! Started logfile: /vlbi/uf001/uva//J0754-1147_X_dfm.log on Sun Jan 13 23:42:03 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0754-1147_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0754-1147_X_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.853968 visibilities/baseline/integration-bin. ! Found source: J0754-1147 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 12912 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0754-1147_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.213489Jy sigma=20.476122 ! Fit after self-cal, rms=0.388335Jy sigma=6.875938 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6319 mas, bmaj=1.683 mas, bpa=-4.892 degrees ! Estimated noise=0.601578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.455676 Jy ! Component: 100 - total flux cleaned = 0.580434 Jy ! Total flux subtracted in 100 components = 0.580434 Jy ! Clean residual min=-0.023821 max=0.061534 Jy/beam ! Clean residual mean=0.000094 rms=0.007453 Jy/beam ! Combined flux in latest and established models = 0.580434 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.580434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.217589Jy sigma=3.398826 ! Fit after self-cal, rms=0.217508Jy sigma=3.397362 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.074774 Jy ! Component: 100 - total flux cleaned = 0.123622 Jy ! Total flux subtracted in 100 components = 0.123622 Jy ! Clean residual min=-0.018018 max=0.040468 Jy/beam ! Clean residual mean=0.000063 rms=0.004978 Jy/beam ! Combined flux in latest and established models = 0.704056 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.704056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156405Jy sigma=2.440903 ! Fit after self-cal, rms=0.156200Jy sigma=2.437649 ! Inverting map ! Added new window around map position (-1.6, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442724 Jy ! Component: 100 - total flux cleaned = 0.0755803 Jy ! Total flux subtracted in 100 components = 0.0755803 Jy ! Clean residual min=-0.014044 max=0.022733 Jy/beam ! Clean residual mean=0.000047 rms=0.003708 Jy/beam ! Combined flux in latest and established models = 0.779636 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.779636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125302Jy sigma=1.961335 ! Fit after self-cal, rms=0.124728Jy sigma=1.947683 ! Inverting map ! Added new window around map position (-0.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272204 Jy ! Component: 100 - total flux cleaned = 0.048541 Jy ! Total flux subtracted in 100 components = 0.048541 Jy ! Clean residual min=-0.012039 max=0.017038 Jy/beam ! Clean residual mean=0.000036 rms=0.003010 Jy/beam ! Combined flux in latest and established models = 0.828177 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.828177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107971Jy sigma=1.698227 ! Fit after self-cal, rms=0.107814Jy sigma=1.694204 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7897 mas, bmaj=1.978 mas, bpa=-4.119 degrees ! Estimated noise=0.402069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382678 Jy ! Component: 100 - total flux cleaned = 0.0651122 Jy ! Component: 150 - total flux cleaned = 0.0848208 Jy ! Component: 200 - total flux cleaned = 0.0999073 Jy ! Total flux subtracted in 200 components = 0.0999073 Jy ! Clean residual min=-0.013954 max=0.020518 Jy/beam ! Clean residual mean=0.000038 rms=0.003795 Jy/beam ! Combined flux in latest and established models = 0.928084 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 113 components and 0.928084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085740Jy sigma=1.384051 ! Fit after self-cal, rms=0.085286Jy sigma=1.374380 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7897 x 1.978 at -4.119 degrees (North through East) ! Clean map min=-0.012233 max=0.62301 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.01 KP 0.94 ! LA 0.99 MK 1.00 NL 1.09 OV 0.94 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.01 KP 0.96 ! LA 1.00 MK 1.00 NL 1.09 OV 0.93 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.00 KP 0.95 ! LA 0.99 MK 1.00 NL 1.10 OV 0.95 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.01 