! Started logfile: /vlbi/uf001/uvm//J0809+3122_S_a_dfm.log on Sun Jan 13 21:07:32 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0809+3122_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0809+3122_S_a_uvm.fits
! AN table 1: 73 integrations on 36 of 36 possible baselines.
! AN table 2: 37 integrations on 28 of 28 possible baselines.
! AN table 3: 37 integrations on 10 of 10 possible baselines.
! AN table 4: 37 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.937241 visibilities/baseline/integration-bin.
! Found source: J0809+3122
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 12903 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0809+3122_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 6 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 6 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
!  A total of 6 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.003203Jy  sigma=22.631789
! Fit after  self-cal, rms=0.970131Jy  sigma=21.902447
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.952 mas, bmaj=6.538 mas, bpa=4.08 degrees
! Estimated noise=0.469638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251685 Jy
! Component: 100  -  total flux cleaned = 0.0306901 Jy
! Total flux subtracted in 100 components = 0.0306901 Jy
! Clean residual min=-0.002907 max=0.002614 Jy/beam
! Clean residual mean=-0.000002 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.0306901 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0306901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070152Jy  sigma=1.198923
! Fit after  self-cal, rms=0.068711Jy  sigma=1.156147
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347731 Jy
! Component: 100  -  total flux cleaned = 0.00390667 Jy
! Total flux subtracted in 100 components = 0.00390667 Jy
! Clean residual min=-0.002276 max=0.002272 Jy/beam
! Clean residual mean=-0.000004 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.0345968 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.0345968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068527Jy  sigma=1.151219
! Fit after  self-cal, rms=0.068514Jy  sigma=1.150999
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.736 mas, bmaj=7.506 mas, bpa=2.135 degrees
! Estimated noise=0.283064 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125749 Jy
! Component: 100  -  total flux cleaned = 0.00156062 Jy
! Component: 150  -  total flux cleaned = 0.00169543 Jy
! Component: 200  -  total flux cleaned = 0.00181697 Jy
! Total flux subtracted in 200 components = 0.00181697 Jy
! Clean residual min=-0.001681 max=0.001733 Jy/beam
! Clean residual mean=-0.000009 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0364138 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.0364138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068488Jy  sigma=1.150344
! Fit after  self-cal, rms=0.068472Jy  sigma=1.149902
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.736 x 7.506 at 2.135 degrees (North through East)
! Clean map  min=-0.0016414  max=0.035443 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.02     KP        1.04     LA        0.88     
!   MK        0.93     NL        1.14     OV        1.02     PT        1.06     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        1.01     KP        0.92     LA        0.93     
!   MK        0.84     NL        1.21     OV        1.02     SC        1.10     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.96     KP        0.76     LA        1.00     MK        1.08     
!   PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.04     FD        0.96     HN        1.03     KP        0.95     
!   LA        0.86     PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.02     KP        0.97     LA        0.92     
!   MK        0.94     NL        1.14     OV        1.09     PT        1.01     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.20     FD        0.81     KP        1.00     LA        1.01     
!   MK        0.86     NL        1.24     OV        1.03     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.88     KP        0.98     LA        0.90     MK        0.91     
!   PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.85     FD        0.80     HN        1.05     KP        1.10     
!   LA        0.98     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.96     KP        1.17     LA        0.97     
!   MK        0.87     NL        1.01     OV        1.12     PT        1.01     
!   SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.20     FD        0.82     KP        1.00     LA        1.09     
!   MK        0.92     NL        0.98     OV        1.07     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.91     KP        0.94     LA        0.94     MK        1.09     
!   PT        1.20     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.05     FD        0.82     HN        1.08     KP        1.03     
!   LA        0.98     PT        1.08     
! 
! 
