! Started logfile: /vlbi/uf001/uva//J0811+5714_X_dfm.log on Sun Jan 13 23:50:01 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0811+5714_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0811+5714_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975 visibilities/baseline/integration-bin. ! Found source: J0811+5714 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 37908 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0811+5714_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.069892Jy sigma=22.578378 ! Fit after self-cal, rms=0.642371Jy sigma=13.608397 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7909 mas, bmaj=0.9351 mas, bpa=5.654 degrees ! Estimated noise=0.400168 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267068 Jy ! Component: 100 - total flux cleaned = 0.333769 Jy ! Total flux subtracted in 100 components = 0.333769 Jy ! Clean residual min=-0.011613 max=0.027591 Jy/beam ! Clean residual mean=-0.000002 rms=0.002550 Jy/beam ! Combined flux in latest and established models = 0.333769 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.333769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089570Jy sigma=1.841947 ! Fit after self-cal, rms=0.089462Jy sigma=1.839946 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293836 Jy ! Component: 100 - total flux cleaned = 0.0437098 Jy ! Total flux subtracted in 100 components = 0.0437098 Jy ! Clean residual min=-0.009168 max=0.015074 Jy/beam ! Clean residual mean=-0.000003 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.377478 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.377478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075759Jy sigma=1.562940 ! Fit after self-cal, rms=0.075622Jy sigma=1.560830 ! Inverting map ! Added new window around map position (-2.4, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132613 Jy ! Component: 100 - total flux cleaned = 0.0217444 Jy ! Total flux subtracted in 100 components = 0.0217444 Jy ! Clean residual min=-0.008972 max=0.010636 Jy/beam ! Clean residual mean=-0.000003 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.399223 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.399223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072176Jy sigma=1.486538 ! Fit after self-cal, rms=0.072019Jy sigma=1.483346 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.211 mas, bpa=8.296 degrees ! Estimated noise=0.173647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122927 Jy ! Component: 100 - total flux cleaned = 0.0191772 Jy ! Component: 150 - total flux cleaned = 0.0236319 Jy ! Component: 200 - total flux cleaned = 0.0248373 Jy ! Total flux subtracted in 200 components = 0.0248373 Jy ! Clean residual min=-0.007367 max=0.011231 Jy/beam ! Clean residual mean=-0.000013 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.42406 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.42406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069776Jy sigma=1.435406 ! Fit after self-cal, rms=0.069517Jy sigma=1.429906 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.038 x 1.211 at 8.296 degrees (North through East) ! Clean map min=-0.007082 max=0.3538 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.87 KP 1.05 ! LA 0.96 MK 1.06 NL 1.15 OV 0.95 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.88 KP 1.05 ! LA 0.95 MK 1.07 NL 1.15 OV 0.94 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.89 KP 1.04 ! LA 0.96 MK 1.06 NL 1.15 OV 0.93 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.89 KP 1.04 ! LA 0.96 MK 1.07 NL 1.16 OV 0.92 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.88 KP 1.03 ! LA 0.95 MK 1.07 NL 1.15 OV 0.93 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.89 KP 1.03 ! LA 0.95 MK 1.07 NL 1.16 OV 0.93 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.88 KP 1.03 ! LA 0.95 MK 1.06 NL 1.14 OV 0.93 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.89 KP 1.04 ! LA 0.95 MK 1.05 NL 1.14 OV 0.92 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.88 KP 1.02 ! LA 0.94 MK 1.05 NL 1.15 OV 0.92 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.88 KP 1.03 ! LA 