! Started logfile: /vlbi/uf001/uvm//J0800-3959_S_a_dfm.log on Sun Jan 13 21:04:52 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0800-3959_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0800-3959_S_a_uvm.fits
! AN table 1: 123 integrations on 15 of 15 possible baselines.
! AN table 2: 37 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.992561 visibilities/baseline/integration-bin.
! Found source: J0800-3959
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5604 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0800-3959_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 74 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 74 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 74 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.018361Jy  sigma=13.525846
! Fit after  self-cal, rms=0.873480Jy  sigma=11.491460
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.199 mas, bmaj=42.57 mas, bpa=-6.997 degrees
! Estimated noise=0.910807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103074 Jy
! Component: 100  -  total flux cleaned = 0.139318 Jy
! Total flux subtracted in 100 components = 0.139318 Jy
! Clean residual min=-0.009083 max=0.016728 Jy/beam
! Clean residual mean=-0.000198 rms=0.003530 Jy/beam
! Combined flux in latest and established models = 0.139318 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.139318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096234Jy  sigma=1.224638
! Fit after  self-cal, rms=0.095918Jy  sigma=1.219387
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.535 mas, bmaj=51.21 mas, bpa=-6.166 degrees
! Estimated noise=0.73705 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223479 Jy
! Component: 100  -  total flux cleaned = 0.0335804 Jy
! Component: 150  -  total flux cleaned = 0.0399109 Jy
! Component: 200  -  total flux cleaned = 0.0437423 Jy
! Total flux subtracted in 200 components = 0.0437423 Jy
! Clean residual min=-0.003431 max=0.003838 Jy/beam
! Clean residual mean=-0.000033 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.18306 Jy
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 136 components and 0.18306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091245Jy  sigma=1.145340
! Fit after  self-cal, rms=0.091237Jy  sigma=1.143265
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.535 x 51.21 at -6.166 degrees (North through East)
! Clean map  min=-0.0036854  max=0.13396 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.00     LA        0.95     NL        1.12     
!   OV        0.96     PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        0.99     LA        0.98     NL        1.18     
!   OV        0.97     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.03     LA        1.00     NL        1.18     
!   OV        0.96     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.091237Jy  sigma=1.143265
! Fit after  self-cal, rms=0.096087Jy  sigma=1.137220
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.837 mas, bmaj=52 mas, bpa=-5.774 degrees
! Estimated noise=0.742279 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00031115 Jy
! Component: 100  -  total flux cleaned = -0.00038428 Jy
! Component: 150  -  total flux cleaned = -0.000597255 Jy
! Component: 200  -  total flux cleaned = -0.000771429 Jy
! Total flux subtracted in 200 components = -0.000771429 Jy
! Clean residual min=-0.002714 max=0.003068 Jy/beam
! Clean residual mean=-0.000027 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.182289 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 169 components and 0.182289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095970Jy  sigma=1.136306
! Fit after  self-cal, rms=0.096107Jy  sigma=1.136005
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096107Jy  sigma=1.136005
! Fit after  self-cal, rms=0.095642Jy  sigma=1.133519
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.789 mas, bmaj=51.05 mas, bpa=-6.101 degrees
! Estimated noise=0.737932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162278 Jy
! Component: 100  -  total flux cleaned = 0.000164156 Jy
! Component: 150  -  total flux cleaned = 0.000163659 Jy
! Component: 200  -  total flux cleaned = 0.000164645 Jy
! Total flux subtracted in 200 components = 0.000164645 Jy
! Clean residual min=-0.002393 max=0.002559 Jy/beam
! Clean residual mean=0.000003 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.182454 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 197 components and 0.182454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095623Jy  sigma=1.133328
! Fit after  self-cal, rms=0.095636Jy  sigma=1.133256
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.45379e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103748 Jy
! Component: 150  -  total flux cleaned = 0.000139412 Jy
! Component: 200  -  total flux cleaned = 0.000138234 Jy
! Total flux subtracted in 200 components = 0.000138234 Jy
! Clean residual min=-0.002349 max=0.002572 Jy/beam