KP 0.94 ! LA 0.99 MK 1.02 NL 1.09 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.01 KP 0.94 ! LA 0.99 MK 1.02 NL 1.10 OV 0.95 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.01 KP 0.95 ! LA 0.99 MK 1.01 NL 1.10 OV 0.94 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.02 KP 0.94 ! LA 0.98 MK 1.01 NL 1.09 OV 0.95 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.01 KP 0.94 ! LA 0.99 MK 1.00 NL 1.10 OV 0.94 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.02 KP 0.94 ! LA 0.98 MK 1.01 NL 1.09 OV 0.95 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.01 KP 0.97 ! LA 1.00 MK 0.99 NL 1.11 OV 0.94 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.03 KP 0.96 ! LA 0.99 MK 1.02 NL 1.10 OV 0.96 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.05 KP 0.94 ! LA 1.00 MK 1.02 NL 1.10 OV 0.95 ! PT 0.93 SC 0.99 ! ! ! Fit before self-cal, rms=0.085286Jy sigma=1.374380 ! Fit after self-cal, rms=0.067802Jy sigma=1.115031 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7937 mas, bmaj=1.995 mas, bpa=-3.944 degrees ! Estimated noise=0.400435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720235 Jy ! Component: 100 - total flux cleaned = 0.00910432 Jy ! Component: 150 - total flux cleaned = 0.0103737 Jy ! Component: 200 - total flux cleaned = 0.011221 Jy ! Total flux subtracted in 200 components = 0.011221 Jy ! Clean residual min=-0.006370 max=0.006511 Jy/beam ! Clean residual mean=0.000005 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.939305 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 140 components and 0.939305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064881Jy sigma=1.068882 ! Fit after self-cal, rms=0.064752Jy sigma=1.066758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064752Jy sigma=1.066758 ! Fit after self-cal, rms=0.064112Jy sigma=1.057776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7924 mas, bmaj=1.993 mas, bpa=-3.931 degrees ! Estimated noise=0.399731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146417 Jy ! Component: 100 - total flux cleaned = 0.00201868 Jy ! Component: 150 - total flux cleaned = 0.00230654 Jy ! Component: 200 - total flux cleaned = 0.00282495 Jy ! Total flux subtracted in 200 components = 0.00282495 Jy ! Clean residual min=-0.004657 max=0.005622 Jy/beam ! Clean residual mean=0.000003 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.94213 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.94213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063257Jy sigma=1.044192 ! Fit after self-cal, rms=0.063199Jy sigma=1.043352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475046 Jy ! Component: 100 - total flux cleaned = 0.00528968 Jy ! Component: 150 - total flux cleaned = 0.00576963 Jy ! Component: 200 - total flux cleaned = 0.00631454 Jy ! Total flux subtracted in 200 components = 0.00631454 Jy ! Clean residual min=-0.004143 max=0.004532 Jy/beam ! Clean residual mean=0.000001 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.948444 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 0.948444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062600Jy sigma=1.034119 ! Fit after self-cal, rms=0.062585Jy sigma=1.033874 ! Inverting map ! Added new window around map position (-4.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035853 Jy ! Component: 100 - total flux cleaned = 0.00403117 Jy ! Component: 150 - total flux cleaned = 0.00413718 Jy ! Component: 200 - total flux cleaned = 0.00440634 Jy ! Total flux subtracted in 200 components = 0.00440634 Jy ! Clean residual min=-0.003913 max=0.004057 Jy/beam ! Clean residual mean=0.000003 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.952851 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 192 components and 0.952851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062170Jy sigma=1.027230 ! Fit after self-cal, rms=0.062155Jy sigma=1.026994 ! Inverting map ! Added new window around map position (11.2, 15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324941 Jy ! Component: 100 - total flux cleaned = 0.00385737 Jy ! Component: 150 - total flux cleaned = 0.00401089 Jy ! Component: 200 - total flux cleaned = 0.00415934 Jy ! Total flux