! Started logfile: /vlbi/uf001/uva//J0805+2106_X_dfm.log on Sun Jan 13 23:45:58 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0805+2106_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0805+2106_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.912037 visibilities/baseline/integration-bin. ! Found source: J0805+2106 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35460 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0805+2106_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.031379Jy sigma=22.998883 ! Fit after self-cal, rms=0.789873Jy sigma=17.725206 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7616 mas, bmaj=1.472 mas, bpa=0.7341 degrees ! Estimated noise=0.365344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156155 Jy ! Component: 100 - total flux cleaned = 0.195166 Jy ! Total flux subtracted in 100 components = 0.195166 Jy ! Clean residual min=-0.017858 max=0.054193 Jy/beam ! Clean residual mean=-0.000033 rms=0.003478 Jy/beam ! Combined flux in latest and established models = 0.195166 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.195166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110341Jy sigma=2.412123 ! Fit after self-cal, rms=0.110323Jy sigma=2.411629 ! Inverting map ! Added new window around map position (1.4, -3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471252 Jy ! Component: 100 - total flux cleaned = 0.0710469 Jy ! Total flux subtracted in 100 components = 0.0710469 Jy ! Clean residual min=-0.012259 max=0.013415 Jy/beam ! Clean residual mean=-0.000023 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.266212 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.266212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079719Jy sigma=1.721883 ! Fit after self-cal, rms=0.077578Jy sigma=1.671903 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194272 Jy ! Component: 100 - total flux cleaned = 0.033791 Jy ! Total flux subtracted in 100 components = 0.033791 Jy ! Clean residual min=-0.008411 max=0.008418 Jy/beam ! Clean residual mean=-0.000018 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.300003 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.300003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068158Jy sigma=1.467198 ! Fit after self-cal, rms=0.067935Jy sigma=1.462107 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117654 Jy ! Component: 100 - total flux cleaned = 0.020843 Jy ! Total flux subtracted in 100 components = 0.020843 Jy ! Clean residual min=-0.006627 max=0.007859 Jy/beam ! Clean residual mean=-0.000014 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.320846 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.320846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063621Jy sigma=1.370636 ! Fit after self-cal, rms=0.063545Jy sigma=1.369003 ! Inverting map ! Added new window around map position (-0.2, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00840976 Jy ! Component: 100 - total flux cleaned = 0.0149413 Jy ! Total flux subtracted in 100 components = 0.0149413 Jy ! Clean residual min=-0.005563 max=0.007153 Jy/beam ! Clean residual mean=-0.000012 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.335788 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.335788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061077Jy sigma=1.317656 ! Fit after self-cal, rms=0.061034Jy sigma=1.316615 ! Inverting map ! Added new window around map position (2.2, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692129 Jy ! Component: 100 - total flux cleaned = 0.0122681 Jy ! Total flux subtracted in 100 components = 0.0122681 Jy ! Clean residual min=-0.005489 max=0.004999 Jy/beam ! Clean residual mean=-0.000010 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.348056 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.348056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059325Jy sigma=1.279839 ! Fit after self-cal, rms=0.059292Jy sigma=1.279085 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9634 mas, bmaj=1.782 mas, bpa=2.597 degrees ! Estimated noise=0.170024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0099791 Jy ! Component: 100 - total flux cleaned = 0.0174699 Jy ! Component: 150 - total flux cleaned = 0.0234628 Jy ! Component: 200 - total flux cleaned = 0.0284058 Jy ! Total flux subtracted in 200 components = 