! Clean residual mean=0.000004 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.182592 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 213 components and 0.182592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095627Jy  sigma=1.133193
! Fit after  self-cal, rms=0.095630Jy  sigma=1.133186
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095630Jy  sigma=1.133186
! Fit after  self-cal, rms=0.095922Jy  sigma=1.133079
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.79 mas, bmaj=50.93 mas, bpa=-6.086 degrees
! Estimated noise=0.737861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122404 Jy
! Component: 100  -  total flux cleaned = 0.000125029 Jy
! Component: 150  -  total flux cleaned = 0.000155844 Jy
! Component: 200  -  total flux cleaned = 0.000170106 Jy
! Total flux subtracted in 200 components = 0.000170106 Jy
! Clean residual min=-0.002362 max=0.002597 Jy/beam
! Clean residual mean=0.000008 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.182762 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 236 components and 0.182762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095910Jy  sigma=1.132982
! Fit after  self-cal, rms=0.095921Jy  sigma=1.132973
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.11645e-05 Jy
! Component: 100  -  total flux cleaned = 9.9063e-05 Jy
! Component: 150  -  total flux cleaned = 0.000125213 Jy
! Component: 200  -  total flux cleaned = 0.000111954 Jy
! Total flux subtracted in 200 components = 0.000111954 Jy
! Clean residual min=-0.002359 max=0.002575 Jy/beam
! Clean residual mean=0.000009 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.182874 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 257 components and 0.182874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095916Jy  sigma=1.132940
! Fit after  self-cal, rms=0.095917Jy  sigma=1.132936
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095917Jy  sigma=1.132936
! Fit after  self-cal, rms=0.096114Jy  sigma=1.132888
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.08 mas, bmaj=55.48 mas, bpa=-5.355 degrees
! Estimated noise=0.731041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239604 Jy
! Component: 100  -  total flux cleaned = 0.000237528 Jy
! Component: 150  -  total flux cleaned = 0.000237481 Jy
! Component: 200  -  total flux cleaned = 0.000248686 Jy
! Total flux subtracted in 200 components = 0.000248686 Jy
! Clean residual min=-0.002335 max=0.002413 Jy/beam
! Clean residual mean=0.000009 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.183123 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 299 components and 0.183123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096108Jy  sigma=1.132828
! Fit after  self-cal, rms=0.096117Jy  sigma=1.132820
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.58583e-05 Jy
! Component: 100  -  total flux cleaned = -3.75187e-05 Jy
! Component: 150  -  total flux cleaned = -1.52985e-05 Jy
! Component: 200  -  total flux cleaned = 5.53301e-06 Jy
! Total flux subtracted in 200 components = 5.53301e-06 Jy
! Clean residual min=-0.002352 max=0.002391 Jy/beam
! Clean residual mean=0.000009 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.183128 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 307 components and 0.183128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096114Jy  sigma=1.132790
! Fit after  self-cal, rms=0.096115Jy  sigma=1.132785
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.79 mas, bmaj=50.85 mas, bpa=-6.055 degrees
! Estimated noise=0.737816 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.79 x 50.85 at -6.055 degrees (North through East)
! Clean map  min=-0.0023849  max=0.13414 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.415 mas, bmaj=42.27 mas, bpa=-6.871 degrees
! Estimated noise=0.910925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101839 Jy
! Component: 100  -  total flux cleaned = 0.138482 Jy
! Component: 150  -  total flux cleaned = 0.15679 Jy
! Component: 200  -  total flux cleaned = 0.167004 Jy
! Total flux subtracted in 200 components = 0.167004 Jy
! Clean residual min=-0.003474 max=0.005115 Jy/beam
! Clean residual mean=-0.000066 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.167004 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 73 model components to the UV plane model.
! The established model now contains 73 components and 0.167004 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.79 mas, bmaj=50.85 mas, bpa=-6.055 degrees
! Estimated noise=0.737816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00691101 Jy
! Component: 100  -  total flux cleaned = 0.0106482 Jy
! Component: 150  -  total flux cleaned = 0.0130289 Jy
! Component: 200  -  total flux cleaned = 0.0146017 Jy
! Total flux subtracted in 200 components = 0.0146017 Jy
! Clean residual min=-0.002693 max=0.002779 Jy/beam
! Clean residual mean=-0.000003 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.181606 Jy
! Adding 93 model components to the UV plane model.