0.95 MK 1.05 NL 1.16 OV 0.93 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.88 KP 1.02 ! LA 0.94 MK 1.06 NL 1.14 OV 0.92 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.87 KP 1.04 ! LA 0.95 MK 1.03 NL 1.16 OV 0.92 ! PT 0.96 SC 0.96 ! ! ! Fit before self-cal, rms=0.069517Jy sigma=1.429906 ! Fit after self-cal, rms=0.057278Jy sigma=1.185156 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.036 mas, bmaj=1.212 mas, bpa=9.588 degrees ! Estimated noise=0.172902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000874125 Jy ! Component: 100 - total flux cleaned = -0.00209175 Jy ! Component: 150 - total flux cleaned = -0.00298461 Jy ! Component: 200 - total flux cleaned = -0.00366858 Jy ! Total flux subtracted in 200 components = -0.00366858 Jy ! Clean residual min=-0.003067 max=0.003654 Jy/beam ! Clean residual mean=-0.000016 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.420391 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.420392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056404Jy sigma=1.167043 ! Fit after self-cal, rms=0.056365Jy sigma=1.165489 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056365Jy sigma=1.165489 ! Fit after self-cal, rms=0.055058Jy sigma=1.135617 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.031 mas, bmaj=1.211 mas, bpa=9.304 degrees ! Estimated noise=0.172712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439543 Jy ! Component: 100 - total flux cleaned = -4.33496e-05 Jy ! Component: 150 - total flux cleaned = -0.000492131 Jy ! Component: 200 - total flux cleaned = -0.000769558 Jy ! Total flux subtracted in 200 components = -0.000769558 Jy ! Clean residual min=-0.002004 max=0.002214 Jy/beam ! Clean residual mean=-0.000010 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.419622 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.419622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054748Jy sigma=1.128914 ! Fit after self-cal, rms=0.054712Jy sigma=1.128253 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220092 Jy ! Component: 100 - total flux cleaned = 0.00262516 Jy ! Component: 150 - total flux cleaned = 0.00262682 Jy ! Component: 200 - total flux cleaned = 0.00267122 Jy ! Total flux subtracted in 200 components = 0.00267122 Jy ! Clean residual min=-0.001773 max=0.001938 Jy/beam ! Clean residual mean=-0.000008 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.422293 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 0.422293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054593Jy sigma=1.125516 ! Fit after self-cal, rms=0.054585Jy sigma=1.125377 ! Inverting map ! Added new window around map position (5.6, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169544 Jy ! Component: 100 - total flux cleaned = 0.00188868 Jy ! Component: 150 - total flux cleaned = 0.00197026 Jy ! Component: 200 - total flux cleaned = 0.00208729 Jy ! Total flux subtracted in 200 components = 0.00208729 Jy ! Clean residual min=-0.001660 max=0.001743 Jy/beam ! Clean residual mean=-0.000008 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.42438 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 0.42438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054500Jy sigma=1.123483 ! Fit after self-cal, rms=0.054495Jy sigma=1.123396 ! Inverting map ! Added new window around map position (14.4, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127981 Jy ! Component: 100 - total flux cleaned = 0.00155083 Jy ! Component: 150 - total flux cleaned = 0.00165669 Jy ! Component: 200 - total flux cleaned = 0.00172351 Jy ! Total flux subtracted in 200 components = 0.00172351 Jy ! Clean residual min=-0.001564 max=0.001693 Jy/beam ! Clean residual mean=-0.000006 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.426104 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 98 components and 0.426104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054437Jy sigma=1.122122 ! Fit after self-cal, rms=0.054433Jy sigma=1.122056 ! Inverting map ! Added new window around map position (-31.