! Started logfile: /vlbi/uf001/uva//J0810+0810_X_dfm.log on Sun Jan 13 23:49:25 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0810+0810_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0810+0810_X_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.930524 visibilities/baseline/integration-bin.
! Found source: J0810+0810
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 43716 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0810+0810_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004527Jy  sigma=23.268318
! Fit after  self-cal, rms=0.933827Jy  sigma=21.650737
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7073 mas, bmaj=1.632 mas, bpa=-1.717 degrees
! Estimated noise=0.275602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0534249 Jy
! Component: 100  -  total flux cleaned = 0.0650998 Jy
! Total flux subtracted in 100 components = 0.0650998 Jy
! Clean residual min=-0.002723 max=0.003654 Jy/beam
! Clean residual mean=-0.000001 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0650998 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0650998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058586Jy  sigma=1.275297
! Fit after  self-cal, rms=0.057951Jy  sigma=1.260792
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312554 Jy
! Component: 100  -  total flux cleaned = 0.00341228 Jy
! Total flux subtracted in 100 components = 0.00341228 Jy
! Clean residual min=-0.002529 max=0.003319 Jy/beam
! Clean residual mean=-0.000000 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.0685121 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.0685121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057784Jy  sigma=1.257366
! Fit after  self-cal, rms=0.057783Jy  sigma=1.257278
! Inverting map 
! Added new window around map position (1.4, 3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290374 Jy
! Component: 100  -  total flux cleaned = 0.00296828 Jy
! Total flux subtracted in 100 components = 0.00296828 Jy
! Clean residual min=-0.002454 max=0.002744 Jy/beam
! Clean residual mean=0.000000 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0714804 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.0714804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057668Jy  sigma=1.254450
! Fit after  self-cal, rms=0.057647Jy  sigma=1.254095
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8949 mas, bmaj=1.942 mas, bpa=-1.98 degrees
! Estimated noise=0.150369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147147 Jy
! Component: 100  -  total flux cleaned = 0.00159135 Jy
! Component: 150  -  total flux cleaned = 0.00184501 Jy
! Component: 200  -  total flux cleaned = 0.00202085 Jy
! Total flux subtracted in 200 components = 0.00202085 Jy
! Clean residual min=-0.001788 max=0.001612 Jy/beam
! Clean residual mean=0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0735013 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 41 components and 0.0735012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057517Jy  sigma=1.250834
! Fit after  self-cal, rms=0.057499Jy  sigma=1.250634
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8949 x 1.942 at -1.98 degrees (North through East)
! Clean map  min=-0.0016824  max=0.068055 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.92     KP        1.06     
!   LA        0.97     MK        1.05     NL        1.10     OV        0.93     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.93     KP        1.04     
!   LA        1.04     MK        1.05     NL        1.09     OV        0.96     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        0.92     KP        1.05     
!   LA        1.03     MK        1.02     NL        1.12     OV        0.95     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.90     KP        1.02     
!   LA        1.01     MK        1.03     NL        1.13     OV        0.94     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        0.86     KP        1.13     
!   LA        0.97     MK        1.01     NL        1.15     OV        0.94     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.08     HN        0.94     KP        1.05     
!   LA        0.99     MK        1.02     NL        1.11     OV        0.95     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.87     KP        1.04     
!   LA        0.99     MK        1.06     NL        1.08     OV        0.92     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.92     KP        1.05     
!   LA        1.01     MK        1.03     NL        1.10     OV        0.93     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.07     HN        0.88     KP        1.04     
!   LA        0.97     MK        1.01     NL        1.11     OV        0.92     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.90     KP        1.11     
!   LA        0.98     MK        0.99     NL        1.10     OV        0.90     
!   PT        0.97     SC        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.89     KP        1.01     
!   LA        1.01     MK        1.02     NL        1.10     OV        0.91     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     HN        0.85     KP        1.01     