subtracted in 200 components = 0.00415934 Jy ! Clean residual min=-0.003531 max=0.003495 Jy/beam ! Clean residual mean=0.000003 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.95701 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 207 components and 0.95701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061868Jy sigma=1.022658 ! Fit after self-cal, rms=0.061858Jy sigma=1.022501 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061858Jy sigma=1.022501 ! Fit after self-cal, rms=0.061539Jy sigma=1.019217 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7915 mas, bmaj=1.992 mas, bpa=-3.934 degrees ! Estimated noise=0.399201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190182 Jy ! Component: 100 - total flux cleaned = 0.000615349 Jy ! Component: 150 - total flux cleaned = 0.00124207 Jy ! Component: 200 - total flux cleaned = 0.00173604 Jy ! Total flux subtracted in 200 components = 0.00173604 Jy ! Clean residual min=-0.003079 max=0.002914 Jy/beam ! Clean residual mean=0.000002 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.958746 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 218 components and 0.958746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061309Jy sigma=1.015617 ! Fit after self-cal, rms=0.061302Jy sigma=1.015479 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83705e-05 Jy ! Component: 100 - total flux cleaned = 0.000201193 Jy ! Component: 150 - total flux cleaned = 0.000313882 Jy ! Component: 200 - total flux cleaned = 0.000421569 Jy ! Total flux subtracted in 200 components = 0.000421569 Jy ! Clean residual min=-0.003010 max=0.002810 Jy/beam ! Clean residual mean=0.000002 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.959168 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 223 components and 0.959168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061195Jy sigma=1.013772 ! Fit after self-cal, rms=0.061191Jy sigma=1.013708 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061191Jy sigma=1.013708 ! Fit after self-cal, rms=0.061110Jy sigma=1.013035 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.073 mas, bmaj=4.05 mas, bpa=-5.05 degrees ! Estimated noise=0.566887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072346 Jy ! Component: 100 - total flux cleaned = 0.00119621 Jy ! Component: 150 - total flux cleaned = 0.00108157 Jy ! Component: 200 - total flux cleaned = 0.0010309 Jy ! Total flux subtracted in 200 components = 0.0010309 Jy ! Clean residual min=-0.003255 max=0.003020 Jy/beam ! Clean residual mean=0.000003 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.960198 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 242 components and 0.960198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061054Jy sigma=1.012314 ! Fit after self-cal, rms=0.061053Jy sigma=1.012271 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.37809e-05 Jy ! Component: 100 - total flux cleaned = -0.000107969 Jy ! Component: 150 - total flux cleaned = -0.000108375 Jy ! Component: 200 - total flux cleaned = -7.39515e-05 Jy ! Total flux subtracted in 200 components = -7.39515e-05 Jy ! Clean residual min=-0.003229 max=0.002887 Jy/beam ! Clean residual mean=0.000003 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.960124 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 250 components and 0.960124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061043Jy sigma=1.012236 ! Fit after self-cal, rms=0.061042Jy sigma=1.012217 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7912 mas, bmaj=1.992 mas, bpa=-3.944 degrees ! Estimated noise=0.399097 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7912 x 1.992 at -3.944 degrees (North through East) ! Clean map min=-0.0043694 max=0.61546 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061042Jy sigma=1.012217 ! Fit after self-cal, rms=0.057668Jy sigma=0.944307 ! Inverting map and beam ! Estimated beam: bmin=0.7914 mas, bmaj=1.992 mas, bpa=-3.97 degrees ! Estimated noise=0.39957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732317 Jy ! Component: 100 - total flux cleaned = 0.00107987 Jy ! Component: 150 - total flux cleaned = 0.0012325 Jy ! Component: 200 - total flux cleaned = 0.00132473 