! The established model now contains 166 components and 0.181606 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.08 mas, bmaj=55.48 mas, bpa=-5.355 degrees
! Estimated noise=0.731041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000985146 Jy
! Component: 100  -  total flux cleaned = 0.00122652 Jy
! Component: 150  -  total flux cleaned = 0.00142676 Jy
! Component: 200  -  total flux cleaned = 0.00155414 Jy
! Total flux subtracted in 200 components = 0.00155414 Jy
! Clean residual min=-0.002569 max=0.002493 Jy/beam
! Clean residual mean=0.000005 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.18316 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.91199e-05 Jy
! Component: 100  -  total flux cleaned = 5.63015e-05 Jy
! Component: 150  -  total flux cleaned = 9.12184e-05 Jy
! Component: 200  -  total flux cleaned = 0.000125132 Jy
! Total flux subtracted in 200 components = 0.000125132 Jy
! Clean residual min=-0.002526 max=0.002494 Jy/beam
! Clean residual mean=0.000006 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.183285 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 207 components and 0.183285 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.79 mas, bmaj=50.85 mas, bpa=-6.055 degrees
! Estimated noise=0.737816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.01413e-05 Jy
! Component: 100  -  total flux cleaned = -1.7153e-05 Jy
! Component: 150  -  total flux cleaned = 2.25368e-05 Jy
! Component: 200  -  total flux cleaned = 4.0948e-05 Jy
! Total flux subtracted in 200 components = 4.0948e-05 Jy
! Clean residual min=-0.002587 max=0.002505 Jy/beam
! Clean residual mean=0.000006 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.183326 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 220 components and 0.183326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096139Jy  sigma=1.132802
! Fit after  self-cal, rms=0.096144Jy  sigma=1.132750
wmodel J0800-3959_S_a_map.mod
! Writing 220 model components to file: J0800-3959_S_a_map.mod
wobs   J0800-3959_S_a_uvs.fits
! Writing UV FITS file: J0800-3959_S_a_uvs.fits
wwins  J0800-3959_S_a_map.win
! wwins: Wrote 1 windows to J0800-3959_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140591 Jy
! Component: 100  -  total flux cleaned = 0.000141079 Jy
! Component: 150  -  total flux cleaned = 0.000140695 Jy
! Component: 200  -  total flux cleaned = 0.000142338 Jy
! Component: 250  -  total flux cleaned = 0.000207404 Jy
! Component: 300  -  total flux cleaned = 0.000361664 Jy
! Component: 350  -  total flux cleaned = 0.000538307 Jy
! Component: 400  -  total flux cleaned = 0.000623159 Jy
! Component: 450  -  total flux cleaned = 0.000758956 Jy
! Component: 500  -  total flux cleaned = 0.000837356 Jy
! Component: 550  -  total flux cleaned = 0.000937145 Jy
! Component: 600  -  total flux cleaned = 0.00103355 Jy
! Component: 650  -  total flux cleaned = 0.00107948 Jy
! Component: 700  -  total flux cleaned = 0.00112486 Jy
! Component: 750  -  total flux cleaned = 0.00119088 Jy
! Component: 800  -  total flux cleaned = 0.001234 Jy
! Component: 850  -  total flux cleaned = 0.00123505 Jy
! Component: 900  -  total flux cleaned = 0.0012355 Jy
! Component: 950  -  total flux cleaned = 0.00123581 Jy
! Component: 1000  -  total flux cleaned = 0.00123578 Jy
! Component: 1050  -  total flux cleaned = 0.00117971 Jy
! Component: 1100  -  total flux cleaned = 0.0011618 Jy
! Component: 1150  -  total flux cleaned = 0.00114434 Jy
! Component: 1200  -  total flux cleaned = 0.00112643 Jy
! Component: 1250  -  total flux cleaned = 0.00114349 Jy
! Component: 1300  -  total flux cleaned = 0.00110949 Jy
! Component: 1350  -  total flux cleaned = 0.00115985 Jy
! Component: 1400  -  total flux cleaned = 0.00115965 Jy
! Component: 1450  -  total flux cleaned = 0.00112756 Jy
! Component: 1500  -  total flux cleaned = 0.00119115 Jy
! Component: 1550  -  total flux cleaned = 0.0011908 Jy
! Component: 1600  -  total flux cleaned = 0.00122128 Jy
! Component: 1650  -  total flux cleaned = 0.00122123 Jy
! Component: 1700  -  total flux cleaned = 0.00128086 Jy