!   LA        0.97     MK        1.01     NL        1.12     OV        0.91     
!   PT        0.94     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.057499Jy  sigma=1.250634
! Fit after  self-cal, rms=0.056095Jy  sigma=1.242777
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8891 mas, bmaj=1.942 mas, bpa=-1.608 degrees
! Estimated noise=0.150292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102273 Jy
! Component: 100  -  total flux cleaned = -0.00117986 Jy
! Component: 150  -  total flux cleaned = -0.00125743 Jy
! Component: 200  -  total flux cleaned = -0.00132104 Jy
! Total flux subtracted in 200 components = -0.00132104 Jy
! Clean residual min=-0.000950 max=0.000991 Jy/beam
! Clean residual mean=0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.0721802 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 64 components and 0.0721802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056070Jy  sigma=1.242171
! Fit after  self-cal, rms=0.056084Jy  sigma=1.241891
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056084Jy  sigma=1.241891
! Fit after  self-cal, rms=0.056299Jy  sigma=1.238460
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.887 mas, bmaj=1.943 mas, bpa=-1.502 degrees
! Estimated noise=0.150172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000596243 Jy
! Component: 100  -  total flux cleaned = -0.000792866 Jy
! Component: 150  -  total flux cleaned = -0.000896718 Jy
! Component: 200  -  total flux cleaned = -0.000935313 Jy
! Total flux subtracted in 200 components = -0.000935313 Jy
! Clean residual min=-0.000787 max=0.000816 Jy/beam
! Clean residual mean=0.000001 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0712449 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.0712449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056291Jy  sigma=1.238273
! Fit after  self-cal, rms=0.056308Jy  sigma=1.238165
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-26.8, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000623513 Jy
! Component: 100  -  total flux cleaned = 0.000723372 Jy
! Component: 150  -  total flux cleaned = 0.00069815 Jy
! Component: 200  -  total flux cleaned = 0.000708048 Jy
! Total flux subtracted in 200 components = 0.000708048 Jy
! Clean residual min=-0.000773 max=0.000711 Jy/beam
! Clean residual mean=0.000001 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.0719529 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.0719529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056296Jy  sigma=1.237930
! Fit after  self-cal, rms=0.056296Jy  sigma=1.237900
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056296Jy  sigma=1.237900
! Fit after  self-cal, rms=0.056289Jy  sigma=1.237832
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8869 mas, bmaj=1.944 mas, bpa=-1.428 degrees
! Estimated noise=0.150172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.64591e-05 Jy
! Component: 100  -  total flux cleaned = -5.46231e-05 Jy
! Component: 150  -  total flux cleaned = -6.51902e-05 Jy
! Component: 200  -  total flux cleaned = -5.59181e-05 Jy
! Total flux subtracted in 200 components = -5.59181e-05 Jy
! Clean residual min=-0.000754 max=0.000714 Jy/beam
! Clean residual mean=0.000001 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.071897 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 100 components and 0.071897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056284Jy  sigma=1.237734
! Fit after  self-cal, rms=0.056286Jy  sigma=1.237719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.30393e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100959 Jy
! Component: 150  -  total flux cleaned = 0.000109271 Jy
! Component: 200  -  total flux cleaned = 0.000117218 Jy
! Total flux subtracted in 200 components = 0.000117218 Jy
! Clean residual min=-0.000746 max=0.000706 Jy/beam
! Clean residual mean=0.000001 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0720142 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 107 components and 0.0720142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056283Jy  sigma=1.237669
! Fit after  self-cal, rms=0.056283Jy  sigma=1.237665
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056283Jy  sigma=1.237665
! Fit after  self-cal, rms=0.056251Jy  sigma=1.237643
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.079 mas, bmaj=3.026 mas, bpa=-0.6038 degrees
! Estimated noise=0.191227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.54237e-05 Jy
! Component: 100  -  total flux cleaned = 1.43464e-05 Jy
! Component: 150  -  total flux cleaned = 1.40455e-05 Jy
! Component: 200  -  total flux cleaned = 2.99169e-05 Jy
! Total flux subtracted in 200 components = 2.99169e-05 Jy
! Clean residual min=-0.000795 max=0.000936 Jy/beam
! Clean residual mean=0.000002 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.0720441 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.0720441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056251Jy  sigma=1.237635
! Fit after  self-cal, rms=0.056251Jy  sigma=1.237629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.95618e-05 Jy
