! Started logfile: /vlbi/uf001/uva//J0801-2831_S_dfm.log on Sun Jan 13 23:43:54 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0801-2831_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0801-2831_S_uva.fits
! AN table 1: 89 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.539326 visibilities/baseline/integration-bin.
! Found source: J0801-2831
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0801-2831_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 280 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 280 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 280 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015149Jy  sigma=15.386405
! Fit after  self-cal, rms=0.890787Jy  sigma=13.416547
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.706 mas, bmaj=8.27 mas, bpa=-0.1871 degrees
! Estimated noise=0.861784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.077777 Jy
! Component: 100  -  total flux cleaned = 0.114211 Jy
! Total flux subtracted in 100 components = 0.114211 Jy
! Clean residual min=-0.006842 max=0.018438 Jy/beam
! Clean residual mean=-0.000012 rms=0.002559 Jy/beam
! Combined flux in latest and established models = 0.114211 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.114211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095130Jy  sigma=1.407198
! Fit after  self-cal, rms=0.094377Jy  sigma=1.396315
! Inverting map 
! Added new window around map position (-2.5, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228121 Jy
! Component: 100  -  total flux cleaned = 0.0373661 Jy
! Total flux subtracted in 100 components = 0.0373661 Jy
! Clean residual min=-0.005259 max=0.009205 Jy/beam
! Clean residual mean=-0.000005 rms=0.001550 Jy/beam
! Combined flux in latest and established models = 0.151577 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 57 components and 0.151577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086213Jy  sigma=1.247776
! Fit after  self-cal, rms=0.086083Jy  sigma=1.246056
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104199 Jy
! Component: 100  -  total flux cleaned = 0.0173819 Jy
! Total flux subtracted in 100 components = 0.0173819 Jy
! Clean residual min=-0.004883 max=0.005795 Jy/beam
! Clean residual mean=-0.000001 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.168959 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 76 components and 0.168959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084193Jy  sigma=1.209626
! Fit after  self-cal, rms=0.084147Jy  sigma=1.208960
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.345 mas, bmaj=10.18 mas, bpa=-0.5503 degrees
! Estimated noise=0.591355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0085068 Jy
! Component: 100  -  total flux cleaned = 0.0133427 Jy
! Component: 150  -  total flux cleaned = 0.016261 Jy
! Component: 200  -  total flux cleaned = 0.0180306 Jy
! Total flux subtracted in 200 components = 0.0180306 Jy
! Clean residual min=-0.003634 max=0.005515 Jy/beam
! Clean residual mean=-0.000003 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.186989 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 97 components and 0.186989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083417Jy  sigma=1.192803
! Fit after  self-cal, rms=0.083376Jy  sigma=1.192056
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.345 x 10.18 at -0.5503 degrees (North through East)
! Clean map  min=-0.003464  max=0.10441 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        1.08     KP        0.95     
!   LA        0.93     MK        0.94     NL        1.14     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        1.04     KP        0.99     
!   LA        0.94     MK        1.11     NL        1.09     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.12     KP        0.97     
!   LA        0.97     MK        1.06     NL        1.05     OV        0.98     
!   PT        0.98     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.083376Jy  sigma=1.192056
! Fit after  self-cal, rms=0.086641Jy  sigma=1.183145
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.364 mas, bmaj=10.22 mas, bpa=-0.08031 degrees
! Estimated noise=0.597221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000861837 Jy
! Component: 100  -  total flux cleaned = -0.000982821 Jy
! Component: 150  -  total flux cleaned = -0.0010512 Jy
! Component: 200  -  total flux cleaned = -0.00108978 Jy
! Total flux subtracted in 200 components = -0.00108978 Jy
! Clean residual min=-0.003541 max=0.002791 Jy/beam
! Clean residual mean=-0.000009 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.185899 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 0.185899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086618Jy  sigma=1.182889
