows to J0814-1806_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000509724 Jy
! Component: 100  -  total flux cleaned = 0.000552078 Jy
! Component: 150  -  total flux cleaned = 0.00047428 Jy
! Component: 200  -  total flux cleaned = 0.000287772 Jy
! Component: 250  -  total flux cleaned = 0.00025143 Jy
! Component: 300  -  total flux cleaned = 0.000112365 Jy
! Component: 350  -  total flux cleaned = -2.1808e-05 Jy
! Component: 400  -  total flux cleaned = -0.000119265 Jy
! Component: 450  -  total flux cleaned = -0.000182325 Jy
! Component: 500  -  total flux cleaned = -0.000152008 Jy
! Component: 550  -  total flux cleaned = -0.000123305 Jy
! Component: 600  -  total flux cleaned = -0.000210777 Jy
! Component: 650  -  total flux cleaned = -0.000124825 Jy
! Component: 700  -  total flux cleaned = -4.16564e-05 Jy
! Component: 750  -  total flux cleaned = -4.17223e-05 Jy
! Component: 800  -  total flux cleaned = 3.88012e-05 Jy
! Component: 850  -  total flux cleaned = 0.000117061 Jy
! Component: 900  -  total flux cleaned = 0.000219941 Jy
! Component: 950  -  total flux cleaned = 0.000194537 Jy
! Component: 1000  -  total flux cleaned = 0.000294046 Jy
! Component: 1050  -  total flux cleaned = 0.000367268 Jy
! Component: 1100  -  total flux cleaned = 0.000462819 Jy
! Component: 1150  -  total flux cleaned = 0.000416032 Jy
! Component: 1200  -  total flux cleaned = 0.00053248 Jy
! Component: 1250  -  total flux cleaned = 0.000509562 Jy
! Component: 1300  -  total flux cleaned = 0.000644631 Jy
! Component: 1350  -  total flux cleaned = 0.000688563 Jy
! Component: 1400  -  total flux cleaned = 0.000710394 Jy
! Component: 1450  -  total flux cleaned = 0.00073224 Jy
! Component: 1500  -  total flux cleaned = 0.000880415 Jy
! Component: 1550  -  total flux cleaned = 0.000859401 Jy
! Component: 1600  -  total flux cleaned = 0.000921195 Jy
! Component: 1650  -  total flux cleaned = 0.000901032 Jy
! Component: 1700  -  total flux cleaned = 0.000981648 Jy
! Component: 1750  -  total flux cleaned = 0.00102151 Jy
! Component: 1800  -  total flux cleaned = 0.00106045 Jy
! Component: 1850  -  total flux cleaned = 0.00117613 Jy
! Component: 1900  -  total flux cleaned = 0.00129059 Jy
! Component: 1950  -  total flux cleaned = 0.00138433 Jy
! Component: 2000  -  total flux cleaned = 0.0014957 Jy
! Component: 2050  -  total flux cleaned = 0.00162363 Jy
! Component: 2100  -  total flux cleaned = 0.00165976 Jy
! Component: 2150  -  total flux cleaned = 0.00178468 Jy
! Component: 2200  -  total flux cleaned = 0.00178448 Jy
! Component: 2250  -  total flux cleaned = 0.00194216 Jy
! Component: 2300  -  total flux cleaned = 0.00197678 Jy
! Component: 2350  -  total flux cleaned = 0.00207964 Jy
! Component: 2400  -  total flux cleaned = 0.00213071 Jy
! Component: 2450  -  total flux cleaned = 0.00216434 Jy
! Component: 2500  -  total flux cleaned = 0.00226376 Jy
! Component: 2550  -  total flux cleaned = 0.00229639 Jy
! Component: 2600  -  total flux cleaned = 0.00232914 Jy
! Component: 2650  -  total flux cleaned = 0.00248982 Jy
! Component: 2700  -  total flux cleaned = 0.00253739 Jy
! Component: 2750  -  total flux cleaned = 0.00258466 Jy
! Component: 2800  -  total flux cleaned = 0.00266257 Jy
! Component: 2850  -  total flux cleaned = 0.00273994 Jy
! Component: 2900  -  total flux cleaned = 0.0027705 Jy
! Component: 2950  -  total flux cleaned = 0.00283138 Jy
! Component: 3000  -  total flux cleaned = 0.00295175 Jy
! Component: 3050  -  total flux cleaned = 0.00304133 Jy
! Component: 3100  -  total flux cleaned = 0.00308555 Jy
! Component: 3150  -  total flux cleaned = 0.00320247 Jy
! Component: 3200  -  total flux cleaned = 0.00323123 Jy
! Component: 3250  -  total flux cleaned = 0.00328868 Jy
! Component: 3300  -  total flux cleaned = 0.0033456 Jy
! Component: 3350  -  total flux cleaned = 0.003388 Jy
! Component: 3400  -  total flux cleaned = 0.00344401 Jy
! Component: 3450  -  total flux cleaned = 0.00356875 Jy
! Component: 3500  -  total flux cleaned = 0.00363759 Jy
! Component: 3550  -  total flux cleaned = 0.00362389 Jy
! Component: 3600  -  total flux cleaned = 0.00370519 Jy
! Component: 3650  -  total flux cleaned = 0.00377216 Jy
! Component: 3700  -  total flux cleaned = 0.00383872 Jy
! Component: 3750  -  total flux cleaned = 0.00389153 Jy
! Component: 3800  -  total flux cleaned = 0.00397009 Jy
! Component: 3850  -  total flux cleaned = 0.00398304 Jy
! Component: 3900  -  total flux cleaned = 0.00404763 Jy
! Component: 3950  -  total flux cleaned = 0.00409907 Jy
! Component: 4000  -  total flux cleaned = 0.00418808 Jy
! Component: 4050  -  total flux cleaned = 0.00417551 Jy
! Total flux subtracted in 4096 components = 0.00431335 Jy
! Clean residual min=-0.000731 max=0.000930 Jy/beam
! Clean residual mean=0.000000 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.453576 Jy
keep
! Adding 278 model components to the UV plane model.
! The established model now contains 425 components and 0.453575 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0814-1806_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.965 x 7.231 at 1.851 degrees (North through East)
! Clean map  min=-0.0016503  max=0.24636 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0814-1806_S_map.fits
wmodel /vlbi/uf001/uva//J0814-1806_S_map.mod
! Writing 425 model components to file: /vlbi/uf001/uva//J0814-1806_S_map.mod
wobs   /vlbi/uf001/uva//J0814-1806_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0814-1806_S_uvs.fits
wwins  /vlbi/uf001/uva//J0814-1806_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0814-1806_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.246362 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000219763 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.267609 0.267609 0.535219 1.07044 2.14087 4.28175 8.5635 17.127 34.254 68.508
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.246 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1121.04 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0814-1806_S_dfm.log closed on Sun Jan 13 23:51:01 2019