! Component: 100  -  total flux cleaned = 0.000107014 Jy
! Component: 150  -  total flux cleaned = 0.000119563 Jy
! Component: 200  -  total flux cleaned = 0.000143227 Jy
! Total flux subtracted in 200 components = 0.000143227 Jy
! Clean residual min=-0.000781 max=0.000926 Jy/beam
! Clean residual mean=0.000002 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0721873 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 127 components and 0.0721873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056251Jy  sigma=1.237619
! Fit after  self-cal, rms=0.056251Jy  sigma=1.237620
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8869 mas, bmaj=1.945 mas, bpa=-1.386 degrees
! Estimated noise=0.150127 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8869 x 1.945 at -1.386 degrees (North through East)
! Clean map  min=-0.00067121  max=0.068057 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7032 mas, bmaj=1.635 mas, bpa=-1.088 degrees
! Estimated noise=0.273252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0533478 Jy
! Component: 100  -  total flux cleaned = 0.0650423 Jy
! Component: 150  -  total flux cleaned = 0.0682697 Jy
! Component: 200  -  total flux cleaned = 0.0692039 Jy
! Total flux subtracted in 200 components = 0.0692039 Jy
! Clean residual min=-0.001506 max=0.001389 Jy/beam
! Clean residual mean=0.000000 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.0692039 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0692039 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8869 mas, bmaj=1.945 mas, bpa=-1.386 degrees
! Estimated noise=0.150127 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101985 Jy
! Component: 100  -  total flux cleaned = 0.00150323 Jy
! Component: 150  -  total flux cleaned = 0.00190663 Jy
! Component: 200  -  total flux cleaned = 0.00226946 Jy
! Total flux subtracted in 200 components = 0.00226946 Jy
! Clean residual min=-0.000743 max=0.000744 Jy/beam
! Clean residual mean=0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.0714733 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.0714733 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.079 mas, bmaj=3.026 mas, bpa=-0.6038 degrees
! Estimated noise=0.191227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000561563 Jy
! Component: 100  -  total flux cleaned = 0.000684169 Jy
! Component: 150  -  total flux cleaned = 0.000786036 Jy
! Component: 200  -  total flux cleaned = 0.00088331 Jy
! Total flux subtracted in 200 components = 0.00088331 Jy
! Clean residual min=-0.000805 max=0.000912 Jy/beam
! Clean residual mean=0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0723566 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.85749e-05 Jy
! Component: 100  -  total flux cleaned = 5.61318e-05 Jy
! Component: 150  -  total flux cleaned = 7.24746e-05 Jy
! Component: 200  -  total flux cleaned = 8.74181e-05 Jy
! Total flux subtracted in 200 components = 8.74181e-05 Jy
! Clean residual min=-0.000794 max=0.000891 Jy/beam
! Clean residual mean=0.000002 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0724441 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 64 components and 0.0724441 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8869 mas, bmaj=1.945 mas, bpa=-1.386 degrees
! Estimated noise=0.150127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.27302e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010072 Jy
! Component: 150  -  total flux cleaned = 7.06907e-05 Jy
! Component: 200  -  total flux cleaned = 2.96075e-05 Jy
! Total flux subtracted in 200 components = 2.96075e-05 Jy
! Clean residual min=-0.000727 max=0.000731 Jy/beam
! Clean residual mean=0.000001 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0724737 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 0.0724737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056263Jy  sigma=1.237883
! Fit after  self-cal, rms=0.056261Jy  sigma=1.237853
wmodel J0810+0810_X_map.mod
! Writing 74 model components to file: J0810+0810_X_map.mod
wobs   J0810+0810_X_uvs.fits
! Writing UV FITS file: J0810+0810_X_uvs.fits
wwins  J0810+0810_X_map.win
! wwins: Wrote 4 windows to J0810+0810_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.54024e-05 Jy
! Component: 100  -  total flux cleaned = 2.64635e-06 Jy
! Component: 150  -  total flux cleaned = 1.51846e-05 Jy
! Component: 200  -  total flux cleaned = 1.54956e-05 Jy
! Component: 250  -  total flux cleaned = 3.87035e-06 Jy
! Component: 300  -  total flux cleaned = 1.54421e-05 Jy
! Component: 350  -  total flux cleaned = 4.90763e-05 Jy
! Component: 400  -  total flux cleaned = 2.65621e-05 Jy
! Component: 450  -  total flux cleaned = 5.9431e-05 Jy
! Component: 500  -  total flux cleaned = 9.14109e-05 Jy
! Component: 550  -  total flux cleaned = 5.98289e-05 Jy
! Component: 600  -  total flux cleaned = 9.13861e-05 Jy
! Component: 650  -  total flux cleaned = 0.000132494 Jy
! Component: 700  -  total flux cleaned = 0.000142691 Jy
! Component: 750  -  total flux cleaned = 0.000163028 Jy
! Component: 800  -  total flux cleaned = 0.000202711 Jy
! Component: 850  -  total flux cleaned = 0.000202803 Jy
! Component: 900  -  total flux cleaned = 0.000251118 Jy