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176461 Jy ! Component: 100 - total flux cleaned = 0.00288389 Jy ! Component: 150 - total flux cleaned = 0.00368773 Jy ! Component: 200 - total flux cleaned = 0.00402159 Jy ! Total flux subtracted in 200 components = 0.00402159 Jy ! Clean residual min=-0.001424 max=0.001555 Jy/beam ! Clean residual mean=-0.000005 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.430126 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 119 components and 0.430125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054365Jy sigma=1.120382 ! Fit after self-cal, rms=0.054362Jy sigma=1.120324 ! Inverting map ! Added new window around map position (27.8, 20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128919 Jy ! Component: 100 - total flux cleaned = 0.00162373 Jy ! Component: 150 - total flux cleaned = 0.00184061 Jy ! Component: 200 - total flux cleaned = 0.00195918 Jy ! Total flux subtracted in 200 components = 0.00195918 Jy ! Clean residual min=-0.001331 max=0.001444 Jy/beam ! Clean residual mean=-0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.432085 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 134 components and 0.432085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054318Jy sigma=1.119315 ! Fit after self-cal, rms=0.054317Jy sigma=1.119286 ! Inverting map ! Added new window around map position (12.2, 21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068497 Jy ! Component: 100 - total flux cleaned = 0.00106427 Jy ! Component: 150 - total flux cleaned = 0.0010918 Jy ! Component: 200 - total flux cleaned = 0.0011992 Jy ! Total flux subtracted in 200 components = 0.0011992 Jy ! Clean residual min=-0.001295 max=0.001388 Jy/beam ! Clean residual mean=-0.000003 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.433284 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 147 components and 0.433284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054275Jy sigma=1.118431 ! Fit after self-cal, rms=0.054274Jy sigma=1.118408 ! Inverting map ! Added new window around map position (-10, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124771 Jy ! Component: 100 - total flux cleaned = 0.00177599 Jy ! Component: 150 - total flux cleaned = 0.00212908 Jy ! Component: 200 - total flux cleaned = 0.00246408 Jy ! Total flux subtracted in 200 components = 0.00246408 Jy ! Clean residual min=-0.001198 max=0.001198 Jy/beam ! Clean residual mean=-0.000002 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.435748 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 167 components and 0.435748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054237Jy sigma=1.117578 ! Fit after self-cal, rms=0.054236Jy sigma=1.117562 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054236Jy sigma=1.117562 ! Fit after self-cal, rms=0.054167Jy sigma=1.116266 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=1.211 mas, bpa=9.219 degrees ! Estimated noise=0.172663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206151 Jy ! Component: 100 - total flux cleaned = 7.51378e-05 Jy ! Component: 150 - total flux cleaned = 0.000290603 Jy ! Component: 200 - total flux cleaned = 0.000414287 Jy ! Total flux subtracted in 200 components = 0.000414287 Jy ! Clean residual min=-0.001023 max=0.001118 Jy/beam ! Clean residual mean=-0.000003 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.436162 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 177 components and 0.436162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054129Jy sigma=1.115439 ! Fit after self-cal, rms=0.054127Jy sigma=1.115373 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.8, 37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595451 Jy ! Component: 100 - total flux cleaned = 0.000696041 Jy ! Component: 150 - total flux cleaned = 0.000813707 Jy ! Component: 200 - total flux cleaned = 0.000923444 Jy ! Total flux subtracted in 200 components = 0.000923444 Jy ! Clean residual min=-0.000985 max=0.001003 Jy/beam ! Clean residual mean=-0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.437086 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 188 components and 0.437086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054103Jy