! Component: 1750  -  total flux cleaned = 0.00131004 Jy
! Component: 1800  -  total flux cleaned = 0.00133889 Jy
! Component: 1850  -  total flux cleaned = 0.00135322 Jy
! Component: 1900  -  total flux cleaned = 0.00135326 Jy
! Component: 1950  -  total flux cleaned = 0.00138123 Jy
! Component: 2000  -  total flux cleaned = 0.00138148 Jy
! Component: 2050  -  total flux cleaned = 0.00138142 Jy
! Component: 2100  -  total flux cleaned = 0.00140819 Jy
! Component: 2150  -  total flux cleaned = 0.00143451 Jy
! Component: 2200  -  total flux cleaned = 0.00143413 Jy
! Component: 2250  -  total flux cleaned = 0.00139544 Jy
! Component: 2300  -  total flux cleaned = 0.00135739 Jy
! Component: 2350  -  total flux cleaned = 0.00138259 Jy
! Component: 2400  -  total flux cleaned = 0.00137011 Jy
! Component: 2450  -  total flux cleaned = 0.00139457 Jy
! Component: 2500  -  total flux cleaned = 0.00140681 Jy
! Component: 2550  -  total flux cleaned = 0.00143092 Jy
! Component: 2600  -  total flux cleaned = 0.00146655 Jy
! Component: 2650  -  total flux cleaned = 0.00149007 Jy
! Component: 2700  -  total flux cleaned = 0.00154872 Jy
! Component: 2750  -  total flux cleaned = 0.00158356 Jy
! Component: 2800  -  total flux cleaned = 0.00161808 Jy
! Component: 2850  -  total flux cleaned = 0.00165233 Jy
! Component: 2900  -  total flux cleaned = 0.00168639 Jy
! Component: 2950  -  total flux cleaned = 0.00172024 Jy
! Component: 3000  -  total flux cleaned = 0.00175389 Jy
! Component: 3050  -  total flux cleaned = 0.0017983 Jy
! Component: 3100  -  total flux cleaned = 0.0018093 Jy
! Component: 3150  -  total flux cleaned = 0.00182031 Jy
! Component: 3200  -  total flux cleaned = 0.00188566 Jy
! Component: 3250  -  total flux cleaned = 0.00191804 Jy
! Component: 3300  -  total flux cleaned = 0.00193945 Jy
! Component: 3350  -  total flux cleaned = 0.00197133 Jy
! Component: 3400  -  total flux cleaned = 0.00200295 Jy
! Component: 3450  -  total flux cleaned = 0.00201339 Jy
! Component: 3500  -  total flux cleaned = 0.00205509 Jy
! Component: 3550  -  total flux cleaned = 0.00206547 Jy
! Component: 3600  -  total flux cleaned = 0.00210672 Jy
! Component: 3650  -  total flux cleaned = 0.00211696 Jy
! Component: 3700  -  total flux cleaned = 0.00215772 Jy
! Component: 3750  -  total flux cleaned = 0.00219822 Jy
! Component: 3800  -  total flux cleaned = 0.00219818 Jy
! Component: 3850  -  total flux cleaned = 0.00224819 Jy
! Component: 3900  -  total flux cleaned = 0.00224815 Jy
! Component: 3950  -  total flux cleaned = 0.00226796 Jy
! Component: 4000  -  total flux cleaned = 0.00230735 Jy
! Component: 4050  -  total flux cleaned = 0.00233667 Jy
! Total flux subtracted in 4096 components = 0.00233671 Jy
! Clean residual min=-0.000596 max=0.000532 Jy/beam
! Clean residual mean=0.000003 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.185663 Jy
keep
! Adding 433 model components to the UV plane model.
! The established model now contains 653 components and 0.185663 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0800-3959_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.79 x 50.85 at -6.055 degrees (North through East)
! Clean map  min=-0.0020984  max=0.13334 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0800-3959_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0800-3959_S_a_map.mod
! Writing 653 model components to file: /vlbi/uf001/uvm//J0800-3959_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0800-3959_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0800-3959_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0800-3959_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J0800-3959_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133339 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00021749 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.489332 0.489332 0.978664 1.95733 3.91466 7.82931 15.6586 31.3173 62.6345
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  613.08 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0800-3959_S_a_dfm.log closed on Sun Jan 13 21:04:56 2019