! Started logfile: /vlbi/uf001/uva//J0755+6312_S_dfm.log on Sun Jan 13 23:42:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0755+6312_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0755+6312_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.920062 visibilities/baseline/integration-bin.
! Found source: J0755+6312
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8943 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0755+6312_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004089Jy  sigma=20.760975
! Fit after  self-cal, rms=0.900780Jy  sigma=18.650125
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=3.641 mas, bpa=25.7 degrees
! Estimated noise=0.618636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0789606 Jy
! Component: 100  -  total flux cleaned = 0.096216 Jy
! Total flux subtracted in 100 components = 0.096216 Jy
! Clean residual min=-0.003592 max=0.004924 Jy/beam
! Clean residual mean=-0.000015 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.096216 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.096216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064129Jy  sigma=1.220685
! Fit after  self-cal, rms=0.064110Jy  sigma=1.220474
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.995 mas, bmaj=4.388 mas, bpa=26.71 degrees
! Estimated noise=0.368595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430643 Jy
! Component: 100  -  total flux cleaned = 0.00590991 Jy
! Component: 150  -  total flux cleaned = 0.00671944 Jy
! Component: 200  -  total flux cleaned = 0.00718053 Jy
! Total flux subtracted in 200 components = 0.00718053 Jy
! Clean residual min=-0.002397 max=0.002389 Jy/beam
! Clean residual mean=0.000012 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.103397 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 24 components and 0.103397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063855Jy  sigma=1.214308
! Fit after  self-cal, rms=0.063858Jy  sigma=1.214294
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.995 x 4.388 at 26.71 degrees (North through East)
! Clean map  min=-0.0023295  max=0.10115 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.00     KP        1.01     
!   LA        0.97     MK        1.05     NL        1.05     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.05     OV        0.83     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     HN        1.00     KP        1.02     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.95     
!   PT        0.98     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.063858Jy  sigma=1.214294
! Fit after  self-cal, rms=0.063346Jy  sigma=1.205758
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=4.411 mas, bpa=26.95 degrees
! Estimated noise=0.368422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00049267 Jy
! Component: 100  -  total flux cleaned = -0.000547784 Jy
! Component: 150  -  total flux cleaned = -0.000582959 Jy
! Component: 200  -  total flux cleaned = -0.000602477 Jy
! Total flux subtracted in 200 components = -0.000602477 Jy
! Clean residual min=-0.002104 max=0.002503 Jy/beam
! Clean residual mean=0.000012 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.102794 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 29 components and 0.102794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063337Jy  sigma=1.205667
! Fit after  self-cal, rms=0.063367Jy  sigma=1.205473
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063367Jy  sigma=1.205473
! Fit after  self-cal, rms=0.062841Jy  sigma=1.196997
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.012 mas, bmaj=4.407 mas, bpa=27.15 degrees
! Estimated noise=0.368068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.27512e-05 Jy
! Component: 100  -  total flux cleaned = -6.46347e-05 Jy
! Component: 150  -  total flux cleaned = -4.9745e-05 Jy
! Component: 200  -  total flux cleaned = -3.58734e-05 Jy
! Total flux subtracted in 200 components = -3.58734e-05 Jy
! Clean residual min=-0.001842 max=0.002225 Jy/beam
! Clean residual mean=0.000005 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.102758 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.102758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062838Jy  sigma=1.196966
! Fit after  self-cal, rms=0.062860Jy  sigma=1.196802
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-93, -64).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189891 Jy