! Component: 950  -  total flux cleaned = 0.000241498 Jy
! Component: 1000  -  total flux cleaned = 0.000250686 Jy
! Component: 1050  -  total flux cleaned = 0.000222833 Jy
! Component: 1100  -  total flux cleaned = 0.000222909 Jy
! Component: 1150  -  total flux cleaned = 0.00022312 Jy
! Component: 1200  -  total flux cleaned = 0.000223015 Jy
! Component: 1250  -  total flux cleaned = 0.000214106 Jy
! Component: 1300  -  total flux cleaned = 0.00017858 Jy
! Component: 1350  -  total flux cleaned = 0.000143422 Jy
! Component: 1400  -  total flux cleaned = 0.000117241 Jy
! Component: 1450  -  total flux cleaned = 9.13844e-05 Jy
! Component: 1500  -  total flux cleaned = 8.28587e-05 Jy
! Component: 1550  -  total flux cleaned = 4.89169e-05 Jy
! Component: 1600  -  total flux cleaned = 4.04897e-05 Jy
! Component: 1650  -  total flux cleaned = 2.37826e-05 Jy
! Component: 1700  -  total flux cleaned = -9.31513e-06 Jy
! Component: 1750  -  total flux cleaned = -5.03316e-05 Jy
! Component: 1800  -  total flux cleaned = -7.47109e-05 Jy
! Component: 1850  -  total flux cleaned = -9.0716e-05 Jy
! Component: 1900  -  total flux cleaned = -9.87642e-05 Jy
! Component: 1950  -  total flux cleaned = -0.000122509 Jy
! Component: 2000  -  total flux cleaned = -0.000161712 Jy
! Component: 2050  -  total flux cleaned = -0.000161731 Jy
! Component: 2100  -  total flux cleaned = -0.000177154 Jy
! Component: 2150  -  total flux cleaned = -0.000177176 Jy
! Component: 2200  -  total flux cleaned = -0.000230526 Jy
! Component: 2250  -  total flux cleaned = -0.000230492 Jy
! Component: 2300  -  total flux cleaned = -0.000238012 Jy
! Component: 2350  -  total flux cleaned = -0.000290196 Jy
! Component: 2400  -  total flux cleaned = -0.00031976 Jy
! Component: 2450  -  total flux cleaned = -0.000349094 Jy
! Component: 2500  -  total flux cleaned = -0.000385587 Jy
! Component: 2550  -  total flux cleaned = -0.000385603 Jy
! Component: 2600  -  total flux cleaned = -0.000400068 Jy
! Component: 2650  -  total flux cleaned = -0.000443044 Jy
! Component: 2700  -  total flux cleaned = -0.000464363 Jy
! Component: 2750  -  total flux cleaned = -0.000464402 Jy
! Component: 2800  -  total flux cleaned = -0.000492466 Jy
! Component: 2850  -  total flux cleaned = -0.000506421 Jy
! Component: 2900  -  total flux cleaned = -0.000568788 Jy
! Component: 2950  -  total flux cleaned = -0.000582528 Jy
! Component: 3000  -  total flux cleaned = -0.000589361 Jy
! Component: 3050  -  total flux cleaned = -0.000609799 Jy
! Component: 3100  -  total flux cleaned = -0.000596296 Jy
! Component: 3150  -  total flux cleaned = -0.000616497 Jy
! Component: 3200  -  total flux cleaned = -0.000643265 Jy
! Component: 3250  -  total flux cleaned = -0.000649952 Jy
! Component: 3300  -  total flux cleaned = -0.000663181 Jy
! Component: 3350  -  total flux cleaned = -0.000676307 Jy
! Component: 3400  -  total flux cleaned = -0.00068942 Jy
! Component: 3450  -  total flux cleaned = -0.000715442 Jy
! Component: 3500  -  total flux cleaned = -0.000683109 Jy
! Component: 3550  -  total flux cleaned = -0.000715273 Jy
! Component: 3600  -  total flux cleaned = -0.000721655 Jy
! Component: 3650  -  total flux cleaned = -0.000708965 Jy
! Component: 3700  -  total flux cleaned = -0.000715235 Jy
! Component: 3750  -  total flux cleaned = -0.000715254 Jy
! Component: 3800  -  total flux cleaned = -0.000715278 Jy
! Component: 3850  -  total flux cleaned = -0.00072775 Jy
! Component: 3900  -  total flux cleaned = -0.000758814 Jy
! Component: 3950  -  total flux cleaned = -0.000758768 Jy
! Component: 4000  -  total flux cleaned = -0.000764957 Jy
! Component: 4050  -  total flux cleaned = -0.000807766 Jy
! Total flux subtracted in 4096 components = -0.000813886 Jy
! Clean residual min=-0.000389 max=0.000342 Jy/beam
! Clean residual mean=0.000000 rms=0.000107 Jy/beam
! Combined flux in latest and established models = 0.0716598 Jy
keep
! Adding 325 model components to the UV plane model.
! The established model now contains 399 components and 0.0716598 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0810+0810_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8869 x 1.945 at -1.386 degrees (North through East)
! Clean map  min=-0.00054495  max=0.067907 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0810+0810_X_map.fits
wmodel /vlbi/uf001/uva//J0810+0810_X_map.mod
! Writing 399 model components to file: /vlbi/uf001/uva//J0810+0810_X_map.mod
wobs   /vlbi/uf001/uva//J0810+0810_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0810+0810_X_uvs.fits
wwins  /vlbi/uf001/uva//J0810+0810_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0810+0810_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0679073 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000105991 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.468248 0.468248 0.936496 1.87299 3.74598 7.49196 14.9839 29.9679 59.9357
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.067 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  640.686 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0810+0810_X_dfm.log closed on Sun Jan 13 23:49:31 2019