0.0284058 Jy ! Clean residual min=-0.004422 max=0.007018 Jy/beam ! Clean residual mean=-0.000022 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.376462 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 99 components and 0.376462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056696Jy sigma=1.225065 ! Fit after self-cal, rms=0.056573Jy sigma=1.222080 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9634 x 1.782 at 2.597 degrees (North through East) ! Clean map min=-0.0043381 max=0.21061 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.93 KP 1.01 ! LA 0.97 MK 1.01 NL 1.08 OV 0.94 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.95 KP 0.99 ! LA 0.96 MK 1.03 NL 1.06 OV 0.94 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 0.97 KP 1.00 ! LA 0.97 MK 1.01 NL 1.08 OV 0.95 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.94 KP 1.02 ! LA 0.96 MK 1.03 NL 1.07 OV 0.94 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.96 KP 1.01 ! LA 0.95 MK 1.01 NL 1.11 OV 0.94 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.94 KP 1.00 ! LA 0.97 MK 1.05 NL 1.09 OV 0.95 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.97 KP 1.02 ! LA 0.96 MK 1.03 NL 1.09 OV 0.95 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.97 KP 1.00 ! LA 0.96 MK 1.04 NL 1.10 OV 0.95 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.97 KP 1.00 ! LA 0.99 MK 1.05 NL 1.09 OV 0.94 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.96 KP 1.04 ! LA 0.96 MK 1.06 NL 1.10 OV 0.95 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.97 KP 1.02 ! LA 0.97 MK 1.04 NL 1.10 OV 0.96 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.99 KP 0.99 ! LA 0.96 MK 1.04 NL 1.09 OV 0.96 ! PT 0.93 SC 1.01 ! ! ! Fit before self-cal, rms=0.056573Jy sigma=1.222080 ! Fit after self-cal, rms=0.053190Jy sigma=1.162106 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9716 mas, bmaj=1.804 mas, bpa=2.683 degrees ! Estimated noise=0.16815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257362 Jy ! Component: 100 - total flux cleaned = 0.00377553 Jy ! Component: 150 - total flux cleaned = 0.00420738 Jy ! Component: 200 - total flux cleaned = 0.0044127 Jy ! Total flux subtracted in 200 components = 0.0044127 Jy ! Clean residual min=-0.001964 max=0.001888 Jy/beam ! Clean residual mean=-0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.380874 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 125 components and 0.380874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052729Jy sigma=1.150212 ! Fit after self-cal, rms=0.052711Jy sigma=1.149339 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052711Jy sigma=1.149339 ! Fit after self-cal, rms=0.052388Jy sigma=1.144789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9718 mas, bmaj=1.801 mas, bpa=2.771 degrees ! Estimated noise=0.167796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223257 Jy ! Component: 100 - total flux cleaned = 0.000622014 Jy ! Component: 150 - total flux cleaned = 0.000828898 Jy ! Component: 200 - total flux cleaned = 0.000874987 Jy ! Total flux subtracted in 200 components = 0.000874987 Jy ! Clean residual min=-0.001375 max=0.001416 Jy/beam ! Clean residual mean=-0.000002 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.381749 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 143 components and 0.381749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052257Jy sigma=1.141236 ! Fit after self-cal, rms=0.052252Jy sigma=1.141065 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.8, 26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123286 Jy ! Component: 100 - total flux cleaned = 0.00155293 Jy ! Component: 150 - total flux cleaned = 0.0017572 Jy ! Component: 200 - total flux cleaned = 0.00190658 Jy ! Total flux subtracted in 200 components = 0.00190658 Jy ! Clean residual min=-0.001209 max=0.001291 Jy/beam ! Clean residual mean=-0.000002 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.383656 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 159 components and 0.383656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052202Jy sigma=1.139742 ! Fit after self-cal, rms=0.052199Jy sigma=1.139690 ! Inverting map ! Added new window around map position (5.8, -31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553135 Jy ! Component: 100 - total flux cleaned = 0.000765807 Jy ! Component: 150 - total flux cleaned = 0.000791842 Jy ! Component: 200 - total flux cleaned = 0.000768002 Jy ! Total flux subtracted in 200 components = 0.000768002 Jy ! Clean residual min=-0.001137 max=0.001188 Jy/beam ! Clean residual mean=-0.000002 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.384424 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 175 components and 0.384424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052164Jy sigma=1.138849 ! Fit after self-cal, rms=0.052164Jy sigma=1.138829 ! Inverting map ! Added new window around map position (10.8, 19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000769539 Jy ! Component: 100 - total flux cleaned = 0.000869195 Jy ! Component: 150 - total flux cleaned = 0.000960349 Jy ! Component: 200 - total flux cleaned = 0.000981843 Jy ! Total flux subtracted in 200 components = 0.000981843 Jy ! Clean residual min=-0.001044 max=0.001121 Jy/beam ! Clean residual mean=-0.000002 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.385406 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 195 components and 0.385406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052137Jy sigma=1.138216 ! Fit after self-cal, rms=0.052136Jy sigma=1.138206 ! Inverting map ! Added new window around map position (22.6, -22.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.85756e-05 Jy ! Component: 100 - total flux cleaned = 1.13489e-05 Jy ! Component: 150 - total flux cleaned = 3.38882e-05 Jy ! Component: 200 - total flux cleaned = 7.71395e-05 Jy ! Total flux subtracted in 200 components = 7.71395e-05 Jy ! Clean residual min=-0.000980 max=0.001021 Jy/beam ! Clean residual mean=-0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.385483 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 211 components and 0.385483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052106Jy sigma=1.137456 ! Fit after self-cal, rms=0.052105Jy sigma=1.137432 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052105Jy sigma=1.137432 ! Fit after self-cal, rms=0.052049Jy sigma=1.136580 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9716 mas, bmaj=1.802 mas, bpa=2.774 degrees ! Estimated noise=0.167744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224984 Jy ! Component: 100 - total flux cleaned = -0.000324618 Jy ! Component: 150 - total flux cleaned = -0.000473823 Jy ! Component: 200 - total flux cleaned = -0.000591682 Jy ! Total flux subtracted in 200 components = -0.000591682 Jy ! Clean residual min=-0.000968 max=0.000875 Jy/beam ! Clean residual mean=-0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.384891 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 218 components and 0.384891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052028Jy sigma=1.136057 ! Fit after self-cal, rms=0.052029Jy sigma=1.136045 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.29058e-05 Jy ! Component: 100 - total flux cleaned = -8.66155e-05 Jy ! Component: 150 - total flux cleaned = -0.000154593 Jy ! Component: 200 - total flux cleaned = -0.000171058 Jy ! Total flux subtracted in 200 components = -0.000171058 Jy ! Clean residual min=-0.000935 max=0.000878 Jy/beam ! Clean residual mean=-0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.38472 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 233 components and 0.38472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052019Jy sigma=1.135825 ! Fit after self-cal, rms=0.052019Jy sigma=1.135824 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052019Jy sigma=1.135824 ! Fit after self-cal, rms=0.051996Jy sigma=1.135733 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.146 mas, bmaj=2.812 mas, bpa=-2.039 degrees ! Estimated noise=0.209355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.69887e-05 Jy ! Component: 100 - total flux cleaned = 8.51944e-05 Jy ! Component: 150 - total flux cleaned = 2.51273e-05 Jy ! Component: 200 - total flux cleaned = -2.80065e-05 Jy ! Total flux subtracted in 200 components = -2.80065e-05 Jy ! Clean residual min=-0.000890 max=0.000980 Jy/beam ! Clean residual mean=-0.000002 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.384692 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 249 components and 0.384692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051991Jy sigma=1.135557 ! Fit after self-cal, rms=0.051990Jy