! Component: 100  -  total flux cleaned = 0.00203779 Jy
! Component: 150  -  total flux cleaned = 0.00200007 Jy
! Component: 200  -  total flux cleaned = 0.00206472 Jy
! Total flux subtracted in 200 components = 0.00206472 Jy
! Clean residual min=-0.001751 max=0.001417 Jy/beam
! Clean residual mean=0.000003 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.104823 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 59 components and 0.104823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062781Jy  sigma=1.195177
! Fit after  self-cal, rms=0.062778Jy  sigma=1.195094
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062778Jy  sigma=1.195094
! Fit after  self-cal, rms=0.062749Jy  sigma=1.195039
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=4.41 mas, bpa=27.14 degrees
! Estimated noise=0.367491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000309935 Jy
! Component: 100  -  total flux cleaned = 0.000393867 Jy
! Component: 150  -  total flux cleaned = 0.0004718 Jy
! Component: 200  -  total flux cleaned = 0.000566097 Jy
! Total flux subtracted in 200 components = 0.000566097 Jy
! Clean residual min=-0.001805 max=0.001385 Jy/beam
! Clean residual mean=0.000002 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.105389 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 67 components and 0.105389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062728Jy  sigma=1.194603
! Fit after  self-cal, rms=0.062730Jy  sigma=1.194591
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.35523e-05 Jy
! Component: 100  -  total flux cleaned = 0.000158134 Jy
! Component: 150  -  total flux cleaned = 0.000217529 Jy
! Component: 200  -  total flux cleaned = 0.000254884 Jy
! Total flux subtracted in 200 components = 0.000254884 Jy
! Clean residual min=-0.001808 max=0.001418 Jy/beam
! Clean residual mean=0.000002 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.105644 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.105644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062718Jy  sigma=1.194349
! Fit after  self-cal, rms=0.062718Jy  sigma=1.194345
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062718Jy  sigma=1.194345
! Fit after  self-cal, rms=0.062743Jy  sigma=1.194318
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.905 mas, bmaj=8.699 mas, bpa=55.47 degrees
! Estimated noise=0.468649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000473739 Jy
! Component: 100  -  total flux cleaned = 0.000634738 Jy
! Component: 150  -  total flux cleaned = 0.000716226 Jy
! Component: 200  -  total flux cleaned = 0.00076908 Jy
! Total flux subtracted in 200 components = 0.00076908 Jy
! Clean residual min=-0.002275 max=0.001646 Jy/beam
! Clean residual mean=0.000004 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.106413 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 81 components and 0.106413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062742Jy  sigma=1.194292
! Fit after  self-cal, rms=0.062743Jy  sigma=1.194286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.92143e-05 Jy
! Component: 100  -  total flux cleaned = 0.000117767 Jy
! Component: 150  -  total flux cleaned = 0.00014401 Jy
! Component: 200  -  total flux cleaned = 0.000161139 Jy
! Total flux subtracted in 200 components = 0.000161139 Jy
! Clean residual min=-0.002277 max=0.001652 Jy/beam
! Clean residual mean=0.000004 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.106574 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.106574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062743Jy  sigma=1.194277
! Fit after  self-cal, rms=0.062743Jy  sigma=1.194276
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=4.412 mas, bpa=27.33 degrees
! Estimated noise=0.367463 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.015 x 4.412 at 27.33 degrees (North through East)
! Clean map  min=-0.0017528  max=0.10101 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.421 mas, bmaj=3.659 mas, bpa=27.83 degrees
! Estimated noise=0.617688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0788229 Jy
! Component: 100  -  total flux cleaned = 0.0960976 Jy
! Component: 150  -  total flux cleaned = 0.0999885 Jy
! Component: 200  -  total flux cleaned = 0.100299 Jy
! Total flux subtracted in 200 components = 0.100299 Jy
! Clean residual min=-0.003094 max=0.002649 Jy/beam