! Fit before self-cal, rms=0.068472Jy  sigma=1.149902
! Fit after  self-cal, rms=0.066272Jy  sigma=1.145465
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.697 mas, bmaj=7.542 mas, bpa=2.125 degrees
! Estimated noise=0.282371 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120916 Jy
! Component: 100  -  total flux cleaned = 0.000119755 Jy
! Component: 150  -  total flux cleaned = 0.000118259 Jy
! Component: 200  -  total flux cleaned = 0.000107662 Jy
! Total flux subtracted in 200 components = 0.000107662 Jy
! Clean residual min=-0.001489 max=0.001482 Jy/beam
! Clean residual mean=-0.000005 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.0365214 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 41 components and 0.0365214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066264Jy  sigma=1.145308
! Fit after  self-cal, rms=0.066331Jy  sigma=1.143528
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066331Jy  sigma=1.143528
! Fit after  self-cal, rms=0.066034Jy  sigma=1.141372
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.723 mas, bmaj=7.544 mas, bpa=1.84 degrees
! Estimated noise=0.282387 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.56932e-05 Jy
! Component: 100  -  total flux cleaned = -3.35288e-05 Jy
! Component: 150  -  total flux cleaned = -4.11443e-05 Jy
! Component: 200  -  total flux cleaned = -4.80771e-05 Jy
! Total flux subtracted in 200 components = -4.80771e-05 Jy
! Clean residual min=-0.001277 max=0.001253 Jy/beam
! Clean residual mean=-0.000004 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0364733 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 48 components and 0.0364734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066032Jy  sigma=1.141330
! Fit after  self-cal, rms=0.066101Jy  sigma=1.140807
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113485 Jy
! Component: 100  -  total flux cleaned = -0.000121089 Jy
! Component: 150  -  total flux cleaned = -0.000127847 Jy
! Component: 200  -  total flux cleaned = -0.000127842 Jy
! Total flux subtracted in 200 components = -0.000127842 Jy
! Clean residual min=-0.001261 max=0.001177 Jy/beam
! Clean residual mean=-0.000005 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0363455 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 51 components and 0.0363455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066099Jy  sigma=1.140767
! Fit after  self-cal, rms=0.066102Jy  sigma=1.140759
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066102Jy  sigma=1.140759
! Fit after  self-cal, rms=0.066229Jy  sigma=1.140670
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.721 mas, bmaj=7.569 mas, bpa=1.678 degrees
! Estimated noise=0.282082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.03443e-05 Jy
! Component: 100  -  total flux cleaned = -6.79902e-05 Jy
! Component: 150  -  total flux cleaned = -7.4808e-05 Jy
! Component: 200  -  total flux cleaned = -8.09813e-05 Jy
! Total flux subtracted in 200 components = -8.09813e-05 Jy
! Clean residual min=-0.001238 max=0.001176 Jy/beam
! Clean residual mean=-0.000004 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.0362645 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.0362645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066228Jy  sigma=1.140638
! Fit after  self-cal, rms=0.066248Jy  sigma=1.140529
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.9018e-05 Jy
! Component: 100  -  total flux cleaned = -2.52231e-05 Jy
! Component: 150  -  total flux cleaned = -3.10347e-05 Jy
! Component: 200  -  total flux cleaned = -3.11644e-05 Jy
! Total flux subtracted in 200 components = -3.11644e-05 Jy
! Clean residual min=-0.001218 max=0.001169 Jy/beam
! Clean residual mean=-0.000004 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0362334 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 56 components and 0.0362334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066247Jy  sigma=1.140500
! Fit after  self-cal, rms=0.066249Jy  sigma=1.140493
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066249Jy  sigma=1.140493
! Fit after  self-cal, rms=0.066225Jy  sigma=1.140476
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.291 mas, bmaj=10.73 mas, bpa=-12.64 degrees
! Estimated noise=0.342063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.53595e-05 Jy
! Component: 100  -  total flux cleaned = -4.61854e-05 Jy
! Component: 150  -  total flux cleaned = -5.17725e-05 Jy
! Component: 200  -  total flux cleaned = -4.94714e-05 Jy
! Total flux subtracted in 200 components = -4.94714e-05 Jy
! Clean residual min=-0.001405 max=0.001228 Jy/beam
! Clean residual mean=-0.000007 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0361839 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.0361839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066224Jy  sigma=1.140481
! Fit after  self-cal, rms=0.066234Jy  sigma=1.140474
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.33583e-05 Jy
! Component: 100  -  total flux cleaned = 2.83496e-05 Jy
! Component: 150  -  total flux cleaned = 3.03271e-05 Jy