sigma=1.135544 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.60606e-05 Jy ! Component: 100 - total flux cleaned = -3.97947e-05 Jy ! Component: 150 - total flux cleaned = -0.000149331 Jy ! Component: 200 - total flux cleaned = -0.00021013 Jy ! Total flux subtracted in 200 components = -0.00021013 Jy ! Clean residual min=-0.000874 max=0.000966 Jy/beam ! Clean residual mean=-0.000002 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.384482 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 258 components and 0.384482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051988Jy sigma=1.135485 ! Fit after self-cal, rms=0.051988Jy sigma=1.135484 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9713 mas, bmaj=1.803 mas, bpa=2.761 degrees ! Estimated noise=0.167721 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9713 x 1.803 at 2.761 degrees (North through East) ! Clean map min=-0.0010554 max=0.20868 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.766 mas, bmaj=1.482 mas, bpa=0.9998 degrees ! Estimated noise=0.363454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156322 Jy ! Component: 100 - total flux cleaned = 0.212598 Jy ! Component: 150 - total flux cleaned = 0.246624 Jy ! Component: 200 - total flux cleaned = 0.271253 Jy ! Total flux subtracted in 200 components = 0.271253 Jy ! Clean residual min=-0.006398 max=0.014268 Jy/beam ! Clean residual mean=-0.000019 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.271253 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.271253 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9713 mas, bmaj=1.803 mas, bpa=2.761 degrees ! Estimated noise=0.167721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282854 Jy ! Component: 100 - total flux cleaned = 0.0473153 Jy ! Component: 150 - total flux cleaned = 0.0609071 Jy ! Component: 200 - total flux cleaned = 0.0708863 Jy ! Total flux subtracted in 200 components = 0.0708863 Jy ! Clean residual min=-0.002855 max=0.005893 Jy/beam ! Clean residual mean=-0.000022 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.34214 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 65 components and 0.34214 Jy ! Inverting map ! Added new window around map position (0.6, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764543 Jy ! Component: 100 - total flux cleaned = 0.0136087 Jy ! Component: 150 - total flux cleaned = 0.0183182 Jy ! Component: 200 - total flux cleaned = 0.0220793 Jy ! Total flux subtracted in 200 components = 0.0220793 Jy ! Clean residual min=-0.001609 max=0.002259 Jy/beam ! Clean residual mean=-0.000010 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.364219 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 101 components and 0.364219 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304112 Jy ! Component: 100 - total flux cleaned = 0.00551798 Jy ! Component: 150 - total flux cleaned = 0.00733123 Jy ! Component: 200 - total flux cleaned = 0.00880465 Jy ! Total flux subtracted in 200 components = 0.00880465 Jy ! Clean residual min=-0.001257 max=0.001569 Jy/beam ! Clean residual mean=-0.000006 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.373023 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 138 components and 0.373023 Jy ! Inverting map ! Added new window around map position (-5.2, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159811 Jy ! Component: 100 - total flux cleaned = 0.0028073 Jy ! Component: 150 - total flux cleaned = 0.00383974 Jy ! Component: 200 - total flux cleaned = 0.00463886 Jy ! Total flux subtracted in 200 components = 0.00463886 Jy ! Clean residual min=-0.001077 max=0.001114 Jy/beam ! Clean residual mean=-0.000004 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.377662 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 158 components and 0.377662 Jy ! Inverting map ! Added new window around map position (-9.4, 23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971058 Jy ! Component: 100 - total flux cleaned = 0.00169249 Jy ! Component: 150 - total flux cleaned = 0.00232377 Jy ! Component: 200 - total flux cleaned = 0.00290898 Jy ! Total flux subtracted in 200 components = 0.00290898 Jy ! Clean residual min=-0.000999 max=0.001004 Jy/beam ! Clean residual mean=-0.000004 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.380571 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 178 components and 0.380571 Jy ! Inverting map ! Added new window around map position (26.4, -50.