! Clean residual mean=-0.000016 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.100299 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.100299 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=4.412 mas, bpa=27.33 degrees
! Estimated noise=0.367463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213133 Jy
! Component: 100  -  total flux cleaned = 0.00282668 Jy
! Component: 150  -  total flux cleaned = 0.00327913 Jy
! Component: 200  -  total flux cleaned = 0.00348355 Jy
! Total flux subtracted in 200 components = 0.00348355 Jy
! Clean residual min=-0.001824 max=0.001403 Jy/beam
! Clean residual mean=0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.103783 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 39 components and 0.103783 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.905 mas, bmaj=8.699 mas, bpa=55.47 degrees
! Estimated noise=0.468649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000936363 Jy
! Component: 100  -  total flux cleaned = 0.00157407 Jy
! Component: 150  -  total flux cleaned = 0.00204772 Jy
! Component: 200  -  total flux cleaned = 0.00224657 Jy
! Total flux subtracted in 200 components = 0.00224657 Jy
! Clean residual min=-0.002271 max=0.001638 Jy/beam
! Clean residual mean=0.000004 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.10603 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132923 Jy
! Component: 100  -  total flux cleaned = 0.000204966 Jy
! Component: 150  -  total flux cleaned = 0.000259808 Jy
! Component: 200  -  total flux cleaned = 0.000311536 Jy
! Total flux subtracted in 200 components = 0.000311536 Jy
! Clean residual min=-0.002270 max=0.001644 Jy/beam
! Clean residual mean=0.000004 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.106341 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 70 components and 0.106341 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=4.412 mas, bpa=27.33 degrees
! Estimated noise=0.367463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000250859 Jy
! Component: 100  -  total flux cleaned = -0.000196432 Jy
! Component: 150  -  total flux cleaned = -7.21669e-05 Jy
! Component: 200  -  total flux cleaned = 1.73441e-05 Jy
! Total flux subtracted in 200 components = 1.73441e-05 Jy
! Clean residual min=-0.001800 max=0.001363 Jy/beam
! Clean residual mean=0.000002 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.106358 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 0.106358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062753Jy  sigma=1.194448
! Fit after  self-cal, rms=0.062749Jy  sigma=1.194419
wmodel J0755+6312_S_map.mod
! Writing 82 model components to file: J0755+6312_S_map.mod
wobs   J0755+6312_S_uvs.fits
! Writing UV FITS file: J0755+6312_S_uvs.fits
wwins  J0755+6312_S_map.win
! wwins: Wrote 2 windows to J0755+6312_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000701477 Jy
! Component: 100  -  total flux cleaned = -0.000936949 Jy
! Component: 150  -  total flux cleaned = -0.00108341 Jy
! Component: 200  -  total flux cleaned = -0.00120123 Jy
! Component: 250  -  total flux cleaned = -0.00124695 Jy
! Component: 300  -  total flux cleaned = -0.00126955 Jy
! Component: 350  -  total flux cleaned = -0.00126976 Jy
! Component: 400  -  total flux cleaned = -0.00129133 Jy
! Component: 450  -  total flux cleaned = -0.00129155 Jy
! Component: 500  -  total flux cleaned = -0.00135342 Jy
! Component: 550  -  total flux cleaned = -0.00147446 Jy
! Component: 600  -  total flux cleaned = -0.0015736 Jy
! Component: 650  -  total flux cleaned = -0.00167178 Jy
! Component: 700  -  total flux cleaned = -0.00174913 Jy
! Component: 750  -  total flux cleaned = -0.00188206 Jy
! Component: 800  -  total flux cleaned = -0.00195661 Jy
! Component: 850  -  total flux cleaned = -0.00206712 Jy
! Component: 900  -  total flux cleaned = -0.00212162 Jy
! Component: 950  -  total flux cleaned = -0.00215775 Jy
! Component: 1000  -  total flux cleaned = -0.00219315 Jy
! Component: 1050  -  total flux cleaned = -0.00224591 Jy
! Component: 1100  -  total flux cleaned = -0.00231518 Jy
! Component: 1150  -  total flux cleaned = -0.00236629 Jy
! Component: 1200  -  total flux cleaned = -0.00241699 Jy
! Component: 1250  -  total flux cleaned = -0.00248373 Jy
! Component: 1300  -  total flux cleaned = -0.00253313 Jy
! Component: 1350  -  total flux cleaned = -0.00256543 Jy
! Component: 1400  -  total flux cleaned = -0.00259747 Jy
! Component: 1450  -  total flux cleaned = -0.00267735 Jy