sigma=1.114811 ! Fit after self-cal, rms=0.054101Jy sigma=1.114793 ! Inverting map ! Added new window around map position (-12.6, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035972 Jy ! Component: 100 - total flux cleaned = 0.000428774 Jy ! Component: 150 - total flux cleaned = 0.000429633 Jy ! Component: 200 - total flux cleaned = 0.00050807 Jy ! Total flux subtracted in 200 components = 0.00050807 Jy ! Clean residual min=-0.000936 max=0.000943 Jy/beam ! Clean residual mean=-0.000002 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.437594 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 199 components and 0.437594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054081Jy sigma=1.114315 ! Fit after self-cal, rms=0.054081Jy sigma=1.114309 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054081Jy sigma=1.114309 ! Fit after self-cal, rms=0.054088Jy sigma=1.114103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.278 mas, bmaj=2.393 mas, bpa=51.6 degrees ! Estimated noise=0.227821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732258 Jy ! Component: 100 - total flux cleaned = 0.00117716 Jy ! Component: 150 - total flux cleaned = 0.00139217 Jy ! Component: 200 - total flux cleaned = 0.00157034 Jy ! Total flux subtracted in 200 components = 0.00157034 Jy ! Clean residual min=-0.000963 max=0.000923 Jy/beam ! Clean residual mean=-0.000005 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.439164 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 230 components and 0.439164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054082Jy sigma=1.113944 ! Fit after self-cal, rms=0.054082Jy sigma=1.113934 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330247 Jy ! Component: 100 - total flux cleaned = 0.000477147 Jy ! Component: 150 - total flux cleaned = 0.000546471 Jy ! Component: 200 - total flux cleaned = 0.000612384 Jy ! Total flux subtracted in 200 components = 0.000612384 Jy ! Clean residual min=-0.000938 max=0.000895 Jy/beam ! Clean residual mean=-0.000004 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.439776 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 243 components and 0.439776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054078Jy sigma=1.113854 ! Fit after self-cal, rms=0.054078Jy sigma=1.113851 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.027 mas, bmaj=1.21 mas, bpa=9.187 degrees ! Estimated noise=0.172716 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.027 x 1.21 at 9.187 degrees (North through East) ! Clean map min=-0.00081928 max=0.35244 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.784 mas, bmaj=0.9365 mas, bpa=6.718 degrees ! Estimated noise=0.394877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263155 Jy ! Component: 100 - total flux cleaned = 0.332545 Jy ! Component: 150 - total flux cleaned = 0.364305 Jy ! Component: 200 - total flux cleaned = 0.381124 Jy ! Total flux subtracted in 200 components = 0.381124 Jy ! Clean residual min=-0.003625 max=0.008854 Jy/beam ! Clean residual mean=-0.000002 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.381124 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.381124 Jy ! Inverting map and beam ! Estimated beam: bmin=1.027 mas, bmaj=1.21 mas, bpa=9.187 degrees ! Estimated noise=0.172716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159525 Jy ! Component: 100 - total flux cleaned = 0.0246999 Jy ! Component: 150 - total flux cleaned = 0.0296797 Jy ! Component: 200 - total flux cleaned = 0.032787 Jy ! Total flux subtracted in 200 components = 0.032787 Jy ! Clean residual min=-0.001652 max=0.001842 Jy/beam ! Clean residual mean=-0.000010 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.413911 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.413911 Jy ! Inverting map ! Added new window around map position (-42.