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895207 Jy ! Component: 100 - total flux cleaned = 0.00129911 Jy ! Component: 150 - total flux cleaned = 0.00143568 Jy ! Component: 200 - total flux cleaned = 0.00166977 Jy ! Total flux subtracted in 200 components = 0.00166977 Jy ! Clean residual min=-0.000920 max=0.000904 Jy/beam ! Clean residual mean=-0.000003 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.382241 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 196 components and 0.382241 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.146 mas, bmaj=2.812 mas, bpa=-2.039 degrees ! Estimated noise=0.209355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704367 Jy ! Component: 100 - total flux cleaned = 0.00102362 Jy ! Component: 150 - total flux cleaned = 0.00129552 Jy ! Component: 200 - total flux cleaned = 0.00153763 Jy ! Total flux subtracted in 200 components = 0.00153763 Jy ! Clean residual min=-0.000906 max=0.000898 Jy/beam ! Clean residual mean=-0.000005 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.383779 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.98843e-05 Jy ! Component: 100 - total flux cleaned = 0.000191741 Jy ! Component: 150 - total flux cleaned = 0.000260773 Jy ! Component: 200 - total flux cleaned = 0.000324848 Jy ! Total flux subtracted in 200 components = 0.000324848 Jy ! Clean residual min=-0.000856 max=0.000881 Jy/beam ! Clean residual mean=-0.000004 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.384104 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 262 components and 0.384104 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9713 mas, bmaj=1.803 mas, bpa=2.761 degrees ! Estimated noise=0.167721 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.22104e-05 Jy ! Component: 100 - total flux cleaned = -0.000117507 Jy ! Component: 150 - total flux cleaned = -0.000177805 Jy ! Component: 200 - total flux cleaned = -0.000234904 Jy ! Total flux subtracted in 200 components = -0.000234904 Jy ! Clean residual min=-0.000788 max=0.000823 Jy/beam ! Clean residual mean=-0.000002 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.383869 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 280 components and 0.383869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051958Jy sigma=1.134861 ! Fit after self-cal, rms=0.051952Jy sigma=1.134776 wmodel J0805+2106_X_map.mod ! Writing 280 model components to file: J0805+2106_X_map.mod wobs J0805+2106_X_uvs.fits ! Writing UV FITS file: J0805+2106_X_uvs.fits wwins J0805+2106_X_map.win ! wwins: Wrote 13 windows to J0805+2106_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.3276e-05 Jy ! Component: 100 - total flux cleaned = 5.45037e-05 Jy ! Component: 150 - total flux cleaned = 0.00013426 Jy ! Component: 200 - total flux cleaned = 0.000160134 Jy ! Component: 250 - total flux cleaned = 0.000160028 Jy ! Component: 300 - total flux cleaned = 0.000160037 Jy ! Component: 350 - total flux cleaned = 0.000183998 Jy ! Component: 400 - total flux cleaned = 0.000124895 Jy ! Component: 450 - total flux cleaned = 0.000101937 Jy ! Component: 500 - total flux cleaned = 9.07398e-05 Jy ! Component: 550 - total flux cleaned = 4.62327e-05 Jy ! Component: 600 - total flux cleaned = 4.64441e-05 Jy ! Component: 650 - total flux cleaned = 5.73564e-05 Jy ! Component: 700 - total flux cleaned = 2.5052e-05 Jy ! Component: 750 - total flux cleaned = 4.60353e-05 Jy ! Component: 800 - total flux cleaned = 4.25029e-06 Jy ! Component: 850 - total flux cleaned = -6.04337e-06 Jy ! Component: 900 - total flux cleaned = -3.66791e-05 Jy ! Component: 950 - total flux cleaned = -5.68548e-05 Jy ! Component: 1000 - total flux cleaned = -3.6935e-05 Jy ! Component: 1050 - total flux cleaned = -6.65708e-05 Jy ! Component: 1100 - total flux cleaned = -6.66204e-05 Jy ! Component: 1150 - total flux cleaned = -5.68205e-05 Jy ! Component: 1200 - total flux cleaned = -6.63481e-05 Jy ! Component: 1250 - total flux cleaned = -5.68412e-05 Jy ! Component: 1300 - total flux cleaned = -5.67849e-05 Jy ! Component: 1350 - total flux cleaned = -4.75073e-05 Jy ! Component: 1400 - total flux cleaned = -5.67343e-05 Jy ! Component: 1450 - total flux cleaned = -6.58668e-05 Jy ! Component: 1500 - total