! Component: 200  -  total flux cleaned = 3.24184e-05 Jy
! Total flux subtracted in 200 components = 3.24184e-05 Jy
! Clean residual min=-0.001409 max=0.001232 Jy/beam
! Clean residual mean=-0.000007 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0362163 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.0362163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066234Jy  sigma=1.140483
! Fit after  self-cal, rms=0.066234Jy  sigma=1.140481
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.724 mas, bmaj=7.588 mas, bpa=1.568 degrees
! Estimated noise=0.281779 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.724 x 7.588 at 1.568 degrees (North through East)
! Clean map  min=-0.0012386  max=0.035096 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.934 mas, bmaj=6.576 mas, bpa=3.644 degrees
! Estimated noise=0.470729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0271466 Jy
! Component: 100  -  total flux cleaned = 0.0332028 Jy
! Component: 150  -  total flux cleaned = 0.0339709 Jy
! Component: 200  -  total flux cleaned = 0.0345872 Jy
! Total flux subtracted in 200 components = 0.0345872 Jy
! Clean residual min=-0.001730 max=0.001960 Jy/beam
! Clean residual mean=-0.000003 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.0345872 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0345872 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.724 mas, bmaj=7.588 mas, bpa=1.568 degrees
! Estimated noise=0.281779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108448 Jy
! Component: 100  -  total flux cleaned = 0.00126224 Jy
! Component: 150  -  total flux cleaned = 0.00131833 Jy
! Component: 200  -  total flux cleaned = 0.00134856 Jy
! Total flux subtracted in 200 components = 0.00134856 Jy
! Clean residual min=-0.001229 max=0.001188 Jy/beam
! Clean residual mean=-0.000004 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0359358 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.0359358 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.291 mas, bmaj=10.73 mas, bpa=-12.64 degrees
! Estimated noise=0.342063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226816 Jy
! Component: 100  -  total flux cleaned = 0.000248842 Jy
! Component: 150  -  total flux cleaned = 0.000266597 Jy
! Component: 200  -  total flux cleaned = 0.000280897 Jy
! Total flux subtracted in 200 components = 0.000280897 Jy
! Clean residual min=-0.001429 max=0.001232 Jy/beam
! Clean residual mean=-0.000007 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0362167 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.09075e-06 Jy
! Component: 100  -  total flux cleaned = 4.04612e-06 Jy
! Component: 150  -  total flux cleaned = 4.06355e-06 Jy
! Component: 200  -  total flux cleaned = 7.21398e-06 Jy
! Total flux subtracted in 200 components = 7.21398e-06 Jy
! Clean residual min=-0.001423 max=0.001230 Jy/beam
! Clean residual mean=-0.000007 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0362239 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.0362239 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.724 mas, bmaj=7.588 mas, bpa=1.568 degrees
! Estimated noise=0.281779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.91815e-06 Jy
! Component: 100  -  total flux cleaned = -3.02288e-05 Jy
! Component: 150  -  total flux cleaned = -5.84774e-05 Jy
! Component: 200  -  total flux cleaned = -5.90442e-05 Jy
! Total flux subtracted in 200 components = -5.90442e-05 Jy
! Clean residual min=-0.001206 max=0.001169 Jy/beam
! Clean residual mean=-0.000004 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0361648 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 39 components and 0.0361648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066236Jy  sigma=1.140545
! Fit after  self-cal, rms=0.066234Jy  sigma=1.140519
wmodel J0809+3122_S_a_map.mod
! Writing 39 model components to file: J0809+3122_S_a_map.mod
wobs   J0809+3122_S_a_uvs.fits
! Writing UV FITS file: J0809+3122_S_a_uvs.fits
wwins  J0809+3122_S_a_map.win
! wwins: Wrote 1 windows to J0809+3122_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177476 Jy
! Component: 100  -  total flux cleaned = 0.000216906 Jy
! Component: 150  -  total flux cleaned = 0.000217266 Jy
! Component: 200  -  total flux cleaned = 0.00020026 Jy
! Component: 250  -  total flux cleaned = 0.000166677 Jy
! Component: 300  -  total flux cleaned = 0.000133287 Jy
! Component: 350  -  total flux cleaned = 6.84816e-05 Jy
! Component: 400  -  total flux cleaned = 5.25528e-05 Jy
! Component: 450  -  total flux cleaned = 3.69191e-05 Jy
! Component: 500  -  total flux cleaned = 2.18196e-05 Jy
! Component: 550  -  total flux cleaned = 2.19221e-05 Jy
! Component: 600  -  total flux cleaned = 3.62436e-05 Jy
! Component: 650  -  total flux cleaned = 6.42893e-05 Jy
! Component: 700  -  total flux cleaned = 7.81086e-05 Jy
! Component: 750  -  total flux cleaned = 6.46507e-05 Jy
! Component: 800  -  total flux cleaned = 9.16261e-05 Jy
! Component: 850  -  total flux cleaned = 0.000157566 Jy
! Component: 900  -  total flux cleaned = 0.000222253 Jy