! Component: 1500  -  total flux cleaned = -0.00272459 Jy
! Component: 1550  -  total flux cleaned = -0.00281817 Jy
! Component: 1600  -  total flux cleaned = -0.00281788 Jy
! Component: 1650  -  total flux cleaned = -0.00281803 Jy
! Component: 1700  -  total flux cleaned = -0.00292431 Jy
! Component: 1750  -  total flux cleaned = -0.00292448 Jy
! Component: 1800  -  total flux cleaned = -0.0030137 Jy
! Component: 1850  -  total flux cleaned = -0.0030285 Jy
! Component: 1900  -  total flux cleaned = -0.00305756 Jy
! Component: 1950  -  total flux cleaned = -0.00302856 Jy
! Component: 2000  -  total flux cleaned = -0.00308577 Jy
! Component: 2050  -  total flux cleaned = -0.00305745 Jy
! Component: 2100  -  total flux cleaned = -0.00309984 Jy
! Component: 2150  -  total flux cleaned = -0.00307215 Jy
! Component: 2200  -  total flux cleaned = -0.00311366 Jy
! Component: 2250  -  total flux cleaned = -0.00312729 Jy
! Component: 2300  -  total flux cleaned = -0.00316803 Jy
! Component: 2350  -  total flux cleaned = -0.00312751 Jy
! Component: 2400  -  total flux cleaned = -0.00315426 Jy
! Component: 2450  -  total flux cleaned = -0.00315432 Jy
! Component: 2500  -  total flux cleaned = -0.003128 Jy
! Component: 2550  -  total flux cleaned = -0.00315419 Jy
! Component: 2600  -  total flux cleaned = -0.00316706 Jy
! Component: 2650  -  total flux cleaned = -0.00314103 Jy
! Component: 2700  -  total flux cleaned = -0.00307713 Jy
! Component: 2750  -  total flux cleaned = -0.00308987 Jy
! Component: 2800  -  total flux cleaned = -0.00310247 Jy
! Component: 2850  -  total flux cleaned = -0.0030524 Jy
! Component: 2900  -  total flux cleaned = -0.00297791 Jy
! Component: 2950  -  total flux cleaned = -0.00296563 Jy
! Component: 3000  -  total flux cleaned = -0.00295345 Jy
! Component: 3050  -  total flux cleaned = -0.00296572 Jy
! Component: 3100  -  total flux cleaned = -0.00296581 Jy
! Component: 3150  -  total flux cleaned = -0.0029298 Jy
! Component: 3200  -  total flux cleaned = -0.00295386 Jy
! Component: 3250  -  total flux cleaned = -0.00291823 Jy
! Component: 3300  -  total flux cleaned = -0.00290657 Jy
! Component: 3350  -  total flux cleaned = -0.00289489 Jy
! Component: 3400  -  total flux cleaned = -0.0028717 Jy
! Component: 3450  -  total flux cleaned = -0.00283704 Jy
! Component: 3500  -  total flux cleaned = -0.00282561 Jy
! Component: 3550  -  total flux cleaned = -0.00282557 Jy
! Component: 3600  -  total flux cleaned = -0.00282548 Jy
! Component: 3650  -  total flux cleaned = -0.00281422 Jy
! Component: 3700  -  total flux cleaned = -0.00279175 Jy
! Component: 3750  -  total flux cleaned = -0.00276941 Jy
! Component: 3800  -  total flux cleaned = -0.00278056 Jy
! Component: 3850  -  total flux cleaned = -0.00273642 Jy
! Component: 3900  -  total flux cleaned = -0.00269263 Jy
! Component: 3950  -  total flux cleaned = -0.00272533 Jy
! Component: 4000  -  total flux cleaned = -0.00266034 Jy
! Component: 4050  -  total flux cleaned = -0.00266041 Jy
! Total flux subtracted in 4096 components = -0.00266038 Jy
! Clean residual min=-0.000555 max=0.000694 Jy/beam
! Clean residual mean=-0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.103698 Jy
keep
! Adding 315 model components to the UV plane model.
! The established model now contains 397 components and 0.103698 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0755+6312_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.015 x 4.412 at 27.33 degrees (North through East)
! Clean map  min=-0.0014973  max=0.10087 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0755+6312_S_map.fits
wmodel /vlbi/uf001/uva//J0755+6312_S_map.mod
! Writing 397 model components to file: /vlbi/uf001/uva//J0755+6312_S_map.mod
wobs   /vlbi/uf001/uva//J0755+6312_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0755+6312_S_uvs.fits
wwins  /vlbi/uf001/uva//J0755+6312_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0755+6312_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.100871 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000192359 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.572094 0.572094 1.14419 2.28838 4.57676 9.15351 18.307 36.614 73.2281
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.1 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  524.389 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0755+6312_S_dfm.log closed on Sun Jan 13 23:42:26 2019