flux cleaned = -4.7766e-05 Jy ! Component: 1550 - total flux cleaned = -6.57208e-05 Jy ! Component: 1600 - total flux cleaned = -7.45619e-05 Jy ! Component: 1650 - total flux cleaned = -9.21705e-05 Jy ! Component: 1700 - total flux cleaned = -9.21088e-05 Jy ! Component: 1750 - total flux cleaned = -9.20691e-05 Jy ! Component: 1800 - total flux cleaned = -0.000109394 Jy ! Component: 1850 - total flux cleaned = -0.000143635 Jy ! Component: 1900 - total flux cleaned = -0.00016904 Jy ! Component: 1950 - total flux cleaned = -0.000160776 Jy ! Component: 2000 - total flux cleaned = -0.000185787 Jy ! Component: 2050 - total flux cleaned = -0.000227212 Jy ! Component: 2100 - total flux cleaned = -0.000218996 Jy ! Component: 2150 - total flux cleaned = -0.000235176 Jy ! Component: 2200 - total flux cleaned = -0.000235235 Jy ! Component: 2250 - total flux cleaned = -0.000275426 Jy ! Component: 2300 - total flux cleaned = -0.000267505 Jy ! Component: 2350 - total flux cleaned = -0.0002992 Jy ! Component: 2400 - total flux cleaned = -0.000315038 Jy ! Component: 2450 - total flux cleaned = -0.000315136 Jy ! Component: 2500 - total flux cleaned = -0.000330632 Jy ! Component: 2550 - total flux cleaned = -0.000353825 Jy ! Component: 2600 - total flux cleaned = -0.000361542 Jy ! Component: 2650 - total flux cleaned = -0.000376814 Jy ! Component: 2700 - total flux cleaned = -0.000414683 Jy ! Component: 2750 - total flux cleaned = -0.000422199 Jy ! Component: 2800 - total flux cleaned = -0.000452073 Jy ! Component: 2850 - total flux cleaned = -0.000437209 Jy ! Component: 2900 - total flux cleaned = -0.000452084 Jy ! Component: 2950 - total flux cleaned = -0.000503577 Jy ! Component: 3000 - total flux cleaned = -0.00052551 Jy ! Component: 3050 - total flux cleaned = -0.000532754 Jy ! Component: 3100 - total flux cleaned = -0.000547217 Jy ! Component: 3150 - total flux cleaned = -0.000568716 Jy ! Component: 3200 - total flux cleaned = -0.000575847 Jy ! Component: 3250 - total flux cleaned = -0.000568729 Jy ! Component: 3300 - total flux cleaned = -0.000589979 Jy ! Component: 3350 - total flux cleaned = -0.000583012 Jy ! Component: 3400 - total flux cleaned = -0.000631855 Jy ! Component: 3450 - total flux cleaned = -0.000645752 Jy ! Component: 3500 - total flux cleaned = -0.000604243 Jy ! Component: 3550 - total flux cleaned = -0.000672984 Jy ! Component: 3600 - total flux cleaned = -0.000673017 Jy ! Component: 3650 - total flux cleaned = -0.000672975 Jy ! Component: 3700 - total flux cleaned = -0.000659465 Jy ! Component: 3750 - total flux cleaned = -0.000646038 Jy ! Component: 3800 - total flux cleaned = -0.000672861 Jy ! Component: 3850 - total flux cleaned = -0.000666187 Jy ! Component: 3900 - total flux cleaned = -0.000686029 Jy ! Component: 3950 - total flux cleaned = -0.000692701 Jy ! Component: 4000 - total flux cleaned = -0.000699353 Jy ! Component: 4050 - total flux cleaned = -0.000725481 Jy ! Total flux subtracted in 4096 components = -0.000725502 Jy ! Clean residual min=-0.000366 max=0.000430 Jy/beam ! Clean residual mean=-0.000000 rms=0.000113 Jy/beam ! Combined flux in latest and established models = 0.383143 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 601 components and 0.383143 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0805+2106_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9713 x 1.803 at 2.761 degrees (North through East) ! Clean map min=-0.00078992 max=0.20922 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0805+2106_X_map.fits wmodel /vlbi/uf001/uva//J0805+2106_X_map.mod ! Writing 601 model components to file: /vlbi/uf001/uva//J0805+2106_X_map.mod wobs /vlbi/uf001/uva//J0805+2106_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0805+2106_X_uvs.fits wwins /vlbi/uf001/uva//J0805+2106_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J0805+2106_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.209223 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000111934 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.160499 0.160499 0.320998 0.641995 1.28399 2.56798 5.13596 10.2719 20.5438 41.0877 82.1754 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.209 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1869.17 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0805+2106_X_dfm.log closed on Sun Jan 13 23:46:06 2019