! Component: 950  -  total flux cleaned = 0.000273466 Jy
! Component: 1000  -  total flux cleaned = 0.000323853 Jy
! Component: 1050  -  total flux cleaned = 0.00038619 Jy
! Component: 1100  -  total flux cleaned = 0.000447316 Jy
! Component: 1150  -  total flux cleaned = 0.000495853 Jy
! Component: 1200  -  total flux cleaned = 0.000567594 Jy
! Component: 1250  -  total flux cleaned = 0.000603162 Jy
! Component: 1300  -  total flux cleaned = 0.000638385 Jy
! Component: 1350  -  total flux cleaned = 0.000707476 Jy
! Component: 1400  -  total flux cleaned = 0.000764207 Jy
! Component: 1450  -  total flux cleaned = 0.000809297 Jy
! Component: 1500  -  total flux cleaned = 0.000854052 Jy
! Component: 1550  -  total flux cleaned = 0.0009531 Jy
! Component: 1600  -  total flux cleaned = 0.00102924 Jy
! Component: 1650  -  total flux cleaned = 0.00107216 Jy
! Component: 1700  -  total flux cleaned = 0.00113599 Jy
! Component: 1750  -  total flux cleaned = 0.00116747 Jy
! Component: 1800  -  total flux cleaned = 0.00124034 Jy
! Component: 1850  -  total flux cleaned = 0.00128149 Jy
! Component: 1900  -  total flux cleaned = 0.00134255 Jy
! Component: 1950  -  total flux cleaned = 0.00138272 Jy
! Component: 2000  -  total flux cleaned = 0.00140264 Jy
! Component: 2050  -  total flux cleaned = 0.00145217 Jy
! Component: 2100  -  total flux cleaned = 0.00150127 Jy
! Component: 2150  -  total flux cleaned = 0.00155935 Jy
! Component: 2200  -  total flux cleaned = 0.00161689 Jy
! Component: 2250  -  total flux cleaned = 0.00162644 Jy
! Component: 2300  -  total flux cleaned = 0.0016737 Jy
! Component: 2350  -  total flux cleaned = 0.00172976 Jy
! Component: 2400  -  total flux cleaned = 0.00174831 Jy
! Component: 2450  -  total flux cleaned = 0.00180355 Jy
! Component: 2500  -  total flux cleaned = 0.00182174 Jy
! Component: 2550  -  total flux cleaned = 0.00184883 Jy
! Component: 2600  -  total flux cleaned = 0.00186667 Jy
! Component: 2650  -  total flux cleaned = 0.00191996 Jy
! Component: 2700  -  total flux cleaned = 0.00190242 Jy
! Component: 2750  -  total flux cleaned = 0.00195483 Jy
! Component: 2800  -  total flux cleaned = 0.00192877 Jy
! Component: 2850  -  total flux cleaned = 0.00198036 Jy
! Component: 2900  -  total flux cleaned = 0.00197179 Jy
! Component: 2950  -  total flux cleaned = 0.00200566 Jy
! Component: 3000  -  total flux cleaned = 0.00201405 Jy
! Component: 3050  -  total flux cleaned = 0.00198896 Jy
! Component: 3100  -  total flux cleaned = 0.00198902 Jy
! Component: 3150  -  total flux cleaned = 0.00204663 Jy
! Component: 3200  -  total flux cleaned = 0.0020139 Jy
! Component: 3250  -  total flux cleaned = 0.00203011 Jy
! Component: 3300  -  total flux cleaned = 0.00204635 Jy
! Component: 3350  -  total flux cleaned = 0.00207037 Jy
! Component: 3400  -  total flux cleaned = 0.0020783 Jy
! Component: 3450  -  total flux cleaned = 0.00208621 Jy
! Component: 3500  -  total flux cleaned = 0.0020784 Jy
! Component: 3550  -  total flux cleaned = 0.00209405 Jy
! Component: 3600  -  total flux cleaned = 0.00214058 Jy
! Component: 3650  -  total flux cleaned = 0.00212516 Jy
! Component: 3700  -  total flux cleaned = 0.00213281 Jy
! Component: 3750  -  total flux cleaned = 0.00211761 Jy
! Component: 3800  -  total flux cleaned = 0.00212511 Jy
! Component: 3850  -  total flux cleaned = 0.00214017 Jy
! Component: 3900  -  total flux cleaned = 0.00215511 Jy
! Component: 3950  -  total flux cleaned = 0.00217001 Jy
! Component: 4000  -  total flux cleaned = 0.00216259 Jy
! Component: 4050  -  total flux cleaned = 0.00216986 Jy
! Total flux subtracted in 4096 components = 0.00215526 Jy
! Clean residual min=-0.000494 max=0.000449 Jy/beam
! Clean residual mean=-0.000002 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0383201 Jy
keep
! Adding 331 model components to the UV plane model.
! The established model now contains 370 components and 0.0383201 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0809+3122_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.724 x 7.588 at 1.568 degrees (North through East)
! Clean map  min=-0.0010999  max=0.035041 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0809+3122_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0809+3122_S_a_map.mod
! Writing 370 model components to file: /vlbi/uf001/uvm//J0809+3122_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0809+3122_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0809+3122_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0809+3122_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J0809+3122_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0350405 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000135353 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.15883 1.15883 2.31766 4.63532 9.27065 18.5413 37.0826 74.1652
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.035 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  258.881 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0809+3122_S_a_dfm.log closed on Sun Jan 13 21:07:36 2019