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246928 Jy ! Component: 100 - total flux cleaned = 0.00458681 Jy ! Component: 150 - total flux cleaned = 0.00645805 Jy ! Component: 200 - total flux cleaned = 0.00814 Jy ! Total flux subtracted in 200 components = 0.00814 Jy ! Clean residual min=-0.001436 max=0.001374 Jy/beam ! Clean residual mean=-0.000008 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.422051 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 60 components and 0.422051 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.278 mas, bmaj=2.393 mas, bpa=51.6 degrees ! Estimated noise=0.227821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253809 Jy ! Component: 100 - total flux cleaned = 0.00438922 Jy ! Component: 150 - total flux cleaned = 0.00588636 Jy ! Component: 200 - total flux cleaned = 0.00717346 Jy ! Total flux subtracted in 200 components = 0.00717346 Jy ! Clean residual min=-0.001454 max=0.001325 Jy/beam ! Clean residual mean=-0.000013 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.429224 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114054 Jy ! Component: 100 - total flux cleaned = 0.00216674 Jy ! Component: 150 - total flux cleaned = 0.00295379 Jy ! Component: 200 - total flux cleaned = 0.00371158 Jy ! Total flux subtracted in 200 components = 0.00371158 Jy ! Clean residual min=-0.001246 max=0.001108 Jy/beam ! Clean residual mean=-0.000011 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.432936 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 127 components and 0.432936 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.027 mas, bmaj=1.21 mas, bpa=9.187 degrees ! Estimated noise=0.172716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395889 Jy ! Component: 100 - total flux cleaned = 0.000823585 Jy ! Component: 150 - total flux cleaned = 0.00110045 Jy ! Component: 200 - total flux cleaned = 0.00132603 Jy ! Total flux subtracted in 200 components = 0.00132603 Jy ! Clean residual min=-0.001073 max=0.001039 Jy/beam ! Clean residual mean=-0.000003 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.434262 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 147 components and 0.434262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054154Jy sigma=1.115407 ! Fit after self-cal, rms=0.054137Jy sigma=1.115073 wmodel J0811+5714_X_map.mod ! Writing 147 model components to file: J0811+5714_X_map.mod wobs J0811+5714_X_uvs.fits ! Writing UV FITS file: J0811+5714_X_uvs.fits wwins J0811+5714_X_map.win ! wwins: Wrote 13 windows to J0811+5714_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.54431e-05 Jy ! Component: 100 - total flux cleaned = 3.7794e-05 Jy ! Component: 150 - total flux cleaned = 5.43156e-05 Jy ! Component: 200 - total flux cleaned = 0.000134957 Jy ! Component: 250 - total flux cleaned = 0.000103595 Jy ! Component: 300 - total flux cleaned = 0.000164858 Jy ! Component: 350 - total flux cleaned = 0.00013478 Jy ! Component: 400 - total flux cleaned = 0.000149643 Jy ! Component: 450 - total flux cleaned = 0.000120485 Jy ! Component: 500 - total flux cleaned = 0.000106239 Jy ! Component: 550 - total flux cleaned = 6.37983e-05 Jy ! Component: 600 - total flux cleaned = 2.22458e-05 Jy ! Component: 650 - total flux cleaned = -3.24559e-05 Jy ! Component: 700 - total flux cleaned = -8.62955e-05 Jy ! Component: 750 - total flux cleaned = -9.94104e-05 Jy ! Component: 800 - total flux cleaned = -0.000112972 Jy ! Component: 850 - total flux cleaned = -0.000112982 Jy ! Component: 900 - total flux cleaned = -0.000112823 Jy ! Component: 950 - total flux cleaned = -0.000163652 Jy ! Component: 1000 - total flux cleaned = -0.000151409 Jy ! Component: 1050 - total flux cleaned = -0.000213437 Jy ! Component: 1100 - total flux cleaned = -0.000189083 Jy ! Component: 1150 - total flux cleaned = -0.000286106 Jy ! Component: 1200 - total flux cleaned = -0.000273919 Jy ! Component: 1250 - total flux cleaned = -0.000285693 Jy ! Component: 1300 - total flux cleaned = -0.00030927 Jy ! Component: 1350 - total flux cleaned = -0.000355886 Jy ! Component: 1400 - total flux cleaned = -0.000332709 Jy ! Component: 1450 - total flux cleaned = -0.000367001 Jy ! Component: 1500 - total flux cleaned = -0.000366909 Jy ! Component: 1550 - total flux cleaned = -0.000400765 Jy ! Component: 1600 - total flux cleaned = -0.000400632 Jy ! Component: 1650 - total flux cleaned = -0.000433807 Jy ! Component: 1700 - total flux cleaned = -0.000488618 Jy ! Component: 1750 - total flux cleaned = -0.00052116 Jy ! Component: 1800 - total flux cleaned = -0.000564048 Jy ! Component: 1850 - total flux cleaned = -0.000563988 Jy ! Component: 1900 - total flux cleaned = -0.000617009 Jy ! Component: 1950 - total flux cleaned = -0.000596035 Jy ! Component: 2000 - total flux cleaned = -0.000679344 Jy ! Component: 2050 - total flux cleaned = -0.000710429 Jy ! Component: 2100 - total flux cleaned = -0.000741263 Jy ! Component: 2150 - total flux cleaned = -0.000741198 Jy ! Component: 2200 - total flux cleaned = -0.000751306 Jy ! Component: 2250 - total flux cleaned = -0.00074126 Jy ! Component: 2300 - total flux cleaned = -0.00081101 Jy ! Component: 2350 - total flux cleaned = -0.000830724 Jy ! Component: 2400 - total flux cleaned = -0.000850334 Jy ! Component: 2450 - total flux cleaned = -0.000889274 Jy ! Component: 2500 - total flux cleaned = -0.000870033 Jy ! Component: 2550 - total flux cleaned = -0.000917908 Jy ! Component: 2600 - total flux cleaned = -0.000937053 Jy ! Component: 2650 - total flux cleaned = -0.000965539 Jy ! Component: 2700 - total flux cleaned = -0.000956064 Jy ! Component: 2750 - total flux cleaned = -0.000965391 Jy ! Component: 2800 - total flux cleaned = -0.00101187 Jy ! Component: 2850 - total flux cleaned = -0.00103038 Jy ! Component: 2900 - total flux cleaned = -0.00102117 Jy ! Component: 2950 - total flux cleaned = -0.00105767 Jy ! Component: 3000 - total flux cleaned = -0.0010666 Jy ! Component: 3050 - total flux cleaned = -0.00105764 Jy ! Component: 3100 - total flux cleaned = -0.00108439 Jy ! Component: 3150 - total flux cleaned = -0.00112887 Jy ! Component: 3200 - total flux cleaned = -0.00114661 Jy ! Component: 3250 - total flux cleaned = -0.00119062 Jy ! Component: 3300 - total flux cleaned = -0.0012343 Jy ! Component: 3350 - total flux cleaned = -0.00125164 Jy ! Component: 3400 - total flux cleaned = -0.00126036 Jy ! Component: 3450 - total flux cleaned = -0.00131187 Jy ! Component: 3500 - total flux cleaned = -0.00136303 Jy ! Component: 3550 - total flux cleaned = -0.00137151 Jy ! Component: 3600 - total flux cleaned = -0.00139684 Jy ! Component: 3650 - total flux cleaned = -0.00141364 Jy ! Component: 3700 - total flux cleaned = -0.00143041 Jy ! Component: 3750 - total flux cleaned = -0.00148028 Jy ! Component: 3800 - total flux cleaned = -0.0015381 Jy ! Component: 3850 - total flux cleaned = -0.00160383 Jy ! Component: 3900 - total flux cleaned = -0.00161201 Jy ! Component: 3950 - total flux cleaned = -0.00164456 Jy ! Component: 4000 - total flux cleaned = -0.00169309 Jy ! Component: 4050 - total flux cleaned = -0.00172532 Jy ! Total flux subtracted in 4096 components = -0.00179742 Jy ! Clean residual min=-0.000564 max=0.000433 Jy/beam ! Clean residual mean=-0.000002 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.432465 Jy keep ! Adding 356 model components to the UV plane model. ! The established model now contains 503 components and 0.432465 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0811+5714_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.027 x 1.21 at 9.187 degrees (North through East) ! Clean map min=-0.00068271 max=0.35202 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0811+5714_X_map.fits wmodel /vlbi/uf001/uva//J0811+5714_X_map.mod ! Writing 503 model components to file: /vlbi/uf001/uva//J0811+5714_X_map.mod wobs /vlbi/uf001/uva//J0811+5714_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0811+5714_X_uvs.fits wwins /vlbi/uf001/uva//J0811+5714_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J0811+5714_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.352023 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135687 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.115635 0.115635 0.231269 0.462538 0.925076 1.85015 3.7003 7.40061 14.8012 29.6024 59.2049 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.352 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2594.38 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0811+5714_X_dfm.log closed on Sun Jan 13 23:50:09 2019