Jy ! Total flux subtracted in 200 components = 0.00132473 Jy ! Clean residual min=-0.002725 max=0.002577 Jy/beam ! Clean residual mean=0.000002 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.961449 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 263 components and 0.961449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057560Jy sigma=0.942667 ! Fit after self-cal, rms=0.057554Jy sigma=0.942546 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199017 Jy ! Component: 100 - total flux cleaned = 0.000156917 Jy ! Component: 150 - total flux cleaned = 0.00019586 Jy ! Component: 200 - total flux cleaned = 0.000269449 Jy ! Total flux subtracted in 200 components = 0.000269449 Jy ! Clean residual min=-0.002714 max=0.002422 Jy/beam ! Clean residual mean=0.000002 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.961719 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 273 components and 0.961719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057498Jy sigma=0.941678 ! Fit after self-cal, rms=0.057495Jy sigma=0.941617 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057495Jy sigma=0.941617 ! Fit after self-cal, rms=0.057455Jy sigma=0.941350 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6329 mas, bmaj=1.69 mas, bpa=-4.696 degrees ! Estimated noise=0.599426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.453565 Jy ! Component: 100 - total flux cleaned = 0.578783 Jy ! Component: 150 - total flux cleaned = 0.654711 Jy ! Component: 200 - total flux cleaned = 0.70795 Jy ! Total flux subtracted in 200 components = 0.70795 Jy ! Clean residual min=-0.012181 max=0.029753 Jy/beam ! Clean residual mean=0.000047 rms=0.004108 Jy/beam ! Combined flux in latest and established models = 0.70795 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.70795 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7912 mas, bmaj=1.992 mas, bpa=-3.982 degrees ! Estimated noise=0.399493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685597 Jy ! Component: 100 - total flux cleaned = 0.112027 Jy ! Component: 150 - total flux cleaned = 0.141419 Jy ! Component: 200 - total flux cleaned = 0.162387 Jy ! Total flux subtracted in 200 components = 0.162387 Jy ! Clean residual min=-0.006302 max=0.012177 Jy/beam ! Clean residual mean=0.000026 rms=0.002320 Jy/beam ! Combined flux in latest and established models = 0.870337 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 84 components and 0.870338 Jy ! Inverting map ! Added new window around map position (-9.2, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015731 Jy ! Component: 100 - total flux cleaned = 0.0279173 Jy ! Component: 150 - total flux cleaned = 0.0376354 Jy ! Component: 200 - total flux cleaned = 0.0455337 Jy ! Total flux subtracted in 200 components = 0.0455337 Jy ! Clean residual min=-0.003993 max=0.005699 Jy/beam ! Clean residual mean=0.000011 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.915871 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 152 components and 0.915871 Jy ! Inverting map ! Added new window around map position (9.2, -17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672361 Jy ! Component: 100 - total flux cleaned = 0.0123197 Jy ! Component: 150 - total flux cleaned = 0.0170997 Jy ! Component: 200 - total flux cleaned = 0.0211984 Jy ! Total flux subtracted in 200 components = 0.0211984 Jy ! Clean residual min=-0.003015 max=0.003716 Jy/beam ! Clean residual mean=0.000006 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.93707 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 193 components and 0.937069 Jy ! Inverting map ! Added new window around map position (5.2, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039367 Jy ! Component: 100 - total flux cleaned = 0.00713724 Jy ! Component: 150 - total flux cleaned = 0.00993835 Jy ! Component: 200 - total flux cleaned = 0.0123991 Jy ! Total flux subtracted in 200 components = 0.0123991 Jy ! Clean residual min=-0.002484 max=0.002705 Jy/beam ! Clean residual mean=0.000004 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.949468 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 223 components and 0.949469 Jy ! Inverting map ! Added new window