! Fit after  self-cal, rms=0.086759Jy  sigma=1.182653
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086759Jy  sigma=1.182653
! Fit after  self-cal, rms=0.087442Jy  sigma=1.180992
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.369 mas, bmaj=10.23 mas, bpa=-0.09746 degrees
! Estimated noise=0.597826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00057093 Jy
! Component: 100  -  total flux cleaned = -0.00063621 Jy
! Component: 150  -  total flux cleaned = -0.000689039 Jy
! Component: 200  -  total flux cleaned = -0.00070436 Jy
! Total flux subtracted in 200 components = -0.00070436 Jy
! Clean residual min=-0.003454 max=0.002563 Jy/beam
! Clean residual mean=-0.000012 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.185195 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 117 components and 0.185195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087429Jy  sigma=1.180869
! Fit after  self-cal, rms=0.087456Jy  sigma=1.180832
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.58283e-05 Jy
! Component: 100  -  total flux cleaned = -0.000108151 Jy
! Component: 150  -  total flux cleaned = -0.000122848 Jy
! Component: 200  -  total flux cleaned = -0.000136323 Jy
! Total flux subtracted in 200 components = -0.000136323 Jy
! Clean residual min=-0.003441 max=0.002563 Jy/beam
! Clean residual mean=-0.000012 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.185059 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 123 components and 0.185059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087450Jy  sigma=1.180780
! Fit after  self-cal, rms=0.087453Jy  sigma=1.180769
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087453Jy  sigma=1.180769
! Fit after  self-cal, rms=0.088162Jy  sigma=1.180413
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.368 mas, bmaj=10.21 mas, bpa=-0.06483 degrees
! Estimated noise=0.597676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000313439 Jy
! Component: 100  -  total flux cleaned = -0.000345371 Jy
! Component: 150  -  total flux cleaned = -0.000373021 Jy
! Component: 200  -  total flux cleaned = -0.000385618 Jy
! Total flux subtracted in 200 components = -0.000385618 Jy
! Clean residual min=-0.003393 max=0.002619 Jy/beam
! Clean residual mean=-0.000014 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.184673 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 126 components and 0.184673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088155Jy  sigma=1.180353
! Fit after  self-cal, rms=0.088175Jy  sigma=1.180331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.74952e-05 Jy
! Component: 100  -  total flux cleaned = -7.73884e-05 Jy
! Component: 150  -  total flux cleaned = -8.92581e-05 Jy
! Component: 200  -  total flux cleaned = -0.000100517 Jy
! Total flux subtracted in 200 components = -0.000100517 Jy
! Clean residual min=-0.003375 max=0.002625 Jy/beam
! Clean residual mean=-0.000014 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.184573 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 127 components and 0.184573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088170Jy  sigma=1.180300
! Fit after  self-cal, rms=0.088172Jy  sigma=1.180291
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088172Jy  sigma=1.180291
! Fit after  self-cal, rms=0.088374Jy  sigma=1.180279
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.633 mas, bmaj=21.1 mas, bpa=0.202 degrees
! Estimated noise=0.725968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000619562 Jy
! Component: 100  -  total flux cleaned = 0.000662687 Jy
! Component: 150  -  total flux cleaned = 0.000719518 Jy
! Component: 200  -  total flux cleaned = 0.000753991 Jy
! Total flux subtracted in 200 components = 0.000753991 Jy
! Clean residual min=-0.003105 max=0.003400 Jy/beam
! Clean residual mean=-0.000025 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.185327 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 129 components and 0.185327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088378Jy  sigma=1.180385
! Fit after  self-cal, rms=0.088385Jy  sigma=1.180355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13, 13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00256137 Jy
! Component: 100  -  total flux cleaned = 0.00262508 Jy
! Component: 150  -  total flux cleaned = 0.00272134 Jy
! Component: 200  -  total flux cleaned = 0.00267712 Jy
! Total flux subtracted in 200 components = 0.00267712 Jy
! Clean residual min=-0.002633 max=0.002397 Jy/beam
! Clean residual mean=-0.000018 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.188004 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 172 components and 0.188004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088312Jy  sigma=1.179305
! Fit after  self-cal, rms=0.088317Jy  sigma=1.179138