around map position (0, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002771 Jy ! Component: 100 - total flux cleaned = 0.00482875 Jy ! Component: 150 - total flux cleaned = 0.00649904 Jy ! Component: 200 - total flux cleaned = 0.00779815 Jy ! Total flux subtracted in 200 components = 0.00779815 Jy ! Clean residual min=-0.002338 max=0.002153 Jy/beam ! Clean residual mean=0.000003 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.957267 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 256 components and 0.957267 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=4.05 mas, bpa=-5.043 degrees ! Estimated noise=0.567637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268914 Jy ! Component: 100 - total flux cleaned = 0.00426848 Jy ! Component: 150 - total flux cleaned = 0.00510767 Jy ! Component: 200 - total flux cleaned = 0.00560255 Jy ! Total flux subtracted in 200 components = 0.00560255 Jy ! Clean residual min=-0.003016 max=0.002977 Jy/beam ! Clean residual mean=0.000004 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.96287 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388452 Jy ! Component: 100 - total flux cleaned = 0.000736054 Jy ! Component: 150 - total flux cleaned = 0.000976701 Jy ! Component: 200 - total flux cleaned = 0.00119891 Jy ! Total flux subtracted in 200 components = 0.00119891 Jy ! Clean residual min=-0.002891 max=0.002846 Jy/beam ! Clean residual mean=0.000004 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.964069 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 321 components and 0.964068 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7912 mas, bmaj=1.992 mas, bpa=-3.982 degrees ! Estimated noise=0.399493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129342 Jy ! Component: 100 - total flux cleaned = -8.42347e-05 Jy ! Component: 150 - total flux cleaned = 1.4673e-06 Jy ! Component: 200 - total flux cleaned = 0.000123387 Jy ! Total flux subtracted in 200 components = 0.000123387 Jy ! Clean residual min=-0.002217 max=0.001997 Jy/beam ! Clean residual mean=0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.964192 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 346 components and 0.964192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057197Jy sigma=0.937535 ! Fit after self-cal, rms=0.057169Jy sigma=0.937087 wmodel J0754-1147_X_map.mod ! Writing 346 model components to file: J0754-1147_X_map.mod wobs J0754-1147_X_uvs.fits ! Writing UV FITS file: J0754-1147_X_uvs.fits wwins J0754-1147_X_map.win ! wwins: Wrote 12 windows to J0754-1147_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000272864 Jy ! Component: 100 - total flux cleaned = -0.000273489 Jy ! Component: 150 - total flux cleaned = -0.000113825 Jy ! Component: 200 - total flux cleaned = -8.351e-05 Jy ! Component: 250 - total flux cleaned = -8.32071e-05 Jy ! Component: 300 - total flux cleaned = 6.13664e-05 Jy ! Component: 350 - total flux cleaned = 6.13066e-05 Jy ! Component: 400 - total flux cleaned = 0.000116105 Jy ! Component: 450 - total flux cleaned = 0.000168862 Jy ! Component: 500 - total flux cleaned = 0.000167763 Jy ! Component: 550 - total flux cleaned = 0.000193332 Jy ! Component: 600 - total flux cleaned = 0.000269044 Jy ! Component: 650 - total flux cleaned = 0.000392573 Jy ! Component: 700 - total flux cleaned = 0.000514128 Jy ! Component: 750 - total flux cleaned = 0.000657448 Jy ! Component: 800 - total flux cleaned = 0.00072814 Jy ! Component: 850 - total flux cleaned = 0.000935248 Jy ! Component: 900 - total flux cleaned = 0.000935138 Jy ! Component: 950 - total flux cleaned = 0.00102436 Jy ! Component: 1000 - total flux cleaned = 0.00109014 Jy ! Component: 1050 - total flux cleaned = 0.00117639 Jy ! Component: 1100 - total flux cleaned = 0.00117712 Jy ! Component: 1150 - total flux cleaned = 0.00130378 Jy ! Component: 1200 - total flux cleaned = 0.00136614 Jy ! Component: 1250 - total flux cleaned = 0.00136636 Jy ! Component: 1300 - total flux cleaned = 0.00140715 Jy ! Component: 1350 - total flux cleaned = 0.00148665 Jy ! Component: 1400 - total flux cleaned = 0.00148667 Jy ! Component: 1450 - total flux cleaned = 0.00146696 Jy ! Component: 1500 - total flux cleaned = 0.00144797 Jy ! Component: 1550 - total flux cleaned = 0.0014858 Jy ! Component: 1600 - total flux cleaned = 0.00148594 Jy ! Component: 1650 - total flux cleaned = 0.00152284 Jy ! Component: 1700 - total flux cleaned = 0.00150451 Jy ! Component: 1750 - total flux cleaned = 0.00148658 Jy ! Component: 1800 - total flux cleaned = 0.00152237 Jy ! Component: 1850 - total flux cleaned = 0.00150444 Jy ! Component: 1900 - total flux cleaned = 0.00150408 Jy ! Component: 1950 - total flux cleaned = 0.00150383 Jy ! Component: 2000 - total flux cleaned = 0.00148671 Jy ! Component: 2050 - total flux cleaned = 0.00140268 Jy ! Component: 2100 - total flux cleaned = 0.00138603 Jy ! Component: 2150 - total flux cleaned = 0.00138616 Jy ! Component: 2200 - total flux cleaned = 0.00135375 Jy ! Component: 2250 - total flux cleaned = 0.00135406 Jy ! Component: 2300 - total flux cleaned = 0.00138619 Jy ! Component: 2350 - total flux cleaned = 0.00138607 Jy ! Component: 2400 - total flux cleaned = 0.00137037 Jy ! Component: 2450 - total flux cleaned = 0.00140105 Jy ! Component: 2500 - total flux cleaned = 0.00135474 Jy ! Component: 2550 - total flux cleaned = 0.00141594 Jy ! Component: 2600 - total flux cleaned = 0.00141577 Jy ! Component: 2650 - total flux cleaned = 0.00137095 Jy ! Component: 2700 - total flux cleaned = 0.00140077 Jy ! Component: 2750 - total flux cleaned = 0.00143014 Jy ! Component: 2800 - total flux cleaned = 0.00141547 Jy ! Component: 2850 - total flux cleaned = 0.001459 Jy ! Component: 2900 - total flux cleaned = 0.00135883 Jy ! Component: 2950 - total flux cleaned = 0.00142984 Jy ! Component: 3000 - total flux cleaned = 0.00144399 Jy ! Component: 3050 - total flux cleaned = 0.00143013 Jy ! Component: 3100 - total flux cleaned = 0.00141628 Jy ! Component: 3150 - total flux cleaned = 0.00144382 Jy ! Component: 3200 - total flux cleaned = 0.00141669 Jy ! Component: 3250 - total flux cleaned = 0.0014164 Jy ! Component: 3300 - total flux cleaned = 0.00138963 Jy ! Component: 3350 - total flux cleaned = 0.00142945 Jy ! Component: 3400 - total flux cleaned = 0.00140306 Jy ! Component: 3450 - total flux cleaned = 0.00135072 Jy ! Component: 3500 - total flux cleaned = 0.00135062 Jy ! Component: 3550 - total flux cleaned = 0.00132494 Jy ! Component: 3600 - total flux cleaned = 0.00132475 Jy ! Component: 3650 - total flux cleaned = 0.00126147 Jy ! Component: 3700 - total flux cleaned = 0.00126141 Jy ! Component: 3750 - total flux cleaned = 0.00117421 Jy ! Component: 3800 - total flux cleaned = 0.00122342 Jy ! Component: 3850 - total flux cleaned = 0.00116188 Jy ! Component: 3900 - total flux cleaned = 0.00113757 Jy ! Component: 3950 - total flux cleaned = 0.00114951 Jy ! Component: 4000 - total flux cleaned = 0.00113749 Jy ! Component: 4050 - total flux cleaned = 0.00112566 Jy ! Total flux subtracted in 4096 components = 0.00113739 Jy ! Clean residual min=-0.000696 max=0.000654 Jy/beam ! Clean residual mean=0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.965329 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 662 components and 0.965329 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0754-1147_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7912 x 1.992 at -3.982 degrees (North through East) ! Clean map min=-0.0014318 max=0.61697 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0754-1147_X_map.fits wmodel /vlbi/uf001/uva//J0754-1147_X_map.mod ! Writing 662 model components to file: /vlbi/uf001/uva//J0754-1147_X_map.mod wobs /vlbi/uf001/uva//J0754-1147_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0754-1147_X_uvs.fits wwins /vlbi/uf001/uva//J0754-1147_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J0754-1147_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.616969 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207404 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.10085 0.10085 0.201699 0.403398 0.806797 1.61359 3.22719 6.45437 12.9087 25.8175 51.635 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.616 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2974.73 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0754-1147_X_dfm.log closed on Sun Jan 13 23:42:09 2019