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=10.2 mas, bpa=-0.05401 degrees
! Estimated noise=0.597572 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.366 x 10.2 at -0.05401 degrees (North through East)
! Clean map  min=-0.0030844  max=0.10579 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.715 mas, bmaj=8.272 mas, bpa=0.4706 degrees
! Estimated noise=0.868993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.078982 Jy
! Component: 100  -  total flux cleaned = 0.116886 Jy
! Component: 150  -  total flux cleaned = 0.139309 Jy
! Component: 200  -  total flux cleaned = 0.153651 Jy
! Total flux subtracted in 200 components = 0.153651 Jy
! Clean residual min=-0.004698 max=0.007891 Jy/beam
! Clean residual mean=-0.000011 rms=0.001400 Jy/beam
! Combined flux in latest and established models = 0.153651 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.153651 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=10.2 mas, bpa=-0.05401 degrees
! Estimated noise=0.597572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135857 Jy
! Component: 100  -  total flux cleaned = 0.0209026 Jy
! Component: 150  -  total flux cleaned = 0.0252447 Jy
! Component: 200  -  total flux cleaned = 0.0272492 Jy
! Total flux subtracted in 200 components = 0.0272492 Jy
! Clean residual min=-0.003576 max=0.003254 Jy/beam
! Clean residual mean=-0.000017 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.1809 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 120 components and 0.1809 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.633 mas, bmaj=21.1 mas, bpa=0.202 degrees
! Estimated noise=0.725968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00370303 Jy
! Component: 100  -  total flux cleaned = 0.00556874 Jy
! Component: 150  -  total flux cleaned = 0.00582149 Jy
! Component: 200  -  total flux cleaned = 0.00601945 Jy
! Total flux subtracted in 200 components = 0.00601945 Jy
! Clean residual min=-0.002814 max=0.002471 Jy/beam
! Clean residual mean=-0.000020 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.186919 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125974 Jy
! Component: 100  -  total flux cleaned = 0.00023861 Jy
! Component: 150  -  total flux cleaned = 0.000305846 Jy
! Component: 200  -  total flux cleaned = 0.00036862 Jy
! Total flux subtracted in 200 components = 0.00036862 Jy
! Clean residual min=-0.002655 max=0.002310 Jy/beam
! Clean residual mean=-0.000019 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.187288 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 200 components and 0.187288 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.366 mas, bmaj=10.2 mas, bpa=-0.05401 degrees
! Estimated noise=0.597572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00122258 Jy
! Component: 100  -  total flux cleaned = -0.00117221 Jy
! Component: 150  -  total flux cleaned = -0.0011743 Jy
! Component: 200  -  total flux cleaned = -0.00108155 Jy
! Total flux subtracted in 200 components = -0.00108155 Jy
! Clean residual min=-0.003190 max=0.002324 Jy/beam
! Clean residual mean=-0.000012 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.186206 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 233 components and 0.186206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088261Jy  sigma=1.178415
! Fit after  self-cal, rms=0.088258Jy  sigma=1.178083
wmodel J0801-2831_S_map.mod
! Writing 233 model components to file: J0801-2831_S_map.mod
wobs   J0801-2831_S_uvs.fits
! Writing UV FITS file: J0801-2831_S_uvs.fits
wwins  J0801-2831_S_map.win
! wwins: Wrote 3 windows to J0801-2831_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102169 Jy
! Component: 100  -  total flux cleaned = -0.00106598 Jy
! Component: 150  -  total flux cleaned = -0.0011036 Jy
! Component: 200  -  total flux cleaned = -0.00117664 Jy
! Component: 250  -  total flux cleaned = -0.00135441 Jy
! Component: 300  -  total flux cleaned = -0.00152653 Jy
! Component: 350  -  total flux cleaned = -0.00169311 Jy
! Component: 400  -  total flux cleaned = -0.00188722 Jy
! Component: 450  -  total flux cleaned = -0.00213976 Jy
! Component: 500  -  total flux cleaned = -0.00226297 Jy
! Component: 550  -  total flux cleaned = -0.00256491 Jy
! Component: 600  -  total flux cleaned = -0.00274173 Jy
! Component: 650  -  total flux cleaned = -0.00282847 Jy
! Component: 700  -  total flux cleaned = -0.0029702 Jy
! Component: 750  -  total flux cleaned = -0.00313684 Jy
! Component: 800  -  total flux cleaned = -0.00321882 Jy
! Component: 850  -  total flux cleaned = -0.00340675 Jy
! Component: 900  -  total flux cleaned = -0.00353871 Jy
! Component: 950  -  total flux cleaned = -0.00366874 Jy
! Component: 1000  -  total flux cleaned = -0.003746 Jy
! Component: 1050  -  total flux cleaned = -0.00389734 Jy
! Component: 1100  -  total flux cleaned = -0.003972 Jy
! Component: 1150  -  total flux cleaned = -0.00409417 Jy
! Component: 1200  -  total flux cleaned = -0.00406993 Jy
! Component: 1250  -  total flux cleaned = -0.00411755 Jy
! Component: 1300  -  total flux cleaned = -0.00418799 Jy
! Component: 1350  -  total flux cleaned = -0.00421096 Jy
! Component: 1400  -  total flux cleaned = -0.0043027 Jy
! Component: 1450  -  total flux cleaned = -0.00432503 Jy
! Component: 1500  -  total flux cleaned = -0.00432535 Jy
! Component: 1550  -  total flux cleaned = -0.00443609 Jy
! Component: 1600  -  total flux cleaned = -0.00439215 Jy
! Component: 1650  -  total flux cleaned = -0.00439165 Jy
! Component: 1700  -  total flux cleaned = -0.0043702 Jy
! Component: 1750  -  total flux cleaned = -0.00439134 Jy
! Component: 1800  -  total flux cleaned = -0.00441203 Jy
! Component: 1850  -  total flux cleaned = -0.00441225 Jy
! Component: 1900  -  total flux cleaned = -0.00439185 Jy
! Component: 1950  -  total flux cleaned = -0.00445261 Jy
! Component: 2000  -  total flux cleaned = -0.00447256 Jy
! Component: 2050  -  total flux cleaned = -0.00445257 Jy
! Component: 2100  -  total flux cleaned = -0.00445242 Jy
! Component: 2150  -  total flux cleaned = -0.00439402 Jy
! Component: 2200  -  total flux cleaned = -0.00450986 Jy
! Component: 2250  -  total flux cleaned = -0.00452862 Jy
! Component: 2300  -  total flux cleaned = -0.00449059 Jy
! Component: 2350  -  total flux cleaned = -0.00443465 Jy
! Component: 2400  -  total flux cleaned = -0.00445324 Jy
! Component: 2450  -  total flux cleaned = -0.0044899 Jy
! Component: 2500  -  total flux cleaned = -0.00450801 Jy
! Component: 2550  -  total flux cleaned = -0.00449005 Jy
! Component: 2600  -  total flux cleaned = -0.00447233 Jy
! Component: 2650  -  total flux cleaned = -0.00450789 Jy
! Component: 2700  -  total flux cleaned = -0.00456089 Jy
! Component: 2750  -  total flux cleaned = -0.00456108 Jy
! Component: 2800  -  total flux cleaned = -0.00459536 Jy
! Component: 2850  -  total flux cleaned = -0.00454396 Jy
! Component: 2900  -  total flux cleaned = -0.00462938 Jy
! Component: 2950  -  total flux cleaned = -0.00469684 Jy
! Component: 3000  -  total flux cleaned = -0.0046968 Jy
! Component: 3050  -  total flux cleaned = -0.00469675 Jy
! Component: 3100  -  total flux cleaned = -0.0047297 Jy
! Component: 3150  -  total flux cleaned = -0.00468061 Jy
! Component: 3200  -  total flux cleaned = -0.00468098 Jy
! Component: 3250  -  total flux cleaned = -0.00469719 Jy
! Component: 3300  -  total flux cleaned = -0.00472925 Jy
! Component: 3350  -  total flux cleaned = -0.00476099 Jy
! Component: 3400  -  total flux cleaned = -0.0047766 Jy
! Component: 3450  -  total flux cleaned = -0.00482356 Jy
! Component: 3500  -  total flux cleaned = -0.00473061 Jy
! Component: 3550  -  total flux cleaned = -0.00471531 Jy
! Component: 3600  -  total flux cleaned = -0.00476115 Jy
! Component: 3650  -  total flux cleaned = -0.00471566 Jy
! Component: 3700  -  total flux cleaned = -0.00474569 Jy
! Component: 3750  -  total flux cleaned = -0.00470089 Jy
! Component: 3800  -  total flux cleaned = -0.00468597 Jy
! Component: 3850  -  total flux cleaned = -0.00470078 Jy
! Component: 3900  -  total flux cleaned = -0.00465692 Jy
! Component: 3950  -  total flux cleaned = -0.00467147 Jy
! Component: 4000  -  total flux cleaned = -0.00467137 Jy
! Component: 4050  -  total flux cleaned = -0.00467151 Jy
! Total flux subtracted in 4096 components = -0.00467148 Jy
! Clean residual min=-0.000712 max=0.000760 Jy/beam
! Clean residual mean=-0.000001 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.181535 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 507 components and 0.181535 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0801-2831_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.366 x 10.2 at -0.05401 degrees (North through East)
! Clean map  min=-0.0028635  max=0.10744 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0801-2831_S_map.fits
wmodel /vlbi/uf001/uva//J0801-2831_S_map.mod
! Writing 507 model components to file: /vlbi/uf001/uva//J0801-2831_S_map.mod
wobs   /vlbi/uf001/uva//J0801-2831_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0801-2831_S_uvs.fits
wwins  /vlbi/uf001/uva//J0801-2831_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0801-2831_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10744 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000264668 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.739024 0.739024 1.47805 2.9561 5.91219 11.8244 23.6488 47.2975 94.5951
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  405.94 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0801-2831_S_dfm.log closed on Sun Jan 13 23:43:59 2019